1 /* Copyright (C) 2000-2020 Free Software Foundation, Inc. 2 3 This file is part of GCC. 4 5 GCC is free software; you can redistribute it and/or modify it under 6 the terms of the GNU General Public License as published by the Free 7 Software Foundation; either version 3, or (at your option) any later 8 version. 9 10 GCC is distributed in the hope that it will be useful, but WITHOUT ANY 11 WARRANTY; without even the implied warranty of MERCHANTABILITY or 12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 13 for more details. 14 15 Under Section 7 of GPL version 3, you are granted additional 16 permissions described in the GCC Runtime Library Exception, version 17 3.1, as published by the Free Software Foundation. 18 19 You should have received a copy of the GNU General Public License and 20 a copy of the GCC Runtime Library Exception along with this program; 21 see the files COPYING3 and COPYING.RUNTIME respectively. If not, see 22 <http://www.gnu.org/licenses/>. */ 23 24 /* Standard register usage. */ 25 26 /* Number of actual hardware registers. 27 The hardware registers are assigned numbers for the compiler 28 from 0 to just below FIRST_PSEUDO_REGISTER. 29 All registers that the compiler knows about must be given numbers, 30 even those that are not normally considered general registers. 31 32 HP-PA 1.0 has 32 fullword registers and 16 floating point 33 registers. The floating point registers hold either word or double 34 word values. 35 36 16 additional registers are reserved. 37 38 HP-PA 1.1 has 32 fullword registers and 32 floating point 39 registers. However, the floating point registers behave 40 differently: the left and right halves of registers are addressable 41 as 32-bit registers. So, we will set things up like the 68k which 42 has different fp units: define separate register sets for the 1.0 43 and 1.1 fp units. */ 44 45 #define FIRST_PSEUDO_REGISTER 90 /* 32 general regs + 56 fp regs + 46 + 1 shift reg + frame pointer */ 47 48 /* 1 for registers that have pervasive standard uses 49 and are not available for the register allocator. 50 51 On the HP-PA, these are: 52 Reg 0 = 0 (hardware). However, 0 is used for condition code, 53 so is not fixed. 54 Reg 1 = ADDIL target/Temporary (hardware). 55 Reg 2 = Return Pointer 56 Reg 3 = Frame Pointer 57 Reg 4 = Frame Pointer (>8k varying frame with HP compilers only) 58 Reg 4-18 = Preserved Registers 59 Reg 19 = Linkage Table Register in HPUX 8.0 shared library scheme. 60 Reg 20-22 = Temporary Registers 61 Reg 23-26 = Temporary/Parameter Registers 62 Reg 27 = Global Data Pointer (hp) 63 Reg 28 = Temporary/Return Value register 64 Reg 29 = Temporary/Static Chain/Return Value register #2 65 Reg 30 = stack pointer 66 Reg 31 = Temporary/Millicode Return Pointer (hp) 67 68 Freg 0-3 = Status Registers -- Not known to the compiler. 69 Freg 4-7 = Arguments/Return Value 70 Freg 8-11 = Temporary Registers 71 Freg 12-15 = Preserved Registers 72 73 Freg 16-31 = Reserved 74 75 On the Snake, fp regs are 76 77 Freg 0-3 = Status Registers -- Not known to the compiler. 