[lldb] [gdb-remote] Move ReadPacketWithOutputSupport() to client

Move ReadPacketWithOutputSupport() from GDBRemoteCommunication
to GDBRemoteClientBase. This function is client-specific and moving
i

[lldb] [gdb-remote] Move ReadPacketWithOutputSupport() to client

Move ReadPacketWithOutputSupport() from GDBRemoteCommunication
to GDBRemoteClientBase. This function is client-specific and moving
it there simplifies followup patches that split communication into
separate thread.

Sponsored by: The FreeBSD Foundation

Differential Revision: https://reviews.llvm.org/D135028

show more ...

[gdb-remote] Move broadcasting logic down to GDBRemoteClientBase

Move the broadcasting support from GDBRemoteCommunication
to GDBRemoteClientBase since this is where it is actually used. Remove
GDB

[gdb-remote] Move broadcasting logic down to GDBRemoteClientBase

Move the broadcasting support from GDBRemoteCommunication
to GDBRemoteClientBase since this is where it is actually used. Remove
GDBRemoteCommunication and subclass constructor arguments left over
after Communication cleanup.

Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.llvm.org/D133427

show more ...

Revert "[lldb] [gdb-remote] Send interrupt packets from async thread"

This reverts commit 446b61cff4ea0cb7e7fcc5e0fec7bc749d379b08. Of course
it does not work on Windows.

[lldb] [gdb-remote] Send interrupt packets from async thread

Refactor the mechanism for sending interrupt packets to send them
from async thread (i.e. the same thread that sends the continue packet

[lldb] [gdb-remote] Send interrupt packets from async thread

Refactor the mechanism for sending interrupt packets to send them
from async thread (i.e. the same thread that sends the continue packet
preceding them and that waits for the response), rather than from
the thread requesting the interrupt. This is going to become especially
important when using the vCtrlC packet as part of the non-stop protocol,
as -- unlike the simple ^c sent in the all-stop mode -- this packet
involves an explicit reply.

Suggested by Pavel Labath in D126614.

Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.llvm.org/D131075

show more ...

[lldb] Remove non-stop mode code

We added some support for this mode back in 2015, but the feature was
never productionized. It is completely untested, and there are known
major structural lldb issu

[lldb] Remove non-stop mode code

We added some support for this mode back in 2015, but the feature was
never productionized. It is completely untested, and there are known
major structural lldb issues that need to be resolved before this
feature can really be supported.

It also complicates making further changes to stop reply packet
handling, which is what I am about to do.

Differential Revision: https://reviews.llvm.org/D110553

show more ...

Revert "Revert "Reset the wakeup timeout when we re-enter the continue wait.""

This reverts commit 82a38837150099288a1262391ef43e1fd69ffde4.

The original version had a copy-paste error: using the I

Revert "Revert "Reset the wakeup timeout when we re-enter the continue wait.""

This reverts commit 82a38837150099288a1262391ef43e1fd69ffde4.

The original version had a copy-paste error: using the Interrupt timeout
for the ResumeSynchronous wait, which is clearly wrong. This error would
have been evident with real use, but the interrupt is long enough that it
only caused one testsuite failure (in the Swift fork).

Anyway, I found that mistake and fixed it and checked all the other places
where I had to plumb through a timeout, and added a test with a short
interrupt timeout stepping over a function that takes 3x the interrupt timeout
to complete, so that should detect a similar mistake in the future.

show more ...

Revert "Reset the wakeup timeout when we re-enter the continue wait."

This reverts commit bd5751f3d249ec0798060bd98c07272174c52af0.
This patch series is causing us to every so often miss switching
t

Revert "Reset the wakeup timeout when we re-enter the continue wait."

This reverts commit bd5751f3d249ec0798060bd98c07272174c52af0.
This patch series is causing us to every so often miss switching
the state from eStateRunning to eStateStopped when we get the stop
packet from the debug server.

Reverting till I can figure out how that could be happening.

show more ...

Add an "interrupt timeout" to Process, and pipe that through the
ProcessGDBRemote plugin layers.

Also fix a bug where if we tried to interrupt, but the ReadPacket
wakeup timer woke us up just after

Add an "interrupt timeout" to Process, and pipe that through the
ProcessGDBRemote plugin layers.

Also fix a bug where if we tried to interrupt, but the ReadPacket
wakeup timer woke us up just after the timeout, we would break out
the switch, but then since we immediately check if the response is
empty & fail if it is, we could end up actually only giving a
small interval to the interrupt.

