1# Makefile.in generated by automake 1.15 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994-2014 Free Software Foundation, Inc. 5 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17# This file is part of flex. 18 19# Redistribution and use in source and binary forms, with or without 20# modification, are permitted provided that the following conditions 21# are met: 22 23# 1. Redistributions of source code must retain the above copyright 24# notice, this list of conditions and the following disclaimer. 25# 2. Redistributions in binary form must reproduce the above copyright 26# notice, this list of conditions and the following disclaimer in the 27# documentation and/or other materials provided with the distribution. 28 29# Neither the name of the University nor the names of its contributors 30# may be used to endorse or promote products derived from this software 31# without specific prior written permission. 32 33# THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR 34# IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED 35# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 36# PURPOSE. 37 38# Notes on building: 39 40# Possible values for DEFS: 41# 42# By default, flex generates 8-bit scanners when using table compression, 43# and 7-bit scanners when using uncompressed tables (-f or -F options). 44# For flex to always generate 8-bit scanners, add "-DDEFAULT_CSIZE=256" 45# to DEFS. 46 47VPATH = @srcdir@ 48am__is_gnu_make = { \ 49 if test -z '$(MAKELEVEL)'; then \ 50 false; \ 51 elif test -n '$(MAKE_HOST)'; then \ 52 true; \ 53 elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ 54 true; \ 55 else \ 56 false; \ 57 fi; \ 58} 59am__make_running_with_option = \ 60 case $${target_option-} in \ 61 ?) ;; \ 62 *) echo "am__make_running_with_option: internal error: invalid" \ 63 "target option '$${target_option-}' specified" >&2; \ 64 exit 1;; \ 65 esac; \ 66 has_opt=no; \ 67 sane_makeflags=$$MAKEFLAGS; \ 68 if $(am__is_gnu_make); then \ 69 sane_makeflags=$$MFLAGS; \ 70 else \ 71 case $$MAKEFLAGS in \ 72 *\\[\ \ ]*) \ 73 bs=\\; \ 74 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ 75 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ 76 esac; \ 77 fi; \ 78 skip_next=no; \ 79 strip_trailopt () \ 80 { \ 81 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ 82 }; \ 83 for flg in $$sane_makeflags; do \ 84 test $$skip_next = yes && { skip_next=no; continue; }; \ 85 case $$flg in \ 86 *=*|--*) continue;; \ 87 -*I) strip_trailopt 'I'; skip_next=yes;; \ 88 -*I?*) strip_trailopt 'I';; \ 89 -*O) strip_trailopt 'O'; skip_next=yes;; \ 90 -*O?*) strip_trailopt 'O';; \ 91 -*l) strip_trailopt 'l'; skip_next=yes;; \ 92 -*l?*) strip_trailopt 'l';; \ 93 -[dEDm]) skip_next=yes;; \ 94 -[JT]) skip_next=yes;; \ 95 esac; \ 96 case $$flg in \ 97 *$$target_option*) has_opt=yes; break;; \ 98 esac; \ 99 done; \ 100 test $$has_opt = yes 101am__make_dryrun = (target_option=n; $(am__make_running_with_option)) 102am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) 103pkgdatadir = $(datadir)/@PACKAGE@ 104pkgincludedir = $(includedir)/@PACKAGE@ 105pkglibdir = $(libdir)/@PACKAGE@ 106pkglibexecdir = $(libexecdir)/@PACKAGE@ 107am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 108install_sh_DATA = $(install_sh) -c -m 644 109install_sh_PROGRAM = $(install_sh) -c 110install_sh_SCRIPT = $(install_sh) -c 111INSTALL_HEADER = $(INSTALL_DATA) 112transform = $(program_transform_name) 113NORMAL_INSTALL = : 114PRE_INSTALL = : 115POST_INSTALL = : 116NORMAL_UNINSTALL = : 117PRE_UNINSTALL = : 118POST_UNINSTALL = : 119build_triplet = @build@ 120host_triplet = @host@ 121subdir = . 122ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 123am__aclocal_m4_deps = $(top_srcdir)/m4/ax_prog_cc_for_build.m4 \ 124 $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \ 125 $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \ 126 $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ 127 $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ 128 $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ 129 $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ 130 $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ 131 $(top_srcdir)/configure.ac 132am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 133 $(ACLOCAL_M4) 134DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ 135 $(am__configure_deps) $(dist_doc_DATA) $(am__DIST_COMMON) 136am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ 137 configure.lineno config.status.lineno 138mkinstalldirs = $(install_sh) -d 139CONFIG_HEADER = $(top_builddir)/src/config.h 140CONFIG_CLEAN_FILES = 141CONFIG_CLEAN_VPATH_FILES = 142AM_V_P = $(am__v_P_@AM_V@) 143am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) 144am__v_P_0 = false 145am__v_P_1 = : 146AM_V_GEN = $(am__v_GEN_@AM_V@) 147am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) 148am__v_GEN_0 = @echo " GEN " $@; 149am__v_GEN_1 = 150AM_V_at = $(am__v_at_@AM_V@) 151am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) 152am__v_at_0 = @ 153am__v_at_1 = 154SOURCES = 155DIST_SOURCES = 156RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ 157 ctags-recursive dvi-recursive html-recursive info-recursive \ 158 install-data-recursive install-dvi-recursive \ 159 install-exec-recursive install-html-recursive \ 160 install-info-recursive install-pdf-recursive \ 161 install-ps-recursive install-recursive installcheck-recursive \ 162 installdirs-recursive pdf-recursive ps-recursive \ 163 tags-recursive uninstall-recursive 164am__can_run_installinfo = \ 165 case $$AM_UPDATE_INFO_DIR in \ 166 n|no|NO) false;; \ 167 *) (install-info --version) >/dev/null 2>&1;; \ 168 esac 169am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; 170am__vpath_adj = case $$p in \ 171 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ 172 *) f=$$p;; \ 173 esac; 174am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; 175am__install_max = 40 176am__nobase_strip_setup = \ 177 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` 178am__nobase_strip = \ 179 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" 180am__nobase_list = $(am__nobase_strip_setup); \ 181 for p in $$list; do echo "$$p $$p"; done | \ 182 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ 183 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ 184 if (++n[$$2] == $(am__install_max)) \ 185 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ 186 END { for (dir in files) print dir, files[dir] }' 187am__base_list = \ 188 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ 189 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' 190am__uninstall_files_from_dir = { \ 191 test -z "$$files" \ 192 || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ 193 || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ 194 $(am__cd) "$$dir" && rm -f $$files; }; \ 195 } 196am__installdirs = "$(DESTDIR)$(docdir)" 197DATA = $(dist_doc_DATA) 198RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 199 distclean-recursive maintainer-clean-recursive 200am__recursive_targets = \ 201 $(RECURSIVE_TARGETS) \ 202 $(RECURSIVE_CLEAN_TARGETS) \ 203 $(am__extra_recursive_targets) 204AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ 205 cscope distdir dist dist-all distcheck 206am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) 207# Read a list of newline-separated strings from the standard input, 208# and print each of them once, without duplicates. Input order is 209# *not* preserved. 210am__uniquify_input = $(AWK) '\ 211 BEGIN { nonempty = 0; } \ 212 { items[$$0] = 1; nonempty = 1; } \ 213 END { if (nonempty) { for (i in items) print i; }; } \ 214' 215# Make sure the list of sources is unique. This is necessary because, 216# e.g., the same source file might be shared among _SOURCES variables 217# for different programs/libraries. 