1 /* $OpenBSD: sched_bsd.c,v 1.98 2024/11/24 13:02:37 claudio Exp $ */ 2 /* $NetBSD: kern_synch.c,v 1.37 1996/04/22 01:38:37 christos Exp $ */ 3 4 /*- 5 * Copyright (c) 1982, 1986, 1990, 1991, 1993 6 * The Regents of the University of California. All rights reserved. 7 * (c) UNIX System Laboratories, Inc. 8 * All or some portions of this file are derived from material licensed 9 * to the University of California by American Telephone and Telegraph 10 * Co. or Unix System Laboratories, Inc. and are reproduced herein with 11 * the permission of UNIX System Laboratories, Inc. 12 * 13 * Redistribution and use in source and binary forms, with or without 14 * modification, are permitted provided that the following conditions 15 * are met: 16 * 1. Redistributions of source code must retain the above copyright 17 * notice, this list of conditions and the following disclaimer. 18 * 2. Redistributions in binary form must reproduce the above copyright 19 * notice, this list of conditions and the following disclaimer in the 20 * documentation and/or other materials provided with the distribution. 21 * 3. Neither the name of the University nor the names of its contributors 22 * may be used to endorse or promote products derived from this software 23 * without specific prior written permission. 24 * 25 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 26 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 27 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 28 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 29 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 30 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 31 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 32 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 33 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 34 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 35 * SUCH DAMAGE. 36 * 37 * @(#)kern_synch.c 8.6 (Berkeley) 1/21/94 38 */ 39 40 #include <sys/param.h> 41 #include <sys/systm.h> 42 #include <sys/clockintr.h> 43 #include <sys/proc.h> 44 #include <sys/kernel.h> 45 #include <sys/malloc.h> 46 #include <sys/resourcevar.h> 47 #include <uvm/uvm_extern.h> 48 #include <sys/sched.h> 49 #include <sys/timeout.h> 50 #include <sys/smr.h> 51 #include <sys/tracepoint.h> 52 53 #ifdef KTRACE 54 #include <sys/ktrace.h> 55 #endif 56 57 uint64_t roundrobin_period; /* [I] roundrobin period (ns) */ 58 int lbolt; /* once a second sleep address */ 59 60 struct mutex sched_lock; 61 62 void update_loadavg(void *); 63 void schedcpu(void *); 64 uint32_t decay_aftersleep(uint32_t, uint32_t); 65 66 extern struct cpuset sched_idle_cpus; 67 68 /* 69 * constants for averages over 1, 5, and 15 minutes when sampling at 70 * 5 second intervals. 