Differential Revision: https://reviews.llvm.org/D102085

show more ...

[lldb] Update header guards to be consistent and compliant with LLVM (NFC)

LLDB has a few different styles of header guards and they're not very
consistent because things get moved around or copy/pa

[lldb] Update header guards to be consistent and compliant with LLVM (NFC)

LLDB has a few different styles of header guards and they're not very
consistent because things get moved around or copy/pasted. This patch
unifies the header guards across LLDB and converts everything to match
LLVM's style.

Differential revision: https://reviews.llvm.org/D74743

show more ...

[GDBRemote] Reflow comments and improve docs.

Improved the GDB client base documentation while I was reading through
it. Looks like it got messed up during the automatic comment reflow a
while ago.

[GDBRemote] Reflow comments and improve docs.

Improved the GDB client base documentation while I was reading through
it. Looks like it got messed up during the automatic comment reflow a
while ago.

llvm-svn: 367481

show more ...

Bring Doxygen comment syntax in sync with LLVM coding style.
This changes '@' prefix to '\'.

llvm-svn: 355841

Update the file headers across all of the LLVM projects in the monorepo
to reflect the new license.

We understand that people may be surprised that we're moving the header
entirely to discuss the ne

Update the file headers across all of the LLVM projects in the monorepo
to reflect the new license.

We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.

Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.

llvm-svn: 351636

show more ...

Handle O reply packets during qRcmd

Summary:
Gdb servers like openocd may send many $O reply packets for the client to output during a qRcmd command sequence. Currently, lldb interprets the first O

Handle O reply packets during qRcmd

Summary:
Gdb servers like openocd may send many $O reply packets for the client to output during a qRcmd command sequence. Currently, lldb interprets the first O packet as an unexpected response. Besides generating no output, this causes lldb to get out of sync with future commands because it continues reading O packets from the first command as response to subsequent commands.

This patch handles any O packets during an qRcmd, treating the first non-O packet as the true response.

Preliminary discussion at http://lists.llvm.org/pipermail/lldb-dev/2018-January/013078.html

Reviewers: clayborg

Reviewed By: clayborg

Subscribers: labath, lldb-commits

Differential Revision: https://reviews.llvm.org/D41745
Patch by Owen Shaw <llvm@owenpshaw.net>

llvm-svn: 322190

show more ...

[gdb-remote] Remove the const char * version of SendPacketAndWaitForResponse

Switch all callers to use the StringRef version.

llvm-svn: 282236

async structured data packet handling improvements

This change does the following:
* Changes the signature for the continuation delegate method that handles
async structured data from accepting an

async structured data packet handling improvements

This change does the following:
* Changes the signature for the continuation delegate method that handles
async structured data from accepting an already-parsed structured data
element to taking just the packet contents.
* Moves the conversion of the JSON-async: packet contents from
GDBRemoteClientBase to the continuation delegate method.
* Adds a new unit test for verifying that the $JSON-asyc: packets get
decoded and that the decoded packets get forwarded on to the delegate
for further processing. Thanks to Pavel for making that whole section of
code easily unit testable!
* Tightens up the packet verification on reception of a $JSON-async:
packet contents. The code prior to this change is susceptible to a
segfault if a packet is carefully crafted that starts with $J but
has a total length shorter than the length of "$JSON-async:".

Reviewers: labath, clayborg, zturner

Differential Revision: https://reviews.llvm.org/D23884

llvm-svn: 281121

show more ...

*** This commit represents a complete reformatting of the LLDB source code
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:

Firstly, merging t

*** This commit represents a complete reformatting of the LLDB source code
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:

Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):

find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;

The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.

Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.

llvm-svn: 280751

show more ...

Revert "gdb-remote: Make the sequence mutex non-recursive"

This reverts commit r279725 as it breaks "dynamic register size" feature of mips.

llvm-svn: 280088

gdb-remote: Make the sequence mutex non-recursive

Summary:
This is a preparatory commit for D22914, where I'd like to replace this mutex by an R/W lock
(which is also not recursive). This required a

gdb-remote: Make the sequence mutex non-recursive

Summary:
This is a preparatory commit for D22914, where I'd like to replace this mutex by an R/W lock
(which is also not recursive). This required a couple of changes:
- The only caller of Read/WriteRegister, GDBRemoteRegisterContext class, was already acquiring
the mutex, so these functions do not need to. All functions which now do not take a lock, take
an lock argument instead, to remind the caller of this fact.
- GetThreadSuffixSupported() was being called from locked and unlocked contexts (including
contexts where the process was running, and the call would fail if it did not have the result
cached). I have split this into two functions, one which computes the thread suffix support and
caches it (this one always takes the lock), and another, which returns the cached value (and
never needs to take the lock). This feels quite natural as ProcessGdbRemote was already
pre-caching this value at the start.

