Revert "[DwarfDebug] Support emitting function-local declaration for a lexical block" & dependent patches

Try to revert D113741 once again.

This also reverts 0ac75e82fff93a80ca401d3db3541e8d1d9098f

Revert "[DwarfDebug] Support emitting function-local declaration for a lexical block" & dependent patches

Try to revert D113741 once again.

This also reverts 0ac75e82fff93a80ca401d3db3541e8d1d9098f9 (D114705)
as it causes LLDB's lldb-api.lang/cpp/nsimport.TestCppNsImport.py test
failure w/o D113741.

This reverts commit f9607d45f399e2afc39ec16222ea68b4e0831564.

Differential Revision: https://reviews.llvm.org/D116225

show more ...

Reland [DwarfDebug] Move emission of global vars, types and imports to endModule()

This patch proposes to move emission of global variables, types,
imported entities, etc from DwarfDebug::beginModul

Reland [DwarfDebug] Move emission of global vars, types and imports to endModule()

This patch proposes to move emission of global variables, types,
imported entities, etc from DwarfDebug::beginModule() to DwarfDebug::endModule().
Effectively, this changes nothing but the order of debug entities which
will be as follows:
* subprograms (including related context, local variables/labels,
local imported entities; related types can be created as a part of
the emission of local entities of an abstract subprogram);
* global variables (including related context and types);
* retained types and enums;
* non-local-scoped imported entities;
* basic types;
* other types left (as a part of local variables attributes emission).

Note that the order of emitted compile units may also be changed as now we emit
units that contain subprograms first and then all other non-empty units.

The motivation behind this change is the following:
(1) DwarfDebug::beginModule() is run at the very beginning of backend's pipeline,
from this time IR can be significantly changed by target-specific passes.
If it happens for debug metadata of global entities, those changes will not
be reflected in the emitted DWARF.
(2) imported subprogram names should refer to an abstract subprogram if it exists,
but it isn't known in DwarfDebug::beginModule() (it's possible to make some
guesses based on location info, but it's not quite reliable);
(3) aforementioned entities if they are scoped within a bracketed block
(subject of D113741) couldn't be emitted in DwarfDebug::beginModule()
(they need parent emitted first). Another problem is if to try to gather
some information about local entities and defer their emission
(till subprogram's processing or DwarfDebug::endModule()) all the gathered
details might be irrelevant / invalid by the time the entities are being
emitted (because of (1)).

Reviewed By: dblaikie

Differential Revision: https://reviews.llvm.org/D114705

show more ...

Revert "[DwarfDebug] Support emitting function-local declaration for a lexical block"

This reverts commits
* ee691970a9a85470948ada623c31f0ab8773617c (D113741),
* 79d3132998b2828be8f7d2ec411f91fb11b

Revert "[DwarfDebug] Support emitting function-local declaration for a lexical block"

This reverts commits
* ee691970a9a85470948ada623c31f0ab8773617c (D113741),
* 79d3132998b2828be8f7d2ec411f91fb11b3e01f (D114705)

due to lldb and dexter test failures.

show more ...

[DwarfDebug] Move emission of global vars, types and imports to endModule()

This patch proposes to move emission of global variables, types,
imported entities, etc from DwarfDebug::beginModule() to

[DwarfDebug] Move emission of global vars, types and imports to endModule()

This patch proposes to move emission of global variables, types,
imported entities, etc from DwarfDebug::beginModule() to DwarfDebug::endModule().
Effectively, this changes nothing but the order of debug entities which
will be as follows:
* subprograms (including related context, local variables/labels,
local imported entities; related types can be created as a part of
the emission of local entities of an abstract subprogram);
* global variables (including related context and types);
* retained types and enums;
* non-local-scoped imported entities;
* basic types;
* other types left (as a part of local variables attributes emission).

Note that the order of emitted compile units may also be changed as now we emit
units that contain subprograms first and then all other non-empty units.

The motivation behind this change is the following:
(1) DwarfDebug::beginModule() is run at the very beginning of backend's pipeline,
from this time IR can be significantly changed by target-specific passes.
If it happens for debug metadata of global entities, those changes will not
be reflected in the emitted DWARF.
(2) imported subprogram names should refer to an abstract subprogram if it exists,
but it isn't known in DwarfDebug::beginModule() (it's possible to make some
guesses based on location info, but it's not quite reliable);
(3) aforementioned entities if they are scoped within a bracketed block
(subject of D113741) couldn't be emitted in DwarfDebug::beginModule()
(they need parent emitted first). Another problem is if to try to gather
some information about local entities and defer their emission
(till subprogram's processing or DwarfDebug::endModule()) all the gathered
details might be irrelevant / invalid by the time the entities are being
emitted (because of (1)).

Reviewed By: dblaikie

Differential Revision: https://reviews.llvm.org/D114705

show more ...

Fix lld test after dwarfdump array syntax change

DebugInfo: Fix a few bot failures for type dumping fixes

[WebAssembly] Fixed byval args missing DWARF DW_AT_LOCATION

A struct in C passed by value did not get debug information. Such values are currently
lowered to a Wasm local even in -O0 (not to an allo

[WebAssembly] Fixed byval args missing DWARF DW_AT_LOCATION

A struct in C passed by value did not get debug information. Such values are currently
lowered to a Wasm local even in -O0 (not to an alloca like on other archs), which becomes
a Target Index operand (TI_LOCAL). The DWARF writing code was not emitting locations
in for TI's specifically if the location is a single range (not a list).

In addition, the ExplicitLocals pass which removes the ARGUMENT pseudo instructions did
not update the associated DBG_VALUEs, and couldn't even find these values since the code
assumed such instructions are adjacent, which is not the case here.