218am__define_uniq_tagged_files = \ 219 list='$(am__tagged_files)'; \ 220 unique=`for i in $$list; do \ 221 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 222 done | $(am__uniquify_input)` 223ETAGS = etags 224CTAGS = ctags 225CSCOPE = cscope 226DIST_SUBDIRS = $(SUBDIRS) 227am__DIST_COMMON = $(srcdir)/Makefile.in \ 228 $(top_srcdir)/build-aux/compile \ 229 $(top_srcdir)/build-aux/config.guess \ 230 $(top_srcdir)/build-aux/config.rpath \ 231 $(top_srcdir)/build-aux/config.sub \ 232 $(top_srcdir)/build-aux/install-sh \ 233 $(top_srcdir)/build-aux/ltmain.sh \ 234 $(top_srcdir)/build-aux/missing ABOUT-NLS AUTHORS COPYING \ 235 ChangeLog NEWS THANKS build-aux/compile build-aux/config.guess \ 236 build-aux/config.rpath build-aux/config.sub \ 237 build-aux/install-sh build-aux/ltmain.sh build-aux/missing 238DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 239distdir = $(PACKAGE)-$(VERSION) 240top_distdir = $(distdir) 241am__remove_distdir = \ 242 if test -d "$(distdir)"; then \ 243 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ 244 && rm -rf "$(distdir)" \ 245 || { sleep 5 && rm -rf "$(distdir)"; }; \ 246 else :; fi 247am__post_remove_distdir = $(am__remove_distdir) 248am__relativize = \ 249 dir0=`pwd`; \ 250 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 251 sed_rest='s,^[^/]*/*,,'; \ 252 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 253 sed_butlast='s,/*[^/]*$$,,'; \ 254 while test -n "$$dir1"; do \ 255 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 256 if test "$$first" != "."; then \ 257 if test "$$first" = ".."; then \ 258 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 259 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 260 else \ 261 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 262 if test "$$first2" = "$$first"; then \ 263 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 264 else \ 265 dir2="../$$dir2"; \ 266 fi; \ 267 dir0="$$dir0"/"$$first"; \ 268 fi; \ 269 fi; \ 270 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 271 done; \ 272 reldir="$$dir2" 273DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.lz 274GZIP_ENV = --best 275DIST_TARGETS = dist-lzip dist-gzip 276distuninstallcheck_listfiles = find . -type f -print 277am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ 278 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' 279distcleancheck_listfiles = find . -type f -print 280ACLOCAL = @ACLOCAL@ 281ALLOCA = @ALLOCA@ 282AMTAR = @AMTAR@ 283AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 284AR = @AR@ 285AUTOCONF = @AUTOCONF@ 286AUTOHEADER = @AUTOHEADER@ 287AUTOMAKE = @AUTOMAKE@ 288AWK = @AWK@ 289BUILD_EXEEXT = @BUILD_EXEEXT@ 290BUILD_OBJEXT = @BUILD_OBJEXT@ 291CC = @CC@ 292CCDEPMODE = @CCDEPMODE@ 293CC_FOR_BUILD = @CC_FOR_BUILD@ 294CFLAGS = @CFLAGS@ 295CFLAGS_FOR_BUILD = @CFLAGS_FOR_BUILD@ 296CPP = @CPP@ 297CPPFLAGS = @CPPFLAGS@ 298CPPFLAGS_FOR_BUILD = @CPPFLAGS_FOR_BUILD@ 299CPP_FOR_BUILD = @CPP_FOR_BUILD@ 300CXX = @CXX@ 301CXXCPP = @CXXCPP@ 302CXXDEPMODE = @CXXDEPMODE@ 303CXXFLAGS = @CXXFLAGS@ 304CYGPATH_W = @CYGPATH_W@ 305DEFS = @DEFS@ 306DEPDIR = @DEPDIR@ 307DLLTOOL = @DLLTOOL@ 308DSYMUTIL = @DSYMUTIL@ 309DUMPBIN = @DUMPBIN@ 310ECHO_C = @ECHO_C@ 311ECHO_N = @ECHO_N@ 312ECHO_T = @ECHO_T@ 313EGREP = @EGREP@ 314EXEEXT = @EXEEXT@ 315FGREP = @FGREP@ 316GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ 317GMSGFMT = @GMSGFMT@ 318GMSGFMT_015 = @GMSGFMT_015@ 319GREP = @GREP@ 320HELP2MAN = @HELP2MAN@ 321INDENT = @INDENT@ 322INSTALL = @INSTALL@ 323INSTALL_DATA = @INSTALL_DATA@ 324INSTALL_PROGRAM = @INSTALL_PROGRAM@ 325INSTALL_SCRIPT = @INSTALL_SCRIPT@ 326INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 327INTLLIBS = @INTLLIBS@ 328INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ 329LD = @LD@ 330LDFLAGS = @LDFLAGS@ 331LDFLAGS_FOR_BUILD = @LDFLAGS_FOR_BUILD@ 332LEX = @LEX@ 333LEXLIB = @LEXLIB@ 334LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ 335LIBICONV = @LIBICONV@ 336LIBINTL = @LIBINTL@ 337LIBOBJS = @LIBOBJS@ 338LIBPTHREAD = @LIBPTHREAD@ 339LIBS = @LIBS@ 340LIBTOOL = @LIBTOOL@ 341LIPO = @LIPO@ 342LN_S = @LN_S@ 343LTLIBICONV = @LTLIBICONV@ 344LTLIBINTL = @LTLIBINTL@ 345LTLIBOBJS = @LTLIBOBJS@ 346LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ 347M4 = @M4@ 348MAKEINFO = @MAKEINFO@ 349MANIFEST_TOOL = @MANIFEST_TOOL@ 350MKDIR_P = @MKDIR_P@ 351MSGFMT = @MSGFMT@ 352MSGFMT_015 = @MSGFMT_015@ 353MSGMERGE = @MSGMERGE@ 354NM = @NM@ 355NMEDIT = @NMEDIT@ 356OBJDUMP = @OBJDUMP@ 357OBJEXT = @OBJEXT@ 358OTOOL = @OTOOL@ 359OTOOL64 = @OTOOL64@ 360PACKAGE = @PACKAGE@ 361PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 362PACKAGE_NAME = @PACKAGE_NAME@ 363PACKAGE_STRING = @PACKAGE_STRING@ 364PACKAGE_TARNAME = @PACKAGE_TARNAME@ 365PACKAGE_URL = @PACKAGE_URL@ 366PACKAGE_VERSION = @PACKAGE_VERSION@ 367PATH_SEPARATOR = @PATH_SEPARATOR@ 368POSUB = @POSUB@ 369RANLIB = @RANLIB@ 370SED = @SED@ 371SET_MAKE = @SET_MAKE@ 372SHARED_VERSION_INFO = @SHARED_VERSION_INFO@ 373SHELL = @SHELL@ 374STRIP = @STRIP@ 375TEXI2DVI = @TEXI2DVI@ 376USE_NLS = @USE_NLS@ 377VERSION = @VERSION@ 378WARNINGFLAGS = @WARNINGFLAGS@ 379XGETTEXT = @XGETTEXT@ 380XGETTEXT_015 = @XGETTEXT_015@ 381XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ 382YACC = @YACC@ 383YFLAGS = @YFLAGS@ 384abs_builddir = @abs_builddir@ 385abs_srcdir = @abs_srcdir@ 386abs_top_builddir = @abs_top_builddir@ 387abs_top_srcdir = @abs_top_srcdir@ 388ac_ct_AR = @ac_ct_AR@ 389ac_ct_CC = @ac_ct_CC@ 390ac_ct_CC_FOR_BUILD = @ac_ct_CC_FOR_BUILD@ 391ac_ct_CXX = @ac_ct_CXX@ 392ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 393am__include = @am__include@ 394am__leading_dot = @am__leading_dot@ 395am__quote = @am__quote@ 396am__tar = @am__tar@ 397am__untar = @am__untar@ 398bindir = @bindir@ 399build = @build@ 400build_alias = @build_alias@ 401build_cpu = @build_cpu@ 402build_os = @build_os@ 403build_vendor = @build_vendor@ 404builddir = @builddir@ 405datadir = @datadir@ 406datarootdir = @datarootdir@ 407docdir = @docdir@ 408dvidir = @dvidir@ 409exec_prefix = @exec_prefix@ 410host = @host@ 411host_alias = @host_alias@ 412host_cpu = @host_cpu@ 413host_os = @host_os@ 414host_vendor = @host_vendor@ 415htmldir = @htmldir@ 416includedir = @includedir@ 417infodir = @infodir@ 418install_sh = @install_sh@ 419libdir = @libdir@ 420libexecdir = @libexecdir@ 421localedir = @localedir@ 422localstatedir = @localstatedir@ 423mandir = @mandir@ 424mkdir_p = @mkdir_p@ 425oldincludedir = @oldincludedir@ 426pdfdir = @pdfdir@ 427prefix = @prefix@ 428program_transform_name = @program_transform_name@ 429psdir = @psdir@ 430runstatedir = @runstatedir@ 431sbindir = @sbindir@ 432sharedstatedir = @sharedstatedir@ 433srcdir = @srcdir@ 434sysconfdir = @sysconfdir@ 435target_alias = @target_alias@ 436top_build_prefix = @top_build_prefix@ 437top_builddir = @top_builddir@ 438top_srcdir = @top_srcdir@ 439ACLOCAL_AMFLAGS = -I m4 440dist_doc_DATA = \ 441 AUTHORS \ 442 COPYING \ 443 NEWS \ 444 ONEWS \ 445 README.md 446 447EXTRA_DIST = \ 448 .indent.pro \ 449 autogen.sh 450 451SUBDIRS = \ 452 src \ 453 doc \ 454 examples \ 455 po \ 456 tests \ 457 tools 458 459all: all-recursive 460 461.SUFFIXES: 462am--refresh: Makefile 463 @: 464$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 465 @for dep in $?; do \ 466 case '$(am__configure_deps)' in \ 467 *$$dep*) \ 468 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ 469 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ 470 && exit 0; \ 471 exit 1;; \ 472 esac; \ 473 done; \ 474 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ 475 $(am__cd) $(top_srcdir) && \ 476 $(AUTOMAKE) --foreign Makefile 477Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 478 @case '$?' in \ 479 *config.status*) \ 480 echo ' $(SHELL) ./config.status'; \ 481 $(SHELL) ./config.status;; \ 482 *) \ 483 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ 484 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ 485 esac; 486 487$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 488 $(SHELL) ./config.status --recheck 489 490$(top_srcdir)/configure: $(am__configure_deps) 491 $(am__cd) $(srcdir) && $(AUTOCONF) 492$(ACLOCAL_M4): $(am__aclocal_m4_deps) 493 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) 494$(am__aclocal_m4_deps): 495 496mostlyclean-libtool: 497 -rm -f *.lo 498 499clean-libtool: 500 -rm -rf .libs _libs 501 502distclean-libtool: 503 -rm -f libtool config.lt 504install-dist_docDATA: $(dist_doc_DATA) 505 @$(NORMAL_INSTALL) 506 @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \ 507 if test -n "$$list"; then \ 508 echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \ 509 $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \ 510 fi; \ 511 for p in $$list; do \ 512 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ 513 echo "$$d$$p"; \ 514 done | $(am__base_list) | \ 515 while read files; do \ 516 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \ 517 $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \ 518 done 519 520uninstall-dist_docDATA: 521 @$(NORMAL_UNINSTALL) 522 @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \ 523 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ 524 dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir) 525 526# This directory's subdirectories are mostly independent; you can cd 527# into them and run 'make' without going through this Makefile. 528# To change the values of 'make' variables: instead of editing Makefiles, 529# (1) if the variable is set in 'config.status', edit 'config.status' 530# (which will cause the Makefiles to be regenerated when you run 'make'); 531# (2) otherwise, pass the desired values on the 'make' command line. 532$(am__recursive_targets): 533 @fail=; \ 534 if $(am__make_keepgoing); then \ 535 failcom='fail=yes'; \ 536 else \ 537 failcom='exit 1'; \ 538 fi; \ 539 dot_seen=no; \ 540 target=`echo $@ | sed s/-recursive//`; \ 541 case "$@" in \ 542 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 543 *) list='$(SUBDIRS)' ;; \ 544 esac; \ 545 for subdir in $$list; do \ 546 echo "Making $$target in $$subdir"; \ 547 if test "$$subdir" = "."; then \ 548 dot_seen=yes; \ 549 local_target="$$target-am"; \ 550 else \ 551 local_target="$$target"; \ 552 fi; \ 553 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 554 || eval $$failcom; \ 555 done; \ 556 if test "$$dot_seen" = "no"; then \ 557 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 558 fi; test -z "$$fail" 559 560ID: $(am__tagged_files) 561 $(am__define_uniq_tagged_files); mkid -fID $$unique 562tags: tags-recursive 563TAGS: tags 564 565tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 566 set x; \ 567 here=`pwd`; \ 568 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 569 include_option=--etags-include; \ 570 empty_fix=.; \ 571 else \ 572 include_option=--include; \ 573 empty_fix=; \ 574 fi; \ 575 list='$(SUBDIRS)'; for subdir in $$list; do \ 576 if test "$$subdir" = .; then :; else \ 577 test ! -f $$subdir/TAGS || \ 578 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 579 fi; \ 580 done; \ 581 $(am__define_uniq_tagged_files); \ 582 shift; \ 583 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 584 test -n "$$unique" || unique=$$empty_fix; \ 585 if test $$# -gt 0; then \ 586 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 587 "$$@" $$unique; \ 588 else \ 589 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 590 $$unique; \ 591 fi; \ 592 fi 593ctags: ctags-recursive 594 595CTAGS: ctags 596ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 597 $(am__define_uniq_tagged_files); \ 598 test -z "$(CTAGS_ARGS)$$unique" \ 599 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 600 $$unique 601 602GTAGS: 603 here=`$(am__cd) $(top_builddir) && pwd` \ 604 && $(am__cd) $(top_srcdir) \ 605 && gtags -i $(GTAGS_ARGS) "$$here" 606cscope: cscope.files 607 test ! -s cscope.files \ 608 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) 609clean-cscope: 610 -rm -f cscope.files 611cscope.files: clean-cscope cscopelist 