1 /* $NetBSD: ninjaata32reg.h,v 1.4 2011/02/21 02:32:00 itohy Exp $ */ 2 3 /* 4 * Copyright (c) 2006 ITOH Yasufumi. 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' 17 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 18 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 19 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS 20 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 21 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 22 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 23 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 24 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 25 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 26 * THE POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29 #ifndef _NJATA32REG_H_ 30 #define _NJATA32REG_H_ 31 32 /* 33 * Workbit NinjaATA (32bit versions), IDE Controller with Busmastering PIO: 34 * NinjaATA-32Bi PCMCIA/CardBus dual mode device ("DuoATA") 35 * (CardBus mode only) 36 * NPATA-32 CardBus device 37 */ 38 39 /* 40 * CAVEAT 41 * The names and the functions of the registers are probably incorrect 42 * since no programming information is available in the public. 43 */ 44 45 #define NJATA32_REGSIZE 32 /* size of register set */ 46 #define NJATA32_MEMOFFSET_REG 0x860 /* offset of memory mapped register */ 47 48 #define NJATA32_REG_IRQ_STAT 0x00 /* len=1 RO */ 49 #define NJATA32_REG_IRQ_SELECT 0x01 /* len=1 WO */ 50 # define NJATA32_IRQ_XFER 0x01 51 # define NJATA32_IRQ_DEV 0x04 52 53 #define NJATA32_REG_IOBM 0x02 /* len=1 WO */ 54 # define NJATA32_IOBM_01 0x01 55 # define NJATA32_IOBM_02 0x02 56 # define NJATA32_IOBM_MMENBL 0x08 57 # define NJATA32_IOBM_BURST 0x10 58 # define NJATA32_IOBM_NO_BMSTART0 0x20 59 # define NJATA32_IOBM_80 0x80 60 61 # define NJATA32_IOBM_DEFAULT (NJATA32_IOBM_01 | NJATA32_IOBM_02 | \ 62 NJATA32_IOBM_BURST | NJATA32_IOBM_NO_BMSTART0 | NJATA32_IOBM_80) 63 64 #define NJATA32_REG_AS 0x04 /* len=1 WO */ 65 # define NJATA32_AS_START 0x01 /* 0: PIO BM, 1: DMA BM */ 66 # define NJATA32_AS_WAIT0 0x00 67 # define NJATA32_AS_WAIT1 0x04 68 # define NJATA32_AS_WAIT2 0x08 69 # define NJATA32_AS_WAIT3 0x0c 70 # define NJATA32_AS_BUS_RESET 0x80 71 72 #define NJATA32_REG_DMAADDR 0x08 /* len=4 R/W */ 73 #define NJATA32_REG_DMALENGTH 0x0c /* len=4 R/W */ 74 75 /* 76 * WDC registers 77 */ 78 #define NJATA32_OFFSET_WDCREGS 0x10 79 80 #define NJATA32_REG_WD_DATA 0x10 /* len=1/2/4 R/W */ 81 #define NJATA32_REG_WD_ERROR 0x11 /* len=1 RO */ 82 #define NJATA32_REG_WD_FEATURES 0x11 /* len=1 WO */ 83 #define NJATA32_REG_WD_SECCNT 0x12 /* len=1 R/W */ 84 #define NJATA32_REG_WD_IREASON 0x12 /* len=1 R/W (ATAPI) */ 85 #define NJATA32_REG_WD_SECTOR 0x13 /* len=1 R/W */ 86 #define NJATA32_REG_WD_LBA_LO 0x13 /* len=1 R/W */ 87 #define NJATA32_REG_WD_CYL_LO 0x14 /* len=1 R/W */ 88 #define NJATA32_REG_WD_LBA_MI 0x14 /* len=1 R/W */ 89 #define NJATA32_REG_WD_CYL_HI 0x15 /* len=1 R/W */ 90 #define NJATA32_REG_WD_LBA_HI 0x15 /* len=1 R/W */ 91 #define NJATA32_REG_WD_SDH 0x16 /* len=1 R/W */ 92 #define NJATA32_REG_WD_COMMAND 0x17 /* len=1 WO */ 93 #define NJATA32_REG_WD_STATUS 0x17 /* len=1 RO */ 94 95 #if 0 /* these registers seem to show the busmaster status */ 96 /* ? */ 97 #define NJATA32_REG_18 0x18 /* len=4 RO */ 98 /* ? */ 99 #define NJATA32_REG_1c 0x1c /* len=1 RO */ 100 #endif 101 102 #define NJATA32_REG_BM 0x1d /* len=1 R/W */ 103 # define NJATA32_BM_EN 0x01 104 # define NJATA32_BM_RD 0x02 /* 0: write, 1: read */ 105 # define NJATA32_BM_SG 0x04 /* 1: use scatter/gather tbl */ 106 # define NJATA32_BM_GO 0x08 107 # define NJATA32_BM_WAIT0 0x00 108 # define NJATA32_BM_WAIT1 0x10 109 # define NJATA32_BM_WAIT2 0x20 110 # define NJATA32_BM_WAIT3 0x30 111 # define NJATA32_BM_WAIT_MASK 0x30 112 # define NJATA32_BM_WAIT_SHIFT 4 113 # define NJATA32_BM_DONE 0x80 /* ? */ 114 115 #define NJATA32_REG_WD_ALTSTATUS 0x1e /* len=1 R */ 116 117 #define NJATA32_REG_TIMING 0x1f /* len=1 W */ 118 /* timing values for PIO transfer */ 119 # define NJATA32_TIMING_PIO0 0xd6 120 # define NJATA32_TIMING_PIO1 0x85 121 # define NJATA32_TIMING_PIO2 0x44 122 # define NJATA32_TIMING_PIO3 0x33 123 # define NJATA32_TIMING_PIO4 0x13 124 # define NJATA32_TIMING_PIO4_ 0x14 /* for timing tweak */ 125 # define NJATA32_TIMING_PIO4__ 0x24 /* for timing tweak */ 126 /* timing values for multiword DMA transfer */ 127 # define NJATA32_TIMING_DMA0 0x88 128 # define NJATA32_TIMING_DMA1 0x23 129 # define NJATA32_TIMING_DMA2 0x13 130 /* timing values for obsolete singleword DMA transfer */ 131 # define NJATA32_TIMING_SMDMA0 0xff 132 # define NJATA32_TIMING_SMDMA1 0x88 133 # define NJATA32_TIMING_SMDMA2 0x44 134 135 /* 136 * DMA data structure 137 */ 138 139 /* scatter/gather transfer table entry (8 bytes) */ 140 struct njata32_sgtable { 141 uint32_t sg_addr; /* transfer address (little endian) */ 142 uint32_t sg_len; /* transfer length (little endian) */ 143 #define NJATA32_SGT_ENDMARK 0x80000000 144 #define NJATA32_SGT_MAXSEGLEN 0x10000 145 }; 146 #define NJATA32_SGT_MAXENTRY 18 147 148 /* 149 * device specific constants 150 */ 151 #define NJATA32_MODE_MAX_DMA 2 152 #define NJATA32_MODE_MAX_PIO 4 153 154 #endif /* _NJATA32REG_H_ */ 155