1 /* $NetBSD: if_hme_pci.c,v 1.36 2011/05/10 18:31:33 dyoung Exp $ */ 2 3 /* 4 * Copyright (c) 2000 Matthew R. Green 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 17 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 19 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 21 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 22 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 23 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 24 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 /* 30 * PCI front-end device driver for the HME ethernet device. 31 */ 32 33 #include <sys/cdefs.h> 34 __KERNEL_RCSID(0, "$NetBSD: if_hme_pci.c,v 1.36 2011/05/10 18:31:33 dyoung Exp $"); 35 36 #include <sys/param.h> 37 #include <sys/systm.h> 38 #include <sys/syslog.h> 39 #include <sys/device.h> 40 #include <sys/malloc.h> 41 #include <sys/socket.h> 42 43 #include <net/if.h> 44 #include <net/if_dl.h> 45 #include <net/if_ether.h> 46 #include <net/if_media.h> 47 48 #include <dev/mii/mii.h> 49 #include <dev/mii/miivar.h> 50 51 #include <sys/intr.h> 52 53 #include <dev/pci/pcivar.h> 54 #include <dev/pci/pcireg.h> 55 #include <dev/pci/pcidevs.h> 56 57 #include <dev/ic/hmevar.h> 58 59 #define PCI_HME_BASEADDR PCI_BAR(0) 60 61 struct hme_pci_softc { 62 struct hme_softc hsc_hme; /* HME device */ 63 bus_space_tag_t hsc_memt; 64 bus_space_handle_t hsc_memh; 65 void *hsc_ih; 66 }; 67 68 int hmematch_pci(device_t, cfdata_t, void *); 69 void hmeattach_pci(device_t, device_t, void *); 70 71 CFATTACH_DECL_NEW(hme_pci, sizeof(struct hme_pci_softc), 72 hmematch_pci, hmeattach_pci, NULL, NULL); 73 74 int 75 hmematch_pci(device_t parent, cfdata_t cf, void *aux) 76 { 77 struct pci_attach_args *pa = aux; 78 79 if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_SUN && 80 PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_SUN_HMENETWORK) 81 return (1); 82 83 return (0); 84 } 85 86 static inline int 87 hmepromvalid(uint8_t* buf) 88 { 89 return buf[0] == 0x18 && buf[1] == 0x00 && /* structure length */ 90 buf[2] == 0x00 && /* revision */ 91 (buf[3] == 0x00 || /* hme */ 92 buf[3] == 0x80) && /* qfe */ 93 buf[4] == PCI_SUBCLASS_NETWORK_ETHERNET && /* subclass code */ 94 buf[5] == PCI_CLASS_NETWORK; /* class code */ 95 } 96 97 static inline int 98 hmevpdoff(bus_space_tag_t romt, bus_space_handle_t romh, int vpdoff, int dev) 99 { 100 #define VPDLEN (3 + sizeof(struct pci_vpd) + ETHER_ADDR_LEN) 101 if (bus_space_read_1(romt, romh, vpdoff + VPDLEN) != 0x79 && 102 bus_space_read_1(romt, romh, vpdoff + 4 * VPDLEN) == 0x79) { 103 /* 104 * Use the Nth NA for the Nth HME on 105 * this SUNW,qfe. 106 */ 107 vpdoff += dev * VPDLEN; 108 } 109 return vpdoff; 110 } 111 112 void 113 hmeattach_pci(device_t parent, device_t self, void *aux) 114 { 115 struct pci_attach_args *pa = aux; 116 struct hme_pci_softc *hsc = device_private(self); 117 struct hme_softc *sc = &hsc->hsc_hme; 118 pci_intr_handle_t ih; 119 pcireg_t csr; 120 const char *intrstr; 121 int type; 122 struct pci_attach_args ebus_pa; 123 prop_data_t eaddrprop; 124 pcireg_t ebus_cl, ebus_id; 