78 Freg 4L-7R = Arguments/Return Value 79 Freg 8L-11R = Temporary Registers 80 Freg 12L-21R = Preserved Registers 81 Freg 22L-31R = Temporary Registers 82 83 */ 84 85 #define FIXED_REGISTERS \ 86 {0, 0, 0, 0, 0, 0, 0, 0, \ 87 0, 0, 0, 0, 0, 0, 0, 0, \ 88 0, 0, 0, 0, 0, 0, 0, 0, \ 89 0, 0, 0, 1, 0, 0, 1, 0, \ 90 /* fp registers */ \ 91 0, 0, 0, 0, 0, 0, 0, 0, \ 92 0, 0, 0, 0, 0, 0, 0, 0, \ 93 0, 0, 0, 0, 0, 0, 0, 0, \ 94 0, 0, 0, 0, 0, 0, 0, 0, \ 95 0, 0, 0, 0, 0, 0, 0, 0, \ 96 0, 0, 0, 0, 0, 0, 0, 0, \ 97 0, 0, 0, 0, 0, 0, 0, 0, \ 98 /* shift register and soft frame pointer */ \ 99 0, 1} 100 101 /* 1 for registers not available across function calls. 102 These must include the FIXED_REGISTERS and also any 103 registers that can be used without being saved. 104 The latter must include the registers where values are returned 105 and the register where structure-value addresses are passed. 106 Aside from that, you can include as many other registers as you like. */ 107 #define CALL_USED_REGISTERS \ 108 {1, 1, 1, 0, 0, 0, 0, 0, \ 109 0, 0, 0, 0, 0, 0, 0, 0, \ 110 0, 0, 0, 1, 1, 1, 1, 1, \ 111 1, 1, 1, 1, 1, 1, 1, 1, \ 112 /* fp registers */ \ 113 1, 1, 1, 1, 1, 1, 1, 1, \ 114 1, 1, 1, 1, 1, 1, 1, 1, \ 115 0, 0, 0, 0, 0, 0, 0, 0, \ 116 0, 0, 0, 0, 0, 0, 0, 0, \ 117 0, 0, 0, 0, 1, 1, 1, 1, \ 118 1, 1, 1, 1, 1, 1, 1, 1, \ 119 1, 1, 1, 1, 1, 1, 1, 1, \ 120 /* shift register and soft frame pointer */ \ 121 1, 1} 122 123 /* Allocate the call used registers first. This should minimize 124 the number of registers that need to be saved (as call used 125 registers will generally not be allocated across a call). 126 127 Experimentation has shown slightly better results by allocating 128 FP registers first. We allocate the caller-saved registers more 129 or less in reverse order to their allocation as arguments. 130 131 FP registers are ordered so that all L registers are selected before 132 R registers. This works around a false dependency interlock on the 133 PA8000 when accessing the high and low parts of an FP register 134 independently. */ 135 136 #define REG_ALLOC_ORDER \ 137 { \ 138 /* caller-saved fp regs. */ \ 139 68, 70, 72, 74, 76, 78, 80, 82, \ 140 84, 86, 40, 42, 44, 46, 38, 36, \ 141 34, 32, \ 142 69, 71, 73, 75, 77, 79, 81, 83, \ 143 85, 87, 41, 43, 45, 47, 39, 37, \ 144 35, 33, \ 145 /* caller-saved general regs. */ \ 146 28, 19, 20, 21, 22, 31, 27, 29, \ 147 23, 24, 25, 26, 2, \ 148 /* callee-saved fp regs. */ \ 149 48, 50, 52, 54, 56, 58, 60, 62, \ 150 64, 66, \ 151 49, 51, 53, 55, 57, 59, 61, 63, \ 152 65, 67, \ 153 /* callee-saved general regs. */ \ 154 3, 4, 5, 6, 7, 8, 9, 10, \ 155 11, 12, 13, 14, 15, 16, 17, 18, \ 156 /* special registers. */ \ 157 1, 30, 0, 88, 89} 158 159 160 /* Return number of consecutive hard regs needed starting at reg REGNO 161 to hold something of mode MODE. 162 This is ordinarily the length in words of a value of mode MODE 163 but can be less for certain modes in special long registers. 