1 /* $NetBSD: becc_timer.c,v 1.5 2003/07/27 04:52:28 thorpej Exp $ */ 2 3 /* 4 * Copyright (c) 2001, 2002 Wasabi Systems, Inc. 5 * All rights reserved. 6 * 7 * Written by Jason R. Thorpe for Wasabi Systems, Inc. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 3. All advertising materials mentioning features or use of this software 18 * must display the following acknowledgement: 19 * This product includes software developed for the NetBSD Project by 20 * Wasabi Systems, Inc. 21 * 4. The name of Wasabi Systems, Inc. may not be used to endorse 22 * or promote products derived from this software without specific prior 23 * written permission. 24 * 25 * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND 26 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 27 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 28 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC 29 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 30 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 31 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 32 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 33 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 34 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 35 * POSSIBILITY OF SUCH DAMAGE. 36 */ 37 38 /* 39 * Timer/clock support for the ADI Engineering Big Endian Companion Chip. 40 */ 41 42 #include <sys/cdefs.h> 43 __KERNEL_RCSID(0, "$NetBSD: becc_timer.c,v 1.5 2003/07/27 04:52:28 thorpej Exp $"); 44 45 #include <sys/param.h> 46 #include <sys/systm.h> 47 #include <sys/kernel.h> 48 #include <sys/time.h> 49 50 #include <dev/clock_subr.h> 51 52 #include <machine/bus.h> 53 #include <arm/cpufunc.h> 54 55 #include <arm/xscale/beccreg.h> 56 #include <arm/xscale/beccvar.h> 57 58 void (*becc_hardclock_hook)(void); 59 60 /* 61 * Note, since COUNTS_PER_USEC doesn't divide evenly, we round up. 62 */ 63 #define COUNTS_PER_SEC BECC_PERIPH_CLOCK 64 #define COUNTS_PER_USEC ((COUNTS_PER_SEC / 1000000) + 1) 65 66 static void *clock_ih; 67 68 /* 69 * Since the timer interrupts when the counter underflows, we need to 70 * subtract 1 from counts_per_hz when loading the preload register. 71 */ 72 static uint32_t counts_per_hz; 73 74 int clockhandler(void *); 75 76 /* 77 * becc_calibrate_delay: 78 * 79 * Calibrate the delay loop. 80 */ 81 void 82 becc_calibrate_delay(void) 83 { 84 85 /* 86 * Just use hz=100 for now -- we'll adjust it, if necessary, 87 * in cpu_initclocks(). 88 */ 89 counts_per_hz = COUNTS_PER_SEC / 100; 90 91 /* Stop both timers, clear interrupts. */ 92 BECC_CSR_WRITE(BECC_TSCRA, TSCRx_TIF); 93 BECC_CSR_WRITE(BECC_TSCRB, TSCRx_TIF); 94 95 /* Set the timer preload value. */ 96 BECC_CSR_WRITE(BECC_TPRA, counts_per_hz - 1); 97 98 /* Start the timer. */ 99 BECC_CSR_WRITE(BECC_TSCRA, TSCRx_TE | TSCRx_CM); 100 } 101 102 /* 103 * cpu_initclocks: 104 * 105 * Initialize the clock and get them going. 106 */ 107 void 108 cpu_initclocks(void) 109 { 110 u_int oldirqstate; 111 112 #if 0 113 if (hz < 50 || COUNTS_PER_SEC % hz) { 114 printf("Cannot get %d Hz clock; using 100 Hz\n", hz); 115 hz = 100; 116 } 117 #endif 118 tick = 1000000 / hz; /* number of microseconds between interrupts */ 119 tickfix = 1000000 - (hz * tick); 120 if (tickfix) { 121 int ftp; 122 123 ftp = min(ffs(tickfix), ffs(hz)); 124 tickfix >>= (ftp - 1); 125 tickfixinterval = hz >> (ftp - 1); 126 } 127 128 /* 129 * We only have one timer available; stathz and profhz are 130 * always left as 0 (the upper-layer clock code deals with 131 * this situation). 132 */ 133 if (stathz != 0) 134 printf("Cannot get %d Hz statclock\n", stathz); 135 stathz = 0; 136 137 if (profhz != 0) 138 printf("Cannot get %d Hz profclock\n", profhz); 139 profhz = 0; 140 141 /* Report the clock frequency. */ 142 aprint_normal("clock: hz=%d stathz=%d profhz=%d\n", hz, stathz, profhz); 143 144 oldirqstate = disable_interrupts(I32_bit); 145 146 /* Hook up the clock interrupt handler. */ 147 clock_ih = becc_intr_establish(ICU_TIMERA, IPL_CLOCK, 148 clockhandler, NULL); 149 if (clock_ih == NULL) 150 panic("cpu_initclocks: unable to register timer interrupt"); 151 152 /* Set up the new clock parameters. */ 153 154 /* Stop timer, clear interrupt */ 155 BECC_CSR_WRITE(BECC_TSCRA, TSCRx_TIF); 156 157 counts_per_hz = COUNTS_PER_SEC / hz; 158 159 /* Set the timer preload value. */ 160 BECC_CSR_WRITE(BECC_TPRA, counts_per_hz - 1); 161 162 /* ...and start it in motion. */ 163 BECC_CSR_WRITE(BECC_TSCRA, TSCRx_TE | TSCRx_CM); 164 165 /* register soft interrupt handler as well */ 166 becc_intr_establish(ICU_SOFT, IPL_SOFT, becc_softint, NULL); 167 168 restore_interrupts(oldirqstate); 169 } 170 171 /* 172 * setstatclockrate: 173 * 174 * Set the rate of the statistics clock. 