1 /******************************************************************************
2 *
3 * Module Name: nsarguments - Validation of args for ACPI predefined methods
4 *
5 *****************************************************************************/
6
7 /*
8 * Copyright (C) 2000 - 2014, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44 #include "acpi.h"
45 #include "accommon.h"
46 #include "acnamesp.h"
47 #include "acpredef.h"
48
49
50 #define _COMPONENT ACPI_NAMESPACE
51 ACPI_MODULE_NAME ("nsarguments")
52
53
54 /*******************************************************************************
55 *
56 * FUNCTION: AcpiNsCheckArgumentTypes
57 *
58 * PARAMETERS: Info - Method execution information block
59 *
60 * RETURN: None
61 *
62 * DESCRIPTION: Check the incoming argument count and all argument types
63 * against the argument type list for a predefined name.
64 *
65 ******************************************************************************/
66
67 void
AcpiNsCheckArgumentTypes(ACPI_EVALUATE_INFO * Info)68 AcpiNsCheckArgumentTypes (
69 ACPI_EVALUATE_INFO *Info)
70 {
71 UINT16 ArgTypeList;
72 UINT8 ArgCount;
73 UINT8 ArgType;
74 UINT8 UserArgType;
75 UINT32 i;
76
77
78 /* If not a predefined name, cannot typecheck args */
79
80 if (!Info->Predefined)
81 {
82 return;
83 }
84
85 ArgTypeList = Info->Predefined->Info.ArgumentList;
86 ArgCount = METHOD_GET_ARG_COUNT (ArgTypeList);
87
88 /* Typecheck all arguments */
89
90 for (i = 0; ((i < ArgCount) && (i < Info->ParamCount)); i++)
91 {
92 ArgType = METHOD_GET_NEXT_TYPE (ArgTypeList);
93 UserArgType = Info->Parameters[i]->Common.Type;
94
95 if (UserArgType != ArgType)
96 {
97 ACPI_WARN_PREDEFINED ((AE_INFO, Info->FullPathname, ACPI_WARN_ALWAYS,
98 "Argument #%u type mismatch - "
99 "Found [%s], ACPI requires [%s]", (i + 1),
100 AcpiUtGetTypeName (UserArgType),
101 AcpiUtGetTypeName (ArgType)));
102 }
103 }
104 }
105
106
107 /*******************************************************************************
108 *
109 * FUNCTION: AcpiNsCheckAcpiCompliance
110 *
111 * PARAMETERS: Pathname - Full pathname to the node (for error msgs)
112 * Node - Namespace node for the method/object
113 * Predefined - Pointer to entry in predefined name table
114 *
115 * RETURN: None
116 *
117 * DESCRIPTION: Check that the declared parameter count (in ASL/AML) for a
118 * predefined name is what is expected (matches what is defined in
119 * the ACPI specification for this predefined name.)
120 *
121 ******************************************************************************/
122
123 void
AcpiNsCheckAcpiCompliance(char * Pathname,ACPI_NAMESPACE_NODE * Node,const ACPI_PREDEFINED_INFO * Predefined)124 AcpiNsCheckAcpiCompliance (
125 char *Pathname,
126 ACPI_NAMESPACE_NODE *Node,
127 const ACPI_PREDEFINED_INFO *Predefined)
128 {
129 UINT32 AmlParamCount;
130 UINT32 RequiredParamCount;
131
132
133 if (!Predefined)
134 {
135 return;
136 }
137
138 /* Get the ACPI-required arg count from the predefined info table */
139
140 RequiredParamCount = METHOD_GET_ARG_COUNT (Predefined->Info.ArgumentList);
141
142 /*
143 * If this object is not a control method, we can check if the ACPI
144 * spec requires that it be a method.
145 */
146 if (Node->Type != ACPI_TYPE_METHOD)
147 {
148 if (RequiredParamCount > 0)
149 {
150 /* Object requires args, must be implemented as a method */
151
152 ACPI_BIOS_ERROR_PREDEFINED ((AE_INFO, Pathname, ACPI_WARN_ALWAYS,
153 "Object (%s) must be a control method with %u arguments",
154 AcpiUtGetTypeName (Node->Type), RequiredParamCount));
155 }
156 else if (!RequiredParamCount && !Predefined->Info.ExpectedBtypes)
157 {
158 /* Object requires no args and no return value, must be a method */
159
160 ACPI_BIOS_ERROR_PREDEFINED ((AE_INFO, Pathname, ACPI_WARN_ALWAYS,
161 "Object (%s) must be a control method "
162 "with no arguments and no return value",
163 AcpiUtGetTypeName (Node->Type)));
164 }
165
166 return;
167 }
168
169 /*
170 * This is a control method.
171 * Check that the ASL/AML-defined parameter count for this method
172 * matches the ACPI-required parameter count
173 *
174 * Some methods are allowed to have a "minimum" number of args (_SCP)
175 * because their definition in ACPI has changed over time.