71 */ 72 static const fixpt_t cexp[3] = { 73 0.9200444146293232 * FSCALE, /* exp(-1/12) */ 74 0.9834714538216174 * FSCALE, /* exp(-1/60) */ 75 0.9944598480048967 * FSCALE, /* exp(-1/180) */ 76 }; 77 78 struct loadavg averunnable; 79 80 /* 81 * Force switch among equal priority processes every 100ms. 82 */ 83 void 84 roundrobin(struct clockrequest *cr, void *cf, void *arg) 85 { 86 uint64_t count; 87 struct cpu_info *ci = curcpu(); 88 struct schedstate_percpu *spc = &ci->ci_schedstate; 89 90 count = clockrequest_advance(cr, roundrobin_period); 91 92 if (ci->ci_curproc != NULL) { 93 if (spc->spc_schedflags & SPCF_SEENRR || count >= 2) { 94 /* 95 * The process has already been through a roundrobin 96 * without switching and may be hogging the CPU. 97 * Indicate that the process should yield. 98 */ 99 atomic_setbits_int(&spc->spc_schedflags, 100 SPCF_SEENRR | SPCF_SHOULDYIELD); 101 } else { 102 atomic_setbits_int(&spc->spc_schedflags, 103 SPCF_SEENRR); 104 } 105 } 106 107 if (spc->spc_nrun || spc->spc_schedflags & SPCF_SHOULDYIELD) 108 need_resched(ci); 109 } 110 111 112 113 /* 114 * update_loadav: compute a tenex style load average of a quantity on 115 * 1, 5, and 15 minute intervals. 116 */ 117 void 118 update_loadavg(void *unused) 119 { 120 static struct timeout to = TIMEOUT_INITIALIZER(update_loadavg, NULL); 121 CPU_INFO_ITERATOR cii; 122 struct cpu_info *ci; 123 u_int i, nrun = 0; 124 125 CPU_INFO_FOREACH(cii, ci) { 126 if (!cpuset_isset(&sched_idle_cpus, ci)) 127 nrun++; 128 nrun += ci->ci_schedstate.spc_nrun; 129 } 130 131 for (i = 0; i < 3; i++) { 132 averunnable.ldavg[i] = (cexp[i] * averunnable.ldavg[i] + 133 nrun * FSCALE * (FSCALE - cexp[i])) >> FSHIFT; 134 } 135 136 timeout_add_sec(&to, 5); 137 } 138 139 /* 140 * Constants for digital decay and forget: 141 * 90% of (p_estcpu) usage in 5 * loadav time 142 * 95% of (p_pctcpu) usage in 60 seconds (load insensitive) 143 * Note that, as ps(1) mentions, this can let percentages 144 * total over 100% (I've seen 137.9% for 3 processes). 145 * 146 * Note that hardclock updates p_estcpu and p_cpticks independently. 147 * 148 * We wish to decay away 90% of p_estcpu in (5 * loadavg) seconds. 149 * That is, the system wants to compute a value of decay such 150 * that the following for loop: 151 * for (i = 0; i < (5 * loadavg); i++) 152 * p_estcpu *= decay; 153 * will compute 154 * p_estcpu *= 0.1; 155 * for all values of loadavg: 156 * 157 * Mathematically this loop can be expressed by saying: 158 * decay ** (5 * loadavg) ~= .1 159 * 160 * The system computes decay as: 161 * decay = (2 * loadavg) / (2 * loadavg + 1) 162 * 163 * We wish to prove that the system's computation of decay 164 * will always fulfill the equation: 165 * decay ** (5 * loadavg) ~= .1 166 * 167 * If we compute b as: 168 * b = 2 * loadavg 169 * then 170 * decay = b / (b + 1) 171 * 172 * We now need to prove two things: 173 * 1) Given factor ** (5 * loadavg) ~= .1, prove factor == b/(b+1) 174 * 2) Given b/(b+1) ** power ~= .1, prove power == (5 * loadavg) 175 * 176 * Facts: 177 * For x close to zero, exp(x) =~ 1 + x, since 178 * exp(x) = 0! + x**1/1! + x**2/2! + ... . 179 * therefore exp(-1/b) =~ 1 - (1/b) = (b-1)/b. 180 * For x close to zero, ln(1+x) =~ x, since 181 * ln(1+x) = x - x**2/2 + x**3/3 - ... -1 < x < 1 182 * therefore ln(b/(b+1)) = ln(1 - 1/(b+1)) =~ -1/(b+1). 