drivers: move alignment attribute on types for MSVC

Move location of __rte_aligned(a) to new conventional location. The new
placement between {struct,union} and the tag allows the desired
alignment

drivers: move alignment attribute on types for MSVC

Move location of __rte_aligned(a) to new conventional location. The new
placement between {struct,union} and the tag allows the desired
alignment to be imparted on the type regardless of the toolchain being
used for both C and C++. Additionally, it avoids confusion by Doxygen
when generating documentation.

Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>

show more ...

net/octeontx: handle port reconfiguration

Adding support for port reconfiguration as user may require to
do so on a running system.

Signed-off-by: Harman Kalra <hkalra@marvell.com>

ethdev: add namespace

Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to

ethdev: add namespace

Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.

All internal components switched to using new names.

Syntax fixed on lines that this patch touches.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>

show more ...

ethdev: remove jumbo offload flag

Removing 'DEV_RX_OFFLOAD_JUMBO_FRAME' offload flag.

Instead of drivers announce this capability, application can deduct the
capability by checking reported 'dev_in

ethdev: remove jumbo offload flag

Removing 'DEV_RX_OFFLOAD_JUMBO_FRAME' offload flag.

Instead of drivers announce this capability, application can deduct the
capability by checking reported 'dev_info.max_mtu' or
'dev_info.max_rx_pktlen'.

And instead of application setting this flag explicitly to enable jumbo
frames, this can be deduced by driver by comparing requested 'mtu' to
'RTE_ETHER_MTU'.

Removing this additional configuration for simplification.

Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>

show more ...

ethdev: make driver-only headers private

The rte_ethdev_driver.h, rte_ethdev_vdev.h and rte_ethdev_pci.h files are
for drivers only and should be a private to DPDK and not installed.

Signed-off-by:

ethdev: make driver-only headers private

The rte_ethdev_driver.h, rte_ethdev_vdev.h and rte_ethdev_pci.h files are
for drivers only and should be a private to DPDK and not installed.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Steven Webster <steven.webster@windriver.com>

show more ...

net/octeontx: fix jumbo frame flag condition for MTU set

The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition,
but the Ether overhead is larger than 18 when it supports dual VLAN tags.

net/octeontx: fix jumbo frame flag condition for MTU set

The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition,
but the Ether overhead is larger than 18 when it supports dual VLAN tags.
That will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.

This fix will change the boundary condition with 'RTE_ETHER_MTU' and
overhead, that perhaps impacts the cases of the jumbo frame related.

Fixes: 3151e6a687a3 ("net/octeontx: support MTU")
Cc: stable@dpdk.org

Signed-off-by: Steve Yang <stevex.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Harman Kalra <hkalra@marvell.com>

show more ...

net/octeontx: support Rx/Tx checksum offload

This patch implements rx/tx checksum offload. In case of
wrong checksum received (inner/outer l3/l4) it reports the
corresponding layer which has bad che

net/octeontx: support Rx/Tx checksum offload

This patch implements rx/tx checksum offload. In case of
wrong checksum received (inner/outer l3/l4) it reports the
corresponding layer which has bad checksum and also corrects
it if hw checksum is enabled on tx side.

Signed-off-by: Harman Kalra <hkalra@marvell.com>

show more ...

net/octeontx: support flow control

Patch adds ethdev flow control set/get callback ops,
pmd enables modifying flow control attributes like
rx_pause, tx_pause, high & low water mark.

Signed-off-by:

net/octeontx: support flow control

Patch adds ethdev flow control set/get callback ops,
pmd enables modifying flow control attributes like
rx_pause, tx_pause, high & low water mark.

Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Harman Kalra <hkalra@marvell.com>

show more ...

net/octeontx: support set link up/down

Adding support for setting link up/down eth operation.
It is used to enable disable lmac. Also implemented a
poll function for getting the link status at regu

net/octeontx: support set link up/down

Adding support for setting link up/down eth operation.
It is used to enable disable lmac. Also implemented a
poll function for getting the link status at regular
intervals.

Signed-off-by: Harman Kalra <hkalra@marvell.com>

show more ...

net/octeontx: support VLAN filter offload

Patch adds support for vlan filter offload support.
MBOX messages for vlan filter on/off and vlan filter
entry add/rm are added to configure PCAM entries to

net/octeontx: support VLAN filter offload

Patch adds support for vlan filter offload support.
MBOX messages for vlan filter on/off and vlan filter
entry add/rm are added to configure PCAM entries to
filter out the vlan traffic on a given port.

