1 /******************************************************************************
2 *
3 * Module Name: cmclib - Local implementation of C library functions
4 *
5 *****************************************************************************/
6
7 /*
8 * Copyright (C) 2000 - 2014, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44 #include "acpi.h"
45 #include "accommon.h"
46
47 /*
48 * These implementations of standard C Library routines can optionally be
49 * used if a C library is not available. In general, they are less efficient
50 * than an inline or assembly implementation
51 */
52
53 #define _COMPONENT ACPI_UTILITIES
54 ACPI_MODULE_NAME ("cmclib")
55
56
57 #ifndef ACPI_USE_SYSTEM_CLIBRARY
58
59 #define NEGATIVE 1
60 #define POSITIVE 0
61
62
63 /*******************************************************************************
64 *
65 * FUNCTION: AcpiUtMemcmp (memcmp)
66 *
67 * PARAMETERS: Buffer1 - First Buffer
68 * Buffer2 - Second Buffer
69 * Count - Maximum # of bytes to compare
70 *
71 * RETURN: Index where Buffers mismatched, or 0 if Buffers matched
72 *
73 * DESCRIPTION: Compare two Buffers, with a maximum length
74 *
75 ******************************************************************************/
76
77 int
AcpiUtMemcmp(const char * Buffer1,const char * Buffer2,ACPI_SIZE Count)78 AcpiUtMemcmp (
79 const char *Buffer1,
80 const char *Buffer2,
81 ACPI_SIZE Count)
82 {
83
84 for ( ; Count-- && (*Buffer1 == *Buffer2); Buffer1++, Buffer2++)
85 {
86 }
87
88 return ((Count == ACPI_SIZE_MAX) ? 0 : ((unsigned char) *Buffer1 -
89 (unsigned char) *Buffer2));
90 }
91
92
93 /*******************************************************************************
94 *
95 * FUNCTION: AcpiUtMemcpy (memcpy)
96 *
97 * PARAMETERS: Dest - Target of the copy
98 * Src - Source buffer to copy
99 * Count - Number of bytes to copy
100 *
101 * RETURN: Dest
102 *
103 * DESCRIPTION: Copy arbitrary bytes of memory
104 *
105 ******************************************************************************/
106
107 void *
AcpiUtMemcpy(void * Dest,const void * Src,ACPI_SIZE Count)108 AcpiUtMemcpy (
109 void *Dest,
110 const void *Src,
111 ACPI_SIZE Count)
112 {
113 char *New = (char *) Dest;
114 char *Old = (char *) Src;
115
116
117 while (Count)
118 {
119 *New = *Old;
120 New++;
121 Old++;
122 Count--;
123 }
124
125 return (Dest);
126 }
127
128
129 /*******************************************************************************
130 *
131 * FUNCTION: AcpiUtMemset (memset)
132 *
133 * PARAMETERS: Dest - Buffer to set
134 * Value - Value to set each byte of memory
135 * Count - Number of bytes to set
136 *
137 * RETURN: Dest
138 *
139 * DESCRIPTION: Initialize a buffer to a known value.
140 *
141 ******************************************************************************/
142
143 void *
AcpiUtMemset(void * Dest,UINT8 Value,ACPI_SIZE Count)144 AcpiUtMemset (
145 void *Dest,
146 UINT8 Value,
147 ACPI_SIZE Count)
148 {
149 char *New = (char *) Dest;
150
151
152 while (Count)
153 {
154 *New = (char) Value;
155 New++;
156 Count--;
157 }
158
159 return (Dest);
160 }
161
162
163 /*******************************************************************************
164 *
165 * FUNCTION: AcpiUtStrlen (strlen)
166 *
167 * PARAMETERS: String - Null terminated string
168 *
169 * RETURN: Length
170 *
171 * DESCRIPTION: Returns the length of the input string
172 *
173 ******************************************************************************/
174
175
176 ACPI_SIZE
AcpiUtStrlen(const char * String)177 AcpiUtStrlen (
178 const char *String)
179 {
180 UINT32 Length = 0;
181
182
183 /* Count the string until a null is encountered */
184
185 while (*String)
186 {
187 Length++;
188 String++;
189 }
190
191 return (Length);
192 }
193
194
195 /*******************************************************************************
196 *
197 * FUNCTION: AcpiUtStrcpy (strcpy)
198 *
199 * PARAMETERS: DstString - Target of the copy
200 * SrcString - The source string to copy
201 *
202 * RETURN: DstString
203 *
204 * DESCRIPTION: Copy a null terminated string
205 *
206 ******************************************************************************/
207
208 char *
AcpiUtStrcpy(char * DstString,const char * SrcString)209 AcpiUtStrcpy (
210 char *DstString,
211 const char *SrcString)
212 {
213 char *String = DstString;
214
215
216 /* Move bytes brute force */
217
218 while (*SrcString)
219 {
220 *String = *SrcString;
221
222 String++;
223 SrcString++;
224 }
225
226 /* Null terminate */
227
228 *String = 0;
229 return (DstString);
230 }
231
232
233 /*******************************************************************************