612cscopelist: cscopelist-recursive 613 614cscopelist-am: $(am__tagged_files) 615 list='$(am__tagged_files)'; \ 616 case "$(srcdir)" in \ 617 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ 618 *) sdir=$(subdir)/$(srcdir) ;; \ 619 esac; \ 620 for i in $$list; do \ 621 if test -f "$$i"; then \ 622 echo "$(subdir)/$$i"; \ 623 else \ 624 echo "$$sdir/$$i"; \ 625 fi; \ 626 done >> $(top_builddir)/cscope.files 627 628distclean-tags: 629 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 630 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files 631 632distdir: $(DISTFILES) 633 @case `sed 15q $(srcdir)/NEWS` in \ 634 *"$(VERSION)"*) : ;; \ 635 *) \ 636 echo "NEWS not updated; not releasing" 1>&2; \ 637 exit 1;; \ 638 esac 639 $(am__remove_distdir) 640 test -d "$(distdir)" || mkdir "$(distdir)" 641 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 642 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 643 list='$(DISTFILES)'; \ 644 dist_files=`for file in $$list; do echo $$file; done | \ 645 sed -e "s|^$$srcdirstrip/||;t" \ 646 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 647 case $$dist_files in \ 648 */*) $(MKDIR_P) `echo "$$dist_files" | \ 649 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 650 sort -u` ;; \ 651 esac; \ 652 for file in $$dist_files; do \ 653 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 654 if test -d $$d/$$file; then \ 655 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 656 if test -d "$(distdir)/$$file"; then \ 657 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 658 fi; \ 659 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 660 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 661 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 662 fi; \ 663 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 664 else \ 665 test -f "$(distdir)/$$file" \ 666 || cp -p $$d/$$file "$(distdir)/$$file" \ 667 || exit 1; \ 668 fi; \ 669 done 670 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 671 if test "$$subdir" = .; then :; else \ 672 $(am__make_dryrun) \ 673 || test -d "$(distdir)/$$subdir" \ 674 || $(MKDIR_P) "$(distdir)/$$subdir" \ 675 || exit 1; \ 676 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 677 $(am__relativize); \ 678 new_distdir=$$reldir; \ 679 dir1=$$subdir; dir2="$(top_distdir)"; \ 680 $(am__relativize); \ 681 new_top_distdir=$$reldir; \ 682 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 683 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 684 ($(am__cd) $$subdir && \ 685 $(MAKE) $(AM_MAKEFLAGS) \ 686 top_distdir="$$new_top_distdir" \ 687 distdir="$$new_distdir" \ 688 am__remove_distdir=: \ 689 am__skip_length_check=: \ 690 am__skip_mode_fix=: \ 691 distdir) \ 692 || exit 1; \ 693 fi; \ 694 done 695 -test -n "$(am__skip_mode_fix)" \ 696 || find "$(distdir)" -type d ! -perm -755 \ 697 -exec chmod u+rwx,go+rx {} \; -o \ 698 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ 699 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ 700 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ 701 || chmod -R a+r "$(distdir)" 702dist-gzip: distdir 703 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz 704 $(am__post_remove_distdir) 705 706dist-bzip2: distdir 707 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 708 $(am__post_remove_distdir) 709dist-lzip: distdir 710 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz 711 $(am__post_remove_distdir) 712 713dist-xz: distdir 714 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz 715 $(am__post_remove_distdir) 716 717dist-tarZ: distdir 718 @echo WARNING: "Support for distribution archives compressed with" \ 719 "legacy program 'compress' is deprecated." >&2 720 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 721 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z 722 $(am__post_remove_distdir) 723 724dist-shar: distdir 725 @echo WARNING: "Support for shar distribution archives is" \ 726 "deprecated." >&2 727 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 728 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz 729 $(am__post_remove_distdir) 730 731dist-zip: distdir 732 -rm -f $(distdir).zip 733 zip -rq $(distdir).zip $(distdir) 734 $(am__post_remove_distdir) 735 736dist dist-all: 737 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' 738 $(am__post_remove_distdir) 739 740# This target untars the dist file and tries a VPATH configuration. Then 741# it guarantees that the distribution is self-contained by making another 742# tarfile. 