1 /* SPDX-License-Identifier: BSD-3-Clause 2 * Copyright 2018 Mellanox Technologies, Ltd 3 */ 4 5 #include <unistd.h> 6 7 #include <rte_errno.h> 8 #include <rte_malloc.h> 9 #include <rte_eal_paging.h> 10 11 #include "mlx5_prm.h" 12 #include "mlx5_devx_cmds.h" 13 #include "mlx5_common_log.h" 14 #include "mlx5_malloc.h" 15 16 /** 17 * Perform read access to the registers. Reads data from register 18 * and writes ones to the specified buffer. 19 * 20 * @param[in] ctx 21 * Context returned from mlx5 open_device() glue function. 22 * @param[in] reg_id 23 * Register identifier according to the PRM. 24 * @param[in] arg 25 * Register access auxiliary parameter according to the PRM. 26 * @param[out] data 27 * Pointer to the buffer to store read data. 28 * @param[in] dw_cnt 29 * Buffer size in double words. 30 * 31 * @return 32 * 0 on success, a negative value otherwise. 33 */ 34 int 35 mlx5_devx_cmd_register_read(void *ctx, uint16_t reg_id, uint32_t arg, 36 uint32_t *data, uint32_t dw_cnt) 37 { 38 uint32_t in[MLX5_ST_SZ_DW(access_register_in)] = {0}; 39 uint32_t out[MLX5_ST_SZ_DW(access_register_out) + 40 MLX5_ACCESS_REGISTER_DATA_DWORD_MAX] = {0}; 41 int status, rc; 42 43 MLX5_ASSERT(data && dw_cnt); 44 MLX5_ASSERT(dw_cnt <= MLX5_ACCESS_REGISTER_DATA_DWORD_MAX); 45 if (dw_cnt > MLX5_ACCESS_REGISTER_DATA_DWORD_MAX) { 46 DRV_LOG(ERR, "Not enough buffer for register read data"); 47 return -1; 48 } 49 MLX5_SET(access_register_in, in, opcode, 50 MLX5_CMD_OP_ACCESS_REGISTER_USER); 51 MLX5_SET(access_register_in, in, op_mod, 52 MLX5_ACCESS_REGISTER_IN_OP_MOD_READ); 53 MLX5_SET(access_register_in, in, register_id, reg_id); 54 MLX5_SET(access_register_in, in, argument, arg); 55 rc = mlx5_glue->devx_general_cmd(ctx, in, sizeof(in), out, 56 MLX5_ST_SZ_BYTES(access_register_out) + 57 sizeof(uint32_t) * dw_cnt); 58 if (rc) 59 goto error; 60 status = MLX5_GET(access_register_out, out, status); 61 if (status) { 62 int syndrome = MLX5_GET(access_register_out, out, syndrome); 63 64 DRV_LOG(DEBUG, "Failed to read access NIC register 0x%X, " 65 "status %x, syndrome = %x", 66 reg_id, status, syndrome); 67 return -1; 68 } 69 memcpy(data, &out[MLX5_ST_SZ_DW(access_register_out)], 70 dw_cnt * sizeof(uint32_t)); 71 return 0; 72 error: 73 rc = (rc > 0) ? -rc : rc; 74 return rc; 75 } 76 77 /** 78 * Perform write access to the registers. 79 * 80 * @param[in] ctx 81 * Context returned from mlx5 open_device() glue function. 82 * @param[in] reg_id 83 * Register identifier according to the PRM. 84 * @param[in] arg 85 * Register access auxiliary parameter according to the PRM. 86 * @param[out] data 87 * Pointer to the buffer containing data to write. 88 * @param[in] dw_cnt 89 * Buffer size in double words (32bit units). 90 * 91 * @return 92 * 0 on success, a negative value otherwise. 93 */ 94 int 95 mlx5_devx_cmd_register_write(void *ctx, uint16_t reg_id, uint32_t arg, 96 uint32_t *data, uint32_t dw_cnt) 97 { 98 uint32_t in[MLX5_ST_SZ_DW(access_register_in) + 99 MLX5_ACCESS_REGISTER_DATA_DWORD_MAX] = {0}; 100 uint32_t out[MLX5_ST_SZ_DW(access_register_out)] = {0}; 101 int status, rc; 102 void *ptr; 103 104 MLX5_ASSERT(data && dw_cnt); 105 MLX5_ASSERT(dw_cnt <= MLX5_ACCESS_REGISTER_DATA_DWORD_MAX); 106 if (dw_cnt > MLX5_ACCESS_REGISTER_DATA_DWORD_MAX) { 107 DRV_LOG(ERR, "Data to write exceeds max size"); 108 return -1; 109 } 110 MLX5_SET(access_register_in, in, opcode, 111 MLX5_CMD_OP_ACCESS_REGISTER_USER); 112 MLX5_SET(access_register_in, in, op_mod, 113 MLX5_ACCESS_REGISTER_IN_OP_MOD_WRITE); 114 MLX5_SET(access_register_in, in, register_id, reg_id); 115 MLX5_SET(access_register_in, in, argument, arg); 116 ptr = MLX5_ADDR_OF(access_register_in, in, register_data); 117 memcpy(ptr, data, dw_cnt * sizeof(uint32_t)); 118 rc = mlx5_glue->devx_general_cmd(ctx, in, sizeof(in), out, sizeof(out)); 119 120 rc = mlx5_glue->devx_general_cmd(ctx, in, 121 MLX5_ST_SZ_BYTES(access_register_in) + 122 dw_cnt * sizeof(uint32_t), 123 out, sizeof(out)); 124 if (rc) 125 goto error; 126 status = MLX5_GET(access_register_out, out, status); 127 if (status) { 128 int syndrome = MLX5_GET(access_register_out, out, syndrome); 129 130 DRV_LOG(DEBUG, "Failed to write access NIC register 0x%X, " 131 "status %x, syndrome = %x", 132 reg_id, status, syndrome); 133 return -1; 134 } 135 return 0; 136 error: 137 rc = (rc > 0) ? -rc : rc; 138 return rc; 139 } 140 141 /** 142 * Allocate flow counters via devx interface. 143 * 144 * @param[in] ctx 145 * Context returned from mlx5 open_device() glue function. 146 * @param dcs 147 * Pointer to counters properties structure to be filled by the routine. 148 * @param bulk_n_128 149 * Bulk counter numbers in 128 counters units. 150 * 151 * @return 152 * Pointer to counter object on success, a negative value otherwise and 153 * rte_errno is set. 154 */ 155 struct mlx5_devx_obj * 156 mlx5_devx_cmd_flow_counter_alloc(void *ctx, uint32_t bulk_n_128) 157 { 158 struct mlx5_devx_obj *dcs = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*dcs), 159 0, SOCKET_ID_ANY); 160 uint32_t in[MLX5_ST_SZ_DW(alloc_flow_counter_in)] = {0}; 161 uint32_t out[MLX5_ST_SZ_DW(alloc_flow_counter_out)] = {0}; 162 163 if (!dcs) { 164 rte_errno = ENOMEM; 165 return NULL; 166 } 167 MLX5_SET(alloc_flow_counter_in, in, opcode, 168 MLX5_CMD_OP_ALLOC_FLOW_COUNTER); 169 MLX5_SET(alloc_flow_counter_in, in, flow_counter_bulk, bulk_n_128); 170 dcs->obj = mlx5_glue->devx_obj_create(ctx, in, 171 sizeof(in), out, sizeof(out)); 172 if (!dcs->obj) { 173 DRV_LOG(ERR, "Can't allocate counters - error %d", errno); 174 rte_errno = errno; 175 mlx5_free(dcs); 176 return NULL; 177 } 178 dcs->id = MLX5_GET(alloc_flow_counter_out, out, flow_counter_id); 179 return dcs; 180 } 181 182 /** 183 * Query flow counters values. 184 * 185 * @param[in] dcs 186 * devx object that was obtained from mlx5_devx_cmd_fc_alloc. 187 * @param[in] clear 188 * Whether hardware should clear the counters after the query or not. 189 * @param[in] n_counters 190 * 0 in case of 1 counter to read, otherwise the counter number to read. 191 * @param pkts 192 * The number of packets that matched the flow. 193 * @param bytes 194 * The number of bytes that matched the flow. 195 * @param mkey 196 * The mkey key for batch query. 197 * @param addr 198 * The address in the mkey range for batch query. 199 * @param cmd_comp 200 * The completion object for asynchronous batch query. 201 * @param async_id 202 * The ID to be returned in the asynchronous batch query response. 203 * 204 * @return 205 * 0 on success, a negative value otherwise. 206 */ 207 int 208 mlx5_devx_cmd_flow_counter_query(struct mlx5_devx_obj *dcs, 209 int clear, uint32_t n_counters, 210 uint64_t *pkts, uint64_t *bytes, 211 uint32_t mkey, void *addr, 212 void *cmd_comp, 213 uint64_t async_id) 214 { 215 int out_len = MLX5_ST_SZ_BYTES(query_flow_counter_out) + 216 MLX5_ST_SZ_BYTES(traffic_counter); 217 uint32_t out[out_len]; 218 uint32_t in[MLX5_ST_SZ_DW(query_flow_counter_in)] = {0}; 219 void *stats; 220 int rc; 221 222 MLX5_SET(query_flow_counter_in, in, opcode, 223 MLX5_CMD_OP_QUERY_FLOW_COUNTER); 224 MLX5_SET(query_flow_counter_in, in, op_mod, 0); 225 MLX5_SET(query_flow_counter_in, in, flow_counter_id, dcs->id); 226 MLX5_SET(query_flow_counter_in, in, clear, !!clear); 227 228 if (n_counters) { 229 MLX5_SET(query_flow_counter_in, in, num_of_counters, 230 n_counters); 231 MLX5_SET(query_flow_counter_in, in, dump_to_memory, 1); 232 MLX5_SET(query_flow_counter_in, in, mkey, mkey); 233 MLX5_SET64(query_flow_counter_in, in, address, 234 (uint64_t)(uintptr_t)addr); 235 } 236 if (!cmd_comp) 237 rc = mlx5_glue->devx_obj_query(dcs->obj, in, sizeof(in), out, 238 out_len); 239 else 240 rc = mlx5_glue->devx_obj_query_async(dcs->obj, in, sizeof(in), 241 out_len, async_id, 242 cmd_comp); 243 if (rc) { 244 DRV_LOG(ERR, "Failed to query devx counters with rc %d", rc); 245 rte_errno = rc; 246 return -rc; 247 } 248 if (!n_counters) { 249 stats = MLX5_ADDR_OF(query_flow_counter_out, 250 out, flow_statistics); 251 *pkts = MLX5_GET64(traffic_counter, stats, packets); 252 *bytes = MLX5_GET64(traffic_counter, stats, octets); 253 } 254 return 0; 255 } 256 257 /** 258 * Create a new mkey. 259 * 260 * @param[in] ctx 261 * Context returned from mlx5 open_device() glue function. 262 * @param[in] attr 263 * Attributes of the requested mkey. 264 * 265 * @return 266 * Pointer to Devx mkey on success, a negative value otherwise and rte_errno 267 * is set. 268 */ 269 struct mlx5_devx_obj * 270 mlx5_devx_cmd_mkey_create(void *ctx, 271 struct mlx5_devx_mkey_attr *attr) 272 { 273 struct mlx5_klm *klm_array = attr->klm_array; 274 int klm_num = attr->klm_num; 275 int in_size_dw = MLX5_ST_SZ_DW(create_mkey_in) + 276 (klm_num ? RTE_ALIGN(klm_num, 4) : 0) * MLX5_ST_SZ_DW(klm); 277 uint32_t in[in_size_dw]; 278 uint32_t out[MLX5_ST_SZ_DW(create_mkey_out)] = {0}; 279 void *mkc; 280 struct mlx5_devx_obj *mkey = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*mkey), 281 0, SOCKET_ID_ANY); 282 size_t pgsize; 283 uint32_t translation_size; 284 285 if (!mkey) { 286 rte_errno = ENOMEM; 287 return NULL; 288 } 289 memset(in, 0, in_size_dw * 4); 290 pgsize = rte_mem_page_size(); 291 if (pgsize == (size_t)-1) { 292 mlx5_free(mkey); 293 DRV_LOG(ERR, "Failed to get page size"); 294 rte_errno = ENOMEM; 295 return NULL; 296 } 297 MLX5_SET(create_mkey_in, in, opcode, MLX5_CMD_OP_CREATE_MKEY); 298 mkc = MLX5_ADDR_OF(create_mkey_in, in, memory_key_mkey_entry); 299 if (klm_num > 0) { 300 int i; 301 uint8_t *klm = (uint8_t *)MLX5_ADDR_OF(create_mkey_in, in, 302 klm_pas_mtt); 303 translation_size = RTE_ALIGN(klm_num, 4); 304 for (i = 0; i < klm_num; i++) { 305 MLX5_SET(klm, klm, byte_count, klm_array[i].byte_count); 306 MLX5_SET(klm, klm, mkey, klm_array[i].mkey); 307 MLX5_SET64(klm, klm, address, klm_array[i].address); 308 klm += MLX5_ST_SZ_BYTES(klm); 309 } 310 for (; i < (int)translation_size; i++) { 311 MLX5_SET(klm, klm, mkey, 0x0); 312 MLX5_SET64(klm, klm, address, 0x0); 313 klm += MLX5_ST_SZ_BYTES(klm); 314 } 315 MLX5_SET(mkc, mkc, access_mode_1_0, attr->log_entity_size ? 316 MLX5_MKC_ACCESS_MODE_KLM_FBS : 317 MLX5_MKC_ACCESS_MODE_KLM); 318 MLX5_SET(mkc, mkc, log_page_size, attr->log_entity_size); 319 } else { 320 translation_size = (RTE_ALIGN(attr->size, pgsize) * 8) / 16; 321 MLX5_SET(mkc, mkc, access_mode_1_0, MLX5_MKC_ACCESS_MODE_MTT); 322 MLX5_SET(mkc, mkc, log_page_size, rte_log2_u32(pgsize)); 323 } 324 MLX5_SET(create_mkey_in, in, translations_octword_actual_size, 325 translation_size); 326 MLX5_SET(create_mkey_in, in, mkey_umem_id, attr->umem_id); 327 MLX5_SET(create_mkey_in, in, pg_access, attr->pg_access); 328 MLX5_SET(mkc, mkc, lw, 0x1); 329 MLX5_SET(mkc, mkc, lr, 0x1); 330 if (attr->set_remote_rw) { 331 MLX5_SET(mkc, mkc, rw, 0x1); 332 MLX5_SET(mkc, mkc, rr, 0x1); 333 } 334 MLX5_SET(mkc, mkc, qpn, 0xffffff); 335 MLX5_SET(mkc, mkc, pd, attr->pd); 336 MLX5_SET(mkc, mkc, mkey_7_0, attr->umem_id & 0xFF); 337 MLX5_SET(mkc, mkc, umr_en, attr->umr_en); 338 MLX5_SET(mkc, mkc, translations_octword_size, translation_size); 339 MLX5_SET(mkc, mkc, relaxed_ordering_write, 340 attr->relaxed_ordering_write); 341 MLX5_SET(mkc, mkc, relaxed_ordering_read, attr->relaxed_ordering_read); 342 MLX5_SET64(mkc, mkc, start_addr, attr->addr); 343 MLX5_SET64(mkc, mkc, len, attr->size); 344 MLX5_SET(mkc, mkc, crypto_en, attr->crypto_en); 345 if (attr->crypto_en) { 346 MLX5_SET(mkc, mkc, bsf_en, attr->crypto_en); 347 MLX5_SET(mkc, mkc, bsf_octword_size, 4); 348 } 349 mkey->obj = mlx5_glue->devx_obj_create(ctx, in, in_size_dw * 4, out, 350 sizeof(out)); 351 if (!mkey->obj) { 352 DRV_LOG(ERR, "Can't create %sdirect mkey - error %d", 353 klm_num ? "an in" : "a ", errno); 354 rte_errno = errno; 355 mlx5_free(mkey); 356 return NULL; 357 } 358 mkey->id = MLX5_GET(create_mkey_out, out, mkey_index); 359 mkey->id = (mkey->id << 8) | (attr->umem_id & 0xFF); 360 return mkey; 361 } 362 363 /** 364 * Get status of devx command response. 365 * Mainly used for asynchronous commands. 366 * 367 * @param[in] out 368 * The out response buffer. 369 * 370 * @return 371 * 0 on success, non-zero value otherwise. 372 */ 373 int 374 mlx5_devx_get_out_command_status(void *out) 375 { 376 int status; 377 378 if (!out) 379 return -EINVAL; 380 status = MLX5_GET(query_flow_counter_out, out, status); 381 if (status) { 382 int syndrome = MLX5_GET(query_flow_counter_out, out, syndrome); 383 384 DRV_LOG(ERR, "Bad DevX status %x, syndrome = %x", status, 385 syndrome); 386 } 387 return status; 388 } 389 390 /** 391 * Destroy any object allocated by a Devx API. 392 * 393 * @param[in] obj 394 * Pointer to a general object. 