234 *
235 * FUNCTION: AcpiUtStrncpy (strncpy)
236 *
237 * PARAMETERS: DstString - Target of the copy
238 * SrcString - The source string to copy
239 * Count - Maximum # of bytes to copy
240 *
241 * RETURN: DstString
242 *
243 * DESCRIPTION: Copy a null terminated string, with a maximum length
244 *
245 ******************************************************************************/
246
247 char *
AcpiUtStrncpy(char * DstString,const char * SrcString,ACPI_SIZE Count)248 AcpiUtStrncpy (
249 char *DstString,
250 const char *SrcString,
251 ACPI_SIZE Count)
252 {
253 char *String = DstString;
254
255
256 /* Copy the string */
257
258 for (String = DstString;
259 Count && (Count--, (*String++ = *SrcString++)); )
260 {;}
261
262 /* Pad with nulls if necessary */
263
264 while (Count--)
265 {
266 *String = 0;
267 String++;
268 }
269
270 /* Return original pointer */
271
272 return (DstString);
273 }
274
275
276 /*******************************************************************************
277 *
278 * FUNCTION: AcpiUtStrcmp (strcmp)
279 *
280 * PARAMETERS: String1 - First string
281 * String2 - Second string
282 *
283 * RETURN: Index where strings mismatched, or 0 if strings matched
284 *
285 * DESCRIPTION: Compare two null terminated strings
286 *
287 ******************************************************************************/
288
289 int
AcpiUtStrcmp(const char * String1,const char * String2)290 AcpiUtStrcmp (
291 const char *String1,
292 const char *String2)
293 {
294
295
296 for ( ; (*String1 == *String2); String2++)
297 {
298 if (!*String1++)
299 {
300 return (0);
301 }
302 }
303
304 return ((unsigned char) *String1 - (unsigned char) *String2);
305 }
306
307
308 /*******************************************************************************
309 *
310 * FUNCTION: AcpiUtStrchr (strchr)
311 *
312 * PARAMETERS: String - Search string
313 * ch - character to search for
314 *
315 * RETURN: Ptr to char or NULL if not found
316 *
317 * DESCRIPTION: Search a string for a character
318 *
319 ******************************************************************************/
320
321 char *
AcpiUtStrchr(const char * String,int ch)322 AcpiUtStrchr (
323 const char *String,
324 int ch)
325 {
326
327
328 for ( ; (*String); String++)
329 {
330 if ((*String) == (char) ch)
331 {
332 return ((char *) String);
333 }
334 }
335
336 return (NULL);
337 }
338
339
340 /*******************************************************************************
341 *
342 * FUNCTION: AcpiUtStrncmp (strncmp)
343 *
344 * PARAMETERS: String1 - First string
345 * String2 - Second string
346 * Count - Maximum # of bytes to compare
347 *
348 * RETURN: Index where strings mismatched, or 0 if strings matched
349 *
350 * DESCRIPTION: Compare two null terminated strings, with a maximum length
351 *
352 ******************************************************************************/
353
354 int
AcpiUtStrncmp(const char * String1,const char * String2,ACPI_SIZE Count)355 AcpiUtStrncmp (
356 const char *String1,
357 const char *String2,
358 ACPI_SIZE Count)
359 {
360
361
362 for ( ; Count-- && (*String1 == *String2); String2++)
363 {
364 if (!*String1++)
365 {
366 return (0);
367 }
368 }
369
370 return ((Count == ACPI_SIZE_MAX) ? 0 : ((unsigned char) *String1 -
371 (unsigned char) *String2));
372 }
373
374
375 /*******************************************************************************
376 *
377 * FUNCTION: AcpiUtStrcat (Strcat)
378 *
379 * PARAMETERS: DstString - Target of the copy
380 * SrcString - The source string to copy
381 *
382 * RETURN: DstString
383 *
384 * DESCRIPTION: Append a null terminated string to a null terminated string
385 *
386 ******************************************************************************/
387
388 char *
AcpiUtStrcat(char * DstString,const char * SrcString)389 AcpiUtStrcat (
390 char *DstString,
391 const char *SrcString)
392 {
393 char *String;
394
395
396 /* Find end of the destination string */
397
398 for (String = DstString; *String++; )
399 { ; }
400
401 /* Concatenate the string */
402
403 for (--String; (*String++ = *SrcString++); )
404 { ; }
405
406 return (DstString);
407 }
408
409
410 /*******************************************************************************
411 *
412 * FUNCTION: AcpiUtStrncat (strncat)
413 *
414 * PARAMETERS: DstString - Target of the copy
415 * SrcString - The source string to copy
416 * Count - Maximum # of bytes to copy
417 *
418 * RETURN: DstString
419 *
420 * DESCRIPTION: Append a null terminated string to a null terminated string,
421 * with a maximum count.