175 * 176 * We assume that hz is either stathz or profhz, and that neither 177 * will change after being set by cpu_initclocks(). We could 178 * recalculate the intervals here, but that would be a pain. 179 */ 180 void 181 setstatclockrate(int hz) 182 { 183 184 /* 185 * XXX Use TMR1? 186 */ 187 } 188 189 /* 190 * microtime: 191 * 192 * Fill in the specified timeval struct with the current time 193 * accurate to the microsecond. 194 */ 195 void 196 microtime(struct timeval *tvp) 197 { 198 static struct timeval lasttv; 199 u_int oldirqstate; 200 uint32_t counts; 201 202 oldirqstate = disable_interrupts(I32_bit); 203 204 /* 205 * XXX How do we compensate for the -1 behavior of the preload value? 206 */ 207 counts = counts_per_hz - BECC_CSR_READ(BECC_TCVRA); 208 209 /* Fill in the timeval struct. */ 210 *tvp = time; 211 tvp->tv_usec += (counts / COUNTS_PER_USEC); 212 213 /* Make sure microseconds doesn't overflow. */ 214 while (tvp->tv_usec >= 1000000) { 215 tvp->tv_usec -= 1000000; 216 tvp->tv_sec++; 217 } 218 219 /* Make sure the time has advanced. */ 220 if (tvp->tv_sec == lasttv.tv_sec && 221 tvp->tv_usec <= lasttv.tv_usec) { 222 tvp->tv_usec = lasttv.tv_usec + 1; 223 if (tvp->tv_usec >= 1000000) { 224 tvp->tv_usec -= 1000000; 225 tvp->tv_sec++; 226 } 227 } 228 229 lasttv = *tvp; 230 231 restore_interrupts(oldirqstate); 232 } 233 234 /* 235 * delay: 236 * 237 * Delay for at least N microseconds. 238 */ 239 void 240 delay(u_int n) 241 { 242 uint32_t cur, last, delta, usecs; 243 244 /* 245 * This works by polling the timer and counting the 246 * number of microseconds that go by. 247 */ 248 last = BECC_CSR_READ(BECC_TCVRA); 249 delta = usecs = 0; 250 251 while (n > usecs) { 252 cur = BECC_CSR_READ(BECC_TCVRA); 253 254 /* Check to see if the timer has wrapped around. */ 255 if (last < cur) 256 delta += (last + (counts_per_hz - cur)); 257 else 258 delta += (last - cur); 259 260 last = cur; 261 262 if (delta >= COUNTS_PER_USEC) { 263 usecs += delta / COUNTS_PER_USEC; 264 delta %= COUNTS_PER_USEC; 265 } 266 } 267 } 268 269 todr_chip_handle_t todr_handle; 270 271 /* 272 * todr_attach: 273 * 274 * Set the specified time-of-day register as the system real-time clock. 275 */ 276 void 277 todr_attach(todr_chip_handle_t todr) 278 { 279 280 if (todr_handle) 281 panic("todr_attach: rtc already configured"); 282 todr_handle = todr; 283 } 284 285 /* 286 * inittodr: 287 * 288 * Initialize time from the time-of-day register. 289 */ 290 #define MINYEAR 2003 /* minimum plausible year */ 291 void 292 inittodr(time_t base) 293 { 294 time_t deltat; 295 int badbase; 296 297 if (base < (MINYEAR - 1970) * SECYR) { 298 printf("WARNING: preposterous time in file system"); 299 /* read the system clock anyway */ 300 base = (MINYEAR - 1970) * SECYR; 301 badbase = 1; 302 } else 303 badbase = 0; 304 305 if (todr_handle == NULL || 306 todr_gettime(todr_handle, (struct timeval *)&time) != 0 || 307 time.tv_sec == 0) { 308 /* 309 * Believe the time in the file system for lack of 310 * anything better, resetting the TODR. 311 */ 312 time.tv_sec = base; 313 time.tv_usec = 0; 314 if (todr_handle != NULL && !badbase) { 315 printf("WARNING: preposterous clock chip time\n"); 316 resettodr(); 317 } 318 goto bad; 319 } 320 321 if (!badbase) { 322 /* 323 * See if we tained/lost two or more days; if 324 * so, assume something is amiss. 325 */ 326 deltat = time.tv_sec - base; 327 if (deltat < 0) 328 deltat = -deltat; 329 if (deltat < 2 * SECDAY) 330 return; /* all is well */ 331 printf("WARNING: clock %s %ld days\n", 332 time.tv_sec < base ? "lost" : "gained", 333 (long)deltat / SECDAY); 334 } 335 bad: 336 printf("WARNING: CHECK AND RESET THE DATE!\n"); 337 } 338 339 /* 340 * resettodr: 341 * 342 * Reset the time-of-day register with the current time. 343 */ 344 void 345 resettodr(void) 346 { 347 348 if (time.tv_sec == 0) 349 return; 350 351 if (todr_handle != NULL && 352 todr_settime(todr_handle, (struct timeval *)&time) != 0) 353 printf("resettodr: failed to set time\n"); 354 } 355 356 /* 357 * clockhandler: 358 * 359 * Handle the hardclock interrupt. 360 */ 361 int 362 clockhandler(void *arg) 363 { 364 struct clockframe *frame = arg; 365 366 /* ACK the interrupt. */ 367 BECC_CSR_WRITE(BECC_TSCRA, TSCRx_TE | TSCRx_CM | TSCRx_TIF); 368 369 hardclock(frame); 370 371 if (becc_hardclock_hook != NULL) 372 (*becc_hardclock_hook)(); 373 374 return (1); 375 } 376