net/qede: use common bit operations API

Remove its own bit operation APIs and use the common one,
this can reduce the code duplication largely.

Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Review

net/qede: use common bit operations API

Remove its own bit operation APIs and use the common one,
this can reduce the code duplication largely.

Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>

show more ...

net/qede/base: update FW to 8.40.25.0

This patch updates the FW to 8.40.25.0 and corresponding base driver
changes. It also updates the PMD version to 2.11.0.1. The FW updates
consists of enhancemen

net/qede/base: update FW to 8.40.25.0

This patch updates the FW to 8.40.25.0 and corresponding base driver
changes. It also updates the PMD version to 2.11.0.1. The FW updates
consists of enhancements and fixes as described below.

- VF RX queue start ramrod can get stuck due to completion error.
Return EQ completion with error, when fail to load VF data. Use VF
FID in RX queue start ramrod
- Fix big receive buffer initialization for 100G to address failure
leading to BRB hardware assertion
- GRE tunnel traffic doesn't run when non-L2 ethernet protocol is
enabled, fix FW to not forward tunneled SYN packets to LL2.
- Fix the FW assert that is caused during vport_update when
tx-switching is enabled
- Add initial FW support for VF Representors
- Add ecore_get_hsi_def_val() API to get default HSI values
- Move following from .c to .h files:
TSTORM_QZONE_START and MSTORM_QZONE_START
enum ilt_clients
renamed struct ecore_dma_mem to phys_mem_desc and moved
- Add ecore_cxt_set_cli() and ecore_cxt_set_blk() APIs to set client
config and block details
- Use SET_FIELD() macro where appropriate
- Address spell check and code alignment issues

Signed-off-by: Rasesh Mody <rmody@marvell.com>

show more ...

net/qede/base: add RL update params

Add 'rl_bc_stage_th','rl_timer_stage_th' and 'dcqcn_reset_alpha_on_idle'
to RL update param as well as logs.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede: move SPDX tags to source files

We were using LICENSE.qede_pmd to reference inclusion of SPDX licensing
tag from all the source file. Remove the LICENSE.qede_pmd file and
directly include S

net/qede: move SPDX tags to source files

We were using LICENSE.qede_pmd to reference inclusion of SPDX licensing
tag from all the source file. Remove the LICENSE.qede_pmd file and
directly include SPDX tags in source files.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

show more ...

net/qede: change copyright info to Cavium

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: fix to support OVLAN mode

This fix allows driver to program NIC configuration to support OVLAN
mode in multi-function scenario

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: add UFP support

Add support for UFP (Unified Fabric Port) multi-function mode.
It includes new APIs for reading UFP configuration, handling
UFP events, retriving UFP status and UFP ra

net/qede/base: add UFP support

Add support for UFP (Unified Fabric Port) multi-function mode.
It includes new APIs for reading UFP configuration, handling
UFP events, retriving UFP status and UFP ramrod update etc.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

show more ...

net/qede/base: update firmware to 8.30.12.0

Upgrade QEDE PMD FW to version 8.30.12.0.

The firmware upgrade change details are as:
- Add support for steering by IP and UDP destination port.
- Add

net/qede/base: update firmware to 8.30.12.0

Upgrade QEDE PMD FW to version 8.30.12.0.

The firmware upgrade change details are as:
- Add support for steering by IP and UDP destination port.
- Add source QP field for GSI offload.
- Add UFP support.
- Add support for outer IPv4 TX CSO with unknown tunnel type (in addition
to inner header CSO).
- Support flow ID in accelerated RFS flow.
- Allow Doorbell on empty SPQ and LL2 TX queue (for doorbell recovery).
- Enable PCI Relaxed Ordering for L2 RX data placement.
- Additional enhancements and bug fixes

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

show more ...

net/qede/base: use proper units for rate limiting

Change module parameter semantics to standard units (Rate limiting is used
for DCQCN feature).

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: add API to send STAG config update to FW

Send updated STAG configuration to the Firmware.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: use passed ptt handler

Use the ptt[PF translation table] handler that is passed rather than using
main ptt from the HW function.
In ecore_hw_get_resc()'s error flow, release the MFW g

net/qede/base: use passed ptt handler

Use the ptt[PF translation table] handler that is passed rather than using
main ptt from the HW function.
In ecore_hw_get_resc()'s error flow, release the MFW generic resource lock
only if needed.
Change the verbosity level of GRC timeout from DP_INFO() to DP_NOTICE().
Reduce verbosity of print in ecore_hw_bar_size().

