net/qede/base: update FW to 8.40.25.0

This patch updates the FW to 8.40.25.0 and corresponding base driver
changes. It also updates the PMD version to 2.11.0.1. The FW updates
consists of enhancemen

net/qede/base: update FW to 8.40.25.0

This patch updates the FW to 8.40.25.0 and corresponding base driver
changes. It also updates the PMD version to 2.11.0.1. The FW updates
consists of enhancements and fixes as described below.

- VF RX queue start ramrod can get stuck due to completion error.
Return EQ completion with error, when fail to load VF data. Use VF
FID in RX queue start ramrod
- Fix big receive buffer initialization for 100G to address failure
leading to BRB hardware assertion
- GRE tunnel traffic doesn't run when non-L2 ethernet protocol is
enabled, fix FW to not forward tunneled SYN packets to LL2.
- Fix the FW assert that is caused during vport_update when
tx-switching is enabled
- Add initial FW support for VF Representors
- Add ecore_get_hsi_def_val() API to get default HSI values
- Move following from .c to .h files:
TSTORM_QZONE_START and MSTORM_QZONE_START
enum ilt_clients
renamed struct ecore_dma_mem to phys_mem_desc and moved
- Add ecore_cxt_set_cli() and ecore_cxt_set_blk() APIs to set client
config and block details
- Use SET_FIELD() macro where appropriate
- Address spell check and code alignment issues

Signed-off-by: Rasesh Mody <rmody@marvell.com>

show more ...

net/qede/base: update HSI

Update hardware software common base driver code in preparation to
update the firmware to version 8.40.25.0.

Signed-off-by: Rasesh Mody <rmody@marvell.com>

net/qede/base: move DMAE to HSI

Move DMA engine (DMAE) structures from base driver to HSI module.
Use DMAE_PARAMS_* in place of ECORE_DMAE_FLAG_*.
Enforce SET_FIELD() macro where appropriate.

Signe

net/qede/base: move DMAE to HSI

Move DMA engine (DMAE) structures from base driver to HSI module.
Use DMAE_PARAMS_* in place of ECORE_DMAE_FLAG_*.
Enforce SET_FIELD() macro where appropriate.

Signed-off-by: Rasesh Mody <rmody@marvell.com>

show more ...

net/qede/base: semantic changes

This patch consists of semantic/formatting changes.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: changes for 100G

Change details:

- Get engine affinity from the management FW and configure accordingly
- Add an LLH filter with the primary MAC address in QPAR/NPAR
- Move some o

net/qede/base: changes for 100G

Change details:

- Get engine affinity from the management FW and configure accordingly
- Add an LLH filter with the primary MAC address in QPAR/NPAR
- Move some of the LLH APIs around
- Add PPFID APIs
- Update all allocated ppfids with the same value for the
following PORT_PF registers:
NIG_REG_DSCP_TO_TC_MAP_ENABLE
- Add port_id, src_pfid and dst_pfid to DMA engine params

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

show more ...

net/qede: move SPDX tags to source files

We were using LICENSE.qede_pmd to reference inclusion of SPDX licensing
tag from all the source file. Remove the LICENSE.qede_pmd file and
directly include S

net/qede: move SPDX tags to source files

We were using LICENSE.qede_pmd to reference inclusion of SPDX licensing
tag from all the source file. Remove the LICENSE.qede_pmd file and
directly include SPDX tags in source files.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

show more ...

net/qede: change copyright info to Cavium

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: add DMAE sanity check

Add DMA engine sanity check during the engine initialization and before
PF initialization

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: catch an init command write failure

In case ecore_init_rt() fails for some reason, catch the failure and
fail the initialization.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: semantic changes

- Make ecore_dcbx_set_local_params(), ecore_cm_init_pf() as static
- Remove src_proto()
- remove reference to PROTOCOLID_TOE when determining whether a a protocol

net/qede/base: semantic changes

- Make ecore_dcbx_set_local_params(), ecore_cm_init_pf() as static
- Remove src_proto()
- remove reference to PROTOCOLID_TOE when determining whether a a protocol
requires SRC ILT memory
- Add auxiliary variables in various places
- All other changes are simple semantic corrections

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

show more ...

