[SCEV] Print predicate backedge count only if new information available

When printing the result of SCEV's analysis, we can avoid printing
the predicated backedge taken count and the predicates if t

[SCEV] Print predicate backedge count only if new information available

When printing the result of SCEV's analysis, we can avoid printing
the predicated backedge taken count and the predicates if the predicates
are empty and no new information is provided. This helps to reduce the
verbosity of the output.

show more ...

[SCEV] Include type when printing constant max backedge taken count

When printing the result of the analysis, i8 -1 and i64 -1 are quite
different in terms of analysis quality. In a recent conversi

[SCEV] Include type when printing constant max backedge taken count

When printing the result of the analysis, i8 -1 and i64 -1 are quite
different in terms of analysis quality. In a recent conversion with
a new contributor, we ran into exactly this confusion.

Adding the type for constant scevs more globally seems worthwhile, but
introduces a much larger test diff. I'm splitting this off first since
it addresses the immediate need, and then going to do some further
changes to clarify a few related bits of analysis result output.

show more ...

[SCEV] Regenerate test checks (NFC)

There have been some minor but pervasive changes to the generated
CHECK lines, so regenerate all of them, to minimize future diffs.

[SCEV] Add printout of symbolic max backedge-taken and block exit count

We do compute it and use in optimizations, but never print it out. We need
to do it in order to be able to track improvements

[SCEV] Add printout of symbolic max backedge-taken and block exit count

We do compute it and use in optimizations, but never print it out. We need
to do it in order to be able to track improvements in its computation.

show more ...

[SCEV] Rename max backedge-taken count -> constant max backedge taken-count in printout

This is a preparatory step for introducing symbolic max backedge-taken count.

[SCEV] (udiv X, Y) * Y is always NUW

Motivated by the removal done in D109782. This implements the correct flag part generically.

Differential Revision: https://reviews.llvm.org/D109786

[test][NewPM] Remove RUN lines using -analyze

Only tests in llvm/test/Analysis.

-analyze is legacy PM-specific.

This only touches files with `-passes`.

I looked through everything and made sure t

[test][NewPM] Remove RUN lines using -analyze

Only tests in llvm/test/Analysis.

-analyze is legacy PM-specific.

This only touches files with `-passes`.

I looked through everything and made sure that everything had a new PM equivalent.

Reviewed By: MaskRay

Differential Revision: https://reviews.llvm.org/D109040

show more ...

[SCEV] Use both known bits and sign bits when computing range of SCEV unknowns

When computing a range for a SCEVUnknown, today we use computeKnownBits for unsigned ranges, and computeNumSignBots for

[SCEV] Use both known bits and sign bits when computing range of SCEV unknowns

When computing a range for a SCEVUnknown, today we use computeKnownBits for unsigned ranges, and computeNumSignBots for signed ranges. This means we miss opportunities to improve range results.

One common missed pattern is that we have a signed range of a value which CKB can determine is positive, but CNSB doesn't convey that information. The current range includes the negative part, and is thus double the size.

Per the removed comment, the original concern which delayed using both (after some code merging years back) was a compile time concern. CTMark results (provided by Nikita, thanks!) showed a geomean impact of about 0.1%. This doesn't seem large enough to avoid higher quality results.

Differential Revision: https://reviews.llvm.org/D96534

show more ...

[tests] Autogen a few tests for ease of update

[SCEV] Fix ScalarEvolution tests under NPM

Many tests use opt's -analyze feature, which does not translate well to
NPM and has better alternatives. The alternative here is to explicitly
add a pass t

[SCEV] Fix ScalarEvolution tests under NPM

Many tests use opt's -analyze feature, which does not translate well to
NPM and has better alternatives. The alternative here is to explicitly
add a pass that calls ScalarEvolution::print().

The legacy pass manager RUNs aren't changing, but they are now pinned to
the legacy pass manager. For each legacy pass manager RUN, I added a
corresponding NPM RUN using the 'print<scalar-evolution>' pass. For
compatibility with update_analyze_test_checks.py and existing test
CHECKs, 'print<scalar-evolution>' now prints what -analyze prints per
function.

This was generated by the following Python script and failures were
manually fixed up:

import sys
for i in sys.argv:
with open(i, 'r') as f:
s = f.read()
with open(i, 'w') as f:
for l in s.splitlines():
if "RUN:" in l and ' -analyze ' in l and '\\' not in l:
f.write(l.replace(' -analyze ', ' -analyze -enable-new-pm=0 '))
f.write('\n')
f.write(l.replace(' -analyze ', ' -disable-output ').replace(' -scalar-evolution ', ' "-passes=print<scalar-evolution>" ').replace(" | ", " 2>&1 | "))
f.write('\n')
else:
f.write(l)

There are a couple failures still in ScalarEvolution under NPM, but
those are due to other unrelated naming conflicts.

Reviewed By: asbirlea

Differential Revision: https://reviews.llvm.org/D83798

show more ...

[SCEV] Fix an assertion failure in the max backedge taken count

Max backedge taken count is always expected to be a constant; and this is
usually true by construction -- it is a SCEV expression with

[SCEV] Fix an assertion failure in the max backedge taken count

Max backedge taken count is always expected to be a constant; and this is
usually true by construction -- it is a SCEV expression with constant inputs.
However, if the max backedge expression ends up being computed to be a udiv with
a constant zero denominator[0], SCEV does not fold the result to a constant
since there is no constant it can fold it to (SCEV has no representation for
"infinity" or "undef").

However, in computeMaxBECountForLT we already know the denominator is positive,
and thus at least 1; and we can use this fact to avoid dividing by zero.

[0]: We can end up with a constant zero denominator if the signed range of the
stride is more precise than the unsigned range.

llvm-svn: 316615

show more ...