743distcheck: dist 744 case '$(DIST_ARCHIVES)' in \ 745 *.tar.gz*) \ 746 GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ 747 *.tar.bz2*) \ 748 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ 749 *.tar.lz*) \ 750 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ 751 *.tar.xz*) \ 752 xz -dc $(distdir).tar.xz | $(am__untar) ;;\ 753 *.tar.Z*) \ 754 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ 755 *.shar.gz*) \ 756 GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ 757 *.zip*) \ 758 unzip $(distdir).zip ;;\ 759 esac 760 chmod -R a-w $(distdir) 761 chmod u+w $(distdir) 762 mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst 763 chmod a-w $(distdir) 764 test -d $(distdir)/_build || exit 0; \ 765 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ 766 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ 767 && am__cwd=`pwd` \ 768 && $(am__cd) $(distdir)/_build/sub \ 769 && ../../configure \ 770 $(AM_DISTCHECK_CONFIGURE_FLAGS) \ 771 $(DISTCHECK_CONFIGURE_FLAGS) \ 772 --srcdir=../.. --prefix="$$dc_install_base" \ 773 && $(MAKE) $(AM_MAKEFLAGS) \ 774 && $(MAKE) $(AM_MAKEFLAGS) dvi \ 775 && $(MAKE) $(AM_MAKEFLAGS) check \ 776 && $(MAKE) $(AM_MAKEFLAGS) install \ 777 && $(MAKE) $(AM_MAKEFLAGS) installcheck \ 778 && $(MAKE) $(AM_MAKEFLAGS) uninstall \ 779 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ 780 distuninstallcheck \ 781 && chmod -R a-w "$$dc_install_base" \ 782 && ({ \ 783 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ 784 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ 785 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ 786 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ 787 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ 788 } || { rm -rf "$$dc_destdir"; exit 1; }) \ 789 && rm -rf "$$dc_destdir" \ 790 && $(MAKE) $(AM_MAKEFLAGS) dist \ 791 && rm -rf $(DIST_ARCHIVES) \ 792 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ 793 && cd "$$am__cwd" \ 794 || exit 1 795 $(am__post_remove_distdir) 796 @(echo "$(distdir) archives ready for distribution: "; \ 797 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ 798 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' 799distuninstallcheck: 800 @test -n '$(distuninstallcheck_dir)' || { \ 801 echo 'ERROR: trying to run $@ with an empty' \ 802 '$$(distuninstallcheck_dir)' >&2; \ 803 exit 1; \ 804 }; \ 805 $(am__cd) '$(distuninstallcheck_dir)' || { \ 806 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ 807 exit 1; \ 808 }; \ 809 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ 810 || { echo "ERROR: files left after uninstall:" ; \ 811 if test -n "$(DESTDIR)"; then \ 812 echo " (check DESTDIR support)"; \ 813 fi ; \ 814 $(distuninstallcheck_listfiles) ; \ 815 exit 1; } >&2 816distcleancheck: distclean 817 @if test '$(srcdir)' = . ; then \ 818 echo "ERROR: distcleancheck can only run from a VPATH build" ; \ 819 exit 1 ; \ 820 fi 821 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ 822 || { echo "ERROR: files left in build directory after distclean:" ; \ 823 $(distcleancheck_listfiles) ; \ 824 exit 1; } >&2 825check-am: all-am 826check: check-recursive 827all-am: Makefile $(DATA) 828installdirs: installdirs-recursive 829installdirs-am: 830 for dir in "$(DESTDIR)$(docdir)"; do \ 831 test -z "$$dir" || $(MKDIR_P) "$$dir"; \ 832 done 833install: install-recursive 834install-exec: install-exec-recursive 835install-data: install-data-recursive 836uninstall: uninstall-recursive 837 838install-am: all-am 839 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 840 841installcheck: installcheck-recursive 842install-strip: 843 if test -z '$(STRIP)'; then \ 844 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 845 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 846 install; \ 847 else \ 848 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 849 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 850 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 851 fi 852mostlyclean-generic: 853 854clean-generic: 855 856distclean-generic: 857 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 858 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 859 860maintainer-clean-generic: 861 @echo "This command is intended for maintainers to use" 862 @echo "it deletes files that may require special tools to rebuild." 863clean: clean-recursive 864 865clean-am: clean-generic clean-libtool mostlyclean-am 866 867distclean: distclean-recursive 868 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 869 -rm -f Makefile 870distclean-am: clean-am distclean-generic distclean-libtool \ 871 distclean-tags 872 873dvi: dvi-recursive 874 875dvi-am: 876 877html: html-recursive 878 879html-am: 880 881info: info-recursive 882 883info-am: 884 885install-data-am: install-dist_docDATA 886 887install-dvi: install-dvi-recursive 888 889install-dvi-am: 890 891install-exec-am: 892 @$(NORMAL_INSTALL) 893 $(MAKE) $(AM_MAKEFLAGS) install-exec-hook 894install-html: install-html-recursive 895 896install-html-am: 897 898install-info: install-info-recursive 899 900install-info-am: 901 902install-man: 903 904install-pdf: install-pdf-recursive 905 906install-pdf-am: 907 908install-ps: install-ps-recursive 909 910install-ps-am: 911 912installcheck-am: 913 914maintainer-clean: maintainer-clean-recursive 915 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 916 -rm -rf $(top_srcdir)/autom4te.cache 917 -rm -f Makefile 918maintainer-clean-am: distclean-am maintainer-clean-generic 919 920mostlyclean: mostlyclean-recursive 921 922mostlyclean-am: mostlyclean-generic mostlyclean-libtool 923 924pdf: pdf-recursive 925 926pdf-am: 927 928ps: ps-recursive 929 930ps-am: 931 932uninstall-am: uninstall-dist_docDATA 933 934.MAKE: $(am__recursive_targets) install-am install-exec-am \ 935 install-strip 936 937.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ 938 am--refresh check check-am clean clean-cscope clean-generic \ 939 clean-libtool cscope cscopelist-am ctags ctags-am dist \ 940 dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \ 941 dist-xz dist-zip distcheck distclean distclean-generic \ 942 distclean-libtool distclean-tags distcleancheck distdir \ 943 distuninstallcheck dvi dvi-am html html-am info info-am \ 944 install install-am install-data install-data-am \ 945 install-dist_docDATA install-dvi install-dvi-am install-exec \ 946 install-exec-am install-exec-hook install-html install-html-am \ 947 install-info install-info-am install-man install-pdf \ 948 install-pdf-am install-ps install-ps-am install-strip \ 949 installcheck installcheck-am installdirs installdirs-am \ 950 maintainer-clean maintainer-clean-generic mostlyclean \ 951 mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ 952 tags tags-am uninstall uninstall-am uninstall-dist_docDATA 953 954.PRECIOUS: Makefile 955 956 957# Create the ChangeLog, but only if we're inside a git working directory 958 959ChangeLog: $(srcdir)/tools/git2cl 960 if [ -d $(srcdir)/.git ] ; then \ 961 $(srcdir)/tools/git2cl > $@ \ 962 ; fi 963 964indent: 965 cd src && $(MAKE) $(AM_MAKEFLAGS) indent 966 967install-exec-hook: 968 cd $(DESTDIR)$(bindir) && \ 969 $(LN_S) -f flex$(EXEEXT) flex++$(EXEEXT) 970 971.PHONY: ChangeLog indent 972 973# Tell versions [3.59,3.63) of GNU make to not export all variables. 974# Otherwise a system limit (for SysV at least) may be exceeded. 975.NOEXPORT: 976