422 *
423 ******************************************************************************/
424
425 char *
AcpiUtStrncat(char * DstString,const char * SrcString,ACPI_SIZE Count)426 AcpiUtStrncat (
427 char *DstString,
428 const char *SrcString,
429 ACPI_SIZE Count)
430 {
431 char *String;
432
433
434 if (Count)
435 {
436 /* Find end of the destination string */
437
438 for (String = DstString; *String++; )
439 { ; }
440
441 /* Concatenate the string */
442
443 for (--String; (*String++ = *SrcString++) && --Count; )
444 { ; }
445
446 /* Null terminate if necessary */
447
448 if (!Count)
449 {
450 *String = 0;
451 }
452 }
453
454 return (DstString);
455 }
456
457
458 /*******************************************************************************
459 *
460 * FUNCTION: AcpiUtStrstr (strstr)
461 *
462 * PARAMETERS: String1 - Target string
463 * String2 - Substring to search for
464 *
465 * RETURN: Where substring match starts, Null if no match found
466 *
467 * DESCRIPTION: Checks if String2 occurs in String1. This is not really a
468 * full implementation of strstr, only sufficient for command
469 * matching
470 *
471 ******************************************************************************/
472
473 char *
AcpiUtStrstr(char * String1,char * String2)474 AcpiUtStrstr (
475 char *String1,
476 char *String2)
477 {
478 char *String;
479
480
481 if (AcpiUtStrlen (String2) > AcpiUtStrlen (String1))
482 {
483 return (NULL);
484 }
485
486 /* Walk entire string, comparing the letters */
487
488 for (String = String1; *String2; )
489 {
490 if (*String2 != *String)
491 {
492 return (NULL);
493 }
494
495 String2++;
496 String++;
497 }
498
499 return (String1);
500 }
501
502
503 /*******************************************************************************
504 *
505 * FUNCTION: AcpiUtStrtoul (strtoul)
506 *
507 * PARAMETERS: String - Null terminated string
508 * Terminater - Where a pointer to the terminating byte is
509 * returned
510 * Base - Radix of the string
511 *
512 * RETURN: Converted value
513 *
514 * DESCRIPTION: Convert a string into a 32-bit unsigned value.
515 * Note: use AcpiUtStrtoul64 for 64-bit integers.
516 *
517 ******************************************************************************/
518
519 UINT32
AcpiUtStrtoul(const char * String,char ** Terminator,UINT32 Base)520 AcpiUtStrtoul (
521 const char *String,
522 char **Terminator,
523 UINT32 Base)
524 {
525 UINT32 converted = 0;
526 UINT32 index;
527 UINT32 sign;
528 const char *StringStart;
529 UINT32 ReturnValue = 0;
530 ACPI_STATUS Status = AE_OK;
531
532
533 /*
534 * Save the value of the pointer to the buffer's first
535 * character, save the current errno value, and then
536 * skip over any white space in the buffer:
537 */
538 StringStart = String;
539 while (ACPI_IS_SPACE (*String) || *String == '\t')
540 {
541 ++String;
542 }
543
544 /*
545 * The buffer may contain an optional plus or minus sign.