183 * ln(.1) =~ -2.30 184 * 185 * Proof of (1): 186 * Solve (factor)**(power) =~ .1 given power (5*loadav): 187 * solving for factor, 188 * ln(factor) =~ (-2.30/5*loadav), or 189 * factor =~ exp(-1/((5/2.30)*loadav)) =~ exp(-1/(2*loadav)) = 190 * exp(-1/b) =~ (b-1)/b =~ b/(b+1). QED 191 * 192 * Proof of (2): 193 * Solve (factor)**(power) =~ .1 given factor == (b/(b+1)): 194 * solving for power, 195 * power*ln(b/(b+1)) =~ -2.30, or 196 * power =~ 2.3 * (b + 1) = 4.6*loadav + 2.3 =~ 5*loadav. QED 197 * 198 * Actual power values for the implemented algorithm are as follows: 199 * loadav: 1 2 3 4 200 * power: 5.68 10.32 14.94 19.55 201 */ 202 203 /* calculations for digital decay to forget 90% of usage in 5*loadav sec */ 204 #define loadfactor(loadav) (2 * (loadav)) 205 #define decay_cpu(loadfac, cpu) (((loadfac) * (cpu)) / ((loadfac) + FSCALE)) 206 207 /* decay 95% of `p_pctcpu' in 60 seconds; see CCPU_SHIFT before changing */ 208 fixpt_t ccpu = 0.95122942450071400909 * FSCALE; /* exp(-1/20) */ 209 210 /* 211 * If `ccpu' is not equal to `exp(-1/20)' and you still want to use the 212 * faster/more-accurate formula, you'll have to estimate CCPU_SHIFT below 213 * and possibly adjust FSHIFT in "param.h" so that (FSHIFT >= CCPU_SHIFT). 214 * 215 * To estimate CCPU_SHIFT for exp(-1/20), the following formula was used: 216 * 1 - exp(-1/20) ~= 0.0487 ~= 0.0488 == 1 (fixed pt, *11* bits). 217 * 218 * If you don't want to bother with the faster/more-accurate formula, you 219 * can set CCPU_SHIFT to (FSHIFT + 1) which will use a slower/less-accurate 220 * (more general) method of calculating the %age of CPU used by a process. 221 */ 222 #define CCPU_SHIFT 11 223 224 /* 225 * Recompute process priorities, every second. 226 */ 227 void 228 schedcpu(void *unused) 229 { 230 static struct timeout to = TIMEOUT_INITIALIZER(schedcpu, NULL); 231 fixpt_t loadfac = loadfactor(averunnable.ldavg[0]); 232 struct proc *p; 233 unsigned int newcpu; 234 235 LIST_FOREACH(p, &allproc, p_list) { 236 /* 237 * Idle threads are never placed on the runqueue, 238 * therefore computing their priority is pointless. 239 */ 240 if (p->p_cpu != NULL && 241 p->p_cpu->ci_schedstate.spc_idleproc == p) 242 continue; 243 /* 244 * Increment sleep time (if sleeping). We ignore overflow. 245 */ 246 if (p->p_stat == SSLEEP || p->p_stat == SSTOP) 247 p->p_slptime++; 248 p->p_pctcpu = (p->p_pctcpu * ccpu) >> FSHIFT; 249 /* 250 * If the process has slept the entire second, 251 * stop recalculating its priority until it wakes up. 252 */ 253 if (p->p_slptime > 1) 254 continue; 255 SCHED_LOCK(); 256 /* 257 * p_pctcpu is only for diagnostic tools such as ps. 258 */ 259 #if (FSHIFT >= CCPU_SHIFT) 260 p->p_pctcpu += (stathz == 100)? 