Reviewers: clayborg

Subscribers: lldb-commits

Differential Revision: https://reviews.llvm.org/D23802

llvm-svn: 279725

show more ...

Add StructuredData plugin type; showcase with new DarwinLog feature

Take 2, with missing cmake line fixed. Build tested on
Ubuntu 14.04 with clang-3.6.

See docs/structured_data/StructuredDataPlugi

Add StructuredData plugin type; showcase with new DarwinLog feature

Take 2, with missing cmake line fixed. Build tested on
Ubuntu 14.04 with clang-3.6.

See docs/structured_data/StructuredDataPlugins.md for details.

differential review: https://reviews.llvm.org/D22976

reviewers: clayborg, jingham
llvm-svn: 279202

show more ...

Revert "Add StructuredData plugin type; showcase with new DarwinLog feature"

This reverts commit 1d885845d1451e7b232f53fba2e36be67aadabd8.

llvm-svn: 279200

Add StructuredData plugin type; showcase with new DarwinLog feature

See docs/structured_data/StructuredDataPlugins.md for details.

differential review: https://reviews.llvm.org/D22976

reviewers: c

Add StructuredData plugin type; showcase with new DarwinLog feature

See docs/structured_data/StructuredDataPlugins.md for details.

differential review: https://reviews.llvm.org/D22976

reviewers: clayborg, jingham
llvm-svn: 279198

show more ...

Reapply "Rewrite gdb-remote's SendContinuePacketAndWaitForResponse"

Resumbitting the commit after fixing the following problems:
- broken unit tests on windows: incorrect gtest usage on my part (TES

Reapply "Rewrite gdb-remote's SendContinuePacketAndWaitForResponse"

Resumbitting the commit after fixing the following problems:
- broken unit tests on windows: incorrect gtest usage on my part (TEST vs. TEST_F)
- the new code did not correctly handle the case where we went to interrupt the process, but it
stopped due to a different reason - the interrupt request would remain queued and would
interfere with the following "continue". I also added a unit test for this case.

This reapplies r277156 and r277139.

llvm-svn: 278118

show more ...

Rewrite gdb-remote's SendContinuePacketAndWaitForResponse

SendContinuePacketAndWaitForResponse was huge function with very complex interactions with
several other functions (SendAsyncSignal, SendInt

Rewrite gdb-remote's SendContinuePacketAndWaitForResponse

SendContinuePacketAndWaitForResponse was huge function with very complex interactions with
several other functions (SendAsyncSignal, SendInterrupt, SendPacket). This meant that making any
changes to how packet sending functions and threads interact was very difficult and error-prone.

This change does not add any functionality yet, it merely paves the way for future changes. In a
follow-up, I plan to add the ability to have multiple query packets in flight (i.e.,
request,request,response,response instead of the usual request,response sequences) and use that
to speed up qModuleInfo packet processing.

Here, I introduce two special kinds of locks: ContinueLock, which is used by the continue thread,
and Lock, which is used by everyone else. ContinueLock (atomically) sends a continue packet, and
blocks any other async threads from accessing the connection. Other threads create an instance of
the Lock object when they want to access the connection. This object, while in scope prevents the
continue from being send. Optionally, it can also interrupt the process to gain access to the
connection for async processing.

Most of the syncrhonization logic is encapsulated within these two classes. Some of it still
had to bleed over into the SendContinuePacketAndWaitForResponse, but the function is still much
more manageable than before -- partly because of most of the work is done in the ContinueLock
class, and partly because I have factored out a lot of the packet processing code separate
functions (this also makes the functionality more easily testable). Most importantly, there is
none of syncrhonization code in the async thread users -- as far as they are concerned, they just
need to declare a Lock object, and they are good to go (SendPacketAndWaitForResponse is now a
very thin wrapper around the NoLock version of the function, whereas previously it had over 100
lines of synchronization code). This will make my follow up changes there easy.

I have written a number of unit tests for the new code and I have ran the test suite on linux and
osx with no regressions.

Subscribers: tberghammer

Differential Revision: https://reviews.llvm.org/D22629

llvm-svn: 277139

show more ...