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

show more ...

net/qede/base: upgrade the FW to 8.20.0.0

This patch adds changes to upgrade to 8.20.0.0 FW.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: support tunnelling for VF

Add new tunnelling support for VFs.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: revise tunnel APIs/structs

Revise tunnel APIs/structs.
- Unite tunnel start and update params in single struct
"ecore_tunnel_info"
- Remove A0 chip tunnelling support.
- Added p

net/qede/base: revise tunnel APIs/structs

Revise tunnel APIs/structs.
- Unite tunnel start and update params in single struct
"ecore_tunnel_info"
- Remove A0 chip tunnelling support.
- Added per tunnel info - removed bitmasks.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

show more ...

net/qede/base: change infrastructure for VF tunnelling

Infrastructure changes for VF tunnelling.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: optimize cache-line access

Optimize cache-line access in ecore_chain -
re-arrange fields so that fields that are needed for fastpath
[mostly produce/consume and their derivatives] are

net/qede/base: optimize cache-line access

Optimize cache-line access in ecore_chain -
re-arrange fields so that fields that are needed for fastpath
[mostly produce/consume and their derivatives] are in the first cache
line, and the rest are in the second.

This is true for both PBL and NEXT_PTR kind of chains.
Advancing a page in a SINGLE_PAGE chain would still require the 2nd
cacheline as well, but afaik only SPQ uses it and so it isn't
considered as 'fastpath'.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

show more ...

net/qede/base: add support for new firmware

Add support for 8.14.x.x firmware.

The new firmware adds support for external PHY BCM8485x; configures
fixed link speed with transceiver/cable not suppor

net/qede/base: add support for new firmware

Add support for 8.14.x.x firmware.

The new firmware adds support for external PHY BCM8485x; configures
fixed link speed with transceiver/cable not supporting negotiation;
supports engine swap; supports overriding PCIe preset equalization
value; checks pause too long for ports and reads die temperature
every second for shutdown threshold.
It includes change in FLR flow when there is a SW initiated FLR.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

show more ...

net/qede/base: update

This patch updates the base driver and incorporates necessary changes
required to bring in the new firmware 8.10.9.0.

In addition, it would allow driver to add new functionali

net/qede/base: update

This patch updates the base driver and incorporates necessary changes
required to bring in the new firmware 8.10.9.0.

In addition, it would allow driver to add new functionalities that might
be needed in future.

Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>

show more ...

net/qede/base: update formatting and comments

Change details:
- adds new comments
- modifies some of the existing comments
- abstract code into macros
- split long lines

Signed-off-by: Rasesh M

net/qede/base: update formatting and comments

Change details:
- adds new comments
- modifies some of the existing comments
- abstract code into macros
- split long lines

Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>

show more ...

net/qede/base: formatting changes

Fixes white spaces and tabs.

Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>

qede: add DCBX support

This patch adds LLDP and DCBX capabilities to the qede PMD.

Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Signed-o

qede: add DCBX support

This patch adds LLDP and DCBX capabilities to the qede PMD.

Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>

show more ...

qede: add base driver

The base driver is the backend module for the QLogic FastLinQ QL4xxxx
25G/40G CNA family of adapters as well as their virtual functions (VF)
in SR-IOV context.

The purpose of

qede: add base driver

The base driver is the backend module for the QLogic FastLinQ QL4xxxx
25G/40G CNA family of adapters as well as their virtual functions (VF)
in SR-IOV context.

The purpose of the base module is to:
- provide all the common code that will be shared between the various
drivers that would be used with said line of products. Flows such as
chip initialization and de-initialization fall under this category.
- abstract the protocol-specific HW & FW components, allowing the
protocol drivers to have clean APIs, which are detached in its
slowpath configuration from the actual Hardware Software Interface(HSI).

This patch adds a base module without any protocol-specific bits.
I.e., this adds a basic implementation that almost entirely falls under
the first category.

Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>

show more ...