546 * If it does, then skip over it but remember what is was:
547 */
548 if (*String == '-')
549 {
550 sign = NEGATIVE;
551 ++String;
552 }
553 else if (*String == '+')
554 {
555 ++String;
556 sign = POSITIVE;
557 }
558 else
559 {
560 sign = POSITIVE;
561 }
562
563 /*
564 * If the input parameter Base is zero, then we need to
565 * determine if it is octal, decimal, or hexadecimal:
566 */
567 if (Base == 0)
568 {
569 if (*String == '0')
570 {
571 if (AcpiUtToLower (*(++String)) == 'x')
572 {
573 Base = 16;
574 ++String;
575 }
576 else
577 {
578 Base = 8;
579 }
580 }
581 else
582 {
583 Base = 10;
584 }
585 }
586 else if (Base < 2 || Base > 36)
587 {
588 /*
589 * The specified Base parameter is not in the domain of
590 * this function:
591 */
592 goto done;
593 }
594
595 /*
596 * For octal and hexadecimal bases, skip over the leading
597 * 0 or 0x, if they are present.
598 */
599 if (Base == 8 && *String == '0')
600 {
601 String++;
602 }
603
604 if (Base == 16 &&
605 *String == '0' &&
606 AcpiUtToLower (*(++String)) == 'x')
607 {
608 String++;
609 }
610
611 /*
612 * Main loop: convert the string to an unsigned long:
613 */
614 while (*String)
615 {
616 if (ACPI_IS_DIGIT (*String))
617 {
618 index = (UINT32) ((UINT8) *String - '0');
619 }
620 else
621 {
622 index = (UINT32) AcpiUtToUpper (*String);
623 if (ACPI_IS_UPPER (index))
624 {
625 index = index - 'A' + 10;
626 }
627 else
628 {
629 goto done;
630 }
631 }
632
633 if (index >= Base)
634 {
635 goto done;
636 }
637
638 /*
639 * Check to see if value is out of range:
640 */
641
642 if (ReturnValue > ((ACPI_UINT32_MAX - (UINT32) index) /
643 (UINT32) Base))
644 {
645 Status = AE_ERROR;
646 ReturnValue = 0; /* reset */
647 }
648 else
649 {
650 ReturnValue *= Base;
651 ReturnValue += index;
652 converted = 1;
653 }
654
655 ++String;
656 }
657
658 done:
659 /*
660 * If appropriate, update the caller's pointer to the next
661 * unconverted character in the buffer.
662 */
663 if (Terminator)
664 {
665 if (converted == 0 && ReturnValue == 0 && String != NULL)
666 {
667 *Terminator = (char *) StringStart;
668 }
669 else
670 {
671 *Terminator = (char *) String;
672 }
673 }
674
675 if (Status == AE_ERROR)
676 {
677 ReturnValue = ACPI_UINT32_MAX;
678 }
679
680 /*
681 * If a minus sign was present, then "the conversion is negated":
682 */
683 if (sign == NEGATIVE)
684 {
685 ReturnValue = (ACPI_UINT32_MAX - ReturnValue) + 1;
686 }
687
688 return (ReturnValue);
689 }
690
691
692 /*******************************************************************************
693 *
694 * FUNCTION: AcpiUtToUpper (TOUPPER)
695 *
696 * PARAMETERS: c - Character to convert
697 *
698 * RETURN: Converted character as an int
699 *
700 * DESCRIPTION: Convert character to uppercase
701 *
702 ******************************************************************************/
703
704 int
AcpiUtToUpper(int c)705 AcpiUtToUpper (
706 int c)
707 {
708
709 return (ACPI_IS_LOWER(c) ? ((c)-0x20) : (c));