125 uint8_t *enaddr; 126 bus_space_tag_t romt; 127 bus_space_handle_t romh; 128 bus_size_t romsize; 129 uint8_t buf[64]; 130 int dataoff, vpdoff; 131 struct pci_vpd *vpd; 132 static const uint8_t promhdr[] = { 0x55, 0xaa }; 133 #define PROMHDR_PTR_DATA 0x18 134 static const uint8_t promdat[] = { 135 0x50, 0x43, 0x49, 0x52, /* "PCIR" */ 136 PCI_VENDOR_SUN & 0xff, PCI_VENDOR_SUN >> 8, 137 PCI_PRODUCT_SUN_HMENETWORK & 0xff, 138 PCI_PRODUCT_SUN_HMENETWORK >> 8 139 }; 140 #define PROMDATA_PTR_VPD 0x08 141 #define PROMDATA_DATA2 0x0a 142 143 sc->sc_dev = self; 144 145 aprint_normal(": Sun Happy Meal Ethernet, rev. %d\n", 146 PCI_REVISION(pa->pa_class)); 147 aprint_naive(": Ethernet controller\n"); 148 149 csr = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG); 150 type = pci_mapreg_type(pa->pa_pc, pa->pa_tag, PCI_HME_BASEADDR); 151 152 /* 153 * enable io/memory-space accesses. this is kinda of gross; but 154 * the hme comes up with neither IO space enabled, or memory space. 155 */ 156 switch (type) { 157 case PCI_MAPREG_TYPE_MEM: 158 csr |= PCI_COMMAND_MEM_ENABLE; 159 sc->sc_bustag = pa->pa_memt; 160 break; 161 case PCI_MAPREG_TYPE_IO: 162 csr |= PCI_COMMAND_IO_ENABLE; 163 sc->sc_bustag = pa->pa_iot; 164 break; 165 } 166 pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, 167 csr | PCI_COMMAND_MEM_ENABLE); 168 169 sc->sc_dmatag = pa->pa_dmat; 170 171 sc->sc_pci = 1; /* XXXXX should all be done in bus_dma. */ 172 /* 173 * Map five register banks: 174 * 175 * bank 0: HME SEB registers: +0x0000 176 * bank 1: HME ETX registers: +0x2000 177 * bank 2: HME ERX registers: +0x4000 178 * bank 3: HME MAC registers: +0x6000 179 * bank 4: HME MIF registers: +0x7000 180 * 181 */ 182 183 if (pci_mapreg_map(pa, PCI_HME_BASEADDR, type, 0, 184 &hsc->hsc_memt, &hsc->hsc_memh, NULL, NULL) != 0) { 185 aprint_error_dev(self, "unable to map device registers\n"); 186 return; 187 } 188 sc->sc_seb = hsc->hsc_memh; 189 if (bus_space_subregion(hsc->hsc_memt, hsc->hsc_memh, 0x2000, 190 0x1000, &sc->sc_etx)) { 191 aprint_error_dev(self, "unable to subregion ETX registers\n"); 192 return; 193 } 194 if (bus_space_subregion(hsc->hsc_memt, hsc->hsc_memh, 0x4000, 195 0x1000, &sc->sc_erx)) { 196 aprint_error_dev(self, "unable to subregion ERX registers\n"); 197 return; 198 } 199 if (bus_space_subregion(hsc->hsc_memt, hsc->hsc_memh, 0x6000, 200 0x1000, &sc->sc_mac)) { 201 aprint_error_dev(self, "unable to subregion MAC registers\n"); 202 return; 203 } 204 if (bus_space_subregion(hsc->hsc_memt, hsc->hsc_memh, 0x7000, 205 0x1000, &sc->sc_mif)) { 206 aprint_error_dev(self, "unable to subregion MIF registers\n"); 207 return; 208 } 209 210 211 /* 212 * Check if we got a mac-address property passed 213 */ 214 eaddrprop = prop_dictionary_get(device_properties(self), "mac-address"); 215 216 if (eaddrprop != NULL && prop_data_size(eaddrprop) == ETHER_ADDR_LEN) { 217 memcpy(&sc->sc_enaddr, prop_data_data_nocopy(eaddrprop), 218 ETHER_ADDR_LEN); 219 goto got_eaddr; 220 } 221 222 /* 223 * Dig out VPD (vital product data) and acquire Ethernet address. 