[lldb] Fix a warning

This patch fixes:

lldb/source/Plugins/Process/elf-core/ThreadElfCore.cpp:53:32: error:
field 'm_thread_reg_ctx_sp' will be initialized after field
'm_thread_name' [-Werro

[lldb] Fix a warning

This patch fixes:

lldb/source/Plugins/Process/elf-core/ThreadElfCore.cpp:53:32: error:
field 'm_thread_reg_ctx_sp' will be initialized after field
'm_thread_name' [-Werror,-Wreorder-ctor]

show more ...

[LLDB][ProcessELFCore] Add Description to ProcessELFCore/ELFThread stop reasons (#110065)

This fixes a functionality gap with GDB, where GDB will properly decode
the stop reason and give the addres

[LLDB][ProcessELFCore] Add Description to ProcessELFCore/ELFThread stop reasons (#110065)

This fixes a functionality gap with GDB, where GDB will properly decode
the stop reason and give the address for SIGSEGV. I also added
descriptions to all stop reasons, following the same code path that the
Native Linux Thread uses.

show more ...

[lldb][LoongArch64] Add support for LoongArch64 in elf-core for lldb (#112296)

When using the lldb command 'target create --core' on the LoongArch64
architecture, this part of the code is required.

[lldb] Turn lldb_private::Status into a value type. (#106163)

This patch removes all of the Set.* methods from Status.

This cleanup is part of a series of patches that make it harder use the
ant

[lldb] Turn lldb_private::Status into a value type. (#106163)

This patch removes all of the Set.* methods from Status.

This cleanup is part of a series of patches that make it harder use the
anti-pattern of keeping a long-lives Status object around and updating
it while dropping any errors it contains on the floor.

This patch is largely NFC, the more interesting next steps this enables
is to:
1. remove Status.Clear()
2. assert that Status::operator=() never overwrites an error
3. remove Status::operator=()

Note that step (2) will bring 90% of the benefits for users, and step
(3) will dramatically clean up the error handling code in various
places. In the end my goal is to convert all APIs that are of the form

` ResultTy DoFoo(Status& error)
`
to

` llvm::Expected<ResultTy> DoFoo()
`
How to read this patch?

The interesting changes are in Status.h and Status.cpp, all other
changes are mostly

` perl -pi -e 's/\.SetErrorString/ = Status::FromErrorString/g' $(git
grep -l SetErrorString lldb/source)
`
plus the occasional manual cleanup.

show more ...

[lldb] Add Populate Methods for ELFLinuxPrPsInfo and ELFLinuxPrStatus (#104109)

To create elf core files there are multiple notes in the core file that
contain these structs as the note. These popu

[lldb] Add Populate Methods for ELFLinuxPrPsInfo and ELFLinuxPrStatus (#104109)

To create elf core files there are multiple notes in the core file that
contain these structs as the note. These populate methods take a Process
and produce fully specified structures that can be used to fill these
note sections. The pr also adds tests to ensure these structs are
correctly populated.

show more ...

[lldb][RISCV] Add RegisterContextPOSIXCore for RISC-V 64 (#93297)

The PR adds the support of CoreDump debugging for RISC-V 64. It
implements new `RegisterContextCorePOSIX_riscv64` class.

Also, t

[lldb][RISCV] Add RegisterContextPOSIXCore for RISC-V 64 (#93297)

The PR adds the support of CoreDump debugging for RISC-V 64. It
implements new `RegisterContextCorePOSIX_riscv64` class.

Also, the contribution fixes `GetRegisterCount()` ->
`GetRegisterSetCount()` misprint in
`RegisterContextPOSIX_riscv64::GetRegisterSetCount()` method, which
leaded to `set && "Register set should be valid."` assertion during
`register info aX` command call.

The patch was tested (on coredumps generated for simple Integer/FP
calculation code) for _cross x86_64 -> RISCV_ and _native RISCV_ LLDB
builds. There were performed basic LLDB functionality tests, such as:

- CoreDump file load
- Backtrace / frames
- GP/FP registers read/info/list
- Basic switch between threads
- Disassembler code
- Memory regions read / display

show more ...

[lldb][x86_64] Support fs_base/gs_base register in Linux

Summary:
[lldb][x86_64] This patch adds fs_base/gs_base support for Linux x86_64.

Originally, I plan to split the diff into two parts, one t

[lldb][x86_64] Support fs_base/gs_base register in Linux

Summary:
[lldb][x86_64] This patch adds fs_base/gs_base support for Linux x86_64.

