[Sparc] Remove LEA instructions (NFCI) (#65850)

LEA_ADDri and LEAX_ADDri are printed / encoded the same way as ADDri. I
had to change the type of simm13Op so that it can be used in both 32-
and 64

[Sparc] Remove LEA instructions (NFCI) (#65850)

LEA_ADDri and LEAX_ADDri are printed / encoded the same way as ADDri. I
had to change the type of simm13Op so that it can be used in both 32-
and 64-bit modes. This required the changes in operands of some
InstAliases.

show more ...

[SPARC][IAS] Add complete set of v9 ASI load, store & swap forms

This extends support for ASI-tagged loads, stores, and swaps with the new
stored-ASI form ([reg+imm] %asi) introduced in v9.

CAS ins

[SPARC][IAS] Add complete set of v9 ASI load, store & swap forms

This extends support for ASI-tagged loads, stores, and swaps with the new
stored-ASI form ([reg+imm] %asi) introduced in v9.

CAS instructions are handled differently by the (dis-)assembler, so it will be
handled in a separate patch.

Reviewed By: barannikov88

Differential Revision: https://reviews.llvm.org/D157233

show more ...

[SPARC][IAS] Add definitions for v9 State Registers

This adds definitions for SPARC v9 State Registers (privileged/nonprivileged,
see v9 manual ch. 5).

Reviewed By: barannikov88

Differential Revis

[SPARC][IAS] Add definitions for v9 State Registers

This adds definitions for SPARC v9 State Registers (privileged/nonprivileged,
see v9 manual ch. 5).

Reviewed By: barannikov88

Differential Revision: https://reviews.llvm.org/D157231

show more ...

Simplify with hasFeature. NFC

[SPARC] Simplify instruction decoder.

After https://reviews.llvm.org/D137653 named sub-operands can be used
in the auto-generated instruction decoders. This allows the
auto-generated decoders to wor

[SPARC] Simplify instruction decoder.

After https://reviews.llvm.org/D137653 named sub-operands can be used
in the auto-generated instruction decoders. This allows the
auto-generated decoders to work properly, so all the hand-coded
decoders in the sparc target can be removed.

In some instances, a manually-written decoder had not been implemented
for an instruction, and thus that instruction was not decoded
properly. These have been fixed (and tests added).

Differential Revision: https://reviews.llvm.org/D137727

show more ...

[TableGen] More named sub-operands work.

Commit a538d1f13a13 first added support for named sub-operands in
CodeEmitterGen. We now add a few more features to that, enabling
further target cleanups.

[TableGen] More named sub-operands work.

Commit a538d1f13a13 first added support for named sub-operands in
CodeEmitterGen. We now add a few more features to that, enabling
further target cleanups.

1. Adds support for handling an EncoderMethod in a sub-operand in
CodeEmitterGen. Previously, the specified encoder of a sub-operand was
ignored, and only the default used.

2. Adds support for sub-operands in DecoderEmitter, along with support
for tied sub-operands.

The changes to the decoder required a few minor tweaks to a few
targets, where existing brokeness was exposed. In order to keep this
patch small, I left FIXMEs which will be addressed in upcoming
patches. (Except MIPS16, since its object file emission/decoding is
totally broken).

Differential Revision: https://reviews.llvm.org/D137653

show more ...

[llvm] Use std::size instead of llvm::array_lengthof

LLVM contains a helpful function for getting the size of a C-style
array: `llvm::array_lengthof`. This is useful prior to C++17, but not as
helpf

[llvm] Use std::size instead of llvm::array_lengthof

LLVM contains a helpful function for getting the size of a C-style
array: `llvm::array_lengthof`. This is useful prior to C++17, but not as
helpful for C++17 or later: `std::size` already has support for C-style
arrays.

Change call sites to use `std::size` instead.

Differential Revision: https://reviews.llvm.org/D133429

show more ...

[MCDisassembler] Disambiguate Size parameter in tryAddingSymbolicOperand()

MCSymbolizer::tryAddingSymbolicOperand() overloaded the Size parameter
to specify either the instruction size or the operan

[MCDisassembler] Disambiguate Size parameter in tryAddingSymbolicOperand()

MCSymbolizer::tryAddingSymbolicOperand() overloaded the Size parameter
to specify either the instruction size or the operand size depending on
the architecture. However, for proper symbolic disassembly on X86, we
need to know both sizes, as an instruction can have two operands, and
the instruction size cannot be reliably calculated based on the operand
offset and its size. Hence, split Size into OpSize and InstSize.