Patch also defines rx_offload_flag for vlan filtering.

Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Harman Kalra <hkalra@marvell.com>

show more ...

net/octeontx: support MTU

Adding support for mtu eth operation which configures mtu based
on max pkt len.

Signed-off-by: Harman Kalra <hkalra@marvell.com>

net/octeontx: support fast mbuf free

This patch adds capability to fast release of mbuf
following successful transmission.

Signed-off-by: Harman Kalra <hkalra@marvell.com>

net/octeontx: add framework for Rx/Tx offloads

Adding macro based framework to hook rx/tx burst function
pointers to the appropriate function based on rx/tx offloads.

Signed-off-by: Harman Kalra <h

net/octeontx: add framework for Rx/Tx offloads

Adding macro based framework to hook rx/tx burst function
pointers to the appropriate function based on rx/tx offloads.

Signed-off-by: Harman Kalra <hkalra@marvell.com>

show more ...

net/octeontx: support multi segment

Adding multi segment support to the octeontx PMD. Also
adding the logic to share rx/tx ofloads with the eventdev
code.

Signed-off-by: Harman Kalra <hkalra@marvel

net/octeontx: support multi segment

Adding multi segment support to the octeontx PMD. Also
adding the logic to share rx/tx ofloads with the eventdev
code.

Signed-off-by: Harman Kalra <hkalra@marvell.com>

show more ...

net/octeontx: add application domain validation

Add domain validation for PKI and PKO vfs

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>

net: add rte prefix to ether defines

Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_C

net: add rte prefix to ether defines

Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.

Do not update the command line library to avoid adding a dependency to
librte_net.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

net/octeontx: fix vdev name

The octeontx driver is creating vdev with name "OCTEONTX_PMD"
which is an artifact from how RTE_PMD_REGISTER_VDEV arguments
work.

Change to use the same convention as a

net/octeontx: fix vdev name

The octeontx driver is creating vdev with name "OCTEONTX_PMD"
which is an artifact from how RTE_PMD_REGISTER_VDEV arguments
work.

Change to use the same convention as all the other network
drivers ie "net_octeontx").

Fixes: f7be70e5130e ("net/octeontx: add net device probe and remove")
Cc: stable@dpdk.org

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

show more ...

ethdev: make default behavior CRC strip on Rx

Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.

PMDs that support keepin

ethdev: make default behavior CRC strip on Rx

Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.

PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.

Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>

show more ...

net/octeontx: fix missing offload flags

Fix missing DEV_RX_OFFLOAD_CHECKSUM flag in RX offloads.
Remove depricated txq_flags field.

Fixes: a92870896b4a ("net/octeontx: use the new offload APIs")

S

net/octeontx: fix missing offload flags

Fix missing DEV_RX_OFFLOAD_CHECKSUM flag in RX offloads.
Remove depricated txq_flags field.

Fixes: a92870896b4a ("net/octeontx: use the new offload APIs")

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>

show more ...

net/octeontx: use the new offload APIs

Use the new Rx/Tx offload APIs and remove the old style offloads.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Santosh Shukla <s

net/octeontx: use the new offload APIs

Use the new Rx/Tx offload APIs and remove the old style offloads.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>

show more ...

ethdev: separate driver APIs

Create a rte_ethdev_driver.h file and move PMD specific APIs here.
Drivers updated to include this new header file.

There is no update in header content and since ethde

ethdev: separate driver APIs

Create a rte_ethdev_driver.h file and move PMD specific APIs here.
Drivers updated to include this new header file.

There is no update in header content and since ethdev.h included by
ethdev_driver.h, nothing changed from driver point of view, only
logically grouping of APIs. From applications point of view they can't
access to driver specific APIs anymore and they shouldn't.

More PMD specific data structures still remain in ethdev.h because of
inline functions in header use them. Those will be handled separately.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>

show more ...

net/octeontx: add channel to port id mapping

The channel to port id map is used by event octeontx to map the received
wqe to the respective ethdev port.

Signed-off-by: Pavan Nikhilesh <pbhagavatula

net/octeontx: add channel to port id mapping

The channel to port id map is used by event octeontx to map the received
wqe to the respective ethdev port.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>

show more ...

drivers: use SPDX tag for Cavium copyright files

Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

net/octeontx: add Tx queue start and stop

Mark "Queue start/stop" as P as its been implemented only for tx queue.

Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh

net/octeontx: add Tx queue start and stop

Mark "Queue start/stop" as P as its been implemented only for tx queue.

Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>

show more ...

net/octeontx: add Rx queue setup and release ops

Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>