app/eventdev: clean up worker state before exit

Event ports are configured to implicitly release the scheduler contexts
currently held in the next call to rte_event_dequeue_burst().
A worker core mi

app/eventdev: clean up worker state before exit

Event ports are configured to implicitly release the scheduler contexts
currently held in the next call to rte_event_dequeue_burst().
A worker core might still hold a scheduling context during exit, as the
next call to rte_event_dequeue_burst() is never made.
This might lead to deadlock based on the worker exit timing and when
there are very less number of flows.

Add clean up function to release any scheduling contexts held by the
worker by using RTE_EVENT_OP_RELEASE.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

show more ...

app/eventdev: simplify signal handling and teardown

Remove rte_*_dev calls from signal handler callback as signal handlers
are supposed to be light weight.

Split ethdev teardown into Rx and Tx sect

app/eventdev: simplify signal handling and teardown

Remove rte_*_dev calls from signal handler callback as signal handlers
are supposed to be light weight.

Split ethdev teardown into Rx and Tx sections, wait for
workers to finish processing after disabling Rx to allow workers
to complete processing currently held packets.

Verified SW event device on ARM64 using the following command:

./build/app/dpdk-test-eventdev -l 7-23 -s 0xf00 --vdev=event_sw0
-a 0002:02:00.0 -- --prod_type_ethdev --nb_pkts=0 --verbose 2
--test=pipeline_queue --stlist=o --wlcores 16-23

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

show more ...

app/eventdev: add vector mode in pipeline test

Add event vector support in pipeline tests. By default this mode
is disabled, it can be enabled by using the option --enable_vector.
example:
dpdk-tes

app/eventdev: add vector mode in pipeline test

Add event vector support in pipeline tests. By default this mode
is disabled, it can be enabled by using the option --enable_vector.
example:
dpdk-test-eventdev -l 7-23 -s 0xff00 -- --prod_type_ethdev
--nb_pkts=0 --verbose 2 --test=pipeline_atq --stlist=a
--wlcores=20-23 --enable_vector

Additional options to configure vector size and vector timeout are
also implemented and can be used by specifying --vector_size and
--vector_tmo_ns

This patch also adds a new option to set the number of Rx queues
configured per event eth rx adapter.
example:
dpdk-test-eventdev -l 7-23 -s 0xff00 -- --prod_type_ethdev
--nb_pkts=0 --verbose 2 --test=pipeline_atq --stlist=a
--wlcores=20-23 --nb_eth_queues 4

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

show more ...

app/eventdev: fix capability check in pipeline ATQ test

Add all type queue capability check before configuring event device
for pipeline atq test.

Fixes: 6bf570a9911 ("app/eventdev: add pipeline at

app/eventdev: fix capability check in pipeline ATQ test

Add all type queue capability check before configuring event device
for pipeline atq test.

Fixes: 6bf570a9911 ("app/eventdev: add pipeline atq test")
Cc: stable@dpdk.org

Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>

show more ...

app/eventdev: add option for global dequeue timeout

Add option to provide a global dequeue timeout that is used to create
the eventdev.
The dequeue timeout provided will be common across all the wor

app/eventdev: add option for global dequeue timeout

Add option to provide a global dequeue timeout that is used to create
the eventdev.
The dequeue timeout provided will be common across all the worker
ports. If the eventdev hardware supports power management through
dequeue timeout then this option can be used for verifying power
demands at various packet rates.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>

show more ...

app/eventdev: start event producers after eventdev

Start event producers after eventdev i.e. consumer is started as in some
architectures it might lead to undefined behaviour or events being
dropped

app/eventdev: start event producers after eventdev

Start event producers after eventdev i.e. consumer is started as in some
architectures it might lead to undefined behaviour or events being
dropped.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>

show more ...

fix dpdk.org URLs

The DPDK website has a new URL scheme since June 2018.

Cc: stable@dpdk.org

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>

app/eventdev: support Tx adapter

Convert existing Tx service based pipeline to Tx adapter based APIs and
simplify worker functions.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>

app/eventdev: support Tx adapter

Convert existing Tx service based pipeline to Tx adapter based APIs and
simplify worker functions.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

show more ...

app/eventdev: fix minor typos

Fix minor typos.

Fixes: 314bcf58ca8f ("app/eventdev: add pipeline queue worker functions")
Cc: stable@dpdk.org

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetw

app/eventdev: fix minor typos

Fix minor typos.

Fixes: 314bcf58ca8f ("app/eventdev: add pipeline queue worker functions")
Cc: stable@dpdk.org

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

show more ...

ethdev: deprecate port count function

Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the applica

ethdev: deprecate port count function

Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application

Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.

In order to fix this common mistake in all external applications,
the function rte_eth_dev_count is deprecated, while introducing
the new functions rte_eth_dev_count_avail and rte_eth_dev_count_total.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>

show more ...

app/eventdev: fix port dequeue depth configuration

The port dequeue depth value has to be compared against the maximum
allowed dequeue depth reported by the event drivers.

Fixes: 3617aae53f92 ("app

app/eventdev: fix port dequeue depth configuration

The port dequeue depth value has to be compared against the maximum
allowed dequeue depth reported by the event drivers.

Fixes: 3617aae53f92 ("app/eventdev: add event Rx adapter setup")

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

show more ...

app/eventdev: add pipeline atq worker functions

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>

app/eventdev: add pipeline atq test

This is a pipeline test case that aims at testing the following with
``all types queue`` eventdev scheme.
1. Measure the end-to-end performance of an event dev wi

app/eventdev: add pipeline atq test

This is a pipeline test case that aims at testing the following with
``all types queue`` eventdev scheme.
1. Measure the end-to-end performance of an event dev with a ethernet dev.
2. Maintain packet ordering from Rx to Tx.

The atq queue test functions as same as ``pipeline_queue`` test.
The difference is, It uses, ``all type queue scheme`` instead of separate
queues for each stage and thus reduces the number of queues required to
realize the use case.

Note: The --prod_type_ethdev is mandatory for running the application.

Example command to run pipeline atq test:
sudo build/app/dpdk-test-eventdev -c 0xf -s 0x8 --vdev=event_sw0 -- \
--test=pipeline_atq --wlcore=1 --prod_type_ethdev --stlist=ao

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>

show more ...