vhost-scsi: add new rpc to enhance live recovery

After the vhost-scsi controller is started, qemu can reconnect
to spdk, but at this time the LUN may not be added to the scsi
target, struct spdk_scs

vhost-scsi: add new rpc to enhance live recovery

After the vhost-scsi controller is started, qemu can reconnect
to spdk, but at this time the LUN may not be added to the scsi
target, struct spdk_scsi_dev_vhost_state's member dev has not
been set yet, which will lead to IO error subsequently.

So we add a vhost_create_scsi_controller RPC option to create
controller but doesn't start it, and add a new RPC to start
the controller separately.

Change-Id: I1f8a78528de3073293d1c5ce2c064123519bc320
Signed-off-by: Haoqian He <haoqian.he@smartx.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/19590
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <jim.harris@samsung.com>
Community-CI: Mellanox Build Bot

show more ...

test/spdkcli: Wait until spdkcli_clear_config settled

Similarly to https://review.spdk.io/gerrit/c/spdk/spdk/+/17559, this
part may also be affected by:

Error in cmd: load_config /root/spdk/test/sp

test/spdkcli: Wait until spdkcli_clear_config settled

Similarly to https://review.spdk.io/gerrit/c/spdk/spdk/+/17559, this
part may also be affected by:

Error in cmd: load_config /root/spdk/test/spdkcli/config.json (
load_config /root/spdk/test/spdkcli/config.json
request:
{
"action_on_timeout": "none",
"timeout_us": 0,
"timeout_admin_us": 0,
"keep_alive_timeout_ms": 10000,
"transport_retry_count": 4,
"arbitration_burst": 0,
"low_priority_weight": 0,
"medium_priority_weight": 0,
"high_priority_weight": 0,
"nvme_adminq_poll_period_us": 10000,
"nvme_ioq_poll_period_us": 0,
"io_queue_requests": 1024,
"delay_cmd_submit": true,
"bdev_retry_count": 3,
"transport_ack_timeout": 0,
"ctrlr_loss_timeout_sec": 0,
"reconnect_delay_sec": 0,
"fast_io_fail_timeout_sec": 0,
"generate_uuids": false,
"transport_tos": 0,
"io_path_stat": false,
"method": "bdev_nvme_set_options",
"req_id": 31
}
Got JSON-RPC error response
response:
{
"code": -1,
"message": "RPC not permitted with nvme controllers already attached"
}

so make sure the nvme controller was fully detached.

Change-Id: Iaebed7b640d96fbabfc694dfebc5a725902caad2
Signed-off-by: Michal Berger <michal.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17850
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>

show more ...

test/spdkcli: Wait long enough for the nvme ctrl to be gone

Some nvmes need more time to attach|detach to|from, hence having a
static sleep is not ideal depending on what type of the nvme was
picked

test/spdkcli: Wait long enough for the nvme ctrl to be gone

Some nvmes need more time to attach|detach to|from, hence having a
static sleep is not ideal depending on what type of the nvme was
picked up for the test. Instead, simply wait until the list of
nvme ctrls is empty after the cleanup.

Change-Id: I2fc2630020436d0e1f6b01a5ce60aea56e7bf8ec
Signed-off-by: Michal Berger <michal.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/17559
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>

show more ...

test/spdkcli: Adjust traps

Mainly, don't trigger them on ERR, simply on EXIT - the ERR is
reserved for the main tracing trap set by autotest_common.sh and it
should not be overwritten.

Signed-off-b

test/spdkcli: Adjust traps

Mainly, don't trigger them on ERR, simply on EXIT - the ERR is
reserved for the main tracing trap set by autotest_common.sh and it
should not be overwritten.

Signed-off-by: Michal Berger <michal.berger@intel.com>
Change-Id: I435d1c08c29557692c134a087350f8538ebf92f9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16708
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>

show more ...

add (c) and SPDX header to bash files as needed

per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.

git log --follow -C90% --forma

add (c) and SPDX header to bash files as needed

per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.

git log --follow -C90% --format=%ad --date default <file> | tail -1

and then pull just the year from the result.

Intel copyrights were not added to files where Intel either had
no contribution ot the contribution lacked substance (ie license
header updates, formatting changes, etc)

For intel copyrights added, --follow and -C95% were used.

Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I2ef86976095b88a9bf5b1003e59f3943cd6bbe4c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15209
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>

show more ...

event/vhost: separate vhost subsystem to scsi and blk

Separate out SCSI and BLK vhost subsystems to later add
virtio_blk transport abstraction.

This allows for further changes to the vhost_blk, not

event/vhost: separate vhost subsystem to scsi and blk

Separate out SCSI and BLK vhost subsystems to later add
virtio_blk transport abstraction.

This allows for further changes to the vhost_blk, not
affecting vhost_scsi.

Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id1ecfeafeb936809a479a43c321e13f75cb3d5ad
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9539
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>

show more ...

script/gen_nvme: do not generate legacy configuration

gen_nvme.sh will no longer generate the legacy configuration.
"--json" option will still work for any current users of the script.

Tests were m

script/gen_nvme: do not generate legacy configuration

gen_nvme.sh will no longer generate the legacy configuration.
"--json" option will still work for any current users of the script.

Tests were modified to no longer use the "--json" option.
Meanwhile others were simplified with switch to "--json-with-subsystems".

Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8450be98660e54c64c27d8401fc40d649f9403ea
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4802
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>

show more ...

tests: Switch to $SPDK_TEST_STORAGE for writing out bigger tmp files

Change-Id: Ic400a470373fe59e89b2400af4f4264872281d64
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https:/

tests: Switch to $SPDK_TEST_STORAGE for writing out bigger tmp files

Change-Id: Ic400a470373fe59e89b2400af4f4264872281d64
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2368
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>

show more ...

test: move report_test_completion into run_test

This also requires us to change the create_test_list function to rely on
the run_test function for creating the canonical test list.

Change-Id: Ib35e

test: move report_test_completion into run_test

This also requires us to change the create_test_list function to rely on
the run_test function for creating the canonical test list.

Change-Id: Ib35e7752935a3ac83de2702b6dfbd42539027f6a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476962
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>

show more ...

test: add timing calls to run_test

And clean out the corresponding calls to timing_enter and timing_exit
from the various test scripts.

Change-Id: I0759417b5a529e4c3649ce04cca1799c089da278
Signed-o

test: add timing calls to run_test

And clean out the corresponding calls to timing_enter and timing_exit
from the various test scripts.

Change-Id: I0759417b5a529e4c3649ce04cca1799c089da278
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476804
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>

show more ...

RPC: rename destruct_split_vbdev to bdev_split_delete

Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ib1fe9c105b4dd45fd5488b74cefc2260a81fe284
Reviewed-on: https://review.gerrith

RPC: rename destruct_split_vbdev to bdev_split_delete

Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ib1fe9c105b4dd45fd5488b74cefc2260a81fe284
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468095
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>

show more ...

RPC: rename construct_split_vbdev to bdev_split_create

Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I37459e3c421e8c657f8d9a8647cdbccc4193bb58
Reviewed-on: https://review.gerrit

RPC: rename construct_split_vbdev to bdev_split_create

Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I37459e3c421e8c657f8d9a8647cdbccc4193bb58
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468089
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>

show more ...

test/spdkcli: test vhost_target show_details method

Add a match test for vhost_target show_details method.
In spdkcli source the equivalent function is `UIVhostTargetObj.show_details`.
This method i

test/spdkcli: test vhost_target show_details method

Add a match test for vhost_target show_details method.
In spdkcli source the equivalent function is `UIVhostTargetObj.show_details`.
This method is one of few that left untested in spdkcli.

This patch is related to trello task:
https://trello.com/c/CHOOxcGj/151-spdkcli-extend-test-coverage

Change-Id: I3747b0bef4a54606765c81a003bbc9e12fe32858
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463281
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>

show more ...

test/spdkcli: test vhost_ctrl show_details method

Add a match test for vhost_ctrl show_details method.
In spdkcli source the equivalent function is `UIVhostCtrl.show_details`.
This method is one of

test/spdkcli: test vhost_ctrl show_details method

Add a match test for vhost_ctrl show_details method.
In spdkcli source the equivalent function is `UIVhostCtrl.show_details`.
This method is one of few that left untested in spdkcli.

This patch is related to trello task:
https://trello.com/c/CHOOxcGj/151-spdkcli-extend-test-coverage

Change-Id: I4f13f863bdc815430c5fb2b67b12056f01201f8c
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462860
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>

show more ...

test/spdkcli: test set_coalescing method

Add spdkcli command that will invoke set_coalescing method
during vhost test.
This is the only usage of set_coalescing in our tests,
so it would be nice

test/spdkcli: test set_coalescing method

Add spdkcli command that will invoke set_coalescing method
during vhost test.
This is the only usage of set_coalescing in our tests,
so it would be nice to at least have an invocation of it.

Following commits will add a match-test that will check if
set_coalescing worked as expected.

This patch is related to trello task:
https://trello.com/c/CHOOxcGj/151-spdkcli-extend-test-coverage

Change-Id: I15f54d92c4af2cf3f400743425e268b3645a5b3c
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462859
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>

show more ...

test/spdkcli: dont use -v flag for app/match

app/match/match with -v flag prints content of the files
even if match is successful. Such output is usually big
and not useful, so it is better to p

test/spdkcli: dont use -v flag for app/match

app/match/match with -v flag prints content of the files
even if match is successful. Such output is usually big
and not useful, so it is better to print content only
for failed cases.
This patch removes -v flag for match program
to achieve described desired behaviour.