224 * The VPD of hme resides in the Boot PROM (PCI FCode) attached 225 * to the EBus interface. 226 */ 227 /* 228 * ``Writing FCode 3.x Programs'' (newer ones, dated 1997 and later) 229 * chapter 2 describes the data structure. 230 */ 231 232 enaddr = NULL; 233 234 /* get a PCI tag for the EBus bridge (function 0 of the same device) */ 235 ebus_pa = *pa; 236 ebus_pa.pa_tag = pci_make_tag(pa->pa_pc, pa->pa_bus, pa->pa_device, 0); 237 238 ebus_cl = pci_conf_read(ebus_pa.pa_pc, ebus_pa.pa_tag, PCI_CLASS_REG); 239 ebus_id = pci_conf_read(ebus_pa.pa_pc, ebus_pa.pa_tag, PCI_ID_REG); 240 241 #define PCI_EBUS2_BOOTROM 0x10 242 if (PCI_CLASS(ebus_cl) == PCI_CLASS_BRIDGE && 243 PCI_PRODUCT(ebus_id) == PCI_PRODUCT_SUN_EBUS && 244 pci_mapreg_map(&ebus_pa, PCI_EBUS2_BOOTROM, PCI_MAPREG_TYPE_MEM, 245 BUS_SPACE_MAP_CACHEABLE | BUS_SPACE_MAP_PREFETCHABLE, 246 &romt, &romh, 0, &romsize) == 0) { 247 248 /* read PCI Expansion PROM Header */ 249 bus_space_read_region_1(romt, romh, 0, buf, sizeof buf); 250 if (memcmp(buf, promhdr, sizeof promhdr) == 0 && 251 (dataoff = (buf[PROMHDR_PTR_DATA] | 252 (buf[PROMHDR_PTR_DATA + 1] << 8))) >= 0x1c) { 253 254 /* read PCI Expansion PROM Data */ 255 bus_space_read_region_1(romt, romh, dataoff, 256 buf, sizeof buf); 257 if (memcmp(buf, promdat, sizeof promdat) == 0 && 258 hmepromvalid(buf + PROMDATA_DATA2) && 259 (vpdoff = (buf[PROMDATA_PTR_VPD] | 260 (buf[PROMDATA_PTR_VPD + 1] << 8))) >= 0x1c) { 261 262 /* 263 * The VPD of hme is not in PCI 2.2 standard 264 * format. The length in the resource header 265 * is in big endian, and resources are not 266 * properly terminated (only one resource 267 * and no end tag). 268 */ 269 vpdoff = hmevpdoff(romt, romh, vpdoff, 270 pa->pa_device); 271 /* read PCI VPD */ 272 bus_space_read_region_1(romt, romh, 273 vpdoff, buf, sizeof buf); 274 vpd = (void *)(buf + 3); 275 if (PCI_VPDRES_ISLARGE(buf[0]) && 276 PCI_VPDRES_LARGE_NAME(buf[0]) 277 == PCI_VPDRES_TYPE_VPD && 278 /* buf[1] == 0 && buf[2] == 9 && */ /*len*/ 279 vpd->vpd_key0 == 0x4e /* N */ && 280 vpd->vpd_key1 == 0x41 /* A */ && 281 vpd->vpd_len == ETHER_ADDR_LEN) { 282 /* 283 * Ethernet address found 284 */ 285 enaddr = buf + 6; 286 } 287 } 288 } 289 bus_space_unmap(romt, romh, romsize); 290 } 291 292 if (enaddr) { 293 memcpy(sc->sc_enaddr, enaddr, ETHER_ADDR_LEN); 294 goto got_eaddr; 295 } 296 297 aprint_error_dev(self, "no Ethernet address found\n"); 298 got_eaddr: 299 300 /* 301 * Map and establish our interrupt. 302 */ 303 if (pci_intr_map(pa, &ih) != 0) { 304 aprint_error_dev(self, "unable to map interrupt\n"); 305 return; 306 } 307 intrstr = pci_intr_string(pa->pa_pc, ih); 308 hsc->hsc_ih = pci_intr_establish(pa->pa_pc, ih, IPL_NET, hme_intr, sc); 309 if (hsc->hsc_ih == NULL) { 310 aprint_error_dev(self, "unable to establish interrupt"); 311 if (intrstr != NULL) 312 aprint_error(" at %s", intrstr); 313 aprint_error("\n"); 314 return; 315 } 316 aprint_normal_dev(self, "interrupting at %s\n", intrstr); 317 318 sc->sc_burst = 16; /* XXX */ 319 320 /* Finish off the attach. */ 321 hme_config(sc); 322 } 323