261 ((fixpt_t) p->p_cpticks) << (FSHIFT - CCPU_SHIFT): 262 100 * (((fixpt_t) p->p_cpticks) 263 << (FSHIFT - CCPU_SHIFT)) / stathz; 264 #else 265 p->p_pctcpu += ((FSCALE - ccpu) * 266 (p->p_cpticks * FSCALE / stathz)) >> FSHIFT; 267 #endif 268 p->p_cpticks = 0; 269 newcpu = (u_int) decay_cpu(loadfac, p->p_estcpu); 270 setpriority(p, newcpu, p->p_p->ps_nice); 271 272 if (p->p_stat == SRUN && 273 (p->p_runpri / SCHED_PPQ) != (p->p_usrpri / SCHED_PPQ)) { 274 remrunqueue(p); 275 setrunqueue(p->p_cpu, p, p->p_usrpri); 276 } 277 SCHED_UNLOCK(); 278 } 279 wakeup(&lbolt); 280 timeout_add_sec(&to, 1); 281 } 282 283 /* 284 * Recalculate the priority of a process after it has slept for a while. 285 * For all load averages >= 1 and max p_estcpu of 255, sleeping for at 286 * least six times the loadfactor will decay p_estcpu to zero. 287 */ 288 uint32_t 289 decay_aftersleep(uint32_t estcpu, uint32_t slptime) 290 { 291 fixpt_t loadfac = loadfactor(averunnable.ldavg[0]); 292 uint32_t newcpu; 293 294 if (slptime > 5 * loadfac) 295 newcpu = 0; 296 else { 297 newcpu = estcpu; 298 slptime--; /* the first time was done in schedcpu */ 299 while (newcpu && --slptime) 300 newcpu = decay_cpu(loadfac, newcpu); 301 302 } 303 304 return (newcpu); 305 } 306 307 /* 308 * General yield call. Puts the current process back on its run queue and 309 * performs a voluntary context switch. 310 */ 311 void 312 yield(void) 313 { 314 struct proc *p = curproc; 315 316 SCHED_LOCK(); 317 setrunqueue(p->p_cpu, p, p->p_usrpri); 318 p->p_ru.ru_nvcsw++; 319 mi_switch(); 320 SCHED_UNLOCK(); 321 } 322 323 /* 324 * General preemption call. Puts the current process back on its run queue 325 * and performs an involuntary context switch. If a process is supplied, 326 * we switch to that process. Otherwise, we use the normal process selection 327 * criteria. 328 */ 329 void 330 preempt(void) 331 { 332 struct proc *p = curproc; 333 334 SCHED_LOCK(); 335 setrunqueue(p->p_cpu, p, p->p_usrpri); 336 p->p_ru.ru_nivcsw++; 337 mi_switch(); 338 SCHED_UNLOCK(); 339 } 340 341 void 342 mi_switch(void) 343 { 344 struct schedstate_percpu *spc = &curcpu()->ci_schedstate; 345 struct proc *p = curproc; 346 struct proc *nextproc; 347 int oldipl; 348 #ifdef MULTIPROCESSOR 349 int hold_count; 350 #endif 351 352 KASSERT(p->p_stat != SONPROC); 353 354 SCHED_ASSERT_LOCKED(); 355 356 #ifdef MULTIPROCESSOR 357 /* 358 * Release the kernel_lock, as we are about to yield the CPU. 359 */ 360 if (_kernel_lock_held()) 361 hold_count = __mp_release_all(&kernel_lock); 362 else 363 hold_count = 0; 364 #endif 365 366 /* Update thread runtime */ 367 tuagg_add_runtime(); 368 369 /* Stop any optional clock interrupts. */ 370 if (ISSET(spc->spc_schedflags, SPCF_ITIMER)) { 371 atomic_clearbits_int(&spc->spc_schedflags, SPCF_ITIMER); 372 clockintr_cancel(&spc->spc_itimer); 373 } 374 if (ISSET(spc->spc_schedflags, SPCF_PROFCLOCK)) { 375 atomic_clearbits_int(&spc->spc_schedflags, SPCF_PROFCLOCK); 376 clockintr_cancel(&spc->spc_profclock); 377 } 378 379 /* 380 * Process is about to yield the CPU; clear the appropriate 381 * scheduling flags. 