Change-Id: I3e2f24e35f5fa3aeead2e3945a44053bc9ff3240
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462023
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>

show more ...

test/spdkcli: test lvol_stores show_details method

Add a match test for lvol_stores show_details methods.
This method is one of few ones that left untested in spdkcli.

Change-Id: I86197dace4cb40b10

test/spdkcli: test lvol_stores show_details method

Add a match test for lvol_stores show_details methods.
This method is one of few ones that left untested in spdkcli.

Change-Id: I86197dace4cb40b108f61a138be01f095a38e97a
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461558
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>

show more ...

test/spdkcli: cleanup includes

autotest_common.sh used to be sourced from
test/spdkcli/common.sh (and it still is - we'll clean
it up in a separate patch). Let's source that file in
each spdkcli tes

test/spdkcli: cleanup includes

autotest_common.sh used to be sourced from
test/spdkcli/common.sh (and it still is - we'll clean
it up in a separate patch). Let's source that file in
each spdkcli test script, just like we do in every
other test script.

Change-Id: I2e021bcda7402ee0c5a4a5f45f921bb0142b6783
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458176
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>

show more ...

test: consolidate tests for reading JSON config

This patch rework all JSON config file reading tests. This is needed as
current approach will require to modify each test to re-launch SPDK
applicatio

test: consolidate tests for reading JSON config

This patch rework all JSON config file reading tests. This is needed as
current approach will require to modify each test to re-launch SPDK
applications for each test type. This is hard to do because tests are
not flexible and will require to be rewritten almost from scratch. Not
metioning time to relaunch each test separatly.

Instead, just replace all old tests with one test. Launch only one
target and only one initiator. Then configure it using RPC calls. Then
config is dumped and target and initiator application is relaunched to
reread the configuration from file. Then config is dumped again and
compared.

Change-Id: Id857089aed0e6f2197cbf3ae625a4e9f4b13e8bb
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/432318
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>

show more ...

test/spdkcli: Run different parts of tests with given spdk target.

Use nvmf_tgt for nvmf tests.
Use iscsi_tgt for spdkcli iscsi tests.
Use vhost target for spdkcli vhost tests.
Fixes #511.

Change-I

test/spdkcli: Run different parts of tests with given spdk target.

Use nvmf_tgt for nvmf tests.
Use iscsi_tgt for spdkcli iscsi tests.
Use vhost target for spdkcli vhost tests.
Fixes #511.

Change-Id: I5f084bccf87d32b0ede210c62ccc4a2f7926d716
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/435139
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>

show more ...

test/spdkcli: Reduce execution time for spdkcli tests

Pass many spdkcli commands to spdkcli_job.py

Change-Id: I0cf5840fdf7183febff1872c7fc8d1cb303a06f1
Signed-off-by: Pawel Kaminski <pawelx.kaminsk

test/spdkcli: Reduce execution time for spdkcli tests

Pass many spdkcli commands to spdkcli_job.py

Change-Id: I0cf5840fdf7183febff1872c7fc8d1cb303a06f1
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/435891
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>

show more ...

test/spdkcli: Possibility to remove all lvol stores from lvol_store node

Change-Id: Iced2a79b5d0cfb1aff55c9aec29b7bc68fc3388e
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: h

test/spdkcli: Possibility to remove all lvol stores from lvol_store node

Change-Id: Iced2a79b5d0cfb1aff55c9aec29b7bc68fc3388e
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/434796
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>

show more ...

test/spdkcli: Add possibility to delete all bdevs
for subnodes (aio, error, logical_volume, etc)
from bdev node

Change-Id: I346437da6cff6b0df6dc8a579da09e77bcddf610
Signe

test/spdkcli: Add possibility to delete all bdevs
for subnodes (aio, error, logical_volume, etc)
from bdev node

Change-Id: I346437da6cff6b0df6dc8a579da09e77bcddf610
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/430074
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>

show more ...

test/spdkcli: Add load and save config commands.

Change-Id: I499f54b025080ad1916acc0cf265a58c806da002
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.

test/spdkcli: Add load and save config commands.

Change-Id: I499f54b025080ad1916acc0cf265a58c806da002
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/428494
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>

show more ...

scripts: use python3 in all scripts

This it to prepare for RPM package. Also lower number of dependencies
needed by SPDK tools.

Update changelog to deprecate Python 2 and explicit interpeter invoki

scripts: use python3 in all scripts

This it to prepare for RPM package. Also lower number of dependencies
needed by SPDK tools.

Update changelog to deprecate Python 2 and explicit interpeter invoking
in scripts.

Change-Id: I2497cca721cbcbadc1c99c675f8b8b7f682d5efa
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/425233
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>

show more ...