drivers: remove redundant newline from logs

Fix places where two newline characters may be logged.

Cc: stable@dpdk.org

Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Chengwen

drivers: remove redundant newline from logs

Fix places where two newline characters may be logged.

Cc: stable@dpdk.org

Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Chengwen Feng <fengchengwen@huawei.com>

show more ...

eal: remove unneeded includes from a public header

Do not include <ctype.h>, <errno.h>, and <stdlib.h> from <rte_common.h>,
because they are not used by this file.
Include the needed headers directl

eal: remove unneeded includes from a public header

Do not include <ctype.h>, <errno.h>, and <stdlib.h> from <rte_common.h>,
because they are not used by this file.
Include the needed headers directly from the files that need them.

Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>

show more ...

drivers: remove direct access to interrupt handle

Removing direct access to interrupt handle structure fields,
rather use respective get set APIs for the same.
Making changes to all the drivers acce

drivers: remove direct access to interrupt handle

Removing direct access to interrupt handle structure fields,
rather use respective get set APIs for the same.
Making changes to all the drivers access the interrupt handle fields.

Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>

show more ...

ethdev: add namespace

Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to

ethdev: add namespace

Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.

All internal components switched to using new names.

Syntax fixed on lines that this patch touches.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>

show more ...

net/failsafe: fix fd leak

Zero is a valid fd. The fd won't be closed thus leading fd leak,
when it is zero.

Also the service proxy is initialized at 0. This is assuming that all of
its fields are i

net/failsafe: fix fd leak

Zero is a valid fd. The fd won't be closed thus leading fd leak,
when it is zero.

Also the service proxy is initialized at 0. This is assuming that all of
its fields are invalid at 0. The issue is that a file descriptor at 0 is
a valid one.

The value -1 is used as sentinel during cleanup. Initialize the RX proxy
file descriptor to -1.

Fixes: f234e5bd996d ("net/failsafe: register slaves Rx interrupts")
Fixes: 9e0360aebf23 ("net/failsafe: register as Rx interrupt mode")
Cc: stable@dpdk.org

Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: Gaetan Rivet <grive@u256.net>
Tested-by: Ali Alnubani <alialnu@mellanox.com>

show more ...

build: remove redundant config include

The header file rte_config.h is always included by make or meson.
If required in an exported API header file, it must be included
in the public header file for

build: remove redundant config include

The header file rte_config.h is always included by make or meson.
If required in an exported API header file, it must be included
in the public header file for external applications.
In the internal files, explicit include of rte_config.h is useless,
and can be removed.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>

show more ...

net/failsafe: change back-reference from sub-device

In multiprocess context, the sub-device structure is shared
between processes. The reference to the failsafe device was
a per process pointer. It'

net/failsafe: change back-reference from sub-device

In multiprocess context, the sub-device structure is shared
between processes. The reference to the failsafe device was
a per process pointer. It's changed to port id which is the
same for all processes.

Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>

show more ...

net/failsafe: replace local device with shared data

In multiprocess context, the private structure is shared between
processes. The back reference from private to generic data was using
a pointer to

net/failsafe: replace local device with shared data

In multiprocess context, the private structure is shared between
processes. The back reference from private to generic data was using
a pointer to a per process eth_dev. It's now changed to a reference of
the shared data.

Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>

show more ...

net/failsafe: support runtime Rx queues setup

Signed-off-by: Ian Dolzhansky <ian.dolzhansky@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>

align SPDX Mellanox copyrights

Aligning Mellanox SPDX copyrights to a single format.
In addition replace to SPDX licence files which were missed.

Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>

align SPDX Mellanox copyrights

Aligning Mellanox SPDX copyrights to a single format.
In addition replace to SPDX licence files which were missed.

Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

show more ...

net/failsafe: fix Rx interrupt reinstallation

Fail-safe dev_start() operation can be called by both the application
and the hot-plug alarm mechanism.

The installation of Rx interrupt are triggered

net/failsafe: fix Rx interrupt reinstallation

Fail-safe dev_start() operation can be called by both the application
and the hot-plug alarm mechanism.