Originally, I plan to split the diff into two parts, one to refactoring lldb_xxx_x86_64 => x86_64::lldb_xxx across code base and the other one for adding fs_base/gs_base, but it turns out to be a non-trivial effort to split and very error prone so I decided to keep a single diff to get feedback.

GDB supports fs_base/gs_base registers while LLDB does not. Since both linux coredump note section and ptrace
supports them it is a missing feature.

For context, this is a required feature to support getting pthread pointer on linux from both live and dump debugging.
See thread below for details:
https://discourse.llvm.org/t/how-to-get-pthread-pointer-from-lldb/70542/2?u=jeffreytan81

Implementation wise, we have initially tried `#ifdef` approach to reuse the code but it is introducing very tricky bugs and proves
hard to maintain. Instead the diff completely separates the registers between x86_64 and x86_64_with_base so that non-linux related
implementations can use x86_64 registers while linux uses x86_64_with_base.
Here are the list of changes done in the patch:
* Registers in lldb-x86-register-enums.h are separated into two: x86_64 and x86_64_with_base
* fs_base/gs_base are added into x86_64_with_base
* All linux files are change to use x86_64::lldb_xxx => x86_64_with_base::lldb_xxx
* Support linux elf-core:
* A new RegisterContextLinuxCore_x86_64 class is added for ThreadElfCore
* RegisterContextLinuxCore_x86_64 overrides and uses its own register set supports fs_base/gs_base
* RegisterInfos_x86_64_with_base/RegisterInfos_x86_64_with_base_shared ared added to provide g_contained_XXX/g_invalidate_XXX and RegInfo related code sharing.
* `RegisterContextPOSIX_x86 ::m_gpr_x86_64` seems to be unused so I removed it.
* `NativeRegisterContextDBReg_x86::GetDR()` is overridden in `NativeRegisterContextLinux_x86_64` to make watchpoint work.

Reviewers:clayborg,labath,jingham,jdoerfert,JDevlieghere,kusmour,GeorgeHuyubo

Subscribers:

Tasks:

Tags:

Differential Revision: https://reviews.llvm.org/D155256

show more ...

