drivers: remove redundant newline from logs

Fix places where two newline characters may be logged.

Cc: stable@dpdk.org

Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Chengwen

drivers: remove redundant newline from logs

Fix places where two newline characters may be logged.

Cc: stable@dpdk.org

Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Chengwen Feng <fengchengwen@huawei.com>

show more ...

net/thunderx: fix DMAC control register update

By default dmac control register is set to reject packets
on mac address match, leading all unicast packets to drop.
Update DMAC control register to al

net/thunderx: fix DMAC control register update

By default dmac control register is set to reject packets
on mac address match, leading all unicast packets to drop.
Update DMAC control register to allow packets on MAC address
match rather than dropping.

Fixes: e438796617dc ("net/thunderx: add PMD skeleton")
Cc: stable@dpdk.org

Signed-off-by: Hanumanth Pothula <hpothula@marvell.com>

show more ...

drivers/net: return number of supported packet types

Missing "RTE_PTYPE_UNKNOWN" ptype causes buffer overflow.
Enhance code such that the dev_supported_ptypes_get()
function pointer now returns the

drivers/net: return number of supported packet types

Missing "RTE_PTYPE_UNKNOWN" ptype causes buffer overflow.
Enhance code such that the dev_supported_ptypes_get()
function pointer now returns the number of elements to
eliminate the need for "RTE_PTYPE_UNKNOWN" as the last item.

Same applied to 'buffer_split_supported_hdr_ptypes_get()' dev_ops too.

Signed-off-by: Sivaramakrishnan Venkat <venkatx.sivaramakrishnan@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@amd.com>

show more ...

drivers/net: fix buffer overflow for packet types list

Address Sanitizer detects a buffer overflow caused by an incorrect
ptypes list. Missing "RTE_PTYPE_UNKNOWN" ptype causes buffer overflow.
Fix t

drivers/net: fix buffer overflow for packet types list

Address Sanitizer detects a buffer overflow caused by an incorrect
ptypes list. Missing "RTE_PTYPE_UNKNOWN" ptype causes buffer overflow.
Fix the ptypes list for drivers.

Fixes: 0849ac3b6122 ("net/tap: add packet type management")
Fixes: a7bdc3bd4244 ("net/dpaa: support packet type parsing")
Fixes: 4ccc8d770d3b ("net/mvneta: add PMD skeleton")
Fixes: f3f0d77db6b0 ("net/mrvl: support packet type parsing")
Fixes: 71e8bb65046e ("net/nfp: update supported list of packet types")
Fixes: 659b494d3d88 ("net/pfe: add packet types and basic statistics")
Fixes: 398a1be14168 ("net/thunderx: remove generic passX references")
Cc: stable@dpdk.org

Signed-off-by: Sivaramakrishnan Venkat <venkatx.sivaramakrishnan@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@amd.com>

show more ...

drivers: use macro for PCI address format

Some places were not using the macro PCI_PRI_FMT
as print format of a PCI address.

Note: RTE prefix is missing in the name of some PCI macros.

Signed-off-

drivers: use macro for PCI address format

Some places were not using the macro PCI_PRI_FMT
as print format of a PCI address.

Note: RTE prefix is missing in the name of some PCI macros.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John Daley <johndale@cisco.com>
Acked-by: Huisong Li <lihuisong@huawei.com>

show more ...

ethdev: remove Rx header split port offload

As announced in the deprecation note, remove the Rx offload flag
'RTE_ETH_RX_OFFLOAD_HEADER_SPLIT' and 'split_hdr_size' field from
the structure 'rte_eth_

ethdev: remove Rx header split port offload

As announced in the deprecation note, remove the Rx offload flag
'RTE_ETH_RX_OFFLOAD_HEADER_SPLIT' and 'split_hdr_size' field from
the structure 'rte_eth_rxmode'. Meanwhile, the place where the examples
and apps initialize the 'split_hdr_size' field, and where the drivers
check if the 'split_hdr_size' value is 0 are also removed.