net/qede/base: remove unused parameters

This is an attempt to clean up many unused API parameters across the base
code. Most of the changes are related to removing unused p_hwfn or p_ptt
handlers. T

net/qede/base: remove unused parameters

This is an attempt to clean up many unused API parameters across the base
code. Most of the changes are related to removing unused p_hwfn or p_ptt
handlers. The warnings are generated using 'unused-parameter' cflags.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

show more ...

net/qede/base: use passed ptt handler

Use the ptt[PF translation table] handler that is passed rather than using
main ptt from the HW function.
In ecore_hw_get_resc()'s error flow, release the MFW g

net/qede/base: use passed ptt handler

Use the ptt[PF translation table] handler that is passed rather than using
main ptt from the HW function.
In ecore_hw_get_resc()'s error flow, release the MFW generic resource lock
only if needed.
Change the verbosity level of GRC timeout from DP_INFO() to DP_NOTICE().
Reduce verbosity of print in ecore_hw_bar_size().

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

show more ...

net/qede/base: add a sanity check

Add a sanity check that the offset being used to access the runtime array
is not greater/equal than/to RUNTIME_ARRAY_SIZE

Signed-off-by: Rasesh Mody <rasesh.mody@c

net/qede/base: add a sanity check

Add a sanity check that the offset being used to access the runtime array
is not greater/equal than/to RUNTIME_ARRAY_SIZE

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

show more ...

net/qede/base: refactor some code bits

Bits of code refactoring in ecore_hw_bar_size(), ecore_get_hw_info()
and ecore_init_cmd_*.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: semantic/formatting changes

This patch consists of semantic/formatting changes. It also includes
comment additions.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: add support for new firmware

Add support for 8.14.x.x firmware.

The new firmware adds support for external PHY BCM8485x; configures
fixed link speed with transceiver/cable not suppor

net/qede/base: add support for new firmware

Add support for 8.14.x.x firmware.

The new firmware adds support for external PHY BCM8485x; configures
fixed link speed with transceiver/cable not supporting negotiation;
supports engine swap; supports overriding PCIe preset equalization
value; checks pause too long for ports and reads die temperature
every second for shutdown threshold.
It includes change in FLR flow when there is a SW initiated FLR.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

show more ...

net/qede/base: update

This patch updates the base driver and incorporates necessary changes
required to bring in the new firmware 8.10.9.0.

In addition, it would allow driver to add new functionali

net/qede/base: update

This patch updates the base driver and incorporates necessary changes
required to bring in the new firmware 8.10.9.0.

In addition, it would allow driver to add new functionalities that might
be needed in future.

Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>

show more ...

net/qede/base: formatting changes

Fixes white spaces and tabs.

Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>

net/qede/base: add new files and rearrange the code

Added ecore_hsi_debug_tools.h, ecore_hsi_init_func.h,
ecore_hsi_init_tool.h files. Rearranged code from ecore_hsi_common.h and
ecore_hsi_tools.h t

net/qede/base: add new files and rearrange the code

Added ecore_hsi_debug_tools.h, ecore_hsi_init_func.h,
ecore_hsi_init_tool.h files. Rearranged code from ecore_hsi_common.h and
ecore_hsi_tools.h to the new files. Removed unused code.

Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>

show more ...

qede: add SRIOV support

This patch adds following SRIOV features to qede PMD:
- VF configuration
- VF intialization/de-initialization
- VF PF communications channel
- statistics capture and quer

qede: add SRIOV support

This patch adds following SRIOV features to qede PMD:
- VF configuration
- VF intialization/de-initialization
- VF PF communications channel
- statistics capture and query

Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>

show more ...

qede: add base driver

The base driver is the backend module for the QLogic FastLinQ QL4xxxx
25G/40G CNA family of adapters as well as their virtual functions (VF)
in SR-IOV context.

The purpose of

qede: add base driver

The base driver is the backend module for the QLogic FastLinQ QL4xxxx
25G/40G CNA family of adapters as well as their virtual functions (VF)
in SR-IOV context.

The purpose of the base module is to:
- provide all the common code that will be shared between the various
drivers that would be used with said line of products. Flows such as
chip initialization and de-initialization fall under this category.
- abstract the protocol-specific HW & FW components, allowing the
protocol drivers to have clean APIs, which are detached in its
slowpath configuration from the actual Hardware Software Interface(HSI).

This patch adds a base module without any protocol-specific bits.
I.e., this adds a basic implementation that almost entirely falls under
the first category.

Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>

show more ...