382 */ 383 atomic_clearbits_int(&spc->spc_schedflags, SPCF_SWITCHCLEAR); 384 385 nextproc = sched_chooseproc(); 386 387 /* preserve old IPL level so we can switch back to that */ 388 oldipl = MUTEX_OLDIPL(&sched_lock); 389 390 if (p != nextproc) { 391 uvmexp.swtch++; 392 TRACEPOINT(sched, off__cpu, nextproc->p_tid + THREAD_PID_OFFSET, 393 nextproc->p_p->ps_pid); 394 cpu_switchto(p, nextproc); 395 TRACEPOINT(sched, on__cpu, NULL); 396 } else { 397 TRACEPOINT(sched, remain__cpu, NULL); 398 p->p_stat = SONPROC; 399 } 400 401 clear_resched(curcpu()); 402 403 SCHED_ASSERT_LOCKED(); 404 405 /* Restore proc's IPL. */ 406 MUTEX_OLDIPL(&sched_lock) = oldipl; 407 SCHED_UNLOCK(); 408 409 SCHED_ASSERT_UNLOCKED(); 410 411 assertwaitok(); 412 smr_idle(); 413 414 /* 415 * We're running again; record our new start time. We might 416 * be running on a new CPU now, so refetch the schedstate_percpu 417 * pointer. 418 */ 419 KASSERT(p->p_cpu == curcpu()); 420 spc = &p->p_cpu->ci_schedstate; 421 422 /* Start any optional clock interrupts needed by the thread. */ 423 if (ISSET(p->p_p->ps_flags, PS_ITIMER)) { 424 atomic_setbits_int(&spc->spc_schedflags, SPCF_ITIMER); 425 clockintr_advance(&spc->spc_itimer, hardclock_period); 426 } 427 if (ISSET(p->p_p->ps_flags, PS_PROFIL)) { 428 atomic_setbits_int(&spc->spc_schedflags, SPCF_PROFCLOCK); 429 clockintr_advance(&spc->spc_profclock, profclock_period); 430 } 431 432 nanouptime(&spc->spc_runtime); 433 434 #ifdef MULTIPROCESSOR 435 /* 436 * Reacquire the kernel_lock now. We do this after we've 437 * released the scheduler lock to avoid deadlock, and before 438 * we reacquire the interlock and the scheduler lock. 439 */ 440 if (hold_count) 441 __mp_acquire_count(&kernel_lock, hold_count); 442 #endif 443 SCHED_LOCK(); 444 } 445 446 /* 447 * Change process state to be runnable, 448 * placing it on the run queue. 449 */ 450 void 451 setrunnable(struct proc *p) 452 { 453 struct process *pr = p->p_p; 454 u_char prio; 455 456 SCHED_ASSERT_LOCKED(); 457 458 switch (p->p_stat) { 459 case 0: 460 case SRUN: 461 case SONPROC: 462 case SDEAD: 463 case SIDL: 464 default: 465 panic("setrunnable"); 466 case SSTOP: 467 prio = p->p_usrpri; 468 /* if not yet asleep, unstop but don't add to runqueue */ 469 if (ISSET(p->p_flag, P_WSLEEP)) { 470 p->p_stat = SSLEEP; 471 return; 472 } 473 setrunqueue(NULL, p, prio); 474 break; 475 case SSLEEP: 476 prio = p->p_slppri; 477 478 /* if not yet asleep, don't add to runqueue */ 479 if (ISSET(p->p_flag, P_WSLEEP)) 480 return; 481 setrunqueue(NULL, p, prio); 482 TRACEPOINT(sched, wakeup, p->p_tid + THREAD_PID_OFFSET, 483 p->p_p->ps_pid, CPU_INFO_UNIT(p->p_cpu)); 484 break; 485 } 486 if (p->p_slptime > 1) { 487 uint32_t newcpu; 488 489 newcpu = decay_aftersleep(p->p_estcpu, p->p_slptime); 490 setpriority(p, newcpu, pr->ps_nice); 491 } 492 p->p_slptime = 0; 493 } 494 495 /* 496 * Compute the priority of a process. 