The installation of Rx interrupt are triggered from dev_start() in any
time it is called while actually the Rx interrupt should be installed
only by the application calls.

So, each plug-in event causes reinstallation which causes memory leak
and spoils the fail-safe Rx interrupt mechanism.

Trigger the Rx interrupt installation only when it does not exist.

Fixes: 9e0360aebf23 ("net/failsafe: register as Rx interrupt mode")

Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>

show more ...

net/failsafe: add Rx interrupts

This patch is the last patch in the series of patches aimed
to add support for registering and waiting for Rx interrupts
in failsafe PMD. This allows applications to

net/failsafe: add Rx interrupts

This patch is the last patch in the series of patches aimed
to add support for registering and waiting for Rx interrupts
in failsafe PMD. This allows applications to wait for Rx events
from the PMD using the DPDK rte_epoll subsystem.
The failsafe PMD presents to the application a facade of a single
device to be handled by the application while internally it manages
several devices on behalf of the application including packets
transmission and reception.
The Proposed failsafe Rx interrupt scheme follows this approach.
The failsafe PMD will present the application with a single set of
Rx interrupt vectors representing the failsafe Rx queues, while
internally it will serve as an interrupt proxy for its subdevices.
will allow applications to wait for Rx traffic from the failsafe
PMD by registering and waiting for Rx events from its Rx queues.
In order to support this the following is suggested:
* Every Rx queue in the failsafe (virtual) device will be assigned
* a Linux event file descriptor (efd) and an enable_interrupts flag.
* The failsafe PMD will fill in its rte_intr_handle structure with
the Rx efds assigned previously and register them with the EAL.
* The failsafe driver will create a private epoll fd (epfd) and
* will allocate enough space to handle all the Rx events from all its
subdevices.
* Acting as an application,
for each Rx queue in each active subdevice the failsafe will:
o Register the Rx queue with the EAL.
o Pass the EAL the failsafe private epoll fd as the epfd to
register the Rx queue event on.
o Pass the EAL, as a parameter, the pointer to the failsafe Rx
queue that handles this Rx queue.
o Using the DPDK service callbacks, the failsafe PMD will launch
an Rx proxy service that will Wait on the epoll fd for Rx
events from the sub-devices.
o For each Rx event received the proxy service will
- Retrieve the pointer to failsafe Rx queue that handles
this subdevice Rx queue from the user info returned by the
EAL.
- Trigger a failsafe Rx event on that queue by writing to
the event fd unless interrupts are disabled for that queue.
* The failsafe pmd will also implement the rx_queue_intr_enable
* and rx_queue_intr_disable routines that will enable and disable Rx
interrupts respectively on both on the failsafe and its subdevices.

Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>

show more ...

net/failsafe: register slaves Rx interrupts

This commit adds the following functionality to failsafe PMD:
* Register and unregister slaves Rx interrupts.
* Enable and Disable slaves Rx interrupts.
T

net/failsafe: register slaves Rx interrupts

This commit adds the following functionality to failsafe PMD:
* Register and unregister slaves Rx interrupts.
* Enable and Disable slaves Rx interrupts.
The interrupts events generated by the slaves are not handled in this
commit.

Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>

show more ...

net/failsafe: register as Rx interrupt mode

This patch adds registering the Rx queues of the failsafe PMD with EAL
Rx interrupts subsystem.
Each failsafe RX queue is assigned with a unique eventfd a

net/failsafe: register as Rx interrupt mode

This patch adds registering the Rx queues of the failsafe PMD with EAL
Rx interrupts subsystem.
Each failsafe RX queue is assigned with a unique eventfd and an enable
interrupts flag.
The PMD creates an interrupt vector containing the above eventfds and
Registers it with EAL. The PMD also implements the Rx interrupts enable
and disable interface routines.
This patch does not implement the generation of Rx interrupts, so an
application can now wait for failsafe Rx interrupts but it will not
receive one.

Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>

show more ...