395 * 396 * @return 397 * 0 on success, a negative value otherwise. 398 */ 399 int 400 mlx5_devx_cmd_destroy(struct mlx5_devx_obj *obj) 401 { 402 int ret; 403 404 if (!obj) 405 return 0; 406 ret = mlx5_glue->devx_obj_destroy(obj->obj); 407 mlx5_free(obj); 408 return ret; 409 } 410 411 /** 412 * Query NIC vport context. 413 * Fills minimal inline attribute. 414 * 415 * @param[in] ctx 416 * ibv contexts returned from mlx5dv_open_device. 417 * @param[in] vport 418 * vport index 419 * @param[out] attr 420 * Attributes device values. 421 * 422 * @return 423 * 0 on success, a negative value otherwise. 424 */ 425 static int 426 mlx5_devx_cmd_query_nic_vport_context(void *ctx, 427 unsigned int vport, 428 struct mlx5_hca_attr *attr) 429 { 430 uint32_t in[MLX5_ST_SZ_DW(query_nic_vport_context_in)] = {0}; 431 uint32_t out[MLX5_ST_SZ_DW(query_nic_vport_context_out)] = {0}; 432 void *vctx; 433 int status, syndrome, rc; 434 435 /* Query NIC vport context to determine inline mode. */ 436 MLX5_SET(query_nic_vport_context_in, in, opcode, 437 MLX5_CMD_OP_QUERY_NIC_VPORT_CONTEXT); 438 MLX5_SET(query_nic_vport_context_in, in, vport_number, vport); 439 if (vport) 440 MLX5_SET(query_nic_vport_context_in, in, other_vport, 1); 441 rc = mlx5_glue->devx_general_cmd(ctx, 442 in, sizeof(in), 443 out, sizeof(out)); 444 if (rc) 445 goto error; 446 status = MLX5_GET(query_nic_vport_context_out, out, status); 447 syndrome = MLX5_GET(query_nic_vport_context_out, out, syndrome); 448 if (status) { 449 DRV_LOG(DEBUG, "Failed to query NIC vport context, " 450 "status %x, syndrome = %x", status, syndrome); 451 return -1; 452 } 453 vctx = MLX5_ADDR_OF(query_nic_vport_context_out, out, 454 nic_vport_context); 455 attr->vport_inline_mode = MLX5_GET(nic_vport_context, vctx, 456 min_wqe_inline_mode); 457 return 0; 458 error: 459 rc = (rc > 0) ? -rc : rc; 460 return rc; 461 } 462 463 /** 464 * Query NIC vDPA attributes. 465 * 466 * @param[in] ctx 467 * Context returned from mlx5 open_device() glue function. 468 * @param[out] vdpa_attr 469 * vDPA Attributes structure to fill. 470 */ 471 static void 472 mlx5_devx_cmd_query_hca_vdpa_attr(void *ctx, 473 struct mlx5_hca_vdpa_attr *vdpa_attr) 474 { 475 uint32_t in[MLX5_ST_SZ_DW(query_hca_cap_in)] = {0}; 476 uint32_t out[MLX5_ST_SZ_DW(query_hca_cap_out)] = {0}; 477 void *hcattr = MLX5_ADDR_OF(query_hca_cap_out, out, capability); 478 int status, syndrome, rc; 479 480 MLX5_SET(query_hca_cap_in, in, opcode, MLX5_CMD_OP_QUERY_HCA_CAP); 481 MLX5_SET(query_hca_cap_in, in, op_mod, 482 MLX5_GET_HCA_CAP_OP_MOD_VDPA_EMULATION | 483 MLX5_HCA_CAP_OPMOD_GET_CUR); 484 rc = mlx5_glue->devx_general_cmd(ctx, in, sizeof(in), out, sizeof(out)); 485 status = MLX5_GET(query_hca_cap_out, out, status); 486 syndrome = MLX5_GET(query_hca_cap_out, out, syndrome); 487 if (rc || status) { 488 RTE_LOG(DEBUG, PMD, "Failed to query devx VDPA capabilities," 489 " status %x, syndrome = %x", status, syndrome); 490 vdpa_attr->valid = 0; 491 } else { 492 vdpa_attr->valid = 1; 493 vdpa_attr->desc_tunnel_offload_type = 494 MLX5_GET(virtio_emulation_cap, hcattr, 495 desc_tunnel_offload_type); 496 vdpa_attr->eth_frame_offload_type = 497 MLX5_GET(virtio_emulation_cap, hcattr, 498 eth_frame_offload_type); 499 vdpa_attr->virtio_version_1_0 = 500 MLX5_GET(virtio_emulation_cap, hcattr, 501 virtio_version_1_0); 502 vdpa_attr->tso_ipv4 = MLX5_GET(virtio_emulation_cap, hcattr, 503 tso_ipv4); 504 vdpa_attr->tso_ipv6 = MLX5_GET(virtio_emulation_cap, hcattr, 505 tso_ipv6); 506 vdpa_attr->tx_csum = MLX5_GET(virtio_emulation_cap, hcattr, 507 tx_csum); 508 vdpa_attr->rx_csum = MLX5_GET(virtio_emulation_cap, hcattr, 509 rx_csum); 510 vdpa_attr->event_mode = MLX5_GET(virtio_emulation_cap, hcattr, 511 event_mode); 512 vdpa_attr->virtio_queue_type = 513 MLX5_GET(virtio_emulation_cap, hcattr, 514 virtio_queue_type); 515 vdpa_attr->log_doorbell_stride = 516 MLX5_GET(virtio_emulation_cap, hcattr, 517 log_doorbell_stride); 518 vdpa_attr->log_doorbell_bar_size = 519 MLX5_GET(virtio_emulation_cap, hcattr, 520 log_doorbell_bar_size); 521 vdpa_attr->doorbell_bar_offset = 522 MLX5_GET64(virtio_emulation_cap, hcattr, 523 doorbell_bar_offset); 524 vdpa_attr->max_num_virtio_queues = 525 MLX5_GET(virtio_emulation_cap, hcattr, 526 max_num_virtio_queues); 527 vdpa_attr->umems[0].a = MLX5_GET(virtio_emulation_cap, hcattr, 528 umem_1_buffer_param_a); 529 vdpa_attr->umems[0].b = MLX5_GET(virtio_emulation_cap, hcattr, 530 umem_1_buffer_param_b); 531 vdpa_attr->umems[1].a = MLX5_GET(virtio_emulation_cap, hcattr, 532 umem_2_buffer_param_a); 533 vdpa_attr->umems[1].b = MLX5_GET(virtio_emulation_cap, hcattr, 534 umem_2_buffer_param_b); 535 vdpa_attr->umems[2].a = MLX5_GET(virtio_emulation_cap, hcattr, 536 umem_3_buffer_param_a); 537 vdpa_attr->umems[2].b = MLX5_GET(virtio_emulation_cap, hcattr, 538 umem_3_buffer_param_b); 539 } 540 } 541 542 int 543 mlx5_devx_cmd_query_parse_samples(struct mlx5_devx_obj *flex_obj, 544 uint32_t ids[], uint32_t num) 545 { 546 uint32_t in[MLX5_ST_SZ_DW(general_obj_in_cmd_hdr)] = {0}; 547 uint32_t out[MLX5_ST_SZ_DW(create_flex_parser_out)] = {0}; 548 void *hdr = MLX5_ADDR_OF(create_flex_parser_out, in, hdr); 549 void *flex = MLX5_ADDR_OF(create_flex_parser_out, out, flex); 550 void *sample = MLX5_ADDR_OF(parse_graph_flex, flex, sample_table); 551 int ret; 552 uint32_t idx = 0; 553 uint32_t i; 554 555 if (num > MLX5_GRAPH_NODE_SAMPLE_NUM) { 556 rte_errno = EINVAL; 557 DRV_LOG(ERR, "Too many sample IDs to be fetched."); 558 return -rte_errno; 559 } 560 MLX5_SET(general_obj_in_cmd_hdr, hdr, opcode, 561 MLX5_CMD_OP_QUERY_GENERAL_OBJECT); 562 MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_type, 563 MLX5_GENERAL_OBJ_TYPE_FLEX_PARSE_GRAPH); 564 MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_id, flex_obj->id); 565 ret = mlx5_glue->devx_obj_query(flex_obj->obj, in, sizeof(in), 566 out, sizeof(out)); 567 if (ret) { 568 rte_errno = ret; 569 DRV_LOG(ERR, "Failed to query sample IDs with object %p.", 570 (void *)flex_obj); 571 return -rte_errno; 572 } 573 for (i = 0; i < MLX5_GRAPH_NODE_SAMPLE_NUM; i++) { 574 void *s_off = (void *)((char *)sample + i * 575 MLX5_ST_SZ_BYTES(parse_graph_flow_match_sample)); 576 uint32_t en; 577 578 en = MLX5_GET(parse_graph_flow_match_sample, s_off, 579 flow_match_sample_en); 580 if (!en) 581 continue; 582 ids[idx++] = MLX5_GET(parse_graph_flow_match_sample, s_off, 583 flow_match_sample_field_id); 584 } 585 if (num != idx) { 586 rte_errno = EINVAL; 587 DRV_LOG(ERR, "Number of sample IDs are not as expected."); 588 return -rte_errno; 589 } 590 return ret; 591 } 592 593 594 struct mlx5_devx_obj * 595 mlx5_devx_cmd_create_flex_parser(void *ctx, 596 struct mlx5_devx_graph_node_attr *data) 597 { 598 uint32_t in[MLX5_ST_SZ_DW(create_flex_parser_in)] = {0}; 599 uint32_t out[MLX5_ST_SZ_DW(general_obj_out_cmd_hdr)] = {0}; 600 void *hdr = MLX5_ADDR_OF(create_flex_parser_in, in, hdr); 601 void *flex = MLX5_ADDR_OF(create_flex_parser_in, in, flex); 602 void *sample = MLX5_ADDR_OF(parse_graph_flex, flex, sample_table); 603 void *in_arc = MLX5_ADDR_OF(parse_graph_flex, flex, input_arc); 604 void *out_arc = MLX5_ADDR_OF(parse_graph_flex, flex, output_arc); 605 struct mlx5_devx_obj *parse_flex_obj = mlx5_malloc 606 (MLX5_MEM_ZERO, sizeof(*parse_flex_obj), 0, SOCKET_ID_ANY); 607 uint32_t i; 608 609 if (!parse_flex_obj) { 610 DRV_LOG(ERR, "Failed to allocate flex parser data."); 611 rte_errno = ENOMEM; 612 return NULL; 613 } 614 MLX5_SET(general_obj_in_cmd_hdr, hdr, opcode, 615 MLX5_CMD_OP_CREATE_GENERAL_OBJECT); 616 MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_type, 617 MLX5_GENERAL_OBJ_TYPE_FLEX_PARSE_GRAPH); 618 MLX5_SET(parse_graph_flex, flex, header_length_mode, 619 data->header_length_mode); 620 MLX5_SET(parse_graph_flex, flex, header_length_base_value, 621 data->header_length_base_value); 622 MLX5_SET(parse_graph_flex, flex, header_length_field_offset, 623 data->header_length_field_offset); 624 MLX5_SET(parse_graph_flex, flex, header_length_field_shift, 625 data->header_length_field_shift); 626 MLX5_SET(parse_graph_flex, flex, header_length_field_mask, 627 data->header_length_field_mask); 628 for (i = 0; i < MLX5_GRAPH_NODE_SAMPLE_NUM; i++) { 629 struct mlx5_devx_match_sample_attr *s = &data->sample[i]; 630 void *s_off = (void *)((char *)sample + i * 631 MLX5_ST_SZ_BYTES(parse_graph_flow_match_sample)); 632 633 if (!s->flow_match_sample_en) 634 continue; 635 MLX5_SET(parse_graph_flow_match_sample, s_off, 636 flow_match_sample_en, !!s->flow_match_sample_en); 637 MLX5_SET(parse_graph_flow_match_sample, s_off, 638 flow_match_sample_field_offset, 639 s->flow_match_sample_field_offset); 640 MLX5_SET(parse_graph_flow_match_sample, s_off, 641 flow_match_sample_offset_mode, 642 s->flow_match_sample_offset_mode); 643 MLX5_SET(parse_graph_flow_match_sample, s_off, 644 flow_match_sample_field_offset_mask, 645 s->flow_match_sample_field_offset_mask); 646 MLX5_SET(parse_graph_flow_match_sample, s_off, 647 flow_match_sample_field_offset_shift, 648 s->flow_match_sample_field_offset_shift); 649 MLX5_SET(parse_graph_flow_match_sample, s_off, 650 flow_match_sample_field_base_offset, 651 s->flow_match_sample_field_base_offset); 652 MLX5_SET(parse_graph_flow_match_sample, s_off, 653 flow_match_sample_tunnel_mode, 654 s->flow_match_sample_tunnel_mode); 655 } 656 for (i = 0; i < MLX5_GRAPH_NODE_ARC_NUM; i++) { 657 struct mlx5_devx_graph_arc_attr *ia = &data->in[i]; 658 struct mlx5_devx_graph_arc_attr *oa = &data->out[i]; 659 void *in_off = (void *)((char *)in_arc + i * 660 MLX5_ST_SZ_BYTES(parse_graph_arc)); 661 void *out_off = (void *)((char *)out_arc + i * 662 MLX5_ST_SZ_BYTES(parse_graph_arc)); 663 664 if (ia->arc_parse_graph_node != 0) { 665 MLX5_SET(parse_graph_arc, in_off, 666 compare_condition_value, 667 ia->compare_condition_value); 668 MLX5_SET(parse_graph_arc, in_off, start_inner_tunnel, 669 ia->start_inner_tunnel); 670 MLX5_SET(parse_graph_arc, in_off, arc_parse_graph_node, 671 ia->arc_parse_graph_node); 672 MLX5_SET(parse_graph_arc, in_off, 673 parse_graph_node_handle, 674 ia->parse_graph_node_handle); 675 } 676 if (oa->arc_parse_graph_node != 0) { 677 MLX5_SET(parse_graph_arc, out_off, 678 compare_condition_value, 679 oa->compare_condition_value); 680 MLX5_SET(parse_graph_arc, out_off, start_inner_tunnel, 681 oa->start_inner_tunnel); 682 MLX5_SET(parse_graph_arc, out_off, arc_parse_graph_node, 683 oa->arc_parse_graph_node); 684 MLX5_SET(parse_graph_arc, out_off, 685 parse_graph_node_handle, 686 oa->parse_graph_node_handle); 687 } 688 } 689 parse_flex_obj->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), 690 out, sizeof(out)); 691 if (!parse_flex_obj->obj) { 692 rte_errno = errno; 693 DRV_LOG(ERR, "Failed to create FLEX PARSE GRAPH object " 694 "by using DevX."); 695 mlx5_free(parse_flex_obj); 696 return NULL; 697 } 698 parse_flex_obj->id = MLX5_GET(general_obj_out_cmd_hdr, out, obj_id); 699 return parse_flex_obj; 700 } 701 702 static int 703 mlx5_devx_query_pkt_integrity_match(void *hcattr) 704 { 705 return MLX5_GET(flow_table_nic_cap, hcattr, 706 ft_field_support_2_nic_receive.inner_l3_ok) && 707 MLX5_GET(flow_table_nic_cap, hcattr, 708 ft_field_support_2_nic_receive.inner_l4_ok) && 709 MLX5_GET(flow_table_nic_cap, hcattr, 710 ft_field_support_2_nic_receive.outer_l3_ok) && 711 MLX5_GET(flow_table_nic_cap, hcattr, 712 ft_field_support_2_nic_receive.outer_l4_ok) && 713 MLX5_GET(flow_table_nic_cap, hcattr, 714 ft_field_support_2_nic_receive 715 .inner_ipv4_checksum_ok) && 716 MLX5_GET(flow_table_nic_cap, hcattr, 717 ft_field_support_2_nic_receive.inner_l4_checksum_ok) && 718 MLX5_GET(flow_table_nic_cap, hcattr, 719 ft_field_support_2_nic_receive 720 .outer_ipv4_checksum_ok) && 721 MLX5_GET(flow_table_nic_cap, hcattr, 722 ft_field_support_2_nic_receive.outer_l4_checksum_ok); 723 } 724 725 /** 726 * Query HCA attributes. 727 * Using those attributes we can check on run time if the device 728 * is having the required capabilities. 729 * 730 * @param[in] ctx 731 * Context returned from mlx5 open_device() glue function. 732 * @param[out] attr 733 * Attributes device values. 734 * 735 * @return 736 * 0 on success, a negative value otherwise. 