497 */ 498 void 499 setpriority(struct proc *p, uint32_t newcpu, uint8_t nice) 500 { 501 unsigned int newprio; 502 503 newprio = min((PUSER + newcpu + NICE_WEIGHT * (nice - NZERO)), MAXPRI); 504 505 SCHED_ASSERT_LOCKED(); 506 p->p_estcpu = newcpu; 507 p->p_usrpri = newprio; 508 } 509 510 /* 511 * We adjust the priority of the current process. The priority of a process 512 * gets worse as it accumulates CPU time. The cpu usage estimator (p_estcpu) 513 * is increased here. The formula for computing priorities (in kern_synch.c) 514 * will compute a different value each time p_estcpu increases. This can 515 * cause a switch, but unless the priority crosses a PPQ boundary the actual 516 * queue will not change. The cpu usage estimator ramps up quite quickly 517 * when the process is running (linearly), and decays away exponentially, at 518 * a rate which is proportionally slower when the system is busy. The basic 519 * principle is that the system will 90% forget that the process used a lot 520 * of CPU time in 5 * loadav seconds. This causes the system to favor 521 * processes which haven't run much recently, and to round-robin among other 522 * processes. 523 */ 524 void 525 schedclock(struct proc *p) 526 { 527 struct cpu_info *ci = curcpu(); 528 struct schedstate_percpu *spc = &ci->ci_schedstate; 529 uint32_t newcpu; 530 531 if (p == spc->spc_idleproc || spc->spc_spinning) 532 return; 533 534 SCHED_LOCK(); 535 newcpu = ESTCPULIM(p->p_estcpu + 1); 536 setpriority(p, newcpu, p->p_p->ps_nice); 537 SCHED_UNLOCK(); 538 } 539 540 void (*cpu_setperf)(int); 541 542 #define PERFPOL_MANUAL 0 543 #define PERFPOL_AUTO 1 544 #define PERFPOL_HIGH 2 545 int perflevel = 100; 546 int perfpolicy_on_ac = PERFPOL_HIGH; 547 int perfpolicy_on_battery = PERFPOL_AUTO; 548 549 #ifndef SMALL_KERNEL 550 /* 551 * The code below handles CPU throttling. 552 */ 553 #include <sys/sysctl.h> 554 555 void setperf_auto(void *); 556 struct timeout setperf_to = TIMEOUT_INITIALIZER(setperf_auto, NULL); 557 extern int hw_power; 558 559 static inline int 560 perfpolicy_dynamic(void) 561 { 562 return (perfpolicy_on_ac == PERFPOL_AUTO || 563 perfpolicy_on_battery == PERFPOL_AUTO); 564 } 565 566 static inline int 567 current_perfpolicy(void) 568 { 569 return (hw_power) ? perfpolicy_on_ac : perfpolicy_on_battery; 570 } 571 572 void 573 setperf_auto(void *v) 574 { 575 static uint64_t *idleticks, *totalticks; 576 static int downbeats; 577 int i, j = 0; 578 int speedup = 0; 579 CPU_INFO_ITERATOR cii; 580 struct cpu_info *ci; 581 uint64_t idle, total, allidle = 0, alltotal = 0; 582 583 if (!perfpolicy_dynamic()) 584 return; 585 586 if (cpu_setperf == NULL) 587 return; 588 589 if (current_perfpolicy() == PERFPOL_HIGH) { 590 speedup = 1; 591 goto faster; 592 } 593 594 if (!idleticks) 595 if (!(idleticks = mallocarray(ncpusfound, sizeof(*idleticks), 596 M_DEVBUF, M_NOWAIT | M_ZERO))) 597 return; 598 if (!totalticks) 599 if (!(totalticks = mallocarray(ncpusfound, sizeof(*totalticks), 600 M_DEVBUF, M_NOWAIT | M_ZERO))) { 601 free(idleticks, M_DEVBUF, 602 sizeof(*idleticks) * ncpusfound); 603 return; 604 } 605 CPU_INFO_FOREACH(cii, ci) { 606 if (!cpu_is_online(ci)) 607 continue; 608 total = 0; 609 for (i = 0; i < CPUSTATES; i++) { 610 total += ci->ci_schedstate.spc_cp_time[i]; 611 } 612 total -= totalticks[j]; 613 idle = ci->ci_schedstate.spc_cp_time[CP_IDLE] - idleticks[j]; 614 if (idle < total / 3) 615 speedup = 1; 616 alltotal += total; 617 allidle += idle; 618 