Also fixed asm printing of TIs needed by a test.

Differential Revision: https://reviews.llvm.org/D94140

show more ...

[lld] Use -1 as tombstone value for discarded code ranges

Under existing behavior discarded functions are relocated to have the start pc
0. This causes problems when debugging as they typically over

[lld] Use -1 as tombstone value for discarded code ranges

Under existing behavior discarded functions are relocated to have the start pc
0. This causes problems when debugging as they typically overlap the first
function and lldb symbol resolution frequently chooses a discarded function
instead of the correct one. Using the value -1 or -2 (depending on which DWARF
section we are writing) is sufficient to prevent lldb from resolving to these
symbols.

Reviewed By: MaskRay, yurydelendik, sbc100

Differential Revision: https://reviews.llvm.org/D91803

show more ...

Revert "[DebugInfo] Remove dots from getFilenameByIndex return value"

This is failing on Windows bots due to path separator normalization.

This reverts commit 042c23506869b4ae9a49d2c4bc5ea6e6baeabe

Revert "[DebugInfo] Remove dots from getFilenameByIndex return value"

This is failing on Windows bots due to path separator normalization.

This reverts commit 042c23506869b4ae9a49d2c4bc5ea6e6baeabe78.

show more ...

[NFC][DebugInfo] Use consistent regex group spelling

This is a follow up to c1f2fb5184ca.

[DebugInfo] Support both forward and backward slashes in tests

This addresses test failure revealed by 042c23506869.

[WebAssembly] Add int32 DW_OP_WASM_location variant

This to allow us to add reloctable global indices as a symbol.
Also adds R_WASM_GLOBAL_INDEX_I32 relocation type to support it.

See discussion in

[WebAssembly] Add int32 DW_OP_WASM_location variant

This to allow us to add reloctable global indices as a symbol.
Also adds R_WASM_GLOBAL_INDEX_I32 relocation type to support it.

See discussion in https://github.com/WebAssembly/debugging/issues/12

show more ...

[WebAssembly] Track frame registers through VReg and local allocation

This change has 2 components:

Target-independent: add a method getDwarfFrameBase to TargetFrameLowering. It
describes how the D

[WebAssembly] Track frame registers through VReg and local allocation

This change has 2 components:

Target-independent: add a method getDwarfFrameBase to TargetFrameLowering. It
describes how the Dwarf frame base will be encoded. That can be a register (the
default), the CFA (which replaces NVPTX-specific logic in DwarfCompileUnit), or
a DW_OP_WASM_location descriptr.

WebAssembly: Allow WebAssemblyFunctionInfo::getFrameRegister to return the
correct virtual register instead of FP32/SP32 after WebAssemblyReplacePhysRegs
has run. Make WebAssemblyExplicitLocals store the local it allocates for the
frame register. Use this local information to implement getDwarfFrameBase

The result is that the DW_AT_frame_base attribute is correctly encoded for each
subprogram, and each param and local variable has a correct DW_AT_location that
uses DW_OP_fbreg to refer to the frame base.

This is a reland of rG3a05c3969c18 with fixes for the expensive-checks
and Windows builds

Differential Revision: https://reviews.llvm.org/D71681

show more ...

Revert "[WebAssembly] Track frame registers through VReg and local allocation"

This reverts commit 3a05c3969c18b5520e360b78fc63cda39a6be98f.
It breaks under expensive-checks and on Windows

[WebAssembly] Track frame registers through VReg and local allocation

This change has 2 components:

Target-independent: add a method getDwarfFrameBase to TargetFrameLowering. It
describes how the D

[WebAssembly] Track frame registers through VReg and local allocation

This change has 2 components:

Target-independent: add a method getDwarfFrameBase to TargetFrameLowering. It
describes how the Dwarf frame base will be encoded. That can be a register (the
default), the CFA (which replaces NVPTX-specific logic in DwarfCompileUnit), or
a DW_OP_WASM_location descriptr.

WebAssembly: Allow WebAssemblyFunctionInfo::getFrameRegister to return the
correct virtual register instead of FP32/SP32 after WebAssemblyReplacePhysRegs
has run. Make WebAssemblyExplicitLocals store the local it allocates for the
frame register. Use this local information to implement getDwarfFrameBase

The result is that the DW_AT_frame_base attribute is correctly encoded for each
subprogram, and each param and local variable has a correct DW_AT_location that
uses DW_OP_fbreg to refer to the frame base.

Differential Revision: https://reviews.llvm.org/D71681

show more ...

Update for an llvm-dwarfdump change in output

llvm-svn: 348955

[WebAssembly] Fix crash when relocation synbol is not live

When a symbol is GC'd it can still be references by relocations
in the debug sections, but such symbols are not assigned virtual
addresses.

[WebAssembly] Fix crash when relocation synbol is not live

When a symbol is GC'd it can still be references by relocations
in the debug sections, but such symbols are not assigned virtual
addresses.

This change adds a new global data symbol which gets GC'd but
should still appears in the output debug info, albeit with a 0
address.

Fixes 37555

Differential Revision: https://reviews.llvm.org/D47238

llvm-svn: 333047

show more ...

Fix lld wasm debug info test on Windows (path separator, sigh)

llvm-svn: 332668

[WebAssembly] Add support for debug (DWARF) sections

Specifically add support for custom sections that contain
relocations, and for the two new relocation types needed
by DWARF sections.

See: https

[WebAssembly] Add support for debug (DWARF) sections

Specifically add support for custom sections that contain
relocations, and for the two new relocation types needed
by DWARF sections.

See: https://reviews.llvm.org/D44184

Patch by Yury Delendik!

Differential Revision: https://reviews.llvm.org/D44184

llvm-svn: 331566

show more ...