xref: /netbsd-src/sys/arch/vax/boot/xxboot/start.S (revision 20b4652c7540f6450b494eccce384025b84f85aa)
1/*	$NetBSD: start.S,v 1.7 2020/04/06 01:43:26 snj Exp $ */
2/*
3 * Copyright (c) 1995 Ludd, University of Lule}, Sweden.
4 * All rights reserved.
5 *
6 * This code is derived from software contributed to Ludd by
7 * Bertram Barth.
8 *
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
11 * are met:
12 * 1. Redistributions of source code must retain the above copyright
13 *    notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 *    notice, this list of conditions and the following disclaimer in the
16 *    documentation and/or other materials provided with the distribution.
17 *
18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
19 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
20 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
21 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
22 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
23 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
24 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
25 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
26 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
27 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28 */
29
30 /* All bugs are subject to removal without further notice */
31
32
33#define _LOCORE
34
35#define	__HAVE_OLD_DISKLABEL	/* not automatically added due to _LOCORE */
36#define OMIT_DKTYPENUMS
37#define OMIT_FSTYPENUMS
38#include "sys/disklabel.h"
39
40#include "../include/mtpr.h"
41#include "../include/asm.h"
42
43_C_LABEL(_start):
44_C_LABEL(start):
45	.globl _C_LABEL(start)	# this is the symbolic name for the start
46	.globl _C_LABEL(_start) # of code to be relocated. We can use this
47				# to get the actual/real address (pc-rel)
48				# or to get the relocated address (abs).
49
50.org	0x00			# uVAX booted from TK50 starts here
51	brb	from_0x00	# continue behind dispatch-block
52
53# At offset 0x02 we have a dual used area: VMB.EXE starts execution here,
54# and uVAX-ROM looks for a pointer to a parameter block. We arrange for
55# the parameter block offset to disassemble as a CASEL instructions which
56# falls through to 0x08.
57.org	0x02			# information used by uVAX-ROM
58	.byte	0xcf		# offset in words to identification area
59	.byte	1		# this byte must be 1
60	.word	0		# logical block number (word swapped)
61	.word	0		# of the secondary image
62
63.org	0x08			#
64	brb	from_0x08	# skip ...
65
66.org	0x0C			# 11/750  & 8200 starts here
67	movzbl	$1,_C_LABEL(from)# We booted from "old" rom.
68	brw	cont_750
69
70
71from_0x00:			# uVAX from TK50
72	brw	start_uvax	# all uVAXen continue there
73
74from_0x08:			# Any machine from VMB
75	movzbl	$4,_C_LABEL(from)		# Booted from full VMB
76	/*
77	 * Read in block 1-15.
78	 */
79	movl	52(%r11), %r7	# load iovec/bqo into %r7
80	addl3	(%r7), %r7, %r6	# load qio into %r6
81	pushl	%r11		# base of rpb
82	pushl	$0		# virtual-flag
83	pushl	$33		# read-logical-block
84	pushl	$1		# lbn to start reading
85	pushl	$7680		# number of bytes to read
86	pushab	start_uvax	# buffer-address
87	calls	$6, (%r6)	# call the qio-routine
88	brw	start_uvax
89
90# the complete area reserved for label
91# must be empty (i.e. filled with zeroes).
92# disklabel(8) checks that before installing
93# the bootblocks over existing label.
94
95.org	LABELOFFSET
96	.globl	_C_LABEL(romlabel)
97_C_LABEL(romlabel):
98	.long	0
99
100.org	LABELOFFSET + d_end_
101# Make sure the parameter block is past the disklabel.
102# If not, the next .org would try to move backwards.
103
104/*
105 * Parameter block for uVAX boot.
106 */
107#define VOLINFO		0	/* 1=single-sided  81=double-sided volumes */
108#define SISIZE		16	/* size in blocks of secondary image */
109#define SILOAD		0	/* load offset (usually 0) from the default */
110#define SIOFF		0x200	/* byte offset into secondary image */
111
112.org	0x19e	# do not move, see comment earlier about CASEL
113	.byte	0x18		# must be 0x18
114	.byte	0x00		# must be 0x00 (MBZ)
115	.byte	0x00		# any value
116	.byte	0xFF - (0x18 + 0x00 + 0x00)
117		/* 4th byte holds 1s' complement of sum of previous 3 bytes */
118
119	.byte	0x00		# must be 0x00 (MBZ)
120	.byte	VOLINFO
121	.byte	0x00		# any value
122	.byte	0x00		# any value
123
124	.long	SISIZE		# size in blocks of secondary image
125	.long	SILOAD		# load offset (usually 0)
126	.long	SIOFF		# byte offset into secondary image
127	.long	(SISIZE + SILOAD + SIOFF)	# sum of previous 3
128
129
130	.align	2
131	.globl	_C_LABEL(from)
132_C_LABEL(from):
133	.long	0
134
135/*
136 * After bootblock (LBN0) has been loaded into the first page
137 * of good memory by 11/750's ROM-code (transfer address
138 * of bootblock-code is: base of good memory + 0x0C) registers
139 * are initialized as:
140 *	R0:	type of boot-device
141 *			0:	Massbus device
142 *			1:	RK06/RK07
143 *			2:	RL02
144 *			17:	UDA50
145 *			35:	TK50
146 *			64:	TU58
147 *	R1:	(UBA) address of UNIBUS I/O-page
148 *		(MBA) address of boot device's adapter
149 *	R2:	(UBA) address of the boot device's CSR
150 *		(MBA) controller number of boot device
151 *	R6:	address of driver subroutine in ROM
152 *
153 * cont_750 reads in LBN1-15 for further execution.
