/freebsd-src/sys/contrib/dev/iwlwifi/mvm/ |
H A D | rfi.c | 11 * DDR needs frequency in units of 16.666MHz, so provide FW with the 15 /* frequency 2667MHz */ 20 /* frequency 2933MHz */ 27 /* frequency 3200MHz */ 32 /* frequency 3733MHz */ 37 /* frequency 4000MHz */ 42 /* frequency 4267MHz */ 47 /* frequency 4400MHz */ 52 /* frequency 5200MHz */ 57 /* frequency 5600MHz */ [all...] |
/freebsd-src/sys/contrib/device-tree/src/arm64/freescale/ |
H A D | imx8mm-data-modul-edm-sbc.dts | 281 /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */ 416 /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */ 458 /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */ 469 /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */ 819 pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { 833 pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { 864 pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { 881 pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
|
/freebsd-src/sys/net80211/ |
H A D | ieee80211_regdomain.h | 90 CTRY_COTE_DIVOIRE = 384, 258 SKU_SR9 = 0x0298, /* Ubiquiti SR9 (900MHz/GSM) */ 259 SKU_XR9 = 0x0299, /* Ubiquiti XR9 (900MHz/GSM) */ 260 SKU_GZ901 = 0x029a, /* Zcomax GZ-901 (900MHz/GSM) */ 261 SKU_XC900M = 0x029b, /* Xagyl XC900M (900MHz/GSM) */ 266 * offset channel spacing (905MHz- 267 * 925MHz) versus the XR9 (907MHz- 268 * 922MHz), giving an extra channel.
|
/freebsd-src/sys/contrib/device-tree/Bindings/mmc/ |
H A D | mmc-controller.yaml | 93 - for eMMC, the maximum supported frequency is 200MHz, 95 frequency of 208MHz, 97 384MHz.
|
/freebsd-src/sys/contrib/device-tree/src/arm64/qcom/ |
H A D | sdx75.dtsi | 55 capacity-dmips-mhz = <1024>; 81 capacity-dmips-mhz = <1024>; 102 capacity-dmips-mhz = <1024>; 123 capacity-dmips-mhz = <1024>; 1506 rpmhpd_opp_turbo: opp-384 {
|
H A D | sdm630.dtsi | 62 capacity-dmips-mhz = <1126>; 82 capacity-dmips-mhz = <1126>; 97 capacity-dmips-mhz = <1126>; 112 capacity-dmips-mhz = <1126>; 127 capacity-dmips-mhz = <1024>; 147 capacity-dmips-mhz = <1024>; 162 capacity-dmips-mhz = <1024>; 177 capacity-dmips-mhz = <1024>; 266 exit-latency-us = <384>;
|
H A D | sm8650.dtsi | 83 capacity-dmips-mhz = <1024>; 116 capacity-dmips-mhz = <1024>; 136 capacity-dmips-mhz = <1792>; 163 capacity-dmips-mhz = <1792>; 183 capacity-dmips-mhz = <1792>; 210 capacity-dmips-mhz = <1792>; 237 capacity-dmips-mhz = <1792>; 264 capacity-dmips-mhz = <1894>; 5170 rpmhpd_opp_turbo: opp-384 {
|
H A D | sm8550.dtsi | 77 capacity-dmips-mhz = <1024>; 103 capacity-dmips-mhz = <1024>; 124 capacity-dmips-mhz = <1024>; 145 capacity-dmips-mhz = <1792>; 166 capacity-dmips-mhz = <1792>; 187 capacity-dmips-mhz = <1792>; 208 capacity-dmips-mhz = <1792>; 229 capacity-dmips-mhz = <1894>; 4441 rpmhpd_opp_turbo: opp-384 {
|
/freebsd-src/contrib/wpa/wpa_supplicant/ |
H A D | config_ssid.h | 516 * frequency - Channel frequency in megahertz (MHz) for IBSS 627 * megahertz (MHz) to include in scan requests when searching for this 660 * megahertz (MHz) to allow for selecting the BSS. If set, scan results 746 * ht40_intolerant - Indicate 40 MHz intolerant for this network 1136 * Groups 19 (NIST P-256), 20 (NIST P-384), and 21 (NIST P-521) are