User can still use `RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT` for per-queue packet
split offload, which is configured by 'rte_eth_rxseg_split'.

Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>

show more ...

ethdev: remove deprecated Flow Director configuration

Remove deprecated fdir_conf from device configuration.
Assume that mode is equal to RTE_FDIR_MODE_NONE.

Add internal Flow Director configuratio

ethdev: remove deprecated Flow Director configuration

Remove deprecated fdir_conf from device configuration.
Assume that mode is equal to RTE_FDIR_MODE_NONE.

Add internal Flow Director configuration copy in ixgbe and txgbe device
private data since flow API supports requires it. Initialize mode to
the first flow rule mode on the rule validation or creation.

Since Flow Director configuration data types are still used by some
drivers internally, move it from public API to ethdev driver internal
API.

Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Dongdong Liu <liudongdong3@huawei.com>

show more ...

dev: hide driver object

Make rte_driver opaque for non internal users.
This will make extending this object possible without breaking the ABI.

Introduce a new driver header and move rte_driver defi

dev: hide driver object

Make rte_driver opaque for non internal users.
This will make extending this object possible without breaking the ABI.

Introduce a new driver header and move rte_driver definition.
Update drivers and library to use the internal header.

Some applications may have been dereferencing rte_driver objects, mark
this object's accessors as stable.

Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>

show more ...

bus/pci: make driver-only headers private

The pci bus interface is for drivers only.
Mark as internal and move the header in the driver headers list.

While at it, cleanup the code:
- fix indentatio

bus/pci: make driver-only headers private

The pci bus interface is for drivers only.
Mark as internal and move the header in the driver headers list.

While at it, cleanup the code:
- fix indentation,
- remove unneeded reference to bus specific singleton object,
- remove unneeded list head structure type,
- reorder the definitions and macro manipulating the bus singleton object,
- remove inclusion of rte_bus.h and fix the code that relied on implicit
inclusion,

Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>

show more ...

net/thunderx: populate max and min MTU values

Populate maximum and minimum MTU values while retrieving
device information.

Signed-off-by: Hanumanth Pothula <hpothula@marvell.com>

net/thunderx: support setting link attributes

Adding support to configure link attributes like speed,
duplex, negotiation.

Signed-off-by: Harman Kalra <hkalra@marvell.com>

net/thunderx: reset Rx DMAC control register

During initialization, reset RX DMAC control register by
sending mbox message NIC_MBOX_MSG_RESET_XCAST to PF.

Signed-off-by: Hanumanth Pothula <hpothula

net/thunderx: reset Rx DMAC control register

During initialization, reset RX DMAC control register by
sending mbox message NIC_MBOX_MSG_RESET_XCAST to PF.

Signed-off-by: Hanumanth Pothula <hpothula@marvell.com>

show more ...

net/thunderx: support polling of link state change

Moving the logic of link polling to VF from PF. Now VF
is supposed to poll for the link status, rather PF alerting
VF about any link change.

Signe

net/thunderx: support polling of link state change

Moving the logic of link polling to VF from PF. Now VF
is supposed to poll for the link status, rather PF alerting
VF about any link change.

Signed-off-by: Hanumanth Pothula <hpothula@marvell.com>

show more ...

drivers: remove direct access to interrupt handle

Removing direct access to interrupt handle structure fields,
rather use respective get set APIs for the same.
Making changes to all the drivers acce

drivers: remove direct access to interrupt handle

Removing direct access to interrupt handle structure fields,
rather use respective get set APIs for the same.
Making changes to all the drivers access the interrupt handle fields.

Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>

show more ...

ethdev: add namespace

Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to

ethdev: add namespace

Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.

All internal components switched to using new names.

Syntax fixed on lines that this patch touches.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>

show more ...

ethdev: move MTU set check to library

Move requested MTU value check to the API to prevent the duplicated
code.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <a

ethdev: move MTU set check to library

Move requested MTU value check to the API to prevent the duplicated
code.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

show more ...

ethdev: move jumbo frame offload check to library

Setting MTU bigger than RTE_ETHER_MTU requires the jumbo frame support,
and application should enable the jumbo frame offload support for it.