737 */ 738 int 739 mlx5_devx_cmd_query_hca_attr(void *ctx, 740 struct mlx5_hca_attr *attr) 741 { 742 uint32_t in[MLX5_ST_SZ_DW(query_hca_cap_in)] = {0}; 743 uint32_t out[MLX5_ST_SZ_DW(query_hca_cap_out)] = {0}; 744 void *hcattr; 745 int status, syndrome, rc, i; 746 uint64_t general_obj_types_supported = 0; 747 748 MLX5_SET(query_hca_cap_in, in, opcode, MLX5_CMD_OP_QUERY_HCA_CAP); 749 MLX5_SET(query_hca_cap_in, in, op_mod, 750 MLX5_GET_HCA_CAP_OP_MOD_GENERAL_DEVICE | 751 MLX5_HCA_CAP_OPMOD_GET_CUR); 752 753 rc = mlx5_glue->devx_general_cmd(ctx, 754 in, sizeof(in), out, sizeof(out)); 755 if (rc) 756 goto error; 757 status = MLX5_GET(query_hca_cap_out, out, status); 758 syndrome = MLX5_GET(query_hca_cap_out, out, syndrome); 759 if (status) { 760 DRV_LOG(DEBUG, "Failed to query devx HCA capabilities, " 761 "status %x, syndrome = %x", status, syndrome); 762 return -1; 763 } 764 hcattr = MLX5_ADDR_OF(query_hca_cap_out, out, capability); 765 attr->flow_counter_bulk_alloc_bitmap = 766 MLX5_GET(cmd_hca_cap, hcattr, flow_counter_bulk_alloc); 767 attr->flow_counters_dump = MLX5_GET(cmd_hca_cap, hcattr, 768 flow_counters_dump); 769 attr->log_max_rqt_size = MLX5_GET(cmd_hca_cap, hcattr, 770 log_max_rqt_size); 771 attr->eswitch_manager = MLX5_GET(cmd_hca_cap, hcattr, eswitch_manager); 772 attr->hairpin = MLX5_GET(cmd_hca_cap, hcattr, hairpin); 773 attr->log_max_hairpin_queues = MLX5_GET(cmd_hca_cap, hcattr, 774 log_max_hairpin_queues); 775 attr->log_max_hairpin_wq_data_sz = MLX5_GET(cmd_hca_cap, hcattr, 776 log_max_hairpin_wq_data_sz); 777 attr->log_max_hairpin_num_packets = MLX5_GET 778 (cmd_hca_cap, hcattr, log_min_hairpin_wq_data_sz); 779 attr->vhca_id = MLX5_GET(cmd_hca_cap, hcattr, vhca_id); 780 attr->relaxed_ordering_write = MLX5_GET(cmd_hca_cap, hcattr, 781 relaxed_ordering_write); 782 attr->relaxed_ordering_read = MLX5_GET(cmd_hca_cap, hcattr, 783 relaxed_ordering_read); 784 attr->access_register_user = MLX5_GET(cmd_hca_cap, hcattr, 785 access_register_user); 786 attr->eth_net_offloads = MLX5_GET(cmd_hca_cap, hcattr, 787 eth_net_offloads); 788 attr->eth_virt = MLX5_GET(cmd_hca_cap, hcattr, eth_virt); 789 attr->flex_parser_protocols = MLX5_GET(cmd_hca_cap, hcattr, 790 flex_parser_protocols); 791 attr->max_geneve_tlv_options = MLX5_GET(cmd_hca_cap, hcattr, 792 max_geneve_tlv_options); 793 attr->max_geneve_tlv_option_data_len = MLX5_GET(cmd_hca_cap, hcattr, 794 max_geneve_tlv_option_data_len); 795 attr->qos.sup = MLX5_GET(cmd_hca_cap, hcattr, qos); 796 attr->qos.flow_meter_aso_sup = !!(MLX5_GET64(cmd_hca_cap, hcattr, 797 general_obj_types) & 798 MLX5_GENERAL_OBJ_TYPES_CAP_FLOW_METER_ASO); 799 attr->vdpa.valid = !!(MLX5_GET64(cmd_hca_cap, hcattr, 800 general_obj_types) & 801 MLX5_GENERAL_OBJ_TYPES_CAP_VIRTQ_NET_Q); 802 attr->vdpa.queue_counters_valid = !!(MLX5_GET64(cmd_hca_cap, hcattr, 803 general_obj_types) & 804 MLX5_GENERAL_OBJ_TYPES_CAP_VIRTIO_Q_COUNTERS); 805 attr->parse_graph_flex_node = !!(MLX5_GET64(cmd_hca_cap, hcattr, 806 general_obj_types) & 807 MLX5_GENERAL_OBJ_TYPES_CAP_PARSE_GRAPH_FLEX_NODE); 808 attr->wqe_index_ignore = MLX5_GET(cmd_hca_cap, hcattr, 809 wqe_index_ignore_cap); 810 attr->cross_channel = MLX5_GET(cmd_hca_cap, hcattr, cd); 811 attr->non_wire_sq = MLX5_GET(cmd_hca_cap, hcattr, non_wire_sq); 812 attr->log_max_static_sq_wq = MLX5_GET(cmd_hca_cap, hcattr, 813 log_max_static_sq_wq); 814 attr->num_lag_ports = MLX5_GET(cmd_hca_cap, hcattr, num_lag_ports); 815 attr->dev_freq_khz = MLX5_GET(cmd_hca_cap, hcattr, 816 device_frequency_khz); 817 attr->scatter_fcs_w_decap_disable = 818 MLX5_GET(cmd_hca_cap, hcattr, scatter_fcs_w_decap_disable); 819 attr->roce = MLX5_GET(cmd_hca_cap, hcattr, roce); 820 attr->rq_ts_format = MLX5_GET(cmd_hca_cap, hcattr, rq_ts_format); 821 attr->sq_ts_format = MLX5_GET(cmd_hca_cap, hcattr, sq_ts_format); 822 attr->regex = MLX5_GET(cmd_hca_cap, hcattr, regexp); 823 attr->regexp_num_of_engines = MLX5_GET(cmd_hca_cap, hcattr, 824 regexp_num_of_engines); 825 /* Read the general_obj_types bitmap and extract the relevant bits. */ 826 general_obj_types_supported = MLX5_GET64(cmd_hca_cap, hcattr, 827 general_obj_types); 828 attr->vdpa.valid = !!(general_obj_types_supported & 829 MLX5_GENERAL_OBJ_TYPES_CAP_VIRTQ_NET_Q); 830 attr->vdpa.queue_counters_valid = 831 !!(general_obj_types_supported & 832 MLX5_GENERAL_OBJ_TYPES_CAP_VIRTIO_Q_COUNTERS); 833 attr->parse_graph_flex_node = 834 !!(general_obj_types_supported & 835 MLX5_GENERAL_OBJ_TYPES_CAP_PARSE_GRAPH_FLEX_NODE); 836 attr->flow_hit_aso = !!(general_obj_types_supported & 837 MLX5_GENERAL_OBJ_TYPES_CAP_FLOW_HIT_ASO); 838 attr->geneve_tlv_opt = !!(general_obj_types_supported & 839 MLX5_GENERAL_OBJ_TYPES_CAP_GENEVE_TLV_OPT); 840 attr->dek = !!(general_obj_types_supported & 841 MLX5_GENERAL_OBJ_TYPES_CAP_DEK); 842 attr->import_kek = !!(general_obj_types_supported & 843 MLX5_GENERAL_OBJ_TYPES_CAP_IMPORT_KEK); 844 attr->credential = !!(general_obj_types_supported & 845 MLX5_GENERAL_OBJ_TYPES_CAP_CREDENTIAL); 846 attr->crypto_login = !!(general_obj_types_supported & 847 MLX5_GENERAL_OBJ_TYPES_CAP_CRYPTO_LOGIN); 848 /* Add reading of other GENERAL_OBJ_TYPES_CAP bits above this line. */ 849 attr->log_max_cq = MLX5_GET(cmd_hca_cap, hcattr, log_max_cq); 850 attr->log_max_qp = MLX5_GET(cmd_hca_cap, hcattr, log_max_qp); 851 attr->log_max_cq_sz = MLX5_GET(cmd_hca_cap, hcattr, log_max_cq_sz); 852 attr->log_max_qp_sz = MLX5_GET(cmd_hca_cap, hcattr, log_max_qp_sz); 853 attr->log_max_mrw_sz = MLX5_GET(cmd_hca_cap, hcattr, log_max_mrw_sz); 854 attr->log_max_pd = MLX5_GET(cmd_hca_cap, hcattr, log_max_pd); 855 attr->log_max_srq = MLX5_GET(cmd_hca_cap, hcattr, log_max_srq); 856 attr->log_max_srq_sz = MLX5_GET(cmd_hca_cap, hcattr, log_max_srq_sz); 857 attr->reg_c_preserve = 858 MLX5_GET(cmd_hca_cap, hcattr, reg_c_preserve); 859 attr->mmo_dma_en = MLX5_GET(cmd_hca_cap, hcattr, dma_mmo); 860 attr->mmo_compress_en = MLX5_GET(cmd_hca_cap, hcattr, compress); 861 attr->mmo_decompress_en = MLX5_GET(cmd_hca_cap, hcattr, decompress); 862 attr->compress_min_block_size = MLX5_GET(cmd_hca_cap, hcattr, 863 compress_min_block_size); 864 attr->log_max_mmo_dma = MLX5_GET(cmd_hca_cap, hcattr, log_dma_mmo_size); 865 attr->log_max_mmo_compress = MLX5_GET(cmd_hca_cap, hcattr, 866 log_compress_mmo_size); 867 attr->log_max_mmo_decompress = MLX5_GET(cmd_hca_cap, hcattr, 868 log_decompress_mmo_size); 869 attr->cqe_compression = MLX5_GET(cmd_hca_cap, hcattr, cqe_compression); 870 attr->mini_cqe_resp_flow_tag = MLX5_GET(cmd_hca_cap, hcattr, 871 mini_cqe_resp_flow_tag); 872 attr->mini_cqe_resp_l3_l4_tag = MLX5_GET(cmd_hca_cap, hcattr, 873 mini_cqe_resp_l3_l4_tag); 874 attr->umr_indirect_mkey_disabled = 875 MLX5_GET(cmd_hca_cap, hcattr, umr_indirect_mkey_disabled); 876 attr->umr_modify_entity_size_disabled = 877 MLX5_GET(cmd_hca_cap, hcattr, umr_modify_entity_size_disabled); 878 attr->crypto = MLX5_GET(cmd_hca_cap, hcattr, crypto); 879 if (attr->crypto) 880 attr->aes_xts = MLX5_GET(cmd_hca_cap, hcattr, aes_xts); 881 attr->ct_offload = !!(MLX5_GET64(cmd_hca_cap, hcattr, 882 general_obj_types) & 883 MLX5_GENERAL_OBJ_TYPES_CAP_CONN_TRACK_OFFLOAD); 884 if (attr->qos.sup) { 885 MLX5_SET(query_hca_cap_in, in, op_mod, 886 MLX5_GET_HCA_CAP_OP_MOD_QOS_CAP | 887 MLX5_HCA_CAP_OPMOD_GET_CUR); 888 rc = mlx5_glue->devx_general_cmd(ctx, in, sizeof(in), 889 out, sizeof(out)); 890 if (rc) 891 goto error; 892 if (status) { 893 DRV_LOG(DEBUG, "Failed to query devx QOS capabilities," 894 " status %x, syndrome = %x", status, syndrome); 895 return -1; 896 } 897 hcattr = MLX5_ADDR_OF(query_hca_cap_out, out, capability); 898 attr->qos.flow_meter_old = 899 MLX5_GET(qos_cap, hcattr, flow_meter_old); 900 attr->qos.log_max_flow_meter = 901 MLX5_GET(qos_cap, hcattr, log_max_flow_meter); 902 attr->qos.flow_meter_reg_c_ids = 903 MLX5_GET(qos_cap, hcattr, flow_meter_reg_id); 904 attr->qos.flow_meter = 905 MLX5_GET(qos_cap, hcattr, flow_meter); 906 attr->qos.packet_pacing = 907 MLX5_GET(qos_cap, hcattr, packet_pacing); 908 attr->qos.wqe_rate_pp = 909 MLX5_GET(qos_cap, hcattr, wqe_rate_pp); 910 if (attr->qos.flow_meter_aso_sup) { 911 attr->qos.log_meter_aso_granularity = 912 MLX5_GET(qos_cap, hcattr, 913 log_meter_aso_granularity); 914 attr->qos.log_meter_aso_max_alloc = 915 MLX5_GET(qos_cap, hcattr, 916 log_meter_aso_max_alloc); 917 attr->qos.log_max_num_meter_aso = 918 MLX5_GET(qos_cap, hcattr, 919 log_max_num_meter_aso); 920 } 921 } 922 if (attr->vdpa.valid) 923 mlx5_devx_cmd_query_hca_vdpa_attr(ctx, &attr->vdpa); 924 if (!attr->eth_net_offloads) 925 return 0; 926 927 /* Query Flow Sampler Capability From FLow Table Properties Layout. */ 928 memset(in, 0, sizeof(in)); 929 memset(out, 0, sizeof(out)); 930 MLX5_SET(query_hca_cap_in, in, opcode, MLX5_CMD_OP_QUERY_HCA_CAP); 931 MLX5_SET(query_hca_cap_in, in, op_mod, 932 MLX5_GET_HCA_CAP_OP_MOD_NIC_FLOW_TABLE | 933 MLX5_HCA_CAP_OPMOD_GET_CUR); 934 935 rc = mlx5_glue->devx_general_cmd(ctx, in, sizeof(in), out, sizeof(out)); 936 if (rc) 937 goto error; 938 status = MLX5_GET(query_hca_cap_out, out, status); 939 syndrome = MLX5_GET(query_hca_cap_out, out, syndrome); 940 if (status) { 941 DRV_LOG(DEBUG, "Failed to query devx HCA capabilities, " 942 "status %x, syndrome = %x", status, syndrome); 943 attr->log_max_ft_sampler_num = 0; 944 return -1; 945 } 946 hcattr = MLX5_ADDR_OF(query_hca_cap_out, out, capability); 947 attr->log_max_ft_sampler_num = MLX5_GET 948 (flow_table_nic_cap, hcattr, 949 flow_table_properties_nic_receive.log_max_ft_sampler_num); 950 attr->flow.tunnel_header_0_1 = MLX5_GET 951 (flow_table_nic_cap, hcattr, 952 ft_field_support_2_nic_receive.tunnel_header_0_1); 953 attr->pkt_integrity_match = mlx5_devx_query_pkt_integrity_match(hcattr); 954 /* Query HCA offloads for Ethernet protocol. */ 955 memset(in, 0, sizeof(in)); 956 memset(out, 0, sizeof(out)); 957 MLX5_SET(query_hca_cap_in, in, opcode, MLX5_CMD_OP_QUERY_HCA_CAP); 958 MLX5_SET(query_hca_cap_in, in, op_mod, 959 MLX5_GET_HCA_CAP_OP_MOD_ETHERNET_OFFLOAD_CAPS | 960 MLX5_HCA_CAP_OPMOD_GET_CUR); 961 962 rc = mlx5_glue->devx_general_cmd(ctx, in, sizeof(in), out, sizeof(out)); 963 if (rc) { 964 attr->eth_net_offloads = 0; 965 goto error; 966 } 967 status = MLX5_GET(query_hca_cap_out, out, status); 968 syndrome = MLX5_GET(query_hca_cap_out, out, syndrome); 969 if (status) { 970 DRV_LOG(DEBUG, "Failed to query devx HCA capabilities, " 971 "status %x, syndrome = %x", status, syndrome); 972 attr->eth_net_offloads = 0; 973 return -1; 974 } 975 hcattr = MLX5_ADDR_OF(query_hca_cap_out, out, capability); 976 attr->wqe_vlan_insert = MLX5_GET(per_protocol_networking_offload_caps, 977 hcattr, wqe_vlan_insert); 978 attr->csum_cap = MLX5_GET(per_protocol_networking_offload_caps, 979 hcattr, csum_cap); 980 attr->lro_cap = MLX5_GET(per_protocol_networking_offload_caps, hcattr, 981 lro_cap); 982 attr->tunnel_lro_gre = MLX5_GET(per_protocol_networking_offload_caps, 983 hcattr, tunnel_lro_gre); 984 attr->tunnel_lro_vxlan = MLX5_GET(per_protocol_networking_offload_caps, 985 hcattr, tunnel_lro_vxlan); 986 attr->lro_max_msg_sz_mode = MLX5_GET 987 (per_protocol_networking_offload_caps, 988 hcattr, lro_max_msg_sz_mode); 989 for (i = 0 ; i < MLX5_LRO_NUM_SUPP_PERIODS ; i++) { 990 attr->lro_timer_supported_periods[i] = 991 MLX5_GET(per_protocol_networking_offload_caps, hcattr, 992 lro_timer_supported_periods[i]); 993 } 994 attr->lro_min_mss_size = MLX5_GET(per_protocol_networking_offload_caps, 995 hcattr, lro_min_mss_size); 996 attr->tunnel_stateless_geneve_rx = 997 MLX5_GET(per_protocol_networking_offload_caps, 998 hcattr, tunnel_stateless_geneve_rx); 999 attr->geneve_max_opt_len = 1000 MLX5_GET(per_protocol_networking_offload_caps, 1001 hcattr, max_geneve_opt_len); 1002 attr->wqe_inline_mode = MLX5_GET(per_protocol_networking_offload_caps, 1003 hcattr, wqe_inline_mode); 1004 attr->tunnel_stateless_gtp = MLX5_GET 1005 (per_protocol_networking_offload_caps, 1006 hcattr, tunnel_stateless_gtp); 1007 attr->rss_ind_tbl_cap = MLX5_GET 1008 (per_protocol_networking_offload_caps, 1009 hcattr, rss_ind_tbl_cap); 1010 /* Query HCA attribute for ROCE. */ 1011 if (attr->roce) { 1012 memset(in, 0, sizeof(in)); 1013 memset(out, 0, sizeof(out)); 1014 MLX5_SET(query_hca_cap_in, in, opcode, 1015 MLX5_CMD_OP_QUERY_HCA_CAP); 1016 MLX5_SET(query_hca_cap_in, in, op_mod, 1017 MLX5_GET_HCA_CAP_OP_MOD_ROCE | 1018 MLX5_HCA_CAP_OPMOD_GET_CUR); 1019 rc = mlx5_glue->devx_general_cmd(ctx, in, sizeof(in), 1020 out, sizeof(out)); 1021 if (rc) 1022 goto error; 1023 status = MLX5_GET(query_hca_cap_out, out, status); 1024 syndrome = MLX5_GET(query_hca_cap_out, out, syndrome); 1025 if (status) { 1026 DRV_LOG(DEBUG, 1027 "Failed to query devx HCA ROCE capabilities, " 1028 "status %x, syndrome = %x", status, syndrome); 1029 return -1; 1030 } 1031 hcattr = MLX5_ADDR_OF(query_hca_cap_out, out, capability); 1032 attr->qp_ts_format = MLX5_GET(roce_caps, hcattr, qp_ts_format); 1033 } 1034 if (attr->eth_virt && 1035 attr->wqe_inline_mode == MLX5_CAP_INLINE_MODE_VPORT_CONTEXT) { 1036 rc = mlx5_devx_cmd_query_nic_vport_context(ctx, 0, attr); 1037 if (rc) { 1038 attr->eth_virt = 0; 1039 goto error; 1040 } 1041 } 1042 return 0; 1043 error: 1044 rc = (rc > 0) ? -rc : rc; 1045 return rc; 1046 } 1047 1048 /** 1049 * Query TIS transport domain from QP verbs object using DevX API. 1050 * 1051 * @param[in] qp 1052 * Pointer to verbs QP returned by ibv_create_qp . 