164 165 On the HP-PA, general registers are 32 bits wide. The floating 166 point registers are 64 bits wide. Snake fp regs are treated as 167 32 bits wide since the left and right parts are independently 168 accessible. */ 169 #define PA_HARD_REGNO_NREGS(REGNO, MODE) \ 170 (FP_REGNO_P (REGNO) \ 171 ? (!TARGET_PA_11 \ 172 ? COMPLEX_MODE_P (MODE) ? 2 : 1 \ 173 : (GET_MODE_SIZE (MODE) + 4 - 1) / 4) \ 174 : (GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD) 175 176 /* There are no instructions that use DImode in PA 1.0, so we only 177 allow it in PA 1.1 and later. */ 178 #define VALID_FP_MODE_P(MODE) \ 179 ((MODE) == SFmode || (MODE) == DFmode \ 180 || (MODE) == SCmode || (MODE) == DCmode \ 181 || (MODE) == SImode || (TARGET_PA_11 && (MODE) == DImode)) 182 183 /* Value is 1 if hard register REGNO can hold a value of machine-mode MODE. 184 185 On the HP-PA, the cpu registers can hold any mode that fits in 32 bits. 186 For the 64-bit modes, we choose a set of non-overlapping general registers 187 that includes the incoming arguments and the return value. We specify a 188 set with no overlaps so that we don't have to specify that the destination 189 register is an early clobber in patterns using this mode. Except for the 190 return value, the starting registers are odd. For 128 and 256 bit modes, 191 we similarly specify non-overlapping sets of cpu registers. However, 192 there aren't any patterns defined for modes larger than 64 bits at the 193 moment. 194 195 We limit the modes allowed in the floating point registers to the 196 set of modes used in the machine definition. In addition, we allow 197 the complex modes SCmode and DCmode. The real and imaginary parts 198 of complex modes are allocated to separate registers. This might 199 allow patterns to be defined in the future to operate on these values. 200 201 The PA 2.0 architecture specifies that quad-precision floating-point 202 values should start on an even floating point register. Thus, we 203 choose non-overlapping sets of registers starting on even register 204 boundaries for large modes. However, there is currently no support 205 in the machine definition for modes larger than 64 bits. TFmode is 206 supported under HP-UX using libcalls. Since TFmode values are passed 207 by reference, they never need to be loaded into the floating-point 208 registers. */ 209 #define PA_HARD_REGNO_MODE_OK(REGNO, MODE) \ 210 ((REGNO) == 0 ? (MODE) == CCmode || (MODE) == CCFPmode \ 211 : (REGNO) == 88 ? SCALAR_INT_MODE_P (MODE) \ 212 : !TARGET_PA_11 && FP_REGNO_P (REGNO) \ 213 ? (VALID_FP_MODE_P (MODE) \ 214 && (GET_MODE_SIZE (MODE) <= 8 \ 215 || (GET_MODE_SIZE (MODE) == 16 && ((REGNO) & 3) == 0))) \ 216 : FP_REGNO_P (REGNO) \ 217 ? (VALID_FP_MODE_P (MODE) \ 218 && (GET_MODE_SIZE (MODE) <= 4 \ 219 || (GET_MODE_SIZE (MODE) == 8 && ((REGNO) & 1) == 0) \ 220 || (GET_MODE_SIZE (MODE) == 