Man page generated from reStructuredText.
. . .nr rst2man-indent-level 0 . \\$1 \\n[an-margin] level \\n[rst2man-indent-level] level margin: \\n[rst2man-indent\\n[rst2man-indent-level]] - \\n[rst2man-indent0] \\n[rst2man-indent1] \\n[rst2man-indent2] .. .rstReportMargin pre:
. RS \\$1 . nr rst2man-indent\\n[rst2man-indent-level] \\n[an-margin] . nr rst2man-indent-level +1 .rstReportMargin post:
.. . RE indent \\n[an-margin]
old: \\n[rst2man-indent\\n[rst2man-indent-level]]
.nr rst2man-indent-level -1 new: \\n[rst2man-indent\\n[rst2man-indent-level]]
.. named-compilezone - zone file validity checking or converting tool named-compilezone [-d] [-h] [-j] [-q] [-v] [-c class] [-C mode] [-f format] [-F format] [-J filename] [-i mode] [-k mode] [-m mode] [-M mode] [-n mode] [-l ttl] [-L serial] [-r mode] [-s style] [-S mode] [-t directory] [-T mode] [-w directory] [-D] [-W mode] {-o filename} {zonename} {filename} named-compilezone checks the syntax and integrity of a zone file, and dumps the zone contents to a specified file in a specified format. Unlike named-checkzone, zone contents are not strictly checked by default. If the output is to be used as an actual zone file to be loaded by \%named, then the check levels should be manually configured to be at least as strict as those specified in the \%named configuration file. Running named-checkzone on the input prior to compiling will ensure that the zone compiles with the default requirements of \%named. NDENT 0.0

-d This option enables debugging. NINDENT NDENT 0.0

-h This option prints the usage summary and exits. NINDENT NDENT 0.0

-q This option sets quiet mode, which only sets an exit code to indicate successful or failed completion. NINDENT NDENT 0.0

-v This option prints the version of the \%named-checkzone program and exits. NINDENT NDENT 0.0

-j When loading a zone file, this option tells \%named to read the journal if it exists. The journal file name is assumed to be the zone file name with the string .jnl appended. NINDENT NDENT 0.0

-J filename When loading the zone file, this option tells \%named to read the journal from the given file, if it exists. This implies \%-j. NINDENT NDENT 0.0

-c class This option specifies the class of the zone. If not specified, IN is assumed. NINDENT NDENT 0.0

-C mode This option controls check mode on zone files when loading. Possible modes are check-svcb:fail and check-svcb:ignore. check-svcb:fail turns on additional checks on _dns SVCB records and check-svcb:ignore disables these checks. The default is check-svcb:ignore. NINDENT NDENT 0.0

-i mode This option performs post-load zone integrity checks. Possible modes are full, full-sibling, local, local-sibling, and none (the default). Mode full checks that MX records refer to A or AAAA records (both in-zone and out-of-zone hostnames). Mode local only checks MX records which refer to in-zone hostnames. Mode full checks that SRV records refer to A or AAAA records (both in-zone and out-of-zone hostnames). Mode local only checks SRV records which refer to in-zone hostnames. Mode full checks that delegation NS records refer to A or AAAA records (both in-zone and out-of-zone hostnames). It also checks that glue address records in the zone match those advertised by the child. Mode local only checks NS records which refer to in-zone hostnames or verifies that some required glue exists, i.e., when the name server is in a child zone. Modes full-sibling and local-sibling disable sibling glue checks, but are otherwise the same as full and local, respectively. Mode none disables the checks. NINDENT NDENT 0.0

-f format This option specifies the format of the zone file. Possible formats are text (the default), and raw. NINDENT NDENT 0.0

-F format This option specifies the format of the output file specified. For \%named-checkzone, this does not have any effect unless it dumps the zone contents. Possible formats are text (the default), which is the standard textual representation of the zone, and raw and raw=N, which store the zone in a binary format for rapid loading by \%named. raw=N specifies the format version of the raw zone file: if N is 0, the raw file can be read by any version of \%named; if N is 1, the file can only be read by release 9.9.0 or higher. The default is 1. NINDENT NDENT 0.0

-k mode This option performs check-names checks with the specified failure mode. Possible modes are fail, warn, and ignore (the default). NINDENT NDENT 0.0

-l ttl This option sets a maximum permissible TTL for the input file. Any record with a TTL higher than this value causes the zone to be rejected. This is similar to using the max-zone-ttl option in \%named.conf. NINDENT NDENT 0.0

-L serial When compiling a zone to raw format, this option sets the \(dqsource serial\(dq value in the header to the specified serial number. This is expected to be used primarily for testing purposes. NINDENT NDENT 0.0

-m mode This option specifies whether MX records should be checked to see if they are addresses. Possible modes are fail, warn, and ignore (the default). NINDENT NDENT 0.0

-M mode This option checks whether a MX record refers to a CNAME. Possible modes are fail, warn, and ignore (the default). NINDENT NDENT 0.0

-n mode This option specifies whether NS records should be checked to see if they are addresses. Possible modes are fail, warn, and ignore (the default). NINDENT NDENT 0.0

-o filename This option writes the zone output to filename. If filename is -, then the zone output is written to standard output. This is mandatory for named-compilezone. NINDENT NDENT 0.0

-r mode This option checks for records that are treated as different by DNSSEC but are semantically equal in plain DNS. Possible modes are fail, warn, and ignore (the default). NINDENT NDENT 0.0

-s style This option specifies the style of the dumped zone file. Possible styles are full (the default) and relative. The full format is most suitable for processing automatically by a separate script. The relative format is more human-readable and is thus suitable for editing by hand. NINDENT NDENT 0.0

-S mode This option checks whether an SRV record refers to a CNAME. Possible modes are fail, warn, and ignore (the default). NINDENT NDENT 0.0

-t directory This option tells \%named to chroot to directory, so that include directives in the configuration file are processed as if run by a similarly chrooted \%named. NINDENT NDENT 0.0

-T mode This option checks whether Sender Policy Framework (SPF) records exist and issues a warning if an SPF-formatted TXT record is not also present. Possible modes are warn and ignore (the default). NINDENT NDENT 0.0

-w directory This option instructs \%named to chdir to directory, so that relative filenames in master file $INCLUDE directives work. This is similar to the directory clause in \%named.conf. NINDENT NDENT 0.0

-D This option dumps the zone file in canonical format. This is always enabled for named-compilezone. NINDENT NDENT 0.0

-W mode This option specifies whether to check for non-terminal wildcards. Non-terminal wildcards are almost always the result of a failure to understand the wildcard matching algorithm (\X'tty: link https://datatracker.ietf.org/doc/html/rfc4592.html'\%RFC 4592\X'tty: link'). Possible modes are warn and ignore (the default). NINDENT NDENT 0.0

zonename This indicates the domain name of the zone being checked. NINDENT NDENT 0.0

filename This is the name of the zone file. NINDENT

named-compilezone returns an exit status of 1 if errors were detected and 0 otherwise. \%named(8), \%named-checkconf(8), \%named-checkzone(8), \X'tty: link https://datatracker.ietf.org/doc/html/rfc1035.html'\%RFC 1035\X'tty: link', BIND 9 Administrator Reference Manual. Internet Systems Consortium 2024, Internet Systems Consortium Generated by docutils manpage writer.
.