For X86, the new interface allows to fix a couple of issues:
* Correctly adjust the value of PC-relative operands.
* Set operand size to zero when the operand is specified implicitly.

Differential Revision: https://reviews.llvm.org/D126101

show more ...

Rename `MCFixedLenDisassembler.h` as `MCDecoderOps.h`

The name `MCFixedLenDisassembler.h` is out of date after D120958.

Rename it as `MCDecoderOps.h` to reflect the change.

Reviewed By: myhsu

Dif

Rename `MCFixedLenDisassembler.h` as `MCDecoderOps.h`

The name `MCFixedLenDisassembler.h` is out of date after D120958.

Rename it as `MCDecoderOps.h` to reflect the change.

Reviewed By: myhsu

Differential Revision: https://reviews.llvm.org/D124987

show more ...

[Disassember][NFCI] Use strong type for instruction decoder

All LLVM backends use MCDisassembler as a base class for their
instruction decoders. Use "const MCDisassembler *" for the decoder
instead

[Disassember][NFCI] Use strong type for instruction decoder

All LLVM backends use MCDisassembler as a base class for their
instruction decoders. Use "const MCDisassembler *" for the decoder
instead of "const void *". Remove unnecessary static casts.

Reviewed By: skan

Differential Revision: https://reviews.llvm.org/D122245

show more ...

[llvm] Use = default (NFC)

Revert "Rename llvm::array_lengthof into llvm::size to match std::size from C++17"

This reverts commit ef8206320769ad31422a803a0d6de6077fd231d2.

- It conflicts with the existing llvm::size in STLEx

Revert "Rename llvm::array_lengthof into llvm::size to match std::size from C++17"

This reverts commit ef8206320769ad31422a803a0d6de6077fd231d2.

- It conflicts with the existing llvm::size in STLExtras, which will now
never be called.
- Calling it without llvm:: breaks C++17 compat

show more ...

Rename llvm::array_lengthof into llvm::size to match std::size from C++17

As a conquence move llvm::array_lengthof from STLExtras.h to
STLForwardCompat.h (which is included by STLExtras.h so no buil

Rename llvm::array_lengthof into llvm::size to match std::size from C++17

As a conquence move llvm::array_lengthof from STLExtras.h to
STLForwardCompat.h (which is included by STLExtras.h so no build
breakage expected).

show more ...

Move TargetRegistry.(h|cpp) from Support to MC

This moves the registry higher in the LLVM library dependency stack.
Every client of the target registry needs to link against MC anyway to
actually us

Move TargetRegistry.(h|cpp) from Support to MC

This moves the registry higher in the LLVM library dependency stack.
Every client of the target registry needs to link against MC anyway to
actually use the target, so we might as well move this out of Support.

This allows us to ensure that Support doesn't have includes from MC/*.

Differential Revision: https://reviews.llvm.org/D111454

show more ...

[SPARC] recognize the "rd %pc, reg" special form

Differential Revision: https://reviews.llvm.org/D96312

CMake: Make most target symbols hidden by default

Summary:
For builds with LLVM_BUILD_LLVM_DYLIB=ON and BUILD_SHARED_LIBS=OFF
this change makes all symbols in the target specific libraries hidden
by

CMake: Make most target symbols hidden by default

Summary:
For builds with LLVM_BUILD_LLVM_DYLIB=ON and BUILD_SHARED_LIBS=OFF
this change makes all symbols in the target specific libraries hidden
by default.

A new macro called LLVM_EXTERNAL_VISIBILITY has been added to mark symbols in these
libraries public, which is mainly needed for the definitions of the
LLVMInitialize* functions.

This patch reduces the number of public symbols in libLLVM.so by about
25%. This should improve load times for the dynamic library and also
make abi checker tools, like abidiff require less memory when analyzing
libLLVM.so

One side-effect of this change is that for builds with
LLVM_BUILD_LLVM_DYLIB=ON and LLVM_LINK_LLVM_DYLIB=ON some unittests that
access symbols that are no longer public will need to be statically linked.

Before and after public symbol counts (using gcc 8.2.1, ld.bfd 2.31.1):
nm before/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
36221
nm after/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
26278

Reviewers: chandlerc, beanz, mgorny, rnk, hans

Reviewed By: rnk, hans

Subscribers: merge_guards_bot, luismarques, smeenai, ldionne, lenary, s.egerton, pzheng, sameer.abuasal, MaskRay, wuzish, echristo, Jim, hiraditya, michaelplatings, chapuni, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, mgrang, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, kristina, jsji, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D54439

show more ...