1053 * @param[in] tis_num 1054 * TIS number of TIS to query. 1055 * @param[out] tis_td 1056 * Pointer to TIS transport domain variable, to be set by the routine. 1057 * 1058 * @return 1059 * 0 on success, a negative value otherwise. 1060 */ 1061 int 1062 mlx5_devx_cmd_qp_query_tis_td(void *qp, uint32_t tis_num, 1063 uint32_t *tis_td) 1064 { 1065 #ifdef HAVE_IBV_FLOW_DV_SUPPORT 1066 uint32_t in[MLX5_ST_SZ_DW(query_tis_in)] = {0}; 1067 uint32_t out[MLX5_ST_SZ_DW(query_tis_out)] = {0}; 1068 int rc; 1069 void *tis_ctx; 1070 1071 MLX5_SET(query_tis_in, in, opcode, MLX5_CMD_OP_QUERY_TIS); 1072 MLX5_SET(query_tis_in, in, tisn, tis_num); 1073 rc = mlx5_glue->devx_qp_query(qp, in, sizeof(in), out, sizeof(out)); 1074 if (rc) { 1075 DRV_LOG(ERR, "Failed to query QP using DevX"); 1076 return -rc; 1077 }; 1078 tis_ctx = MLX5_ADDR_OF(query_tis_out, out, tis_context); 1079 *tis_td = MLX5_GET(tisc, tis_ctx, transport_domain); 1080 return 0; 1081 #else 1082 (void)qp; 1083 (void)tis_num; 1084 (void)tis_td; 1085 return -ENOTSUP; 1086 #endif 1087 } 1088 1089 /** 1090 * Fill WQ data for DevX API command. 1091 * Utility function for use when creating DevX objects containing a WQ. 1092 * 1093 * @param[in] wq_ctx 1094 * Pointer to WQ context to fill with data. 1095 * @param [in] wq_attr 1096 * Pointer to WQ attributes structure to fill in WQ context. 1097 */ 1098 static void 1099 devx_cmd_fill_wq_data(void *wq_ctx, struct mlx5_devx_wq_attr *wq_attr) 1100 { 1101 MLX5_SET(wq, wq_ctx, wq_type, wq_attr->wq_type); 1102 MLX5_SET(wq, wq_ctx, wq_signature, wq_attr->wq_signature); 1103 MLX5_SET(wq, wq_ctx, end_padding_mode, wq_attr->end_padding_mode); 1104 MLX5_SET(wq, wq_ctx, cd_slave, wq_attr->cd_slave); 1105 MLX5_SET(wq, wq_ctx, hds_skip_first_sge, wq_attr->hds_skip_first_sge); 1106 MLX5_SET(wq, wq_ctx, log2_hds_buf_size, wq_attr->log2_hds_buf_size); 1107 MLX5_SET(wq, wq_ctx, page_offset, wq_attr->page_offset); 1108 MLX5_SET(wq, wq_ctx, lwm, wq_attr->lwm); 1109 MLX5_SET(wq, wq_ctx, pd, wq_attr->pd); 1110 MLX5_SET(wq, wq_ctx, uar_page, wq_attr->uar_page); 1111 MLX5_SET64(wq, wq_ctx, dbr_addr, wq_attr->dbr_addr); 1112 MLX5_SET(wq, wq_ctx, hw_counter, wq_attr->hw_counter); 1113 MLX5_SET(wq, wq_ctx, sw_counter, wq_attr->sw_counter); 1114 MLX5_SET(wq, wq_ctx, log_wq_stride, wq_attr->log_wq_stride); 1115 if (wq_attr->log_wq_pg_sz > MLX5_ADAPTER_PAGE_SHIFT) 1116 MLX5_SET(wq, wq_ctx, log_wq_pg_sz, 1117 wq_attr->log_wq_pg_sz - MLX5_ADAPTER_PAGE_SHIFT); 1118 MLX5_SET(wq, wq_ctx, log_wq_sz, wq_attr->log_wq_sz); 1119 MLX5_SET(wq, wq_ctx, dbr_umem_valid, wq_attr->dbr_umem_valid); 1120 MLX5_SET(wq, wq_ctx, wq_umem_valid, wq_attr->wq_umem_valid); 1121 MLX5_SET(wq, wq_ctx, log_hairpin_num_packets, 1122 wq_attr->log_hairpin_num_packets); 1123 MLX5_SET(wq, wq_ctx, log_hairpin_data_sz, wq_attr->log_hairpin_data_sz); 1124 MLX5_SET(wq, wq_ctx, single_wqe_log_num_of_strides, 1125 wq_attr->single_wqe_log_num_of_strides); 1126 MLX5_SET(wq, wq_ctx, two_byte_shift_en, wq_attr->two_byte_shift_en); 1127 MLX5_SET(wq, wq_ctx, single_stride_log_num_of_bytes, 1128 wq_attr->single_stride_log_num_of_bytes); 1129 MLX5_SET(wq, wq_ctx, dbr_umem_id, wq_attr->dbr_umem_id); 1130 MLX5_SET(wq, wq_ctx, wq_umem_id, wq_attr->wq_umem_id); 1131 MLX5_SET64(wq, wq_ctx, wq_umem_offset, wq_attr->wq_umem_offset); 1132 } 1133 1134 /** 1135 * Create RQ using DevX API. 1136 * 1137 * @param[in] ctx 1138 * Context returned from mlx5 open_device() glue function. 1139 * @param [in] rq_attr 1140 * Pointer to create RQ attributes structure. 1141 * @param [in] socket 1142 * CPU socket ID for allocations. 1143 * 1144 * @return 1145 * The DevX object created, NULL otherwise and rte_errno is set. 1146 */ 1147 struct mlx5_devx_obj * 1148 mlx5_devx_cmd_create_rq(void *ctx, 1149 struct mlx5_devx_create_rq_attr *rq_attr, 1150 int socket) 1151 { 1152 uint32_t in[MLX5_ST_SZ_DW(create_rq_in)] = {0}; 1153 uint32_t out[MLX5_ST_SZ_DW(create_rq_out)] = {0}; 1154 void *rq_ctx, *wq_ctx; 1155 struct mlx5_devx_wq_attr *wq_attr; 1156 struct mlx5_devx_obj *rq = NULL; 1157 1158 rq = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*rq), 0, socket); 1159 if (!rq) { 1160 DRV_LOG(ERR, "Failed to allocate RQ data"); 1161 rte_errno = ENOMEM; 1162 return NULL; 1163 } 1164 MLX5_SET(create_rq_in, in, opcode, MLX5_CMD_OP_CREATE_RQ); 1165 rq_ctx = MLX5_ADDR_OF(create_rq_in, in, ctx); 1166 MLX5_SET(rqc, rq_ctx, rlky, rq_attr->rlky); 1167 MLX5_SET(rqc, rq_ctx, delay_drop_en, rq_attr->delay_drop_en); 1168 MLX5_SET(rqc, rq_ctx, scatter_fcs, rq_attr->scatter_fcs); 1169 MLX5_SET(rqc, rq_ctx, vsd, rq_attr->vsd); 1170 MLX5_SET(rqc, rq_ctx, mem_rq_type, rq_attr->mem_rq_type); 1171 MLX5_SET(rqc, rq_ctx, state, rq_attr->state); 1172 MLX5_SET(rqc, rq_ctx, flush_in_error_en, rq_attr->flush_in_error_en); 1173 MLX5_SET(rqc, rq_ctx, hairpin, rq_attr->hairpin); 1174 MLX5_SET(rqc, rq_ctx, user_index, rq_attr->user_index); 1175 MLX5_SET(rqc, rq_ctx, cqn, rq_attr->cqn); 1176 MLX5_SET(rqc, rq_ctx, counter_set_id, rq_attr->counter_set_id); 1177 MLX5_SET(rqc, rq_ctx, rmpn, rq_attr->rmpn); 1178 MLX5_SET(sqc, rq_ctx, ts_format, rq_attr->ts_format); 1179 wq_ctx = MLX5_ADDR_OF(rqc, rq_ctx, wq); 1180 wq_attr = &rq_attr->wq_attr; 1181 devx_cmd_fill_wq_data(wq_ctx, wq_attr); 1182 rq->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), 1183 out, sizeof(out)); 1184 if (!rq->obj) { 1185 DRV_LOG(ERR, "Failed to create RQ using DevX"); 1186 rte_errno = errno; 1187 mlx5_free(rq); 1188 return NULL; 1189 } 1190 rq->id = MLX5_GET(create_rq_out, out, rqn); 1191 return rq; 1192 } 1193 1194 /** 1195 * Modify RQ using DevX API. 1196 * 1197 * @param[in] rq 1198 * Pointer to RQ object structure. 1199 * @param [in] rq_attr 1200 * Pointer to modify RQ attributes structure. 1201 * 1202 * @return 1203 * 0 on success, a negative errno value otherwise and rte_errno is set. 1204 */ 1205 int 1206 mlx5_devx_cmd_modify_rq(struct mlx5_devx_obj *rq, 1207 struct mlx5_devx_modify_rq_attr *rq_attr) 1208 { 1209 uint32_t in[MLX5_ST_SZ_DW(modify_rq_in)] = {0}; 1210 uint32_t out[MLX5_ST_SZ_DW(modify_rq_out)] = {0}; 1211 void *rq_ctx, *wq_ctx; 1212 int ret; 1213 1214 MLX5_SET(modify_rq_in, in, opcode, MLX5_CMD_OP_MODIFY_RQ); 1215 MLX5_SET(modify_rq_in, in, rq_state, rq_attr->rq_state); 1216 MLX5_SET(modify_rq_in, in, rqn, rq->id); 1217 MLX5_SET64(modify_rq_in, in, modify_bitmask, rq_attr->modify_bitmask); 1218 rq_ctx = MLX5_ADDR_OF(modify_rq_in, in, ctx); 1219 MLX5_SET(rqc, rq_ctx, state, rq_attr->state); 1220 if (rq_attr->modify_bitmask & 1221 MLX5_MODIFY_RQ_IN_MODIFY_BITMASK_SCATTER_FCS) 1222 MLX5_SET(rqc, rq_ctx, scatter_fcs, rq_attr->scatter_fcs); 1223 if (rq_attr->modify_bitmask & MLX5_MODIFY_RQ_IN_MODIFY_BITMASK_VSD) 1224 MLX5_SET(rqc, rq_ctx, vsd, rq_attr->vsd); 1225 if (rq_attr->modify_bitmask & 1226 MLX5_MODIFY_RQ_IN_MODIFY_BITMASK_RQ_COUNTER_SET_ID) 1227 MLX5_SET(rqc, rq_ctx, counter_set_id, rq_attr->counter_set_id); 1228 MLX5_SET(rqc, rq_ctx, hairpin_peer_sq, rq_attr->hairpin_peer_sq); 1229 MLX5_SET(rqc, rq_ctx, hairpin_peer_vhca, rq_attr->hairpin_peer_vhca); 1230 if (rq_attr->modify_bitmask & MLX5_MODIFY_RQ_IN_MODIFY_BITMASK_WQ_LWM) { 1231 wq_ctx = MLX5_ADDR_OF(rqc, rq_ctx, wq); 1232 MLX5_SET(wq, wq_ctx, lwm, rq_attr->lwm); 1233 } 1234 ret = mlx5_glue->devx_obj_modify(rq->obj, in, sizeof(in), 1235 out, sizeof(out)); 1236 if (ret) { 1237 DRV_LOG(ERR, "Failed to modify RQ using DevX"); 1238 rte_errno = errno; 1239 return -errno; 1240 } 1241 return ret; 1242 } 1243 1244 /** 1245 * Create TIR using DevX API. 1246 * 1247 * @param[in] ctx 1248 * Context returned from mlx5 open_device() glue function. 1249 * @param [in] tir_attr 1250 * Pointer to TIR attributes structure. 1251 * 1252 * @return 1253 * The DevX object created, NULL otherwise and rte_errno is set. 1254 */ 1255 struct mlx5_devx_obj * 1256 mlx5_devx_cmd_create_tir(void *ctx, 1257 struct mlx5_devx_tir_attr *tir_attr) 1258 { 1259 uint32_t in[MLX5_ST_SZ_DW(create_tir_in)] = {0}; 1260 uint32_t out[MLX5_ST_SZ_DW(create_tir_out)] = {0}; 1261 void *tir_ctx, *outer, *inner, *rss_key; 1262 struct mlx5_devx_obj *tir = NULL; 1263 1264 tir = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*tir), 0, SOCKET_ID_ANY); 1265 if (!tir) { 1266 DRV_LOG(ERR, "Failed to allocate TIR data"); 1267 rte_errno = ENOMEM; 1268 return NULL; 1269 } 1270 MLX5_SET(create_tir_in, in, opcode, MLX5_CMD_OP_CREATE_TIR); 1271 tir_ctx = MLX5_ADDR_OF(create_tir_in, in, ctx); 1272 MLX5_SET(tirc, tir_ctx, disp_type, tir_attr->disp_type); 1273 MLX5_SET(tirc, tir_ctx, lro_timeout_period_usecs, 1274 tir_attr->lro_timeout_period_usecs); 1275 MLX5_SET(tirc, tir_ctx, lro_enable_mask, tir_attr->lro_enable_mask); 1276 MLX5_SET(tirc, tir_ctx, lro_max_msg_sz, tir_attr->lro_max_msg_sz); 1277 MLX5_SET(tirc, tir_ctx, inline_rqn, tir_attr->inline_rqn); 1278 MLX5_SET(tirc, tir_ctx, rx_hash_symmetric, tir_attr->rx_hash_symmetric); 1279 MLX5_SET(tirc, tir_ctx, tunneled_offload_en, 1280 tir_attr->tunneled_offload_en); 1281 MLX5_SET(tirc, tir_ctx, indirect_table, tir_attr->indirect_table); 1282 MLX5_SET(tirc, tir_ctx, rx_hash_fn, tir_attr->rx_hash_fn); 1283 MLX5_SET(tirc, tir_ctx, self_lb_block, tir_attr->self_lb_block); 1284 MLX5_SET(tirc, tir_ctx, transport_domain, tir_attr->transport_domain); 1285 rss_key = MLX5_ADDR_OF(tirc, tir_ctx, rx_hash_toeplitz_key); 1286 memcpy(rss_key, tir_attr->rx_hash_toeplitz_key, MLX5_RSS_HASH_KEY_LEN); 1287 outer = MLX5_ADDR_OF(tirc, tir_ctx, rx_hash_field_selector_outer); 1288 MLX5_SET(rx_hash_field_select, outer, l3_prot_type, 1289 tir_attr->rx_hash_field_selector_outer.l3_prot_type); 1290 MLX5_SET(rx_hash_field_select, outer, l4_prot_type, 1291 tir_attr->rx_hash_field_selector_outer.l4_prot_type); 1292 MLX5_SET(rx_hash_field_select, outer, selected_fields, 1293 tir_attr->rx_hash_field_selector_outer.selected_fields); 1294 inner = MLX5_ADDR_OF(tirc, tir_ctx, rx_hash_field_selector_inner); 1295 MLX5_SET(rx_hash_field_select, inner, l3_prot_type, 1296 tir_attr->rx_hash_field_selector_inner.l3_prot_type); 1297 MLX5_SET(rx_hash_field_select, inner, l4_prot_type, 1298 tir_attr->rx_hash_field_selector_inner.l4_prot_type); 1299 MLX5_SET(rx_hash_field_select, inner, selected_fields, 1300 tir_attr->rx_hash_field_selector_inner.selected_fields); 1301 tir->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), 1302 out, sizeof(out)); 1303 if (!tir->obj) { 1304 DRV_LOG(ERR, "Failed to create TIR using DevX"); 1305 rte_errno = errno; 1306 mlx5_free(tir); 1307 return NULL; 1308 } 1309 tir->id = MLX5_GET(create_tir_out, out, tirn); 1310 return tir; 1311 } 1312 1313 /** 1314 * Modify TIR using DevX API. 1315 * 1316 * @param[in] tir 1317 * Pointer to TIR DevX object structure. 1318 * @param [in] modify_tir_attr 1319 * Pointer to TIR modification attributes structure. 1320 * 1321 * @return 1322 * 0 on success, a negative errno value otherwise and rte_errno is set. 1323 */ 1324 int 1325 mlx5_devx_cmd_modify_tir(struct mlx5_devx_obj *tir, 1326 struct mlx5_devx_modify_tir_attr *modify_tir_attr) 1327 { 1328 struct mlx5_devx_tir_attr *tir_attr = &modify_tir_attr->tir; 1329 uint32_t in[MLX5_ST_SZ_DW(modify_tir_in)] = {0}; 1330 uint32_t out[MLX5_ST_SZ_DW(modify_tir_out)] = {0}; 1331 void *tir_ctx; 1332 int ret; 1333 1334 MLX5_SET(modify_tir_in, in, opcode, MLX5_CMD_OP_MODIFY_TIR); 1335 MLX5_SET(modify_tir_in, in, tirn, modify_tir_attr->tirn); 1336 MLX5_SET64(modify_tir_in, in, modify_bitmask, 1337 modify_tir_attr->modify_bitmask); 1338 tir_ctx = MLX5_ADDR_OF(modify_rq_in, in, ctx); 1339 if (modify_tir_attr->modify_bitmask & 1340 MLX5_MODIFY_TIR_IN_MODIFY_BITMASK_LRO) { 1341 MLX5_SET(tirc, tir_ctx, lro_timeout_period_usecs, 1342 tir_attr->lro_timeout_period_usecs); 1343 MLX5_SET(tirc, tir_ctx, lro_enable_mask, 1344 tir_attr->lro_enable_mask); 1345 MLX5_SET(tirc, tir_ctx, lro_max_msg_sz, 1346 tir_attr->lro_max_msg_sz); 1347 } 1348 if (modify_tir_attr->modify_bitmask & 1349 MLX5_MODIFY_TIR_IN_MODIFY_BITMASK_INDIRECT_TABLE) 1350 MLX5_SET(tirc, tir_ctx, indirect_table, 1351 tir_attr->indirect_table); 1352 if (modify_tir_attr->modify_bitmask & 1353 MLX5_MODIFY_TIR_IN_MODIFY_BITMASK_HASH) { 1354 int i; 1355 void *outer, *inner; 1356 1357 MLX5_SET(tirc, tir_ctx, rx_hash_symmetric, 1358 tir_attr->rx_hash_symmetric); 1359 MLX5_SET(tirc, tir_ctx, rx_hash_fn, tir_attr->rx_hash_fn); 1360 for (i = 0; i < 10; i++) { 1361 MLX5_SET(tirc, tir_ctx, rx_hash_toeplitz_key[i], 1362 tir_attr->rx_hash_toeplitz_key[i]); 1363 } 1364 outer = MLX5_ADDR_OF(tirc, tir_ctx, 1365 rx_hash_field_selector_outer); 1366 MLX5_SET(rx_hash_field_select, outer, l3_prot_type, 1367 tir_attr->rx_hash_field_selector_outer.l3_prot_type); 1368 MLX5_SET(rx_hash_field_select, outer, l4_prot_type, 1369 tir_attr->rx_hash_field_selector_outer.l4_prot_type); 1370 MLX5_SET 1371 (rx_hash_field_select, outer, selected_fields, 1372 tir_attr->rx_hash_field_selector_outer.selected_fields); 1373 inner = MLX5_ADDR_OF(tirc, tir_ctx, 1374 rx_hash_field_selector_inner); 1375 MLX5_SET(rx_hash_field_select, inner, l3_prot_type, 1376 tir_attr->rx_hash_field_selector_inner.l3_prot_type); 1377 MLX5_SET(rx_hash_field_select, inner, l4_prot_type, 1378 tir_attr->rx_hash_field_selector_inner.l4_prot_type); 1379 MLX5_SET 1380 (rx_hash_field_select, inner, selected_fields, 1381 tir_attr->rx_hash_field_selector_inner.selected_fields); 1382 } 1383 if (modify_tir_attr->modify_bitmask & 1384 MLX5_MODIFY_TIR_IN_MODIFY_BITMASK_SELF_LB_EN) { 1385 MLX5_SET(tirc, tir_ctx, self_lb_block, tir_attr->self_lb_block); 1386 } 1387 ret = mlx5_glue->devx_obj_modify(tir->obj, in, sizeof(in), 1388 out, sizeof(out)); 1389 if (ret) { 1390 DRV_LOG(ERR, "Failed to modify TIR using DevX"); 1391 rte_errno = errno; 1392 return -errno; 1393 } 1394 return ret; 1395 } 1396 1397 /** 1398 * Create RQT using DevX API. 1399 * 1400 * @param[in] ctx 1401 * Context returned from mlx5 open_device() glue function. 