[SCCP] Convert tests to opaque pointers (NFC)

Conversion was performed using
https://gist.github.com/nikic/98357b71fd67756b0f064c9517b62a34
plus manual (but uninteresting) fixup.

[test] Use -passes syntax when specifying pipeline in some more tests

The legacy PM is deprecated, so update a bunch of lit tests running
opt to use the new PM syntax when specifying the pipeline.
I

[test] Use -passes syntax when specifying pipeline in some more tests

The legacy PM is deprecated, so update a bunch of lit tests running
opt to use the new PM syntax when specifying the pipeline.
In this patch focus has been put on test cases for ConstantMerge,
ConstraintElimination, CorrelatedValuePropagation, GlobalDCE,
GlobalOpt, SCCP, TailCallElim and PredicateInfo.

Differential Revision: https://reviews.llvm.org/D114516

show more ...

Revert "Temporarily Revert "Add basic loop fusion pass.""

The reversion apparently deleted the test/Transforms directory.

Will be re-reverting again.

llvm-svn: 358552

[opaque pointer type] Add textual IR support for explicit type parameter to load instruction

Essentially the same as the GEP change in r230786.

A similar migration script can be used to update test

[opaque pointer type] Add textual IR support for explicit type parameter to load instruction

Essentially the same as the GEP change in r230786.

A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)

import fileinput
import sys
import re

pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")

for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7649

llvm-svn: 230794

show more ...

[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction

One of several parallel first steps to remove the target type of pointers,
replacing them with a

[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction

One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.

This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.

* This doesn't modify gep operators, only instructions (operators will be
handled separately)

* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.

* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.

* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x

Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.

update.py:
import fileinput
import sys
import re

ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")

def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line

for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)

apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done

The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh

After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).

The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7636

llvm-svn: 230786

show more ...

Change tests from "opt %s" to "opt < %s" so that opt doesn't see the
input filename so that opt doesn't print the input filename in the
output so that grep lines in the tests don't unintentionally ma

Change tests from "opt %s" to "opt < %s" so that opt doesn't see the
input filename so that opt doesn't print the input filename in the
output so that grep lines in the tests don't unintentionally match
strings in the input filename.

llvm-svn: 81537

show more ...

Use opt -S instead of piping bitcode output through llvm-dis.

llvm-svn: 81257

Change these tests to feed the assembly files to opt directly, instead
of using llvm-as, now that opt supports this.

llvm-svn: 81226

Split the Add, Sub, and Mul instruction opcodes into separate
integer and floating-point opcodes, introducing
FAdd, FSub, and FMul.

For now, the AsmParser, BitcodeReader, and IRBuilder all preserve

Split the Add, Sub, and Mul instruction opcodes into separate
integer and floating-point opcodes, introducing
FAdd, FSub, and FMul.

For now, the AsmParser, BitcodeReader, and IRBuilder all preserve
backwards compatability, and the Core LLVM APIs preserve backwards
compatibility for IR producers. Most front-ends won't need to change
immediately.

This implements the first step of the plan outlined here:
http://nondot.org/sabre/LLVMNotes/IntegerOverflow.txt

llvm-svn: 72897

show more ...

For PR1319:
Upgrade to use new Tcl exec based test harness. This exposes 3 bugs that
were previously not being reported:
test/Transforms/GlobalDCE/2002-08-17-FunctionDGE.ll
test/Transforms/GlobalOpt/

For PR1319:
Upgrade to use new Tcl exec based test harness. This exposes 3 bugs that
were previously not being reported:
test/Transforms/GlobalDCE/2002-08-17-FunctionDGE.ll
test/Transforms/GlobalOpt/memset.ll
test/Transforms/IndVarsSimplify/exit_value_tests.llx

llvm-svn: 36065

show more ...

Add the SCCP regression tests for APInt expressions. These test cases
turned up some regressions that have since been fixed. We don't want to
loose the regression tests.

Test cases by Guoling Han.

Add the SCCP regression tests for APInt expressions. These test cases
turned up some regressions that have since been fixed. We don't want to
loose the regression tests.

Test cases by Guoling Han.

llvm-svn: 35974

show more ...