176 *
177 * Note: These are BIOS errors in the declaration of the object
178 */
179 AmlParamCount = Node->Object->Method.ParamCount;
180
181 if (AmlParamCount < RequiredParamCount)
182 {
183 ACPI_BIOS_ERROR_PREDEFINED ((AE_INFO, Pathname, ACPI_WARN_ALWAYS,
184 "Insufficient arguments - "
185 "ASL declared %u, ACPI requires %u",
186 AmlParamCount, RequiredParamCount));
187 }
188 else if ((AmlParamCount > RequiredParamCount) &&
189 !(Predefined->Info.ArgumentList & ARG_COUNT_IS_MINIMUM))
190 {
191 ACPI_BIOS_ERROR_PREDEFINED ((AE_INFO, Pathname, ACPI_WARN_ALWAYS,
192 "Excess arguments - "
193 "ASL declared %u, ACPI requires %u",
194 AmlParamCount, RequiredParamCount));
195 }
196 }
197
198
199 /*******************************************************************************
200 *
201 * FUNCTION: AcpiNsCheckArgumentCount
202 *
203 * PARAMETERS: Pathname - Full pathname to the node (for error msgs)
204 * Node - Namespace node for the method/object
205 * UserParamCount - Number of args passed in by the caller
206 * Predefined - Pointer to entry in predefined name table
207 *
208 * RETURN: None
209 *
210 * DESCRIPTION: Check that incoming argument count matches the declared
211 * parameter count (in the ASL/AML) for an object.
212 *
213 ******************************************************************************/
214
215 void
AcpiNsCheckArgumentCount(char * Pathname,ACPI_NAMESPACE_NODE * Node,UINT32 UserParamCount,const ACPI_PREDEFINED_INFO * Predefined)216 AcpiNsCheckArgumentCount (
217 char *Pathname,
218 ACPI_NAMESPACE_NODE *Node,
219 UINT32 UserParamCount,
220 const ACPI_PREDEFINED_INFO *Predefined)
221 {
222 UINT32 AmlParamCount;
223 UINT32 RequiredParamCount;
224
225
226 if (!Predefined)
227 {
228 /*
229 * Not a predefined name. Check the incoming user argument count
230 * against the count that is specified in the method/object.
231 */
232 if (Node->Type != ACPI_TYPE_METHOD)
233 {
234 if (UserParamCount)
235 {
236 ACPI_INFO_PREDEFINED ((AE_INFO, Pathname, ACPI_WARN_ALWAYS,
237 "%u arguments were passed to a non-method ACPI object (%s)",
238 UserParamCount, AcpiUtGetTypeName (Node->Type)));
239 }
240
241 return;
242 }
243
244 /*
245 * This is a control method. Check the parameter count.
246 * We can only check the incoming argument count against the
247 * argument count declared for the method in the ASL/AML.
248 *
249 * Emit a message if too few or too many arguments have been passed
250 * by the caller.
251 *
252 * Note: Too many arguments will not cause the method to
253 * fail. However, the method will fail if there are too few
254 * arguments and the method attempts to use one of the missing ones.
255 */
256 AmlParamCount = Node->Object->Method.ParamCount;
257
258 if (UserParamCount < AmlParamCount)
259 {
260 ACPI_WARN_PREDEFINED ((AE_INFO, Pathname, ACPI_WARN_ALWAYS,
261 "Insufficient arguments - "
262 "Caller passed %u, method requires %u",
263 UserParamCount, AmlParamCount));
264 }
265 else if (UserParamCount > AmlParamCount)
266 {
267 ACPI_INFO_PREDEFINED ((AE_INFO, Pathname, ACPI_WARN_ALWAYS,
268 "Excess arguments - "
269 "Caller passed %u, method requires %u",
270 UserParamCount, AmlParamCount));
271 }
272
273 return;
274 }
275
276 /*
277 * This is a predefined name. Validate the user-supplied parameter
278 * count against the ACPI specification. We don't validate against
279 * the method itself because what is important here is that the
280 * caller is in conformance with the spec. (The arg count for the
281 * method was checked against the ACPI spec earlier.)
282 *
283 * Some methods are allowed to have a "minimum" number of args (_SCP)
284 * because their definition in ACPI has changed over time.
285 */
286 RequiredParamCount = METHOD_GET_ARG_COUNT (Predefined->Info.ArgumentList);
287
288 if (UserParamCount < RequiredParamCount)
289 {
290 ACPI_WARN_PREDEFINED ((AE_INFO, Pathname, ACPI_WARN_ALWAYS,
291 "Insufficient arguments - "
292 "Caller passed %u, ACPI requires %u",
293 UserParamCount, RequiredParamCount));
294 }
295 else if ((UserParamCount > RequiredParamCount) &&
296 !(Predefined->Info.ArgumentList & ARG_COUNT_IS_MINIMUM))
297 {
298 ACPI_INFO_PREDEFINED ((AE_INFO, Pathname, ACPI_WARN_ALWAYS,
299 "Excess arguments - "
300 "Caller passed %u, ACPI requires %u",
301 UserParamCount, RequiredParamCount));
302 }
303 }
304