[X86] Migrate tests to use opaque pointers (NFC)

Test updates were performed using:
https://gist.github.com/nikic/98357b71fd67756b0f064c9517b62a34

These are only the test updates where the test pas

[X86] Migrate tests to use opaque pointers (NFC)

Test updates were performed using:
https://gist.github.com/nikic/98357b71fd67756b0f064c9517b62a34

These are only the test updates where the test passed without
further modification (which is almost all of them, as the backend
is largely pointer-type agnostic).

show more ...

[CodeGen] Print register names in lowercase in both MIR and debug output

As part of the unification of the debug format and the MIR format,
always print registers as lowercase.

* Only debug printin

[CodeGen] Print register names in lowercase in both MIR and debug output

As part of the unification of the debug format and the MIR format,
always print registers as lowercase.

* Only debug printing is affected. It now follows MIR.

Differential Revision: https://reviews.llvm.org/D40417

llvm-svn: 319187

show more ...

[StackMaps] Increase the size of the "location size" field

Summary:
In some cases LLVM (especially the SLP vectorizer) will create vectors
that are 256 bytes (or larger). Given that this is intenti

[StackMaps] Increase the size of the "location size" field

Summary:
In some cases LLVM (especially the SLP vectorizer) will create vectors
that are 256 bytes (or larger). Given that this is intentional[0] is
likely to get more common, this patch updates the StackMap binary
format to deal with the spill locations for said vectors.

This change also bumps the stack map version from 2 to 3.

[0]: https://reviews.llvm.org/D32533#738350

Reviewers: reames, kavon, skatkov, javed.absar

Subscribers: mcrosier, nemanjai, llvm-commits

Differential Revision: https://reviews.llvm.org/D32629

llvm-svn: 301615

show more ...

[Stackmap] Added callsite counts to emitted function information.

Summary:
It was previously not possible for tools to use solely the stackmap
information emitted to reconstruct the return addresses

[Stackmap] Added callsite counts to emitted function information.

Summary:
It was previously not possible for tools to use solely the stackmap
information emitted to reconstruct the return addresses of callsites in
the map, which is necessary to use the information to walk a stack. This
patch adds per-function callsite counts when emitting the stackmap
section in order to resolve the problem. Note that this slightly alters
the stackmap format, so external tools parsing these maps will need to
be updated.

**Problem Details:**
Records only store their offset from the beginning of the function they
belong to. While these records and the functions are output in program
order, it is not possible to determine where the end of one function's
records are without the callsite count when processing the records to
compute return addresses.

Patch by Kavon Farvardin!

Reviewers: atrick, ributzka, sanjoy

Subscribers: nemanjai

Differential Revision: https://reviews.llvm.org/D23487

llvm-svn: 281532

show more ...

[opaque pointer type] Add textual IR support for explicit type parameter to the call instruction

See r230786 and r230794 for similar changes to gep and load
respectively.

Call is a bit different be

[opaque pointer type] Add textual IR support for explicit type parameter to the call instruction

See r230786 and r230794 for similar changes to gep and load
respectively.

Call is a bit different because it often doesn't have a single explicit
type - usually the type is deduced from the arguments, and just the
return type is explicit. In those cases there's no need to change the
IR.

When that's not the case, the IR usually contains the pointer type of
the first operand - but since typed pointers are going away, that
representation is insufficient so I'm just stripping the "pointerness"
of the explicit type away.

This does make the IR a bit weird - it /sort of/ reads like the type of
the first operand: "call void () %x(" but %x is actually of type "void
()*" and will eventually be just of type "ptr". But this seems not too
bad and I don't think it would benefit from repeating the type
("void (), void () * %x(" and then eventually "void (), ptr %x(") as has
been done with gep and load.

This also has a side benefit: since the explicit type is no longer a
pointer, there's no ambiguity between an explicit type and a function
that returns a function pointer. Previously this case needed an explicit
type (eg: a function returning a void() function was written as
"call void () () * @x(" rather than "call void () * @x(" because of the
ambiguity between a function returning a pointer to a void() function
and a function returning void).

No ambiguity means even function pointer return types can just be
written alone, without writing the whole function's type.

This leaves /only/ the varargs case where the explicit type is required.

Given the special type syntax in call instructions, the regex-fu used
for migration was a bit more involved in its own unique way (as every
one of these is) so here it is. Use it in conjunction with the apply.sh
script and associated find/xargs commands I've provided in rr230786 to
migrate your out of tree tests. Do let me know if any of this doesn't
cover your cases & we can iterate on a more general script/regexes to
help others with out of tree tests.

About 9 test cases couldn't be automatically migrated - half of those
were functions returning function pointers, where I just had to manually
delete the function argument types now that we didn't need an explicit
function type there. The other half were typedefs of function types used
in calls - just had to manually drop the * from those.

import fileinput
import sys
import re

pat = re.compile(r'((?:=|:|^|\s)call\s(?:[^@]*?))(\s*$|\s*(?:(?:\[\[[a-zA-Z0-9_]+\]\]|[@%](?:(")?[\\\?@a-zA-Z0-9_.]*?(?(3)"|)|{{.*}}))(?:\(|$)|undef|inttoptr|bitcast|null|asm).*$)')
addrspace_end = re.compile(r"addrspace\(\d+\)\s*\*$")
func_end = re.compile("(?:void.*|\)\s*)\*$")

def conv(match, line):
if not match or re.search(addrspace_end, match.group(1)) or not re.search(func_end, match.group(1)):
return line
return line[:match.start()] + match.group(1)[:match.group(1).rfind('*')].rstrip() + match.group(2) + line[match.end():]

for line in sys.stdin:
sys.stdout.write(conv(re.search(pat, line), line))

llvm-svn: 235145

show more ...

Change the fast-isel-abort option from bool to int to enable "levels"

Summary:
Currently fast-isel-abort will only abort for regular instructions,
and just warn for function calls, terminators, func

Change the fast-isel-abort option from bool to int to enable "levels"

Summary:
Currently fast-isel-abort will only abort for regular instructions,
and just warn for function calls, terminators, function arguments.
There is already fast-isel-abort-args but nothing for calls and
terminators.

This change turns the fast-isel-abort options into an integer option,
so that multiple levels of strictness can be defined.
This will help no being surprised when the "abort" option indeed does
not abort, and enables the possibility to write test that verifies
that no intrinsics are forgotten by fast-isel.

Reviewers: resistor, echristo

Subscribers: jfb, llvm-commits

Differential Revision: http://reviews.llvm.org/D7941

From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 230775

show more ...

[Stackmaps] Make ithe frame-pointer required for stackmaps.

Do not eliminate the frame pointer if there is a stackmap or patchpoint in the
function. All stackmap references should be FP relative.

T

[Stackmaps] Make ithe frame-pointer required for stackmaps.

Do not eliminate the frame pointer if there is a stackmap or patchpoint in the
function. All stackmap references should be FP relative.

This fixes PR21107.

llvm-svn: 218920

show more ...

[FastISel] Add support for the stackmap intrinsic.

This implements target-independent FastISel lowering for the stackmap intrinsic.

llvm-svn: 210742