16 && ((REGNO) & 3) == 0) \ 221 || (GET_MODE_SIZE (MODE) == 32 && ((REGNO) & 7) == 0))) \ 222 : (GET_MODE_SIZE (MODE) <= UNITS_PER_WORD \ 223 || (GET_MODE_SIZE (MODE) == 2 * UNITS_PER_WORD \ 224 && ((((REGNO) & 1) == 1 && (REGNO) <= 25) || (REGNO) == 28)) \ 225 || (GET_MODE_SIZE (MODE) == 4 * UNITS_PER_WORD \ 226 && ((REGNO) & 3) == 3 && (REGNO) <= 23) \ 227 || (GET_MODE_SIZE (MODE) == 8 * UNITS_PER_WORD \ 228 && ((REGNO) & 7) == 3 && (REGNO) <= 19))) 229 230 /* How to renumber registers for dbx and gdb. 231 232 Registers 0 - 31 remain unchanged. 233 234 Registers 32 - 87 are mapped to 72 - 127 235 236 Register 88 is mapped to 32. */ 237 238 #define DBX_REGISTER_NUMBER(REGNO) \ 239 ((REGNO) <= 31 ? (REGNO) : \ 240 ((REGNO) <= 87 ? (REGNO) + 40 : 32)) 241 242 /* We must not use the DBX register numbers for the DWARF 2 CFA column 243 numbers because that maps to numbers beyond FIRST_PSEUDO_REGISTER. 244 Instead use the identity mapping. */ 245 #define DWARF_FRAME_REGNUM(REG) REG 246 247 /* Define the classes of registers for register constraints in the 248 machine description. Also define ranges of constants. 249 250 One of the classes must always be named ALL_REGS and include all hard regs. 251 If there is more than one class, another class must be named NO_REGS 252 and contain no registers. 253 254 The name GENERAL_REGS must be the name of a class (or an alias for 255 another name such as ALL_REGS). This is the class of registers 256 that is allowed by "g" or "r" in a register constraint. 257 Also, registers outside this class are allocated only when 258 instructions express preferences for them. 259 260 The classes must be numbered in nondecreasing order; that is, 261 a larger-numbered class must never be contained completely 262 in a smaller-numbered class. 263 264 For any two classes, it is very desirable that there be another 265 class that represents their union. */ 266 267 /* The HP-PA has four kinds of registers: general regs, 1.0 fp regs, 268 1.1 fp regs, and the high 1.1 fp regs, to which the operands of 269 fmpyadd and fmpysub are restricted. */ 270 271 enum reg_class { NO_REGS, R1_REGS, GENERAL_REGS, FPUPPER_REGS, FP_REGS, 272 GENERAL_OR_FP_REGS, SHIFT_REGS, ALL_REGS, LIM_REG_CLASSES}; 273 274 #define N_REG_CLASSES (int) LIM_REG_CLASSES 275 276 /* Give names of register classes as strings for dump file. */ 277 278 #define REG_CLASS_NAMES \ 279 {"NO_REGS", "R1_REGS", "GENERAL_REGS", "FPUPPER_REGS", "FP_REGS", \ 280 "GENERAL_OR_FP_REGS", "SHIFT_REGS", "ALL_REGS"} 281 282 /* Define which registers fit in which classes. 