[Disassembler] Delete the VStream parameter of MCDisassembler::getInstruction()

The argument is llvm::null() everywhere except llvm::errs() in
llvm-objdump in -DLLVM_ENABLE_ASSERTIONS=On builds. It

[Disassembler] Delete the VStream parameter of MCDisassembler::getInstruction()

The argument is llvm::null() everywhere except llvm::errs() in
llvm-objdump in -DLLVM_ENABLE_ASSERTIONS=On builds. It is used by no
target but X86 in -DLLVM_ENABLE_ASSERTIONS=On builds.

If we ever have the needs to add verbose log to disassemblers, we can
record log with a member function, instead of passing it around as an
argument.

show more ...

Revert CMake: Make most target symbols hidden by default

This reverts r362990 (git commit 374571301dc8e9bc9fdd1d70f86015de198673bd)

This was causing linker warnings on Darwin:

ld: warning: direct

Revert CMake: Make most target symbols hidden by default

This reverts r362990 (git commit 374571301dc8e9bc9fdd1d70f86015de198673bd)

This was causing linker warnings on Darwin:

ld: warning: direct access in function 'llvm::initializeEvexToVexInstPassPass(llvm::PassRegistry&)'
from file '../../lib/libLLVMX86CodeGen.a(X86EvexToVex.cpp.o)' to global weak symbol
'void std::__1::__call_once_proxy<std::__1::tuple<void* (&)(llvm::PassRegistry&),
std::__1::reference_wrapper<llvm::PassRegistry>&&> >(void*)' from file '../../lib/libLLVMCore.a(Verifier.cpp.o)'
means the weak symbol cannot be overridden at runtime. This was likely caused by different translation
units being compiled with different visibility settings.

llvm-svn: 363028

show more ...

CMake: Make most target symbols hidden by default

Summary:
For builds with LLVM_BUILD_LLVM_DYLIB=ON and BUILD_SHARED_LIBS=OFF
this change makes all symbols in the target specific libraries hidden
by

CMake: Make most target symbols hidden by default

Summary:
For builds with LLVM_BUILD_LLVM_DYLIB=ON and BUILD_SHARED_LIBS=OFF
this change makes all symbols in the target specific libraries hidden
by default.

A new macro called LLVM_EXTERNAL_VISIBILITY has been added to mark symbols in these
libraries public, which is mainly needed for the definitions of the
LLVMInitialize* functions.

This patch reduces the number of public symbols in libLLVM.so by about
25%. This should improve load times for the dynamic library and also
make abi checker tools, like abidiff require less memory when analyzing
libLLVM.so

One side-effect of this change is that for builds with
LLVM_BUILD_LLVM_DYLIB=ON and LLVM_LINK_LLVM_DYLIB=ON some unittests that
access symbols that are no longer public will need to be statically linked.

Before and after public symbol counts (using gcc 8.2.1, ld.bfd 2.31.1):
nm before/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
36221
nm after/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
26278

Reviewers: chandlerc, beanz, mgorny, rnk, hans

Reviewed By: rnk, hans

Subscribers: Jim, hiraditya, michaelplatings, chapuni, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, mgrang, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, kristina, jsji, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D54439

llvm-svn: 362990

show more ...

[Sparc] Create a TargetInfo header. NFC

Move the declarations of getThe<Name>Target() functions into a new header in
TargetInfo and make users of these functions include this new header.
This fixes

[Sparc] Create a TargetInfo header. NFC

Move the declarations of getThe<Name>Target() functions into a new header in
TargetInfo and make users of these functions include this new header.
This fixes a layering problem.

llvm-svn: 360733

show more ...

Update the file headers across all of the LLVM projects in the monorepo
to reflect the new license.

We understand that people may be surprised that we're moving the header
entirely to discuss the ne

Update the file headers across all of the LLVM projects in the monorepo
to reflect the new license.

We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.

Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.

llvm-svn: 351636

show more ...

[Target] Untangle disassemblers

Disassemblers cannot depend on main target headers. The same is true for
MCTargetDesc, but there's a lot more cleanup needed for that.

llvm-svn: 341822

Remove trailing space

sed -Ei 's/[[:space:]]+$//' include/**/*.{def,h,td} lib/**/*.{cpp,h}

llvm-svn: 338293

Sort the remaining #include lines in include/... and lib/....

I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line

Sort the remaining #include lines in include/... and lib/....

I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.

I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.

This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.

Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).

llvm-svn: 304787

show more ...

Move the global variables representing each Target behind accessor function

This avoids "static initialization order fiasco"

Differential Revision: https://reviews.llvm.org/D25412

llvm-svn: 283702