idleticks[j] += idle; 619 totalticks[j] += total; 620 j++; 621 } 622 if (allidle < alltotal / 2) 623 speedup = 1; 624 if (speedup && downbeats < 5) 625 downbeats++; 626 627 if (speedup && perflevel != 100) { 628 faster: 629 perflevel = 100; 630 cpu_setperf(perflevel); 631 } else if (!speedup && perflevel != 0 && --downbeats <= 0) { 632 perflevel = 0; 633 cpu_setperf(perflevel); 634 } 635 636 timeout_add_msec(&setperf_to, 100); 637 } 638 639 int 640 sysctl_hwsetperf(void *oldp, size_t *oldlenp, void *newp, size_t newlen) 641 { 642 int err; 643 644 if (!cpu_setperf) 645 return EOPNOTSUPP; 646 647 if (perfpolicy_on_ac != PERFPOL_MANUAL) 648 return sysctl_rdint(oldp, oldlenp, newp, perflevel); 649 650 err = sysctl_int_bounded(oldp, oldlenp, newp, newlen, 651 &perflevel, 0, 100); 652 if (err) 653 return err; 654 655 if (newp != NULL) 656 cpu_setperf(perflevel); 657 658 return 0; 659 } 660 661 int 662 sysctl_hwperfpolicy(void *oldp, size_t *oldlenp, void *newp, size_t newlen) 663 { 664 char policy[32]; 665 char *policy_on_battery; 666 int err, perfpolicy; 667 668 if (!cpu_setperf) 669 return EOPNOTSUPP; 670 671 switch (current_perfpolicy()) { 672 case PERFPOL_MANUAL: 673 strlcpy(policy, "manual", sizeof(policy)); 674 break; 675 case PERFPOL_AUTO: 676 strlcpy(policy, "auto", sizeof(policy)); 677 break; 678 case PERFPOL_HIGH: 679 strlcpy(policy, "high", sizeof(policy)); 680 break; 681 default: 682 strlcpy(policy, "unknown", sizeof(policy)); 683 break; 684 } 685 686 if (newp == NULL) 687 return sysctl_rdstring(oldp, oldlenp, newp, policy); 688 689 err = sysctl_string(oldp, oldlenp, newp, newlen, policy, sizeof(policy)); 690 if (err) 691 return err; 692 693 policy_on_battery = strchr(policy, ','); 694 if (policy_on_battery != NULL) { 695 *policy_on_battery = '\0'; 696 policy_on_battery++; 697 } 698 699 if (strcmp(policy, "manual") == 0) 700 perfpolicy = PERFPOL_MANUAL; 701 else if (strcmp(policy, "auto") == 0) 702 perfpolicy = PERFPOL_AUTO; 703 else if (strcmp(policy, "high") == 0) 704 perfpolicy = PERFPOL_HIGH; 705 else 706 return EINVAL; 707 708 if (policy_on_battery == NULL) 709 perfpolicy_on_battery = perfpolicy_on_ac = perfpolicy; 710 else { 711 if (strcmp(policy_on_battery, "manual") == 0 || 712 perfpolicy == PERFPOL_MANUAL) { 713 /* Not handled */ 714 return EINVAL; 715 } 716 if (strcmp(policy_on_battery, "auto") == 0) 717 perfpolicy_on_battery = PERFPOL_AUTO; 718 else if (strcmp(policy_on_battery, "high") == 0) 719 perfpolicy_on_battery = PERFPOL_HIGH; 720 else 721 return EINVAL; 722 perfpolicy_on_ac = perfpolicy; 723 } 724 725 if (current_perfpolicy() == PERFPOL_HIGH) { 726 perflevel = 100; 727 cpu_setperf(perflevel); 728 } 729 730 if (perfpolicy_dynamic()) 731 timeout_add_msec(&setperf_to, 200); 732 733 return 0; 734 } 735 #endif 736 737 /* 738 * Start the scheduler's periodic timeouts. 739 */ 740 void 741 scheduler_start(void) 742 { 743 schedcpu(NULL); 744 update_loadavg(NULL); 745 746 #ifndef SMALL_KERNEL 747 if (perfpolicy_dynamic()) 748 timeout_add_msec(&setperf_to, 200); 749 #endif 750 } 751 752