283 This is an initializer for a vector of HARD_REG_SET 284 of length N_REG_CLASSES. Register 0, the "condition code" register, 285 is in no class. */ 286 287 #define REG_CLASS_CONTENTS \ 288 {{0x00000000, 0x00000000, 0x00000000}, /* NO_REGS */ \ 289 {0x00000002, 0x00000000, 0x00000000}, /* R1_REGS */ \ 290 {0xfffffffe, 0x00000000, 0x02000000}, /* GENERAL_REGS */ \ 291 {0x00000000, 0xff000000, 0x00ffffff}, /* FPUPPER_REGS */ \ 292 {0x00000000, 0xffffffff, 0x00ffffff}, /* FP_REGS */ \ 293 {0xfffffffe, 0xffffffff, 0x02ffffff}, /* GENERAL_OR_FP_REGS */ \ 294 {0x00000000, 0x00000000, 0x01000000}, /* SHIFT_REGS */ \ 295 {0xfffffffe, 0xffffffff, 0x03ffffff}} /* ALL_REGS */ 296 297 /* Return the class number of the smallest class containing 298 reg number REGNO. This could be a conditional expression 299 or could index an array. */ 300 301 #define REGNO_REG_CLASS(REGNO) \ 302 ((REGNO) == 0 ? NO_REGS \ 303 : (REGNO) == 1 ? R1_REGS \ 304 : (REGNO) < 32 || (REGNO) == 89 ? GENERAL_REGS \ 305 : (REGNO) < 56 ? FP_REGS \ 306 : (REGNO) < 88 ? FPUPPER_REGS \ 307 : SHIFT_REGS) 308 309 /* Return the maximum number of consecutive registers 310 needed to represent mode MODE in a register of class CLASS. */ 311 #define CLASS_MAX_NREGS(CLASS, MODE) \ 312 ((CLASS) == FP_REGS || (CLASS) == FPUPPER_REGS \ 313 ? (!TARGET_PA_11 \ 314 ? COMPLEX_MODE_P (MODE) ? 2 : 1 \ 315 : (GET_MODE_SIZE (MODE) + 4 - 1) / 4) \ 316 : ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)) 317 318 /* 1 if N is a possible register number for function argument passing. */ 319 320 #define FUNCTION_ARG_REGNO_P(N) \ 321 (((N) >= 23 && (N) <= 26) || (! TARGET_SOFT_FLOAT && (N) >= 32 && (N) <= 39)) 322 323 /* How to refer to registers in assembler output. 324 This sequence is indexed by compiler's hard-register-number (see above). */ 325 326 #define REGISTER_NAMES \ 327 {"%r0", "%r1", "%r2", "%r3", "%r4", "%r5", "%r6", "%r7", \ 328 "%r8", "%r9", "%r10", "%r11", "%r12", "%r13", "%r14", "%r15", \ 329 "%r16", "%r17", "%r18", "%r19", "%r20", "%r21", "%r22", "%r23", \ 330 "%r24", "%r25", "%r26", "%r27", "%r28", "%r29", "%r30", "%r31", \ 331 "%fr4", "%fr4R", "%fr5", "%fr5R", "%fr6", "%fr6R", "%fr7", "%fr7R", \ 332 "%fr8", "%fr8R", "%fr9", "%fr9R", "%fr10", "%fr10R", "%fr11", "%fr11R", \ 333 "%fr12", "%fr12R", "%fr13", "%fr13R", "%fr14", "%fr14R", "%fr15", "%fr15R", \ 334 "%fr16", "%fr16R", "%fr17", "%fr17R", "%fr18", "%fr18R", "%fr19", "%fr19R", \ 335 "%fr20", "%fr20R", "%fr21", "%fr21R", "%fr22", "%fr22R", "%fr23", "%fr23R", \ 336 "%fr24", "%fr24R", "%fr25", "%fr25R", "%fr26", "%fr26R", "%fr27", "%fr27R", \ 337 "%fr28", "%fr28R", "%fr29", "%fr29R", "%fr30", "%fr30R", "%fr31", "%fr31R", \ 338 "SAR", "sfp"} 339 340 #define ADDITIONAL_REGISTER_NAMES \ 341 {{"%fr4L",32}, {"%fr5L",34}, {"%fr6L",36}, {"%fr7L",38}, \ 342 {"%fr8L",40}, {"%fr9L",42}, {"%fr10L",44}, {"%fr11L",46}, \ 343 {"%fr12L",48}, {"%fr13L",50}, {"%fr14L",52}, {"%fr15L",54}, \ 344 {"%fr16L",56}, {"%fr17L",58}, {"%fr18L",60}, {"%fr19L",62}, \ 345 {"%fr20L",64}, {"%fr21L",66}, {"%fr22L",68}, {"%fr23L",70}, \ 346 {"%fr24L",72}, {"%fr25L",74}, {"%fr26L",76}, {"%fr27L",78}, \ 347 {"%fr28L",80}, {"%fr29L",82}, {"%fr30L",84}, {"%fr31R",86}, \ 348 {"%cr11",88}} 349 350 #define FP_SAVED_REG_LAST 66 351 #define FP_SAVED_REG_FIRST 48 352 #define FP_REG_STEP 2 353 #define FP_REG_FIRST 32 354 #define FP_REG_LAST 87 355