1402 * @param [in] rqt_attr 1403 * Pointer to RQT attributes structure. 1404 * 1405 * @return 1406 * The DevX object created, NULL otherwise and rte_errno is set. 1407 */ 1408 struct mlx5_devx_obj * 1409 mlx5_devx_cmd_create_rqt(void *ctx, 1410 struct mlx5_devx_rqt_attr *rqt_attr) 1411 { 1412 uint32_t *in = NULL; 1413 uint32_t inlen = MLX5_ST_SZ_BYTES(create_rqt_in) + 1414 rqt_attr->rqt_actual_size * sizeof(uint32_t); 1415 uint32_t out[MLX5_ST_SZ_DW(create_rqt_out)] = {0}; 1416 void *rqt_ctx; 1417 struct mlx5_devx_obj *rqt = NULL; 1418 int i; 1419 1420 in = mlx5_malloc(MLX5_MEM_ZERO, inlen, 0, SOCKET_ID_ANY); 1421 if (!in) { 1422 DRV_LOG(ERR, "Failed to allocate RQT IN data"); 1423 rte_errno = ENOMEM; 1424 return NULL; 1425 } 1426 rqt = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*rqt), 0, SOCKET_ID_ANY); 1427 if (!rqt) { 1428 DRV_LOG(ERR, "Failed to allocate RQT data"); 1429 rte_errno = ENOMEM; 1430 mlx5_free(in); 1431 return NULL; 1432 } 1433 MLX5_SET(create_rqt_in, in, opcode, MLX5_CMD_OP_CREATE_RQT); 1434 rqt_ctx = MLX5_ADDR_OF(create_rqt_in, in, rqt_context); 1435 MLX5_SET(rqtc, rqt_ctx, list_q_type, rqt_attr->rq_type); 1436 MLX5_SET(rqtc, rqt_ctx, rqt_max_size, rqt_attr->rqt_max_size); 1437 MLX5_SET(rqtc, rqt_ctx, rqt_actual_size, rqt_attr->rqt_actual_size); 1438 for (i = 0; i < rqt_attr->rqt_actual_size; i++) 1439 MLX5_SET(rqtc, rqt_ctx, rq_num[i], rqt_attr->rq_list[i]); 1440 rqt->obj = mlx5_glue->devx_obj_create(ctx, in, inlen, out, sizeof(out)); 1441 mlx5_free(in); 1442 if (!rqt->obj) { 1443 DRV_LOG(ERR, "Failed to create RQT using DevX"); 1444 rte_errno = errno; 1445 mlx5_free(rqt); 1446 return NULL; 1447 } 1448 rqt->id = MLX5_GET(create_rqt_out, out, rqtn); 1449 return rqt; 1450 } 1451 1452 /** 1453 * Modify RQT using DevX API. 1454 * 1455 * @param[in] rqt 1456 * Pointer to RQT DevX object structure. 1457 * @param [in] rqt_attr 1458 * Pointer to RQT attributes structure. 1459 * 1460 * @return 1461 * 0 on success, a negative errno value otherwise and rte_errno is set. 1462 */ 1463 int 1464 mlx5_devx_cmd_modify_rqt(struct mlx5_devx_obj *rqt, 1465 struct mlx5_devx_rqt_attr *rqt_attr) 1466 { 1467 uint32_t inlen = MLX5_ST_SZ_BYTES(modify_rqt_in) + 1468 rqt_attr->rqt_actual_size * sizeof(uint32_t); 1469 uint32_t out[MLX5_ST_SZ_DW(modify_rqt_out)] = {0}; 1470 uint32_t *in = mlx5_malloc(MLX5_MEM_ZERO, inlen, 0, SOCKET_ID_ANY); 1471 void *rqt_ctx; 1472 int i; 1473 int ret; 1474 1475 if (!in) { 1476 DRV_LOG(ERR, "Failed to allocate RQT modify IN data."); 1477 rte_errno = ENOMEM; 1478 return -ENOMEM; 1479 } 1480 MLX5_SET(modify_rqt_in, in, opcode, MLX5_CMD_OP_MODIFY_RQT); 1481 MLX5_SET(modify_rqt_in, in, rqtn, rqt->id); 1482 MLX5_SET64(modify_rqt_in, in, modify_bitmask, 0x1); 1483 rqt_ctx = MLX5_ADDR_OF(modify_rqt_in, in, rqt_context); 1484 MLX5_SET(rqtc, rqt_ctx, list_q_type, rqt_attr->rq_type); 1485 MLX5_SET(rqtc, rqt_ctx, rqt_max_size, rqt_attr->rqt_max_size); 1486 MLX5_SET(rqtc, rqt_ctx, rqt_actual_size, rqt_attr->rqt_actual_size); 1487 for (i = 0; i < rqt_attr->rqt_actual_size; i++) 1488 MLX5_SET(rqtc, rqt_ctx, rq_num[i], rqt_attr->rq_list[i]); 1489 ret = mlx5_glue->devx_obj_modify(rqt->obj, in, inlen, out, sizeof(out)); 1490 mlx5_free(in); 1491 if (ret) { 1492 DRV_LOG(ERR, "Failed to modify RQT using DevX."); 1493 rte_errno = errno; 1494 return -rte_errno; 1495 } 1496 return ret; 1497 } 1498 1499 /** 1500 * Create SQ using DevX API. 1501 * 1502 * @param[in] ctx 1503 * Context returned from mlx5 open_device() glue function. 1504 * @param [in] sq_attr 1505 * Pointer to SQ attributes structure. 1506 * @param [in] socket 1507 * CPU socket ID for allocations. 1508 * 1509 * @return 1510 * The DevX object created, NULL otherwise and rte_errno is set. 1511 **/ 1512 struct mlx5_devx_obj * 1513 mlx5_devx_cmd_create_sq(void *ctx, 1514 struct mlx5_devx_create_sq_attr *sq_attr) 1515 { 1516 uint32_t in[MLX5_ST_SZ_DW(create_sq_in)] = {0}; 1517 uint32_t out[MLX5_ST_SZ_DW(create_sq_out)] = {0}; 1518 void *sq_ctx; 1519 void *wq_ctx; 1520 struct mlx5_devx_wq_attr *wq_attr; 1521 struct mlx5_devx_obj *sq = NULL; 1522 1523 sq = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*sq), 0, SOCKET_ID_ANY); 1524 if (!sq) { 1525 DRV_LOG(ERR, "Failed to allocate SQ data"); 1526 rte_errno = ENOMEM; 1527 return NULL; 1528 } 1529 MLX5_SET(create_sq_in, in, opcode, MLX5_CMD_OP_CREATE_SQ); 1530 sq_ctx = MLX5_ADDR_OF(create_sq_in, in, ctx); 1531 MLX5_SET(sqc, sq_ctx, rlky, sq_attr->rlky); 1532 MLX5_SET(sqc, sq_ctx, cd_master, sq_attr->cd_master); 1533 MLX5_SET(sqc, sq_ctx, fre, sq_attr->fre); 1534 MLX5_SET(sqc, sq_ctx, flush_in_error_en, sq_attr->flush_in_error_en); 1535 MLX5_SET(sqc, sq_ctx, allow_multi_pkt_send_wqe, 1536 sq_attr->allow_multi_pkt_send_wqe); 1537 MLX5_SET(sqc, sq_ctx, min_wqe_inline_mode, 1538 sq_attr->min_wqe_inline_mode); 1539 MLX5_SET(sqc, sq_ctx, state, sq_attr->state); 1540 MLX5_SET(sqc, sq_ctx, reg_umr, sq_attr->reg_umr); 1541 MLX5_SET(sqc, sq_ctx, allow_swp, sq_attr->allow_swp); 1542 MLX5_SET(sqc, sq_ctx, hairpin, sq_attr->hairpin); 1543 MLX5_SET(sqc, sq_ctx, non_wire, sq_attr->non_wire); 1544 MLX5_SET(sqc, sq_ctx, static_sq_wq, sq_attr->static_sq_wq); 1545 MLX5_SET(sqc, sq_ctx, user_index, sq_attr->user_index); 1546 MLX5_SET(sqc, sq_ctx, cqn, sq_attr->cqn); 1547 MLX5_SET(sqc, sq_ctx, packet_pacing_rate_limit_index, 1548 sq_attr->packet_pacing_rate_limit_index); 1549 MLX5_SET(sqc, sq_ctx, tis_lst_sz, sq_attr->tis_lst_sz); 1550 MLX5_SET(sqc, sq_ctx, tis_num_0, sq_attr->tis_num); 1551 MLX5_SET(sqc, sq_ctx, ts_format, sq_attr->ts_format); 1552 wq_ctx = MLX5_ADDR_OF(sqc, sq_ctx, wq); 1553 wq_attr = &sq_attr->wq_attr; 1554 devx_cmd_fill_wq_data(wq_ctx, wq_attr); 1555 sq->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), 1556 out, sizeof(out)); 1557 if (!sq->obj) { 1558 DRV_LOG(ERR, "Failed to create SQ using DevX"); 1559 rte_errno = errno; 1560 mlx5_free(sq); 1561 return NULL; 1562 } 1563 sq->id = MLX5_GET(create_sq_out, out, sqn); 1564 return sq; 1565 } 1566 1567 /** 1568 * Modify SQ using DevX API. 1569 * 1570 * @param[in] sq 1571 * Pointer to SQ object structure. 1572 * @param [in] sq_attr 1573 * Pointer to SQ attributes structure. 1574 * 1575 * @return 1576 * 0 on success, a negative errno value otherwise and rte_errno is set. 1577 */ 1578 int 1579 mlx5_devx_cmd_modify_sq(struct mlx5_devx_obj *sq, 1580 struct mlx5_devx_modify_sq_attr *sq_attr) 1581 { 1582 uint32_t in[MLX5_ST_SZ_DW(modify_sq_in)] = {0}; 1583 uint32_t out[MLX5_ST_SZ_DW(modify_sq_out)] = {0}; 1584 void *sq_ctx; 1585 int ret; 1586 1587 MLX5_SET(modify_sq_in, in, opcode, MLX5_CMD_OP_MODIFY_SQ); 1588 MLX5_SET(modify_sq_in, in, sq_state, sq_attr->sq_state); 1589 MLX5_SET(modify_sq_in, in, sqn, sq->id); 1590 sq_ctx = MLX5_ADDR_OF(modify_sq_in, in, ctx); 1591 MLX5_SET(sqc, sq_ctx, state, sq_attr->state); 1592 MLX5_SET(sqc, sq_ctx, hairpin_peer_rq, sq_attr->hairpin_peer_rq); 1593 MLX5_SET(sqc, sq_ctx, hairpin_peer_vhca, sq_attr->hairpin_peer_vhca); 1594 ret = mlx5_glue->devx_obj_modify(sq->obj, in, sizeof(in), 1595 out, sizeof(out)); 1596 if (ret) { 1597 DRV_LOG(ERR, "Failed to modify SQ using DevX"); 1598 rte_errno = errno; 1599 return -rte_errno; 1600 } 1601 return ret; 1602 } 1603 1604 /** 1605 * Create TIS using DevX API. 1606 * 1607 * @param[in] ctx 1608 * Context returned from mlx5 open_device() glue function. 1609 * @param [in] tis_attr 1610 * Pointer to TIS attributes structure. 1611 * 1612 * @return 1613 * The DevX object created, NULL otherwise and rte_errno is set. 1614 */ 1615 struct mlx5_devx_obj * 1616 mlx5_devx_cmd_create_tis(void *ctx, 1617 struct mlx5_devx_tis_attr *tis_attr) 1618 { 1619 uint32_t in[MLX5_ST_SZ_DW(create_tis_in)] = {0}; 1620 uint32_t out[MLX5_ST_SZ_DW(create_tis_out)] = {0}; 1621 struct mlx5_devx_obj *tis = NULL; 1622 void *tis_ctx; 1623 1624 tis = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*tis), 0, SOCKET_ID_ANY); 1625 if (!tis) { 1626 DRV_LOG(ERR, "Failed to allocate TIS object"); 1627 rte_errno = ENOMEM; 1628 return NULL; 1629 } 1630 MLX5_SET(create_tis_in, in, opcode, MLX5_CMD_OP_CREATE_TIS); 1631 tis_ctx = MLX5_ADDR_OF(create_tis_in, in, ctx); 1632 MLX5_SET(tisc, tis_ctx, strict_lag_tx_port_affinity, 1633 tis_attr->strict_lag_tx_port_affinity); 1634 MLX5_SET(tisc, tis_ctx, lag_tx_port_affinity, 1635 tis_attr->lag_tx_port_affinity); 1636 MLX5_SET(tisc, tis_ctx, prio, tis_attr->prio); 1637 MLX5_SET(tisc, tis_ctx, transport_domain, 1638 tis_attr->transport_domain); 1639 tis->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), 1640 out, sizeof(out)); 1641 if (!tis->obj) { 1642 DRV_LOG(ERR, "Failed to create TIS using DevX"); 1643 rte_errno = errno; 1644 mlx5_free(tis); 1645 return NULL; 1646 } 1647 tis->id = MLX5_GET(create_tis_out, out, tisn); 1648 return tis; 1649 } 1650 1651 /** 1652 * Create transport domain using DevX API. 1653 * 1654 * @param[in] ctx 1655 * Context returned from mlx5 open_device() glue function. 1656 * @return 1657 * The DevX object created, NULL otherwise and rte_errno is set. 1658 */ 1659 struct mlx5_devx_obj * 1660 mlx5_devx_cmd_create_td(void *ctx) 1661 { 1662 uint32_t in[MLX5_ST_SZ_DW(alloc_transport_domain_in)] = {0}; 1663 uint32_t out[MLX5_ST_SZ_DW(alloc_transport_domain_out)] = {0}; 1664 struct mlx5_devx_obj *td = NULL; 1665 1666 td = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*td), 0, SOCKET_ID_ANY); 1667 if (!td) { 1668 DRV_LOG(ERR, "Failed to allocate TD object"); 1669 rte_errno = ENOMEM; 1670 return NULL; 1671 } 1672 MLX5_SET(alloc_transport_domain_in, in, opcode, 1673 MLX5_CMD_OP_ALLOC_TRANSPORT_DOMAIN); 1674 td->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), 1675 out, sizeof(out)); 1676 if (!td->obj) { 1677 DRV_LOG(ERR, "Failed to create TIS using DevX"); 1678 rte_errno = errno; 1679 mlx5_free(td); 1680 return NULL; 1681 } 1682 td->id = MLX5_GET(alloc_transport_domain_out, out, 1683 transport_domain); 1684 return td; 1685 } 1686 1687 /** 1688 * Dump all flows to file. 1689 * 1690 * @param[in] fdb_domain 1691 * FDB domain. 1692 * @param[in] rx_domain 1693 * RX domain. 1694 * @param[in] tx_domain 1695 * TX domain. 1696 * @param[out] file 1697 * Pointer to file stream. 1698 * 1699 * @return 1700 * 0 on success, a nagative value otherwise. 1701 */ 1702 int 1703 mlx5_devx_cmd_flow_dump(void *fdb_domain __rte_unused, 1704 void *rx_domain __rte_unused, 1705 void *tx_domain __rte_unused, FILE *file __rte_unused) 1706 { 1707 int ret = 0; 1708 1709 #ifdef HAVE_MLX5_DR_FLOW_DUMP 1710 if (fdb_domain) { 1711 ret = mlx5_glue->dr_dump_domain(file, fdb_domain); 1712 if (ret) 1713 return ret; 1714 } 1715 MLX5_ASSERT(rx_domain); 1716 ret = mlx5_glue->dr_dump_domain(file, rx_domain); 1717 if (ret) 1718 return ret; 1719 MLX5_ASSERT(tx_domain); 1720 ret = mlx5_glue->dr_dump_domain(file, tx_domain); 1721 #else 1722 ret = ENOTSUP; 1723 #endif 1724 return -ret; 1725 } 1726 1727 int 1728 mlx5_devx_cmd_flow_single_dump(void *rule_info __rte_unused, 1729 FILE *file __rte_unused) 1730 { 1731 int ret = 0; 1732 #ifdef HAVE_MLX5_DR_FLOW_DUMP_RULE 1733 if (rule_info) 1734 ret = mlx5_glue->dr_dump_rule(file, rule_info); 1735 #else 1736 ret = ENOTSUP; 1737 #endif 1738 return -ret; 1739 } 1740 1741 /* 1742 * Create CQ using DevX API. 1743 * 1744 * @param[in] ctx 1745 * Context returned from mlx5 open_device() glue function. 