When

ethdev: move jumbo frame offload check to library

Setting MTU bigger than RTE_ETHER_MTU requires the jumbo frame support,
and application should enable the jumbo frame offload support for it.

When jumbo frame offload is not enabled by application, but MTU bigger
than RTE_ETHER_MTU is requested there are two options, either fail or
enable jumbo frame offload implicitly.

Enabling jumbo frame offload implicitly is selected by many drivers
since setting a big MTU value already implies it, and this increases
usability.

This patch moves this logic from drivers to the library, both to reduce
the duplicated code in the drivers and to make behaviour more visible.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>

show more ...

ethdev: fix max Rx packet length

There is a confusion on setting max Rx packet length, this patch aims to
clarify it.

'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_p

ethdev: fix max Rx packet length

There is a confusion on setting max Rx packet length, this patch aims to
clarify it.

'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_pkt_len' field of the config struct 'struct
rte_eth_conf'.

Also 'rte_eth_dev_set_mtu()' API can be used to set the MTU, and result
stored into '(struct rte_eth_dev)->data->mtu'.

These two APIs are related but they work in a disconnected way, they
store the set values in different variables which makes hard to figure
out which one to use, also having two different method for a related
functionality is confusing for the users.

Other issues causing confusion is:
* maximum transmission unit (MTU) is payload of the Ethernet frame. And
'max_rx_pkt_len' is the size of the Ethernet frame. Difference is
Ethernet frame overhead, and this overhead may be different from
device to device based on what device supports, like VLAN and QinQ.
* 'max_rx_pkt_len' is only valid when application requested jumbo frame,
which adds additional confusion and some APIs and PMDs already
discards this documented behavior.
* For the jumbo frame enabled case, 'max_rx_pkt_len' is an mandatory
field, this adds configuration complexity for application.

As solution, both APIs gets MTU as parameter, and both saves the result
in same variable '(struct rte_eth_dev)->data->mtu'. For this
'max_rx_pkt_len' updated as 'mtu', and it is always valid independent
from jumbo frame.

For 'rte_eth_dev_configure()', 'dev->data->dev_conf.rxmode.mtu' is user
request and it should be used only within configure function and result
should be stored to '(struct rte_eth_dev)->data->mtu'. After that point
both application and PMD uses MTU from this variable.

When application doesn't provide an MTU during 'rte_eth_dev_configure()'
default 'RTE_ETHER_MTU' value is used.

Additional clarification done on scattered Rx configuration, in
relation to MTU and Rx buffer size.
MTU is used to configure the device for physical Rx/Tx size limitation,
Rx buffer is where to store Rx packets, many PMDs use mbuf data buffer
size as Rx buffer size.
PMDs compare MTU against Rx buffer size to decide enabling scattered Rx
or not. If scattered Rx is not supported by device, MTU bigger than Rx
buffer size should fail.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>

show more ...

ethdev: change input parameters for Rx queue count

Currently majority of fast-path ethdev ops take pointers to internal
queue data structures as an input parameter.
While eth_rx_queue_count() takes

ethdev: change input parameters for Rx queue count

Currently majority of fast-path ethdev ops take pointers to internal
queue data structures as an input parameter.
While eth_rx_queue_count() takes a pointer to rte_eth_dev and queue
index.
For future work to hide rte_eth_devices[] and friends it would be
plausible to unify parameters list of all fast-path ethdev ops.
This patch changes eth_rx_queue_count() to accept pointer to internal
queue data as input parameter.
While this change is transparent to user, it still counts as an ABI change,
as eth_rx_queue_count_t is used by ethdev public inline function
rte_eth_rx_queue_count().

Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Feifei Wang <feifei.wang2@arm.com>

show more ...

mempool: add namespace to flags

Fix the mempool flags namespace by adding an RTE_ prefix to the name.
The old flags remain usable, to be deprecated in the future.