[LLDB] Show sub type of signals when debugging a core file

Previously we only looked at the si_signo field, so you got:
```
(lldb) bt
* thread #1, name = 'a.out.mte', stop reason = signal SIGSEGV

[LLDB] Show sub type of signals when debugging a core file

Previously we only looked at the si_signo field, so you got:
```
(lldb) bt
* thread #1, name = 'a.out.mte', stop reason = signal SIGSEGV
* frame #0: 0x00000000004007f4
```
This patch adds si_code so we can show:
```
(lldb) bt
* thread #1, name = 'a.out.mte', stop reason = signal SIGSEGV: sync tag check fault
* frame #0: 0x00000000004007f4
```

The order of errno and code was incorrect in ElfLinuxSigInfo::Parse.
It was the order that a "swapped" siginfo arch would use, which for Linux,
is only MIPS. We removed MIPS Linux support some time ago.

See:
https://github.com/torvalds/linux/blob/fe15c26ee26efa11741a7b632e9f23b01aca4cc6/include/uapi/asm-generic/siginfo.h#L121

A test is added using memory tagging faults. Which were the original
motivation for the changes.

Reviewed By: JDevlieghere

Differential Revision: https://reviews.llvm.org/D146045

show more ...

[lldb] Rename Logging.h to LLDBLog.h and clean up includes

Most of our code was including Log.h even though that is not where the
"lldb" log channel is defined (Log.h defines the generic logging
inf

[lldb] Rename Logging.h to LLDBLog.h and clean up includes

Most of our code was including Log.h even though that is not where the
"lldb" log channel is defined (Log.h defines the generic logging
infrastructure). This worked because Log.h included Logging.h, even
though it should.

After the recent refactor, it became impossible the two files include
each other in this direction (the opposite inclusion is needed), so this
patch removes the workaround that was put in place and cleans up all
files to include the right thing. It also renames the file to LLDBLog to
better reflect its purpose.

show more ...

[lldb] Convert "LLDB" log channel to the new API

[lldb] [Process/elf-core] Fix reading NetBSD/i386 core dumps

Add support for extracting basic data from NetBSD/i386 core dumps.
FPU registers are not supported at the moment.

Differential Revision:

[lldb] [Process/elf-core] Fix reading NetBSD/i386 core dumps

Add support for extracting basic data from NetBSD/i386 core dumps.
FPU registers are not supported at the moment.

Differential Revision: https://reviews.llvm.org/D101091

show more ...

[LLDB] Add support for Arm64/Linux dynamic register sets

This is patch adds support for adding dynamic register sets for
AArch64 dynamic features in LLDB. AArch64 has optional features like
SVE, Poi

[LLDB] Add support for Arm64/Linux dynamic register sets

This is patch adds support for adding dynamic register sets for
AArch64 dynamic features in LLDB. AArch64 has optional features like
SVE, Pointer Authentication and MTE which means LLDB needs to decide
at run time which registers it needs to pull in for the current
executable based on underlying support for a certain feature.

This patch makes necessary adjustments to make way for dynamic
register infos and dynamic register sets.

Reviewed By: labath

Differential Revision: https://reviews.llvm.org/D96458

show more ...

[lldb] Remove linux/mips debugging support

As discussed on lldb-dev
<https://lists.llvm.org/pipermail/lldb-dev/2021-March/016777.html> the
mips code is unmaintained and untested. It also carries a l

[lldb] Remove linux/mips debugging support

As discussed on lldb-dev
<https://lists.llvm.org/pipermail/lldb-dev/2021-March/016777.html> the
mips code is unmaintained and untested. It also carries a lot of
technical debt which is not limited to mips-specific code.

Generic mips support remains (and is going to be used by the upcoming
freebsd code). Resurrecting mips support should be a matter of re-adding
the relevant register context files (while avoiding reintroducing the
debt).

show more ...

Move NativeRegisterContextLinux/RegisterContextPOSIX*_arm to RegisterInfoAndSetInterface

This patch removes register set definitions and other redundant code from
NativeRegisterContextLinux/Register

Move NativeRegisterContextLinux/RegisterContextPOSIX*_arm to RegisterInfoAndSetInterface

This patch removes register set definitions and other redundant code from
NativeRegisterContextLinux/RegisterContextPOSIX*_arm. Register sets are now
moved under RegisterInfosPOSIX_arm which now uses RegisterInfoAndSetInterface.
This is similar to what we earlier did for AArch64.

Reviewed By: labath

Differential Revision: https://reviews.llvm.org/D86962

show more ...

Combine multiple defs of arm64 register sets

Summary:
This patch aims to combine similar arm64 register set definitions defined in NativeRegisterContextLinux_arm64 and RegisterContextPOSIX_arm64.
I

Combine multiple defs of arm64 register sets

Summary:
This patch aims to combine similar arm64 register set definitions defined in NativeRegisterContextLinux_arm64 and RegisterContextPOSIX_arm64.
I have implemented a register set interface out of RegisterInfoInterface class and moved arm64 register sets into RegisterInfosPOSIX_arm64 which is similar to Utility/RegisterContextLinux_* implemented by various other targets. This will help in managing register sets of new ARM64 architecture features in one place.

Built and tested on x86_64-linux-gnu, aarch64-linux-gnu and arm-linux-gnueabihf targets.

Reviewers: labath

Reviewed By: labath

Subscribers: mhorne, emaste, kristof.beyls, atanasyan, danielkiss, lldb-commits

Differential Revision: https://reviews.llvm.org/D80105

show more ...

[lldb] Return Unwinder& from Thread::GetUnwinder

The function always returns a valid object. Let the return type reflect
that, and remove some null checks.

[lldb] Remove DataExtractor::GetPointer

This function is equivalent to GetAddress, but getAddress is also
present on the llvm version of the data extractor.

[lldb][NFC] Fix all formatting errors in .cpp file headers

Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp ----------------------------------------

[lldb][NFC] Fix all formatting errors in .cpp file headers

Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp -------------------------------------------------===//
```
However in LLDB most of our source files have arbitrary changes to this format and
these changes are spreading through LLDB as folks usually just use the existing
source files as templates for their new files (most notably the unnecessary
editor language indicator `-*- C++ -*-` is spreading and in every review
someone is pointing out that this is wrong, resulting in people pointing out that this
is done in the same way in other files).

This patch removes most of these inconsistencies including the editor language indicators,
all the different missing/additional '-' characters, files that center the file name, missing
trailing `===//` (mostly caused by clang-format breaking the line).

Reviewers: aprantl, espindola, jfb, shafik, JDevlieghere

Reviewed By: JDevlieghere

Subscribers: dexonsmith, wuzish, emaste, sdardis, nemanjai, kbarton, MaskRay, atanasyan, arphaman, jfb, abidh, jsji, JDevlieghere, usaxena95, lldb-commits

Tags: #lldb

Differential Revision: https://reviews.llvm.org/D73258

show more ...

[Logging] Replace Log::Printf with LLDB_LOG macro (NFC)

This patch replaces explicit calls to log::Printf with the new LLDB_LOGF
macro. The macro is similar to LLDB_LOG but supports printf-style for

[Logging] Replace Log::Printf with LLDB_LOG macro (NFC)

This patch replaces explicit calls to log::Printf with the new LLDB_LOGF
macro. The macro is similar to LLDB_LOG but supports printf-style format
strings, instead of formatv-style format strings.