1746 * @param [in] attr 1747 * Pointer to CQ attributes structure. 1748 * 1749 * @return 1750 * The DevX object created, NULL otherwise and rte_errno is set. 1751 */ 1752 struct mlx5_devx_obj * 1753 mlx5_devx_cmd_create_cq(void *ctx, struct mlx5_devx_cq_attr *attr) 1754 { 1755 uint32_t in[MLX5_ST_SZ_DW(create_cq_in)] = {0}; 1756 uint32_t out[MLX5_ST_SZ_DW(create_cq_out)] = {0}; 1757 struct mlx5_devx_obj *cq_obj = mlx5_malloc(MLX5_MEM_ZERO, 1758 sizeof(*cq_obj), 1759 0, SOCKET_ID_ANY); 1760 void *cqctx = MLX5_ADDR_OF(create_cq_in, in, cq_context); 1761 1762 if (!cq_obj) { 1763 DRV_LOG(ERR, "Failed to allocate CQ object memory."); 1764 rte_errno = ENOMEM; 1765 return NULL; 1766 } 1767 MLX5_SET(create_cq_in, in, opcode, MLX5_CMD_OP_CREATE_CQ); 1768 if (attr->db_umem_valid) { 1769 MLX5_SET(cqc, cqctx, dbr_umem_valid, attr->db_umem_valid); 1770 MLX5_SET(cqc, cqctx, dbr_umem_id, attr->db_umem_id); 1771 MLX5_SET64(cqc, cqctx, dbr_addr, attr->db_umem_offset); 1772 } else { 1773 MLX5_SET64(cqc, cqctx, dbr_addr, attr->db_addr); 1774 } 1775 MLX5_SET(cqc, cqctx, cqe_sz, (RTE_CACHE_LINE_SIZE == 128) ? 1776 MLX5_CQE_SIZE_128B : MLX5_CQE_SIZE_64B); 1777 MLX5_SET(cqc, cqctx, cc, attr->use_first_only); 1778 MLX5_SET(cqc, cqctx, oi, attr->overrun_ignore); 1779 MLX5_SET(cqc, cqctx, log_cq_size, attr->log_cq_size); 1780 if (attr->log_page_size > MLX5_ADAPTER_PAGE_SHIFT) 1781 MLX5_SET(cqc, cqctx, log_page_size, 1782 attr->log_page_size - MLX5_ADAPTER_PAGE_SHIFT); 1783 MLX5_SET(cqc, cqctx, c_eqn, attr->eqn); 1784 MLX5_SET(cqc, cqctx, uar_page, attr->uar_page_id); 1785 MLX5_SET(cqc, cqctx, cqe_comp_en, !!attr->cqe_comp_en); 1786 MLX5_SET(cqc, cqctx, mini_cqe_res_format, attr->mini_cqe_res_format); 1787 MLX5_SET(cqc, cqctx, mini_cqe_res_format_ext, 1788 attr->mini_cqe_res_format_ext); 1789 if (attr->q_umem_valid) { 1790 MLX5_SET(create_cq_in, in, cq_umem_valid, attr->q_umem_valid); 1791 MLX5_SET(create_cq_in, in, cq_umem_id, attr->q_umem_id); 1792 MLX5_SET64(create_cq_in, in, cq_umem_offset, 1793 attr->q_umem_offset); 1794 } 1795 cq_obj->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), out, 1796 sizeof(out)); 1797 if (!cq_obj->obj) { 1798 rte_errno = errno; 1799 DRV_LOG(ERR, "Failed to create CQ using DevX errno=%d.", errno); 1800 mlx5_free(cq_obj); 1801 return NULL; 1802 } 1803 cq_obj->id = MLX5_GET(create_cq_out, out, cqn); 1804 return cq_obj; 1805 } 1806 1807 /** 1808 * Create VIRTQ using DevX API. 1809 * 1810 * @param[in] ctx 1811 * Context returned from mlx5 open_device() glue function. 1812 * @param [in] attr 1813 * Pointer to VIRTQ attributes structure. 1814 * 1815 * @return 1816 * The DevX object created, NULL otherwise and rte_errno is set. 1817 */ 1818 struct mlx5_devx_obj * 1819 mlx5_devx_cmd_create_virtq(void *ctx, 1820 struct mlx5_devx_virtq_attr *attr) 1821 { 1822 uint32_t in[MLX5_ST_SZ_DW(create_virtq_in)] = {0}; 1823 uint32_t out[MLX5_ST_SZ_DW(general_obj_out_cmd_hdr)] = {0}; 1824 struct mlx5_devx_obj *virtq_obj = mlx5_malloc(MLX5_MEM_ZERO, 1825 sizeof(*virtq_obj), 1826 0, SOCKET_ID_ANY); 1827 void *virtq = MLX5_ADDR_OF(create_virtq_in, in, virtq); 1828 void *hdr = MLX5_ADDR_OF(create_virtq_in, in, hdr); 1829 void *virtctx = MLX5_ADDR_OF(virtio_net_q, virtq, virtio_q_context); 1830 1831 if (!virtq_obj) { 1832 DRV_LOG(ERR, "Failed to allocate virtq data."); 1833 rte_errno = ENOMEM; 1834 return NULL; 1835 } 1836 MLX5_SET(general_obj_in_cmd_hdr, hdr, opcode, 1837 MLX5_CMD_OP_CREATE_GENERAL_OBJECT); 1838 MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_type, 1839 MLX5_GENERAL_OBJ_TYPE_VIRTQ); 1840 MLX5_SET16(virtio_net_q, virtq, hw_available_index, 1841 attr->hw_available_index); 1842 MLX5_SET16(virtio_net_q, virtq, hw_used_index, attr->hw_used_index); 1843 MLX5_SET16(virtio_net_q, virtq, tso_ipv4, attr->tso_ipv4); 1844 MLX5_SET16(virtio_net_q, virtq, tso_ipv6, attr->tso_ipv6); 1845 MLX5_SET16(virtio_net_q, virtq, tx_csum, attr->tx_csum); 1846 MLX5_SET16(virtio_net_q, virtq, rx_csum, attr->rx_csum); 1847 MLX5_SET16(virtio_q, virtctx, virtio_version_1_0, 1848 attr->virtio_version_1_0); 1849 MLX5_SET16(virtio_q, virtctx, event_mode, attr->event_mode); 1850 MLX5_SET(virtio_q, virtctx, event_qpn_or_msix, attr->qp_id); 1851 MLX5_SET64(virtio_q, virtctx, desc_addr, attr->desc_addr); 1852 MLX5_SET64(virtio_q, virtctx, used_addr, attr->used_addr); 1853 MLX5_SET64(virtio_q, virtctx, available_addr, attr->available_addr); 1854 MLX5_SET16(virtio_q, virtctx, queue_index, attr->queue_index); 1855 MLX5_SET16(virtio_q, virtctx, queue_size, attr->q_size); 1856 MLX5_SET(virtio_q, virtctx, virtio_q_mkey, attr->mkey); 1857 MLX5_SET(virtio_q, virtctx, umem_1_id, attr->umems[0].id); 1858 MLX5_SET(virtio_q, virtctx, umem_1_size, attr->umems[0].size); 1859 MLX5_SET64(virtio_q, virtctx, umem_1_offset, attr->umems[0].offset); 1860 MLX5_SET(virtio_q, virtctx, umem_2_id, attr->umems[1].id); 1861 MLX5_SET(virtio_q, virtctx, umem_2_size, attr->umems[1].size); 1862 MLX5_SET64(virtio_q, virtctx, umem_2_offset, attr->umems[1].offset); 1863 MLX5_SET(virtio_q, virtctx, umem_3_id, attr->umems[2].id); 1864 MLX5_SET(virtio_q, virtctx, umem_3_size, attr->umems[2].size); 1865 MLX5_SET64(virtio_q, virtctx, umem_3_offset, attr->umems[2].offset); 1866 MLX5_SET(virtio_q, virtctx, counter_set_id, attr->counters_obj_id); 1867 MLX5_SET(virtio_q, virtctx, pd, attr->pd); 1868 MLX5_SET(virtio_q, virtctx, queue_period_mode, attr->hw_latency_mode); 1869 MLX5_SET(virtio_q, virtctx, queue_period_us, attr->hw_max_latency_us); 1870 MLX5_SET(virtio_q, virtctx, queue_max_count, attr->hw_max_pending_comp); 1871 MLX5_SET(virtio_net_q, virtq, tisn_or_qpn, attr->tis_id); 1872 virtq_obj->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), out, 1873 sizeof(out)); 1874 if (!virtq_obj->obj) { 1875 rte_errno = errno; 1876 DRV_LOG(ERR, "Failed to create VIRTQ Obj using DevX."); 1877 mlx5_free(virtq_obj); 1878 return NULL; 1879 } 1880 virtq_obj->id = MLX5_GET(general_obj_out_cmd_hdr, out, obj_id); 1881 return virtq_obj; 1882 } 1883 1884 /** 1885 * Modify VIRTQ using DevX API. 1886 * 1887 * @param[in] virtq_obj 1888 * Pointer to virtq object structure. 1889 * @param [in] attr 1890 * Pointer to modify virtq attributes structure. 1891 * 1892 * @return 1893 * 0 on success, a negative errno value otherwise and rte_errno is set. 1894 */ 1895 int 1896 mlx5_devx_cmd_modify_virtq(struct mlx5_devx_obj *virtq_obj, 1897 struct mlx5_devx_virtq_attr *attr) 1898 { 1899 uint32_t in[MLX5_ST_SZ_DW(create_virtq_in)] = {0}; 1900 uint32_t out[MLX5_ST_SZ_DW(general_obj_out_cmd_hdr)] = {0}; 1901 void *virtq = MLX5_ADDR_OF(create_virtq_in, in, virtq); 1902 void *hdr = MLX5_ADDR_OF(create_virtq_in, in, hdr); 1903 void *virtctx = MLX5_ADDR_OF(virtio_net_q, virtq, virtio_q_context); 1904 int ret; 1905 1906 MLX5_SET(general_obj_in_cmd_hdr, hdr, opcode, 1907 MLX5_CMD_OP_MODIFY_GENERAL_OBJECT); 1908 MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_type, 1909 MLX5_GENERAL_OBJ_TYPE_VIRTQ); 1910 MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_id, virtq_obj->id); 1911 MLX5_SET64(virtio_net_q, virtq, modify_field_select, attr->type); 1912 MLX5_SET16(virtio_q, virtctx, queue_index, attr->queue_index); 1913 switch (attr->type) { 1914 case MLX5_VIRTQ_MODIFY_TYPE_STATE: 1915 MLX5_SET16(virtio_net_q, virtq, state, attr->state); 1916 break; 1917 case MLX5_VIRTQ_MODIFY_TYPE_DIRTY_BITMAP_PARAMS: 1918 MLX5_SET(virtio_net_q, virtq, dirty_bitmap_mkey, 1919 attr->dirty_bitmap_mkey); 1920 MLX5_SET64(virtio_net_q, virtq, dirty_bitmap_addr, 1921 attr->dirty_bitmap_addr); 1922 MLX5_SET(virtio_net_q, virtq, dirty_bitmap_size, 1923 attr->dirty_bitmap_size); 1924 break; 1925 case MLX5_VIRTQ_MODIFY_TYPE_DIRTY_BITMAP_DUMP_ENABLE: 1926 MLX5_SET(virtio_net_q, virtq, dirty_bitmap_dump_enable, 1927 attr->dirty_bitmap_dump_enable); 1928 break; 1929 default: 1930 rte_errno = EINVAL; 1931 return -rte_errno; 1932 } 1933 ret = mlx5_glue->devx_obj_modify(virtq_obj->obj, in, sizeof(in), 1934 out, sizeof(out)); 1935 if (ret) { 1936 DRV_LOG(ERR, "Failed to modify VIRTQ using DevX."); 1937 rte_errno = errno; 1938 return -rte_errno; 1939 } 1940 return ret; 1941 } 1942 1943 /** 1944 * Query VIRTQ using DevX API. 1945 * 1946 * @param[in] virtq_obj 1947 * Pointer to virtq object structure. 1948 * @param [in/out] attr 1949 * Pointer to virtq attributes structure. 1950 * 1951 * @return 1952 * 0 on success, a negative errno value otherwise and rte_errno is set. 1953 */ 1954 int 1955 mlx5_devx_cmd_query_virtq(struct mlx5_devx_obj *virtq_obj, 1956 struct mlx5_devx_virtq_attr *attr) 1957 { 1958 uint32_t in[MLX5_ST_SZ_DW(general_obj_in_cmd_hdr)] = {0}; 1959 uint32_t out[MLX5_ST_SZ_DW(query_virtq_out)] = {0}; 1960 void *hdr = MLX5_ADDR_OF(query_virtq_out, in, hdr); 1961 void *virtq = MLX5_ADDR_OF(query_virtq_out, out, virtq); 1962 int ret; 1963 1964 MLX5_SET(general_obj_in_cmd_hdr, hdr, opcode, 1965 MLX5_CMD_OP_QUERY_GENERAL_OBJECT); 1966 MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_type, 1967 MLX5_GENERAL_OBJ_TYPE_VIRTQ); 1968 MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_id, virtq_obj->id); 1969 ret = mlx5_glue->devx_obj_query(virtq_obj->obj, in, sizeof(in), 1970 out, sizeof(out)); 1971 if (ret) { 1972 DRV_LOG(ERR, "Failed to modify VIRTQ using DevX."); 1973 rte_errno = errno; 1974 return -errno; 1975 } 1976 attr->hw_available_index = MLX5_GET16(virtio_net_q, virtq, 1977 hw_available_index); 1978 attr->hw_used_index = MLX5_GET16(virtio_net_q, virtq, hw_used_index); 1979 attr->state = MLX5_GET16(virtio_net_q, virtq, state); 1980 attr->error_type = MLX5_GET16(virtio_net_q, virtq, 1981 virtio_q_context.error_type); 1982 return ret; 1983 } 1984 1985 /** 1986 * Create QP using DevX API. 1987 * 1988 * @param[in] ctx 1989 * Context returned from mlx5 open_device() glue function. 1990 * @param [in] attr 1991 * Pointer to QP attributes structure. 1992 * 1993 * @return 1994 * The DevX object created, NULL otherwise and rte_errno is set. 1995 */ 1996 struct mlx5_devx_obj * 1997 mlx5_devx_cmd_create_qp(void *ctx, 1998 struct mlx5_devx_qp_attr *attr) 1999 { 2000 uint32_t in[MLX5_ST_SZ_DW(create_qp_in)] = {0}; 2001 uint32_t out[MLX5_ST_SZ_DW(create_qp_out)] = {0}; 2002 struct mlx5_devx_obj *qp_obj = mlx5_malloc(MLX5_MEM_ZERO, 2003 sizeof(*qp_obj), 2004 0, SOCKET_ID_ANY); 2005 void *qpc = MLX5_ADDR_OF(create_qp_in, in, qpc); 2006 2007 if (!qp_obj) { 2008 DRV_LOG(ERR, "Failed to allocate QP data."); 2009 rte_errno = ENOMEM; 2010 return NULL; 2011 } 2012 MLX5_SET(create_qp_in, in, opcode, MLX5_CMD_OP_CREATE_QP); 2013 MLX5_SET(qpc, qpc, st, MLX5_QP_ST_RC); 2014 MLX5_SET(qpc, qpc, pd, attr->pd); 2015 MLX5_SET(qpc, qpc, ts_format, attr->ts_format); 2016 if (attr->uar_index) { 2017 MLX5_SET(qpc, qpc, pm_state, MLX5_QP_PM_MIGRATED); 2018 MLX5_SET(qpc, qpc, uar_page, attr->uar_index); 2019 if (attr->log_page_size > MLX5_ADAPTER_PAGE_SHIFT) 2020 MLX5_SET(qpc, qpc, log_page_size, 2021 attr->log_page_size - MLX5_ADAPTER_PAGE_SHIFT); 2022 if (attr->sq_size) { 2023 MLX5_ASSERT(RTE_IS_POWER_OF_2(attr->sq_size)); 2024 MLX5_SET(qpc, qpc, cqn_snd, attr->cqn); 2025 MLX5_SET(qpc, qpc, log_sq_size, 2026 rte_log2_u32(attr->sq_size)); 2027 } else { 2028 MLX5_SET(qpc, qpc, no_sq, 1); 2029 } 2030 if (attr->rq_size) { 2031 MLX5_ASSERT(RTE_IS_POWER_OF_2(attr->rq_size)); 2032 MLX5_SET(qpc, qpc, cqn_rcv, attr->cqn); 2033 MLX5_SET(qpc, qpc, log_rq_stride, attr->log_rq_stride - 2034 MLX5_LOG_RQ_STRIDE_SHIFT); 2035 MLX5_SET(qpc, qpc, log_rq_size, 2036 rte_log2_u32(attr->rq_size)); 2037 MLX5_SET(qpc, qpc, rq_type, MLX5_NON_ZERO_RQ); 2038 } else { 2039 MLX5_SET(qpc, qpc, rq_type, MLX5_ZERO_LEN_RQ); 2040 } 2041 if (attr->dbr_umem_valid) { 2042 MLX5_SET(qpc, qpc, dbr_umem_valid, 2043 attr->dbr_umem_valid); 2044 MLX5_SET(qpc, qpc, dbr_umem_id, attr->dbr_umem_id); 2045 } 2046 MLX5_SET64(qpc, qpc, dbr_addr, attr->dbr_address); 2047 MLX5_SET64(create_qp_in, in, wq_umem_offset, 2048 attr->wq_umem_offset); 2049 MLX5_SET(create_qp_in, in, wq_umem_id, attr->wq_umem_id); 2050 MLX5_SET(create_qp_in, in, wq_umem_valid, 1); 2051 } else { 2052 /* Special QP to be managed by FW - no SQ\RQ\CQ\UAR\DB rec. */ 2053 MLX5_SET(qpc, qpc, rq_type, MLX5_ZERO_LEN_RQ); 2054 MLX5_SET(qpc, qpc, no_sq, 1); 2055 } 2056 qp_obj->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), out, 2057 sizeof(out)); 2058 if (!qp_obj->obj) { 2059 rte_errno = errno; 2060 DRV_LOG(ERR, "Failed to create QP Obj using DevX."); 2061 mlx5_free(qp_obj); 2062 return NULL; 2063 } 2064 qp_obj->id = MLX5_GET(create_qp_out, out, qpn); 2065 return qp_obj; 2066 } 2067 2068 /** 2069 * Modify QP using DevX API. 2070 * Currently supports only force loop-back QP. 2071 * 2072 * @param[in] qp 2073 * Pointer to QP object structure. 