Flag MEMPOOL_F_NON_IO added in the

mempool: add namespace to flags

Fix the mempool flags namespace by adding an RTE_ prefix to the name.
The old flags remain usable, to be deprecated in the future.

Flag MEMPOOL_F_NON_IO added in the release is just renamed to have RTE_
prefix.

Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>

show more ...

ethdev: change queue release callback

Currently, most ethdev callback API use queue ID as parameter, but Rx
and Tx queue release callback use queue object which is used by Rx and
Tx burst data plane

ethdev: change queue release callback

Currently, most ethdev callback API use queue ID as parameter, but Rx
and Tx queue release callback use queue object which is used by Rx and
Tx burst data plane callback.

To align with other eth device queue configuration callbacks:
- queue release callbacks are changed to use queue ID
- all drivers are adapted

Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

net: add macro for MAC address print

Added macro to print six bytes of MAC address.
The MAC addresses will be printed in upper case
hexadecimal format.
In case there is a specific check for lower ca

net: add macro for MAC address print

Added macro to print six bytes of MAC address.
The MAC addresses will be printed in upper case
hexadecimal format.
In case there is a specific check for lower case
MAC address, the user may need to make a change in
such test case after this patch.

Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

log: register with standardized names

Let's try to enforce the convention where most drivers use a pmd. logtype
with their class reflected in it, and libraries use a lib. logtype.

Introduce two new

log: register with standardized names

Let's try to enforce the convention where most drivers use a pmd. logtype
with their class reflected in it, and libraries use a lib. logtype.

Introduce two new macros:
- RTE_LOG_REGISTER_DEFAULT can be used when a single logtype is
used in a component. It is associated to the default name provided
by the build system,
- RTE_LOG_REGISTER_SUFFIX can be used when multiple logtypes are used,
and then the passed name is appended to the default name,

RTE_LOG_REGISTER is left untouched for existing external users
and for components that do not comply with the convention.

There is a new Meson variable log_prefix to adapt the default name
for baseband (pmd.bb.), bus (no pmd.) and mempool (no pmd.) classes.

Note: achieved with below commands + reverted change on net/bonding +
edits on crypto/virtio, compress/mlx5, regex/mlx5

$ git grep -l RTE_LOG_REGISTER drivers/ |
while read file; do
pattern=${file##drivers/};
class=${pattern%%/*};
pattern=${pattern#$class/};
drv=${pattern%%/*};
case "$class" in
baseband) pattern=pmd.bb.$drv;;
bus) pattern=bus.$drv;;
mempool) pattern=mempool.$drv;;
*) pattern=pmd.$class.$drv;;
esac
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done

$ git grep -l RTE_LOG_REGISTER lib/ |
while read file; do
pattern=${file##lib/};
pattern=lib.${pattern%%/*};
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done

Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>

show more ...

ethdev: make driver-only headers private

The rte_ethdev_driver.h, rte_ethdev_vdev.h and rte_ethdev_pci.h files are
for drivers only and should be a private to DPDK and not installed.

Signed-off-by:

ethdev: make driver-only headers private

The rte_ethdev_driver.h, rte_ethdev_vdev.h and rte_ethdev_pci.h files are
for drivers only and should be a private to DPDK and not installed.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Steven Webster <steven.webster@windriver.com>

show more ...

net/thunderx: fix jumbo frame flag condition for MTU set

The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition,
but the Ether overhead is larger than 18 when it supports dual VLAN tags.

net/thunderx: fix jumbo frame flag condition for MTU set

The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition,
but the Ether overhead is larger than 18 when it supports dual VLAN tags.
That will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.

This fix will change the boundary condition with 'RTE_ETHER_MTU' and
overhead, that perhaps impacts the cases of the jumbo frame related.

Fixes: 65d9804edc05 ("net/thunderx: support MTU configuration")
Cc: stable@dpdk.org

Signed-off-by: Steve Yang <stevex.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...