710 }
711
712
713 /*******************************************************************************
714 *
715 * FUNCTION: AcpiUtToLower (TOLOWER)
716 *
717 * PARAMETERS: c - Character to convert
718 *
719 * RETURN: Converted character as an int
720 *
721 * DESCRIPTION: Convert character to lowercase
722 *
723 ******************************************************************************/
724
725 int
AcpiUtToLower(int c)726 AcpiUtToLower (
727 int c)
728 {
729
730 return (ACPI_IS_UPPER(c) ? ((c)+0x20) : (c));
731 }
732
733
734 /*******************************************************************************
735 *
736 * FUNCTION: is* functions
737 *
738 * DESCRIPTION: is* functions use the ctype table below
739 *
740 ******************************************************************************/
741
742 const UINT8 _acpi_ctype[257] = {
743 _ACPI_CN, /* 0x00 0 NUL */
744 _ACPI_CN, /* 0x01 1 SOH */
745 _ACPI_CN, /* 0x02 2 STX */
746 _ACPI_CN, /* 0x03 3 ETX */
747 _ACPI_CN, /* 0x04 4 EOT */
748 _ACPI_CN, /* 0x05 5 ENQ */
749 _ACPI_CN, /* 0x06 6 ACK */
750 _ACPI_CN, /* 0x07 7 BEL */
751 _ACPI_CN, /* 0x08 8 BS */
752 _ACPI_CN|_ACPI_SP, /* 0x09 9 TAB */
753 _ACPI_CN|_ACPI_SP, /* 0x0A 10 LF */
754 _ACPI_CN|_ACPI_SP, /* 0x0B 11 VT */
755 _ACPI_CN|_ACPI_SP, /* 0x0C 12 FF */
756 _ACPI_CN|_ACPI_SP, /* 0x0D 13 CR */
757 _ACPI_CN, /* 0x0E 14 SO */
758 _ACPI_CN, /* 0x0F 15 SI */
759 _ACPI_CN, /* 0x10 16 DLE */
760 _ACPI_CN, /* 0x11 17 DC1 */
761 _ACPI_CN, /* 0x12 18 DC2 */
762 _ACPI_CN, /* 0x13 19 DC3 */
763 _ACPI_CN, /* 0x14 20 DC4 */
764 _ACPI_CN, /* 0x15 21 NAK */
765 _ACPI_CN, /* 0x16 22 SYN */
766 _ACPI_CN, /* 0x17 23 ETB */
767 _ACPI_CN, /* 0x18 24 CAN */
768 _ACPI_CN, /* 0x19 25 EM */
769 _ACPI_CN, /* 0x1A 26 SUB */
770 _ACPI_CN, /* 0x1B 27 ESC */
771 _ACPI_CN, /* 0x1C 28 FS */
772 _ACPI_CN, /* 0x1D 29 GS */
773 _ACPI_CN, /* 0x1E 30 RS */
774 _ACPI_CN, /* 0x1F 31 US */
775 _ACPI_XS|_ACPI_SP, /* 0x20 32 ' ' */
776 _ACPI_PU, /* 0x21 33 '!' */
777 _ACPI_PU, /* 0x22 34 '"' */
778 _ACPI_PU, /* 0x23 35 '#' */
779 _ACPI_PU, /* 0x24 36 '$' */
780 _ACPI_PU, /* 0x25 37 '%' */
781 _ACPI_PU, /* 0x26 38 '&' */
782 _ACPI_PU, /* 0x27 39 ''' */
783 _ACPI_PU, /* 0x28 40 '(' */
784 _ACPI_PU, /* 0x29 41 ')' */
785 _ACPI_PU, /* 0x2A 42 '*' */
786 _ACPI_PU, /* 0x2B 43 '+' */
787 _ACPI_PU, /* 0x2C 44 ',' */
788 _ACPI_PU, /* 0x2D 45 '-' */
789 _ACPI_PU, /* 0x2E 46 '.' */
790 _ACPI_PU, /* 0x2F 47 '/' */
791 _ACPI_XD|_ACPI_DI, /* 0x30 48 '0' */
792 _ACPI_XD|_ACPI_DI, /* 0x31 49 '1' */
793 _ACPI_XD|_ACPI_DI, /* 0x32 50 '2' */
794 _ACPI_XD|_ACPI_DI, /* 0x33 51 '3' */
795 _ACPI_XD|_ACPI_DI, /* 0x34 52 '4' */
796 _ACPI_XD|_ACPI_DI, /* 0x35 53 '5' */
797 _ACPI_XD|_ACPI_DI, /* 0x36 54 '6' */
798 _ACPI_XD|_ACPI_DI, /* 0x37 55 '7' */
799 _ACPI_XD|_ACPI_DI, /* 0x38 56 '8' */
800 _ACPI_XD|_ACPI_DI, /* 0x39 57 '9' */
801 _ACPI_PU, /* 0x3A 58 ':' */
802 _ACPI_PU, /* 0x3B 59 ';' */
803 _ACPI_PU, /* 0x3C 60 '<' */