2074 * @param [in] qp_st_mod_op 2075 * The QP state modification operation. 2076 * @param [in] remote_qp_id 2077 * The remote QP ID for MLX5_CMD_OP_INIT2RTR_QP operation. 2078 * 2079 * @return 2080 * 0 on success, a negative errno value otherwise and rte_errno is set. 2081 */ 2082 int 2083 mlx5_devx_cmd_modify_qp_state(struct mlx5_devx_obj *qp, uint32_t qp_st_mod_op, 2084 uint32_t remote_qp_id) 2085 { 2086 union { 2087 uint32_t rst2init[MLX5_ST_SZ_DW(rst2init_qp_in)]; 2088 uint32_t init2rtr[MLX5_ST_SZ_DW(init2rtr_qp_in)]; 2089 uint32_t rtr2rts[MLX5_ST_SZ_DW(rtr2rts_qp_in)]; 2090 } in; 2091 union { 2092 uint32_t rst2init[MLX5_ST_SZ_DW(rst2init_qp_out)]; 2093 uint32_t init2rtr[MLX5_ST_SZ_DW(init2rtr_qp_out)]; 2094 uint32_t rtr2rts[MLX5_ST_SZ_DW(rtr2rts_qp_out)]; 2095 } out; 2096 void *qpc; 2097 int ret; 2098 unsigned int inlen; 2099 unsigned int outlen; 2100 2101 memset(&in, 0, sizeof(in)); 2102 memset(&out, 0, sizeof(out)); 2103 MLX5_SET(rst2init_qp_in, &in, opcode, qp_st_mod_op); 2104 switch (qp_st_mod_op) { 2105 case MLX5_CMD_OP_RST2INIT_QP: 2106 MLX5_SET(rst2init_qp_in, &in, qpn, qp->id); 2107 qpc = MLX5_ADDR_OF(rst2init_qp_in, &in, qpc); 2108 MLX5_SET(qpc, qpc, primary_address_path.vhca_port_num, 1); 2109 MLX5_SET(qpc, qpc, rre, 1); 2110 MLX5_SET(qpc, qpc, rwe, 1); 2111 MLX5_SET(qpc, qpc, pm_state, MLX5_QP_PM_MIGRATED); 2112 inlen = sizeof(in.rst2init); 2113 outlen = sizeof(out.rst2init); 2114 break; 2115 case MLX5_CMD_OP_INIT2RTR_QP: 2116 MLX5_SET(init2rtr_qp_in, &in, qpn, qp->id); 2117 qpc = MLX5_ADDR_OF(init2rtr_qp_in, &in, qpc); 2118 MLX5_SET(qpc, qpc, primary_address_path.fl, 1); 2119 MLX5_SET(qpc, qpc, primary_address_path.vhca_port_num, 1); 2120 MLX5_SET(qpc, qpc, mtu, 1); 2121 MLX5_SET(qpc, qpc, log_msg_max, 30); 2122 MLX5_SET(qpc, qpc, remote_qpn, remote_qp_id); 2123 MLX5_SET(qpc, qpc, min_rnr_nak, 0); 2124 inlen = sizeof(in.init2rtr); 2125 outlen = sizeof(out.init2rtr); 2126 break; 2127 case MLX5_CMD_OP_RTR2RTS_QP: 2128 qpc = MLX5_ADDR_OF(rtr2rts_qp_in, &in, qpc); 2129 MLX5_SET(rtr2rts_qp_in, &in, qpn, qp->id); 2130 MLX5_SET(qpc, qpc, primary_address_path.ack_timeout, 14); 2131 MLX5_SET(qpc, qpc, log_ack_req_freq, 0); 2132 MLX5_SET(qpc, qpc, retry_count, 7); 2133 MLX5_SET(qpc, qpc, rnr_retry, 7); 2134 inlen = sizeof(in.rtr2rts); 2135 outlen = sizeof(out.rtr2rts); 2136 break; 2137 default: 2138 DRV_LOG(ERR, "Invalid or unsupported QP modify op %u.", 2139 qp_st_mod_op); 2140 rte_errno = EINVAL; 2141 return -rte_errno; 2142 } 2143 ret = mlx5_glue->devx_obj_modify(qp->obj, &in, inlen, &out, outlen); 2144 if (ret) { 2145 DRV_LOG(ERR, "Failed to modify QP using DevX."); 2146 rte_errno = errno; 2147 return -rte_errno; 2148 } 2149 return ret; 2150 } 2151 2152 struct mlx5_devx_obj * 2153 mlx5_devx_cmd_create_virtio_q_counters(void *ctx) 2154 { 2155 uint32_t in[MLX5_ST_SZ_DW(create_virtio_q_counters_in)] = {0}; 2156 uint32_t out[MLX5_ST_SZ_DW(general_obj_out_cmd_hdr)] = {0}; 2157 struct mlx5_devx_obj *couners_obj = mlx5_malloc(MLX5_MEM_ZERO, 2158 sizeof(*couners_obj), 0, 2159 SOCKET_ID_ANY); 2160 void *hdr = MLX5_ADDR_OF(create_virtio_q_counters_in, in, hdr); 2161 2162 if (!couners_obj) { 2163 DRV_LOG(ERR, "Failed to allocate virtio queue counters data."); 2164 rte_errno = ENOMEM; 2165 return NULL; 2166 } 2167 MLX5_SET(general_obj_in_cmd_hdr, hdr, opcode, 2168 MLX5_CMD_OP_CREATE_GENERAL_OBJECT); 2169 MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_type, 2170 MLX5_GENERAL_OBJ_TYPE_VIRTIO_Q_COUNTERS); 2171 couners_obj->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), out, 2172 sizeof(out)); 2173 if (!couners_obj->obj) { 2174 rte_errno = errno; 2175 DRV_LOG(ERR, "Failed to create virtio queue counters Obj using" 2176 " DevX."); 2177 mlx5_free(couners_obj); 2178 return NULL; 2179 } 2180 couners_obj->id = MLX5_GET(general_obj_out_cmd_hdr, out, obj_id); 2181 return couners_obj; 2182 } 2183 2184 int 2185 mlx5_devx_cmd_query_virtio_q_counters(struct mlx5_devx_obj *couners_obj, 2186 struct mlx5_devx_virtio_q_couners_attr *attr) 2187 { 2188 uint32_t in[MLX5_ST_SZ_DW(general_obj_in_cmd_hdr)] = {0}; 2189 uint32_t out[MLX5_ST_SZ_DW(query_virtio_q_counters_out)] = {0}; 2190 void *hdr = MLX5_ADDR_OF(query_virtio_q_counters_out, in, hdr); 2191 void *virtio_q_counters = MLX5_ADDR_OF(query_virtio_q_counters_out, out, 2192 virtio_q_counters); 2193 int ret; 2194 2195 MLX5_SET(general_obj_in_cmd_hdr, hdr, opcode, 2196 MLX5_CMD_OP_QUERY_GENERAL_OBJECT); 2197 MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_type, 2198 MLX5_GENERAL_OBJ_TYPE_VIRTIO_Q_COUNTERS); 2199 MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_id, couners_obj->id); 2200 ret = mlx5_glue->devx_obj_query(couners_obj->obj, in, sizeof(in), out, 2201 sizeof(out)); 2202 if (ret) { 2203 DRV_LOG(ERR, "Failed to query virtio q counters using DevX."); 2204 rte_errno = errno; 2205 return -errno; 2206 } 2207 attr->received_desc = MLX5_GET64(virtio_q_counters, virtio_q_counters, 2208 received_desc); 2209 attr->completed_desc = MLX5_GET64(virtio_q_counters, virtio_q_counters, 2210 completed_desc); 2211 attr->error_cqes = MLX5_GET(virtio_q_counters, virtio_q_counters, 2212 error_cqes); 2213 attr->bad_desc_errors = MLX5_GET(virtio_q_counters, virtio_q_counters, 2214 bad_desc_errors); 2215 attr->exceed_max_chain = MLX5_GET(virtio_q_counters, virtio_q_counters, 2216 exceed_max_chain); 2217 attr->invalid_buffer = MLX5_GET(virtio_q_counters, virtio_q_counters, 2218 invalid_buffer); 2219 return ret; 2220 } 2221 2222 /** 2223 * Create general object of type FLOW_HIT_ASO using DevX API. 2224 * 2225 * @param[in] ctx 2226 * Context returned from mlx5 open_device() glue function. 2227 * @param [in] pd 2228 * PD value to associate the FLOW_HIT_ASO object with. 2229 * 2230 * @return 2231 * The DevX object created, NULL otherwise and rte_errno is set. 2232 */ 2233 struct mlx5_devx_obj * 2234 mlx5_devx_cmd_create_flow_hit_aso_obj(void *ctx, uint32_t pd) 2235 { 2236 uint32_t in[MLX5_ST_SZ_DW(create_flow_hit_aso_in)] = {0}; 2237 uint32_t out[MLX5_ST_SZ_DW(general_obj_out_cmd_hdr)] = {0}; 2238 struct mlx5_devx_obj *flow_hit_aso_obj = NULL; 2239 void *ptr = NULL; 2240 2241 flow_hit_aso_obj = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*flow_hit_aso_obj), 2242 0, SOCKET_ID_ANY); 2243 if (!flow_hit_aso_obj) { 2244 DRV_LOG(ERR, "Failed to allocate FLOW_HIT_ASO object data"); 2245 rte_errno = ENOMEM; 2246 return NULL; 2247 } 2248 ptr = MLX5_ADDR_OF(create_flow_hit_aso_in, in, hdr); 2249 MLX5_SET(general_obj_in_cmd_hdr, ptr, opcode, 2250 MLX5_CMD_OP_CREATE_GENERAL_OBJECT); 2251 MLX5_SET(general_obj_in_cmd_hdr, ptr, obj_type, 2252 MLX5_GENERAL_OBJ_TYPE_FLOW_HIT_ASO); 2253 ptr = MLX5_ADDR_OF(create_flow_hit_aso_in, in, flow_hit_aso); 2254 MLX5_SET(flow_hit_aso, ptr, access_pd, pd); 2255 flow_hit_aso_obj->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), 2256 out, sizeof(out)); 2257 if (!flow_hit_aso_obj->obj) { 2258 rte_errno = errno; 2259 DRV_LOG(ERR, "Failed to create FLOW_HIT_ASO obj using DevX."); 2260 mlx5_free(flow_hit_aso_obj); 2261 return NULL; 2262 } 2263 flow_hit_aso_obj->id = MLX5_GET(general_obj_out_cmd_hdr, out, obj_id); 2264 return flow_hit_aso_obj; 2265 } 2266 2267 /* 2268 * Create PD using DevX API. 2269 * 2270 * @param[in] ctx 2271 * Context returned from mlx5 open_device() glue function. 2272 * 2273 * @return 2274 * The DevX object created, NULL otherwise and rte_errno is set. 2275 */ 2276 struct mlx5_devx_obj * 2277 mlx5_devx_cmd_alloc_pd(void *ctx) 2278 { 2279 struct mlx5_devx_obj *ppd = 2280 mlx5_malloc(MLX5_MEM_ZERO, sizeof(*ppd), 0, SOCKET_ID_ANY); 2281 u32 in[MLX5_ST_SZ_DW(alloc_pd_in)] = {0}; 2282 u32 out[MLX5_ST_SZ_DW(alloc_pd_out)] = {0}; 2283 2284 if (!ppd) { 2285 DRV_LOG(ERR, "Failed to allocate PD data."); 2286 rte_errno = ENOMEM; 2287 return NULL; 2288 } 2289 MLX5_SET(alloc_pd_in, in, opcode, MLX5_CMD_OP_ALLOC_PD); 2290 ppd->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), 2291 out, sizeof(out)); 2292 if (!ppd->obj) { 2293 mlx5_free(ppd); 2294 DRV_LOG(ERR, "Failed to allocate PD Obj using DevX."); 2295 rte_errno = errno; 2296 return NULL; 2297 } 2298 ppd->id = MLX5_GET(alloc_pd_out, out, pd); 2299 return ppd; 2300 } 2301 2302 /** 2303 * Create general object of type FLOW_METER_ASO using DevX API. 2304 * 2305 * @param[in] ctx 2306 * Context returned from mlx5 open_device() glue function. 2307 * @param [in] pd 2308 * PD value to associate the FLOW_METER_ASO object with. 2309 * @param [in] log_obj_size 2310 * log_obj_size define to allocate number of 2 * meters 2311 * in one FLOW_METER_ASO object. 2312 * 2313 * @return 2314 * The DevX object created, NULL otherwise and rte_errno is set. 2315 */ 2316 struct mlx5_devx_obj * 2317 mlx5_devx_cmd_create_flow_meter_aso_obj(void *ctx, uint32_t pd, 2318 uint32_t log_obj_size) 2319 { 2320 uint32_t in[MLX5_ST_SZ_DW(create_flow_meter_aso_in)] = {0}; 2321 uint32_t out[MLX5_ST_SZ_DW(general_obj_out_cmd_hdr)]; 2322 struct mlx5_devx_obj *flow_meter_aso_obj; 2323 void *ptr; 2324 2325 flow_meter_aso_obj = mlx5_malloc(MLX5_MEM_ZERO, 2326 sizeof(*flow_meter_aso_obj), 2327 0, SOCKET_ID_ANY); 2328 if (!flow_meter_aso_obj) { 2329 DRV_LOG(ERR, "Failed to allocate FLOW_METER_ASO object data"); 2330 rte_errno = ENOMEM; 2331 return NULL; 2332 } 2333 ptr = MLX5_ADDR_OF(create_flow_meter_aso_in, in, hdr); 2334 MLX5_SET(general_obj_in_cmd_hdr, ptr, opcode, 2335 MLX5_CMD_OP_CREATE_GENERAL_OBJECT); 2336 MLX5_SET(general_obj_in_cmd_hdr, ptr, obj_type, 2337 MLX5_GENERAL_OBJ_TYPE_FLOW_METER_ASO); 2338 MLX5_SET(general_obj_in_cmd_hdr, ptr, log_obj_range, 2339 log_obj_size); 2340 ptr = MLX5_ADDR_OF(create_flow_meter_aso_in, in, flow_meter_aso); 2341 MLX5_SET(flow_meter_aso, ptr, access_pd, pd); 2342 flow_meter_aso_obj->obj = mlx5_glue->devx_obj_create( 2343 ctx, in, sizeof(in), 2344 out, sizeof(out)); 2345 if (!flow_meter_aso_obj->obj) { 2346 rte_errno = errno; 2347 DRV_LOG(ERR, "Failed to create FLOW_METER_ASO obj using DevX."); 2348 mlx5_free(flow_meter_aso_obj); 2349 return NULL; 2350 } 2351 flow_meter_aso_obj->id = MLX5_GET(general_obj_out_cmd_hdr, 2352 out, obj_id); 2353 return flow_meter_aso_obj; 2354 } 2355 2356 /* 2357 * Create general object of type CONN_TRACK_OFFLOAD using DevX API. 2358 * 2359 * @param[in] ctx 2360 * Context returned from mlx5 open_device() glue function. 2361 * @param [in] pd 2362 * PD value to associate the CONN_TRACK_OFFLOAD ASO object with. 2363 * @param [in] log_obj_size 2364 * log_obj_size to allocate its power of 2 * objects 2365 * in one CONN_TRACK_OFFLOAD bulk allocation. 2366 * 2367 * @return 2368 * The DevX object created, NULL otherwise and rte_errno is set. 2369 */ 2370 struct mlx5_devx_obj * 2371 mlx5_devx_cmd_create_conn_track_offload_obj(void *ctx, uint32_t pd, 2372 uint32_t log_obj_size) 2373 { 2374 uint32_t in[MLX5_ST_SZ_DW(create_conn_track_aso_in)] = {0}; 2375 uint32_t out[MLX5_ST_SZ_DW(general_obj_out_cmd_hdr)]; 2376 struct mlx5_devx_obj *ct_aso_obj; 2377 void *ptr; 2378 2379 ct_aso_obj = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*ct_aso_obj), 2380 0, SOCKET_ID_ANY); 2381 if (!ct_aso_obj) { 2382 DRV_LOG(ERR, "Failed to allocate CONN_TRACK_OFFLOAD object."); 2383 rte_errno = ENOMEM; 2384 return NULL; 2385 } 2386 ptr = MLX5_ADDR_OF(create_conn_track_aso_in, in, hdr); 2387 MLX5_SET(general_obj_in_cmd_hdr, ptr, opcode, 2388 MLX5_CMD_OP_CREATE_GENERAL_OBJECT); 2389 MLX5_SET(general_obj_in_cmd_hdr, ptr, obj_type, 2390 MLX5_GENERAL_OBJ_TYPE_CONN_TRACK_OFFLOAD); 2391 MLX5_SET(general_obj_in_cmd_hdr, ptr, log_obj_range, log_obj_size); 2392 ptr = MLX5_ADDR_OF(create_conn_track_aso_in, in, conn_track_offload); 2393 MLX5_SET(conn_track_offload, ptr, conn_track_aso_access_pd, pd); 2394 ct_aso_obj->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), 2395 out, sizeof(out)); 2396 if (!ct_aso_obj->obj) { 2397 rte_errno = errno; 2398 DRV_LOG(ERR, "Failed to create CONN_TRACK_OFFLOAD obj by using DevX."); 2399 mlx5_free(ct_aso_obj); 2400 return NULL; 2401 } 2402 ct_aso_obj->id = MLX5_GET(general_obj_out_cmd_hdr, out, obj_id); 2403 return ct_aso_obj; 2404 } 2405 2406 /** 2407 * Create general object of type GENEVE TLV option using DevX API. 2408 * 2409 * @param[in] ctx 2410 * Context returned from mlx5 open_device() glue function. 