So instead of writing:

if (log)
log->Printf("%s\n", str);

You'd write:

LLDB_LOG(log, "%s\n", str);

This change was done mechanically with the command below. I replaced the
spurious if-checks with vim, since I know how to do multi-line
replacements with it.

find . -type f -name '*.cpp' -exec \
sed -i '' -E 's/log->Printf\(/LLDB_LOGF\(log, /g' "{}" +

Differential revision: https://reviews.llvm.org/D65128

llvm-svn: 366936

show more ...

[NFC] Remove ASCII lines from comments

A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.

Its use is not really consistent across the code base

[NFC] Remove ASCII lines from comments

A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.

Its use is not really consistent across the code base, sometimes the
lines are longer, sometimes they are shorter and sometimes they are
omitted. Furthermore, it looks kind of weird with the 80 column limit,
where the comment actually extends past the line, but not by much.
Furthermore, when /// is used for Doxygen comments, it looks
particularly odd. And when // is used, it incorrectly gives the
impression that it's actually a Doxygen comment.

I assume these lines were added to improve distinguishing between
comments and code. However, given that todays editors and IDEs do a
great job at highlighting comments, I think it's worth to drop this for
the sake of consistency. The alternative is fixing all the
inconsistencies, which would create a lot more churn.

Differential revision: https://reviews.llvm.org/D60508

llvm-svn: 358135

show more ...

[lldb] [Process/elf-core] Support aarch64 NetBSD core dumps

Include support for NetBSD core dumps from evbarm/aarch64 system,
and matching test cases for them.

Based on earlier work by Kamil Rytaro

[lldb] [Process/elf-core] Support aarch64 NetBSD core dumps

Include support for NetBSD core dumps from evbarm/aarch64 system,
and matching test cases for them.

Based on earlier work by Kamil Rytarowski.

Differential Revision: https://reviews.llvm.org/D60034

llvm-svn: 357399

show more ...

Fix core files for 32 bit architectures that are supported in ProcessELFCore.cpp

Core files need to know the size of the PRSTATUS header so that we can grab the register values that follow it. The c

Fix core files for 32 bit architectures that are supported in ProcessELFCore.cpp

Core files need to know the size of the PRSTATUS header so that we can grab the register values that follow it. The code that figure out this size was using a hard coded list of architecture cores instead of relying on 32 or 64 bit for most cores.

The fix here fixes core files for 32 bit ARM. Prior to this the PRSTATUS header size was being returned as zero and the register values were being taken from the first bytes of the PRSTATUS struct (signo, etc).

Differential Revision: https://reviews.llvm.org/D58985

llvm-svn: 355526

show more ...

Use std::make_shared in LLDB (NFC)

Unlike std::make_unique, which is only available since C++14,
std::make_shared is available since C++11. Not only is std::make_shared
a lot more readable compared

Use std::make_shared in LLDB (NFC)

Unlike std::make_unique, which is only available since C++14,
std::make_shared is available since C++11. Not only is std::make_shared
a lot more readable compared to ::reset(new), it also performs a single
heap allocation for the object and control block.

Differential revision: https://reviews.llvm.org/D57990

llvm-svn: 353764

show more ...

Update the file headers across all of the LLVM projects in the monorepo
to reflect the new license.

We understand that people may be surprised that we're moving the header
entirely to discuss the ne

Update the file headers across all of the LLVM projects in the monorepo
to reflect the new license.

We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.

Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.

llvm-svn: 351636

show more ...

[windows] LLDB shows the wrong values when register read is executed at a frame other than zero

Summary:
This is a clean version of the change suggested here: https://bugs.llvm.org/show_bug.cgi?id=3

[windows] LLDB shows the wrong values when register read is executed at a frame other than zero

Summary:
This is a clean version of the change suggested here: https://bugs.llvm.org/show_bug.cgi?id=37495

The main change is to follow the same pattern as non-windows targets and use an unwinder object to retrieve the register context. I also changed a couple of the comments to actually log, so that issues with unsupported scenarios can be tracked down more easily. Lastly, ClearStackFrames is implemented in the base class, so individual thread implementations don't have to override it.

Reviewers: asmith, zturner, aleksandr.urakov

Reviewed By: aleksandr.urakov

Subscribers: emaste, stella.stamenova, tatyana-krasnukha, llvm-commits

Differential Revision: https://reviews.llvm.org/D49111

llvm-svn: 336732

show more ...