154 */
155cont_750:
156	movl	$_C_LABEL(start), %sp	# move stack to avoid clobbering the code
157	pushr	$0x131		# save clobbered registers
158	clrl	%r4		# %r4 == # of blocks transferred
159	movab	_C_LABEL(start),%r5	# %r5 have base address for next transfer
160	pushl	%r5		# ...on stack also (Why?)
1611:	incl	%r4		# increment block count
162	movl	%r4,%r8		# LBN is in %r8 for rom routine
163	addl2	$0x200,%r5	# Increase address for next read
164	cmpl	$16,%r4		# read 15 blocks?
165	beql	2f		# Yep
166	movl	%r5,(%sp)		# move address to stack also
167	jsb	(%r6)		# read 512 bytes
168	blbs	%r0,1b		# jump if read succeeded
169	halt			# otherwise die...
1702:	tstl	(%sp)+		# remove boring arg from stack
171	popr	$0x131		# restore clobbered registers
172	brw	start_all	# Ok, continue...
173
174/* uVAX main entry is at the start of the second disk block.  This is
175 * needed for multi-arch CD booting where multiple architecture need
176 * to shove stuff in boot block 0.
177 */
178	.org	0x200		# uVAX booted from disk starts here
179
180start_uvax:
181	movzbl	$2,_C_LABEL(from)	# Booted from subset-VMB
182	brb	start_all
183
184/*
185 * start_all: stack already at RELOC, we save registers, move ourself
186 * to RELOC and loads boot.
187 */
188start_all:
189	movl	$_C_LABEL(start), %sp	# move stack to a better
190	pushr	$0x1fff			# save all regs, used later.
191
192	subl3	$_C_LABEL(start), $_C_LABEL(edata), %r0
193					# get size of text+data (w/o bss)
194	moval	_C_LABEL(start), %r1	# get actual base-address of code
195	subl3	$_C_LABEL(start), $_C_LABEL(end), %r2
196					# get complete size (incl. bss)
197	movl	$_C_LABEL(start), %r3	# get relocated base-address of code
198	movc5	%r0, (%r1), $0, %r2, (%r3)	# copy code to new location
199
200	movpsl	-(%sp)
201	movl	$relocated, -(%sp)	# return-address on top of stack
202	rei				# can be replaced with new address
203relocated:				# now relocation is done !!!
204	movl	%sp, _C_LABEL(bootregs)
205	calls	$0, _C_LABEL(Xmain)	# call Xmain (gcc workaround)which is
206	halt				# not intended to return ...
207
208/*
209 * hoppabort() is called when jumping to the newly loaded program.
210 */
211ENTRY(hoppabort, 0)
212	movl    4(%ap),%r6
213	movl	_C_LABEL(rpb),%r11
214	mnegl	$1,%ap		# Hack to figure out boot device.
215	movpsl	-(%sp)
216	pushab	2(%r6)
217	mnegl	$1,_C_LABEL(vax_load_failure)
218	rei
219#	calls	$0,(%r6)
220	halt
221
222ENTRY(unit_init, R6|R7|R8|R9|R10|R11)
223	mfpr	$17,%r7			# Wanted bu KDB
224	movl	4(%ap),%r0		# init routine address
225	movl	8(%ap),%r9		# RPB in %r9
226	movl	12(%ap),%r1		# VMB argument list
227	callg	(%r1),(%r0)
228	ret
229
230# A bunch of functions unwanted in boot blocks.
231ENTRY(getchar, 0)
232	halt
233
234#ifndef USE_PRINTF
235ENTRY(putchar, 0)
236	ret
237
238ENTRY(printf, 0)
239	ret
240#endif
241
242ENTRY(panic, 0)
243	halt
244