804 _ACPI_PU, /* 0x3D 61 '=' */
805 _ACPI_PU, /* 0x3E 62 '>' */
806 _ACPI_PU, /* 0x3F 63 '?' */
807 _ACPI_PU, /* 0x40 64 '@' */
808 _ACPI_XD|_ACPI_UP, /* 0x41 65 'A' */
809 _ACPI_XD|_ACPI_UP, /* 0x42 66 'B' */
810 _ACPI_XD|_ACPI_UP, /* 0x43 67 'C' */
811 _ACPI_XD|_ACPI_UP, /* 0x44 68 'D' */
812 _ACPI_XD|_ACPI_UP, /* 0x45 69 'E' */
813 _ACPI_XD|_ACPI_UP, /* 0x46 70 'F' */
814 _ACPI_UP, /* 0x47 71 'G' */
815 _ACPI_UP, /* 0x48 72 'H' */
816 _ACPI_UP, /* 0x49 73 'I' */
817 _ACPI_UP, /* 0x4A 74 'J' */
818 _ACPI_UP, /* 0x4B 75 'K' */
819 _ACPI_UP, /* 0x4C 76 'L' */
820 _ACPI_UP, /* 0x4D 77 'M' */
821 _ACPI_UP, /* 0x4E 78 'N' */
822 _ACPI_UP, /* 0x4F 79 'O' */
823 _ACPI_UP, /* 0x50 80 'P' */
824 _ACPI_UP, /* 0x51 81 'Q' */
825 _ACPI_UP, /* 0x52 82 'R' */
826 _ACPI_UP, /* 0x53 83 'S' */
827 _ACPI_UP, /* 0x54 84 'T' */
828 _ACPI_UP, /* 0x55 85 'U' */
829 _ACPI_UP, /* 0x56 86 'V' */
830 _ACPI_UP, /* 0x57 87 'W' */
831 _ACPI_UP, /* 0x58 88 'X' */
832 _ACPI_UP, /* 0x59 89 'Y' */
833 _ACPI_UP, /* 0x5A 90 'Z' */
834 _ACPI_PU, /* 0x5B 91 '[' */
835 _ACPI_PU, /* 0x5C 92 '\' */
836 _ACPI_PU, /* 0x5D 93 ']' */
837 _ACPI_PU, /* 0x5E 94 '^' */
838 _ACPI_PU, /* 0x5F 95 '_' */
839 _ACPI_PU, /* 0x60 96 '`' */
840 _ACPI_XD|_ACPI_LO, /* 0x61 97 'a' */
841 _ACPI_XD|_ACPI_LO, /* 0x62 98 'b' */
842 _ACPI_XD|_ACPI_LO, /* 0x63 99 'c' */
843 _ACPI_XD|_ACPI_LO, /* 0x64 100 'd' */
844 _ACPI_XD|_ACPI_LO, /* 0x65 101 'e' */
845 _ACPI_XD|_ACPI_LO, /* 0x66 102 'f' */
846 _ACPI_LO, /* 0x67 103 'g' */
847 _ACPI_LO, /* 0x68 104 'h' */
848 _ACPI_LO, /* 0x69 105 'i' */
849 _ACPI_LO, /* 0x6A 106 'j' */
850 _ACPI_LO, /* 0x6B 107 'k' */
851 _ACPI_LO, /* 0x6C 108 'l' */
852 _ACPI_LO, /* 0x6D 109 'm' */
853 _ACPI_LO, /* 0x6E 110 'n' */
854 _ACPI_LO, /* 0x6F 111 'o' */
855 _ACPI_LO, /* 0x70 112 'p' */
856 _ACPI_LO, /* 0x71 113 'q' */
857 _ACPI_LO, /* 0x72 114 'r' */
858 _ACPI_LO, /* 0x73 115 's' */
859 _ACPI_LO, /* 0x74 116 't' */
860 _ACPI_LO, /* 0x75 117 'u' */
861 _ACPI_LO, /* 0x76 118 'v' */
862 _ACPI_LO, /* 0x77 119 'w' */
863 _ACPI_LO, /* 0x78 120 'x' */
864 _ACPI_LO, /* 0x79 121 'y' */
865 _ACPI_LO, /* 0x7A 122 'z' */
866 _ACPI_PU, /* 0x7B 123 '{' */
867 _ACPI_PU, /* 0x7C 124 '|' */
868 _ACPI_PU, /* 0x7D 125 '}' */
869 _ACPI_PU, /* 0x7E 126 '~' */
870 _ACPI_CN, /* 0x7F 127 DEL */
871
872 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 0x80 to 0x8F */
873 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 0x90 to 0x9F */
874 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 0xA0 to 0xAF */
875 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 0xB0 to 0xBF */
876 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 0xC0 to 0xCF */
877 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 0xD0 to 0xDF */
878 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 0xE0 to 0xEF */
879 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 0xF0 to 0xFF */
880 0 /* 0x100 */
881 };
882
883
884 #endif /* ACPI_USE_SYSTEM_CLIBRARY */
885