2411 * @param [in] class 2412 * TLV option variable value of class 2413 * @param [in] type 2414 * TLV option variable value of type 2415 * @param [in] len 2416 * TLV option variable value of len 2417 * 2418 * @return 2419 * The DevX object created, NULL otherwise and rte_errno is set. 2420 */ 2421 struct mlx5_devx_obj * 2422 mlx5_devx_cmd_create_geneve_tlv_option(void *ctx, 2423 uint16_t class, uint8_t type, uint8_t len) 2424 { 2425 uint32_t in[MLX5_ST_SZ_DW(create_geneve_tlv_option_in)] = {0}; 2426 uint32_t out[MLX5_ST_SZ_DW(general_obj_out_cmd_hdr)] = {0}; 2427 struct mlx5_devx_obj *geneve_tlv_opt_obj = mlx5_malloc(MLX5_MEM_ZERO, 2428 sizeof(*geneve_tlv_opt_obj), 2429 0, SOCKET_ID_ANY); 2430 2431 if (!geneve_tlv_opt_obj) { 2432 DRV_LOG(ERR, "Failed to allocate geneve tlv option object."); 2433 rte_errno = ENOMEM; 2434 return NULL; 2435 } 2436 void *hdr = MLX5_ADDR_OF(create_geneve_tlv_option_in, in, hdr); 2437 void *opt = MLX5_ADDR_OF(create_geneve_tlv_option_in, in, 2438 geneve_tlv_opt); 2439 MLX5_SET(general_obj_in_cmd_hdr, hdr, opcode, 2440 MLX5_CMD_OP_CREATE_GENERAL_OBJECT); 2441 MLX5_SET(general_obj_in_cmd_hdr, hdr, obj_type, 2442 MLX5_GENERAL_OBJ_TYPE_GENEVE_TLV_OPT); 2443 MLX5_SET(geneve_tlv_option, opt, option_class, 2444 rte_be_to_cpu_16(class)); 2445 MLX5_SET(geneve_tlv_option, opt, option_type, type); 2446 MLX5_SET(geneve_tlv_option, opt, option_data_length, len); 2447 geneve_tlv_opt_obj->obj = mlx5_glue->devx_obj_create(ctx, in, 2448 sizeof(in), out, sizeof(out)); 2449 if (!geneve_tlv_opt_obj->obj) { 2450 rte_errno = errno; 2451 DRV_LOG(ERR, "Failed to create Geneve tlv option " 2452 "Obj using DevX."); 2453 mlx5_free(geneve_tlv_opt_obj); 2454 return NULL; 2455 } 2456 geneve_tlv_opt_obj->id = MLX5_GET(general_obj_out_cmd_hdr, out, obj_id); 2457 return geneve_tlv_opt_obj; 2458 } 2459 2460 int 2461 mlx5_devx_cmd_wq_query(void *wq, uint32_t *counter_set_id) 2462 { 2463 #ifdef HAVE_IBV_FLOW_DV_SUPPORT 2464 uint32_t in[MLX5_ST_SZ_DW(query_rq_in)] = {0}; 2465 uint32_t out[MLX5_ST_SZ_DW(query_rq_out)] = {0}; 2466 int rc; 2467 void *rq_ctx; 2468 2469 MLX5_SET(query_rq_in, in, opcode, MLX5_CMD_OP_QUERY_RQ); 2470 MLX5_SET(query_rq_in, in, rqn, ((struct ibv_wq *)wq)->wq_num); 2471 rc = mlx5_glue->devx_wq_query(wq, in, sizeof(in), out, sizeof(out)); 2472 if (rc) { 2473 rte_errno = errno; 2474 DRV_LOG(ERR, "Failed to query WQ counter set ID using DevX - " 2475 "rc = %d, errno = %d.", rc, errno); 2476 return -rc; 2477 }; 2478 rq_ctx = MLX5_ADDR_OF(query_rq_out, out, rq_context); 2479 *counter_set_id = MLX5_GET(rqc, rq_ctx, counter_set_id); 2480 return 0; 2481 #else 2482 (void)wq; 2483 (void)counter_set_id; 2484 return -ENOTSUP; 2485 #endif 2486 } 2487 2488 /* 2489 * Allocate queue counters via devx interface. 2490 * 2491 * @param[in] ctx 2492 * Context returned from mlx5 open_device() glue function. 2493 * 2494 * @return 2495 * Pointer to counter object on success, a NULL value otherwise and 2496 * rte_errno is set. 2497 */ 2498 struct mlx5_devx_obj * 2499 mlx5_devx_cmd_queue_counter_alloc(void *ctx) 2500 { 2501 struct mlx5_devx_obj *dcs = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*dcs), 0, 2502 SOCKET_ID_ANY); 2503 uint32_t in[MLX5_ST_SZ_DW(alloc_q_counter_in)] = {0}; 2504 uint32_t out[MLX5_ST_SZ_DW(alloc_q_counter_out)] = {0}; 2505 2506 if (!dcs) { 2507 rte_errno = ENOMEM; 2508 return NULL; 2509 } 2510 MLX5_SET(alloc_q_counter_in, in, opcode, MLX5_CMD_OP_ALLOC_Q_COUNTER); 2511 dcs->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), out, 2512 sizeof(out)); 2513 if (!dcs->obj) { 2514 DRV_LOG(DEBUG, "Can't allocate q counter set by DevX - error " 2515 "%d.", errno); 2516 rte_errno = errno; 2517 mlx5_free(dcs); 2518 return NULL; 2519 } 2520 dcs->id = MLX5_GET(alloc_q_counter_out, out, counter_set_id); 2521 return dcs; 2522 } 2523 2524 /** 2525 * Query queue counters values. 2526 * 2527 * @param[in] dcs 2528 * devx object of the queue counter set. 2529 * @param[in] clear 2530 * Whether hardware should clear the counters after the query or not. 2531 * @param[out] out_of_buffers 2532 * Number of dropped occurred due to lack of WQE for the associated QPs/RQs. 2533 * 2534 * @return 2535 * 0 on success, a negative value otherwise. 2536 */ 2537 int 2538 mlx5_devx_cmd_queue_counter_query(struct mlx5_devx_obj *dcs, int clear, 2539 uint32_t *out_of_buffers) 2540 { 2541 uint32_t out[MLX5_ST_SZ_BYTES(query_q_counter_out)] = {0}; 2542 uint32_t in[MLX5_ST_SZ_DW(query_q_counter_in)] = {0}; 2543 int rc; 2544 2545 MLX5_SET(query_q_counter_in, in, opcode, 2546 MLX5_CMD_OP_QUERY_Q_COUNTER); 2547 MLX5_SET(query_q_counter_in, in, op_mod, 0); 2548 MLX5_SET(query_q_counter_in, in, counter_set_id, dcs->id); 2549 MLX5_SET(query_q_counter_in, in, clear, !!clear); 2550 rc = mlx5_glue->devx_obj_query(dcs->obj, in, sizeof(in), out, 2551 sizeof(out)); 2552 if (rc) { 2553 DRV_LOG(ERR, "Failed to query devx q counter set - rc %d", rc); 2554 rte_errno = rc; 2555 return -rc; 2556 } 2557 *out_of_buffers = MLX5_GET(query_q_counter_out, out, out_of_buffer); 2558 return 0; 2559 } 2560 2561 /** 2562 * Create general object of type DEK using DevX API. 2563 * 2564 * @param[in] ctx 2565 * Context returned from mlx5 open_device() glue function. 2566 * @param [in] attr 2567 * Pointer to DEK attributes structure. 2568 * 2569 * @return 2570 * The DevX object created, NULL otherwise and rte_errno is set. 2571 */ 2572 struct mlx5_devx_obj * 2573 mlx5_devx_cmd_create_dek_obj(void *ctx, struct mlx5_devx_dek_attr *attr) 2574 { 2575 uint32_t in[MLX5_ST_SZ_DW(create_dek_in)] = {0}; 2576 uint32_t out[MLX5_ST_SZ_DW(general_obj_out_cmd_hdr)] = {0}; 2577 struct mlx5_devx_obj *dek_obj = NULL; 2578 void *ptr = NULL, *key_addr = NULL; 2579 2580 dek_obj = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*dek_obj), 2581 0, SOCKET_ID_ANY); 2582 if (dek_obj == NULL) { 2583 DRV_LOG(ERR, "Failed to allocate DEK object data"); 2584 rte_errno = ENOMEM; 2585 return NULL; 2586 } 2587 ptr = MLX5_ADDR_OF(create_dek_in, in, hdr); 2588 MLX5_SET(general_obj_in_cmd_hdr, ptr, opcode, 2589 MLX5_CMD_OP_CREATE_GENERAL_OBJECT); 2590 MLX5_SET(general_obj_in_cmd_hdr, ptr, obj_type, 2591 MLX5_GENERAL_OBJ_TYPE_DEK); 2592 ptr = MLX5_ADDR_OF(create_dek_in, in, dek); 2593 MLX5_SET(dek, ptr, key_size, attr->key_size); 2594 MLX5_SET(dek, ptr, has_keytag, attr->has_keytag); 2595 MLX5_SET(dek, ptr, key_purpose, attr->key_purpose); 2596 MLX5_SET(dek, ptr, pd, attr->pd); 2597 MLX5_SET64(dek, ptr, opaque, attr->opaque); 2598 key_addr = MLX5_ADDR_OF(dek, ptr, key); 2599 memcpy(key_addr, (void *)(attr->key), MLX5_CRYPTO_KEY_MAX_SIZE); 2600 dek_obj->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), 2601 out, sizeof(out)); 2602 if (dek_obj->obj == NULL) { 2603 rte_errno = errno; 2604 DRV_LOG(ERR, "Failed to create DEK obj using DevX."); 2605 mlx5_free(dek_obj); 2606 return NULL; 2607 } 2608 dek_obj->id = MLX5_GET(general_obj_out_cmd_hdr, out, obj_id); 2609 return dek_obj; 2610 } 2611 2612 /** 2613 * Create general object of type IMPORT_KEK using DevX API. 2614 * 2615 * @param[in] ctx 2616 * Context returned from mlx5 open_device() glue function. 2617 * @param [in] attr 2618 * Pointer to IMPORT_KEK attributes structure. 2619 * 2620 * @return 2621 * The DevX object created, NULL otherwise and rte_errno is set. 2622 */ 2623 struct mlx5_devx_obj * 2624 mlx5_devx_cmd_create_import_kek_obj(void *ctx, 2625 struct mlx5_devx_import_kek_attr *attr) 2626 { 2627 uint32_t in[MLX5_ST_SZ_DW(create_import_kek_in)] = {0}; 2628 uint32_t out[MLX5_ST_SZ_DW(general_obj_out_cmd_hdr)] = {0}; 2629 struct mlx5_devx_obj *import_kek_obj = NULL; 2630 void *ptr = NULL, *key_addr = NULL; 2631 2632 import_kek_obj = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*import_kek_obj), 2633 0, SOCKET_ID_ANY); 2634 if (import_kek_obj == NULL) { 2635 DRV_LOG(ERR, "Failed to allocate IMPORT_KEK object data"); 2636 rte_errno = ENOMEM; 2637 return NULL; 2638 } 2639 ptr = MLX5_ADDR_OF(create_import_kek_in, in, hdr); 2640 MLX5_SET(general_obj_in_cmd_hdr, ptr, opcode, 2641 MLX5_CMD_OP_CREATE_GENERAL_OBJECT); 2642 MLX5_SET(general_obj_in_cmd_hdr, ptr, obj_type, 2643 MLX5_GENERAL_OBJ_TYPE_IMPORT_KEK); 2644 ptr = MLX5_ADDR_OF(create_import_kek_in, in, import_kek); 2645 MLX5_SET(import_kek, ptr, key_size, attr->key_size); 2646 key_addr = MLX5_ADDR_OF(import_kek, ptr, key); 2647 memcpy(key_addr, (void *)(attr->key), MLX5_CRYPTO_KEY_MAX_SIZE); 2648 import_kek_obj->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), 2649 out, sizeof(out)); 2650 if (import_kek_obj->obj == NULL) { 2651 rte_errno = errno; 2652 DRV_LOG(ERR, "Failed to create IMPORT_KEK object using DevX."); 2653 mlx5_free(import_kek_obj); 2654 return NULL; 2655 } 2656 import_kek_obj->id = MLX5_GET(general_obj_out_cmd_hdr, out, obj_id); 2657 return import_kek_obj; 2658 } 2659 2660 /** 2661 * Create general object of type CREDENTIAL using DevX API. 2662 * 2663 * @param[in] ctx 2664 * Context returned from mlx5 open_device() glue function. 2665 * @param [in] attr 2666 * Pointer to CREDENTIAL attributes structure. 2667 * 2668 * @return 2669 * The DevX object created, NULL otherwise and rte_errno is set. 2670 */ 2671 struct mlx5_devx_obj * 2672 mlx5_devx_cmd_create_credential_obj(void *ctx, 2673 struct mlx5_devx_credential_attr *attr) 2674 { 2675 uint32_t in[MLX5_ST_SZ_DW(create_credential_in)] = {0}; 2676 uint32_t out[MLX5_ST_SZ_DW(general_obj_out_cmd_hdr)] = {0}; 2677 struct mlx5_devx_obj *credential_obj = NULL; 2678 void *ptr = NULL, *credential_addr = NULL; 2679 2680 credential_obj = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*credential_obj), 2681 0, SOCKET_ID_ANY); 2682 if (credential_obj == NULL) { 2683 DRV_LOG(ERR, "Failed to allocate CREDENTIAL object data"); 2684 rte_errno = ENOMEM; 2685 return NULL; 2686 } 2687 ptr = MLX5_ADDR_OF(create_credential_in, in, hdr); 2688 MLX5_SET(general_obj_in_cmd_hdr, ptr, opcode, 2689 MLX5_CMD_OP_CREATE_GENERAL_OBJECT); 2690 MLX5_SET(general_obj_in_cmd_hdr, ptr, obj_type, 2691 MLX5_GENERAL_OBJ_TYPE_CREDENTIAL); 2692 ptr = MLX5_ADDR_OF(create_credential_in, in, credential); 2693 MLX5_SET(credential, ptr, credential_role, attr->credential_role); 2694 credential_addr = MLX5_ADDR_OF(credential, ptr, credential); 2695 memcpy(credential_addr, (void *)(attr->credential), 2696 MLX5_CRYPTO_CREDENTIAL_SIZE); 2697 credential_obj->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), 2698 out, sizeof(out)); 2699 if (credential_obj->obj == NULL) { 2700 rte_errno = errno; 2701 DRV_LOG(ERR, "Failed to create CREDENTIAL object using DevX."); 2702 mlx5_free(credential_obj); 2703 return NULL; 2704 } 2705 credential_obj->id = MLX5_GET(general_obj_out_cmd_hdr, out, obj_id); 2706 return credential_obj; 2707 } 2708 2709 /** 2710 * Create general object of type CRYPTO_LOGIN using DevX API. 2711 * 2712 * @param[in] ctx 2713 * Context returned from mlx5 open_device() glue function. 2714 * @param [in] attr 2715 * Pointer to CRYPTO_LOGIN attributes structure. 2716 * 2717 * @return 2718 * The DevX object created, NULL otherwise and rte_errno is set. 2719 */ 2720 struct mlx5_devx_obj * 2721 mlx5_devx_cmd_create_crypto_login_obj(void *ctx, 2722 struct mlx5_devx_crypto_login_attr *attr) 2723 { 2724 uint32_t in[MLX5_ST_SZ_DW(create_crypto_login_in)] = {0}; 2725 uint32_t out[MLX5_ST_SZ_DW(general_obj_out_cmd_hdr)] = {0}; 2726 struct mlx5_devx_obj *crypto_login_obj = NULL; 2727 void *ptr = NULL, *credential_addr = NULL; 2728 2729 crypto_login_obj = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*crypto_login_obj), 2730 0, SOCKET_ID_ANY); 2731 if (crypto_login_obj == NULL) { 2732 DRV_LOG(ERR, "Failed to allocate CRYPTO_LOGIN object data"); 2733 rte_errno = ENOMEM; 2734 return NULL; 2735 } 2736 ptr = MLX5_ADDR_OF(create_crypto_login_in, in, hdr); 2737 MLX5_SET(general_obj_in_cmd_hdr, ptr, opcode, 2738 MLX5_CMD_OP_CREATE_GENERAL_OBJECT); 2739 MLX5_SET(general_obj_in_cmd_hdr, ptr, obj_type, 2740 MLX5_GENERAL_OBJ_TYPE_CRYPTO_LOGIN); 2741 ptr = MLX5_ADDR_OF(create_crypto_login_in, in, crypto_login); 2742 MLX5_SET(crypto_login, ptr, credential_pointer, 2743 attr->credential_pointer); 2744 MLX5_SET(crypto_login, ptr, session_import_kek_ptr, 2745 attr->session_import_kek_ptr); 2746 credential_addr = MLX5_ADDR_OF(crypto_login, ptr, credential); 2747 memcpy(credential_addr, (void *)(attr->credential), 2748 MLX5_CRYPTO_CREDENTIAL_SIZE); 2749 crypto_login_obj->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), 2750 out, sizeof(out)); 2751 if (crypto_login_obj->obj == NULL) { 2752 rte_errno = errno; 2753 DRV_LOG(ERR, "Failed to create CRYPTO_LOGIN obj using DevX."); 2754 mlx5_free(crypto_login_obj); 2755 return NULL; 2756 } 2757 crypto_login_obj->id = MLX5_GET(general_obj_out_cmd_hdr, out, obj_id); 2758 return crypto_login_obj; 2759 } 2760