1/* $NetBSD: sun50i-a64-pinebook.dts,v 1.19 2021/11/07 17:11:43 jmcneill Exp $ */ 2 3/*- 4 * Copyright (c) 2017-2019,2021 Jared McNeill <jmcneill@invisible.ca> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 17 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 19 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 21 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 22 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 23 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 24 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29#include "../../../external/gpl2/dts/dist/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts" 30#include "sun50i-a64.dtsi" 31 32#include <dt-bindings/gpio/gpio.h> 33 34&uart1 { 35 pinctrl-names = "default"; 36 pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; 37 status = "okay"; 38 bluetooth { 39 compatible = "realtek,rtl8723cs-bt"; 40 reset-gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; /* PL4 */ 41 device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */ 42 host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ 43 firmware-postfix = "pinebook"; 44 }; 45}; 46 47&i2s2 { 48 status = "okay"; 49}; 50 51&sound_hdmi { 52 status = "okay"; 53}; 54