round_blocksize must return a multiple of the framesize.
aucc(4) supports 3 channels mode.

The device does not support recording.
Fix diagnostic assertion failure in aucc_set_format().

OK isaki

XXX
pullup to netbsd-9

Clean get_props().
- Make get_props() return AUDIO_PROP_{PLAYBACK,CAPTURE} properly.
This eliminates need for audio.c to take care of such (old)
drivers which don't return both of PLAYBACK and CA

Clean get_props().
- Make get_props() return AUDIO_PROP_{PLAYBACK,CAPTURE} properly.
This eliminates need for audio.c to take care of such (old)
drivers which don't return both of PLAYBACK and CAPTURE.
- All get_props() doesn't need to return AUDIO_PROP_MMAP.
It is handled in the audio layer now.

show more ...

Merge isaki-audio2 branch, the overhaul of audio subsystem.
- Interrupt-oriented system rather than thread-oriented.
- Improve stability, quality and performance.
- Split playback and record cleanly.

Merge isaki-audio2 branch, the overhaul of audio subsystem.
- Interrupt-oriented system rather than thread-oriented.
- Improve stability, quality and performance.
- Split playback and record cleanly. Improve halfduplex support.
- Many bugs are fixed including deadlocks, resource leaks, abuses, etc.
- Simplify audio filter mechanism. The encoding/channels/frequency
conversions are completely handled in the upper layer. So the hard-
ware driver only converts its hardware encoding (if necessary).
- audio_hw_if changes:
- Obsoletes query_encoding and add query_format instead.
- Obsoletes set_params and add set_format instead.
- Remove drain, setfd, mappage.
- The call sequences are changed.
- ioctl AUDIO_GETFD/SETFD, AUDIO_GETCHAN/SETCHAN are obsoleted.
- ioctl AUDIO_{QUERY,GET,SET}FORMAT are introduced.
- cleanup config attributes: au*conv and mulaw.
- All hardware drivers should follow it (I've done as much as possible).

Some file paths are changed:
- dev/audio.c -> dev/audio/audio.c (rewritten)
- dev/audiovar.h -> dev/audio/audiovar.h
- dev/audio_dai.h -> dev/audio/audio_dai.h
- dev/audio_if.h -> dev/audio/audio_if.h
- dev/audiobell.c -> dev/audio/audiobell.c
- dev/audiobellvar.h -> dev/audio/audiobellvar.h
- dev/mulaw.[ch] -> dev/audio/mulaw.[ch] + dev/audio/alaw.c

show more ...

Use C99 style struct initializer to audio_hw_if.

kill sprintf
fix unused variables

split device_t/softc for all remaining drivers.
replace "struct device *" with "device_t".
use device_xname(), device_unit(), etc.

Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From
the original ad-audiomp branch notes:

Add MP locking to the audio drivers.

Making the audio drivers MP safe is necessary

Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From
the original ad-audiomp branch notes:

Add MP locking to the audio drivers.

Making the audio drivers MP safe is necessary before efforts
can be made to make the VM system MP safe.

The are two locks per device instance, an ISR lock and
a character device lock. The ISR lock replaces calls to
splaudio()/splx(), and will be held across calls to device
methods which were called at splaudio() before (e.g.
trigger_output). The character device lock is held across
calls to nearly all of the methods, excluding some only
used for initialization, e.g. get_locks.

Welcome to 5.99.57.

show more ...

Use the SI capitalization for "Hz", "kHz", and "MHz" in comments and strings.
Add a space between numbers and Hz unit.

merge ktrace-lwp.

No 0x in front of %p...

ansify and KNF

merge kent-audio1 branch, which introduces audio filter pipeline to the MI
audio framework


Summary of changes:

* struct audio_params
- remove sw_code, factor, factor_denom, hw_sample_rate,
hw_en

merge kent-audio1 branch, which introduces audio filter pipeline to the MI
audio framework


Summary of changes:

* struct audio_params
- remove sw_code, factor, factor_denom, hw_sample_rate,
hw_encoding ,hw_precision, and hw_channels. Conversion information
is conveyed by stream_filter_list_t.
- change the type of sample_rate: u_long -> u_int
- add `validbits,' which represents the valid data size in
precision bits. It is required in order to distinguish 24/32bit
from 24/24bit or 32/32bit.

* audio_hw_if
- add two parameters to set_params()
stream_filter_list_t *pfil, stream_filter_list *rfil
A HW driver should set filter recipes for requested formats
- constify audio_params parameters of trigger_output() and
trigger_input(). They represent audio formats for the hardware.
- make open() and close() optional
- add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters
to round_blocksize()

* sw_code is replaced with stream_filter_t.
stream_filer_t converts audio data in an input buffer and writes
into another output buffer unlike sw_code, which converts data in
single buffer.
converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c,
dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are
reimplemented as stream_filter_t

* MI audio
- audiosetinfo() builds filter pipelines from stream_filter_list_t
filled by audio_hw_if::set_params()
- audiosetinfo() returns with EINVAL if mmapped and set_params()
requests filters
- audio_write(), audio_pint(), and audio_rint() invoke a filter
pipeline.
- ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS,
AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for
AUDIO_GETINFO handle values for a buffer nearest to userland.

* add `struct device *' parameter to ac97_attach()

* all of audio HW drivers follow audio_hw_if and ac97 changes

show more ...

constify audio_hw_if, midi_hw_if, and radio_hw_if.

DMA, not dma nor Dma.

Respect the law: Use A-law and mu-law as spellings as far as easily possible.
Inspired by Igor Sobrado in PR 19680.

Use CFATTACH_DECL().

Declare all cfattach structures const.

add __KERNEL_RCSID as suggested by Luke Mewburn

- ANSIfy
- remove some trailing spaces/tabs
- minor style nits

Add a new optional method, dev_ioctl, to the audio hardware driver interface.
It is called when an unrecognized ioctl() is performed on a device,
thus allowing ioctl()s that frob the hardware driver

Add a new optional method, dev_ioctl, to the audio hardware driver interface.
It is called when an unrecognized ioctl() is performed on a device,
thus allowing ioctl()s that frob the hardware driver (like loading
microcode).

show more ...

defopt LEV6_DEFER.

Use the correct DMA pointer for the second channel on 14-bit byte-swapped
conversion. Fixes NULL pointer reference crash when playing 16 bit little
endian audio.

Kill more broken cf_unit bogons.

Modifications to aucc.c for more input formats and 14bit stereo output.
By Bernardo Innocenti, submitted as PR 6787.
Some KNF-ifying done by myself, so you might want to blame me instead
if the origi

Modifications to aucc.c for more input formats and 14bit stereo output.
By Bernardo Innocenti, submitted as PR 6787.
Some KNF-ifying done by myself, so you might want to blame me instead
if the original patch worked for you.
-is

show more ...