|
H A D | wpa_supplicant.conf | 453 # 20 (NIST P-384) and 21 (NIST P-521) are also enabled. If this parameter is 945 # frequency: Channel frequency in megahertz (MHz) for IBSS, e.g., 964 # Space-separated list of frequencies in MHz to scan when searching for this 970 # Space-separated list of frequencies in MHz to allow for selecting the BSS. If 1584 # Groups 19 (NIST P-256), 20 (NIST P-384), and 21 (NIST P-521) are 1650 # ht40_intolerant: Whether 40 MHz intolerant should be indicated. 1651 # 0 = 40 MHz tolerant (default) 1652 # 1 = 40 MHz intolerant
|
/freebsd-src/contrib/wpa/hostapd/ |
H A D | hostapd.conf | 627 # Supported channel width set: [HT40-] = both 20 MHz and 40 MHz with secondary 628 # channel below the primary channel; [HT40+] = both 20 MHz and 40 MHz 630 # (20 MHz only if neither is set) 639 # Please note that 40 MHz channels may switch their primary and secondary 640 # channels if needed or creation of 40 MHz channel maybe rejected based 642 # is setting up the 40 MHz channel. 644 # Short GI for 20 MHz: [SHORT-GI-20] (disabled if not set) 645 # Short GI for 40 MHz [all...] |
/freebsd-src/sys/dev/sound/pci/ |
H A D | envy24.h | 65 /* 00: 22.5792MHz(44.1kHz*512) */ 66 /* 01: 16.9344MHz(44.1kHz*384) */
|
/freebsd-src/sys/contrib/device-tree/src/arm64/rockchip/ |
H A D | rk3399-gru.dtsi | 159 regulator-settling-time-up-us = <384>; 523 * Signal integrity isn't great at 200 MHz and 150 MHz (DDR) gives the
|
/freebsd-src/sys/contrib/device-tree/include/dt-bindings/clock/ |
H A D | tegra234-clock.h | 200 /** Fixed 100MHz PLL for PCIe, SATA and superspeed USB */ 206 /** Fixed frequency 960MHz PLL for USB and EAVB */ 539 /** @brief Fixed 48MHz clock divided down from utmipll */ 541 /** @brief Fixed 480MHz clock divided down from utmipll */ 712 #define TEGRA234_CLK_MGBE1_TX_PCS 384U
|
/freebsd-src/sys/contrib/dev/athk/ath11k/ |
H A D | wmi.h | 2123 WMI_MAX_EXT2_SERVICE = 384 2194 * WMI_NSS_RATIO_1BY2_NSS -Max nss of 160MHz is equals to half of the max nss 2195 * of 80MHz 2196 * WMI_NSS_RATIO_3BY4_NSS - Max nss of 160MHz is equals to 3/4 of the max nss 2197 * of 80MHz 2198 * WMI_NSS_RATIO_1_NSS - Max nss of 160MHz is equals to the max nss of 80MHz 2199 * WMI_NSS_RATIO_2_NSS - Max nss of 160MHz is equals to two times the max 2200 * nss of 80MHz 2699 u32 mhz; member 2895 /* Freq units in MHz */ [all …]
|
/freebsd-src/sys/arm/freescale/imx/ |
H A D | imx_i2c.c | 124 { 256, 0x33 }, { 288, 0x10 }, { 320, 0x34 }, { 384, 0x35 }, 634 * pause() while waiting for transfer-complete. With a 66MHz IPG clock in i2c_reset()
|
/freebsd-src/sys/contrib/dev/athk/ath12k/ |
H A D | hal_desc.h | 56 * Sw_buffer_cookie[19:17] = 3'b000: 20 MHz TX only 57 * Sw_buffer_cookie[19:17] = 3'b001: 40 MHz TX only 58 * Sw_buffer_cookie[19:17] = 3'b010: 80 MHz TX only 59 * Sw_buffer_cookie[19:17] = 3'b011: 160 MHz TX only 60 * Sw_buffer_cookie[19:17] = 3'b101: 240 MHz TX only 61 * Sw_buffer_cookie[19:17] = 3'b100: 320 MHz TX only 457 HAL_SNOOP_MSDU_USR_DBG_INFO = 384 /* 0x180 */,
|
/freebsd-src/sys/contrib/device-tree/src/arm64/renesas/ |
H A D | r8a77961.dtsi | 153 capacity-dmips-mhz = <1024>; 167 capacity-dmips-mhz = <1024>; 183 capacity-dmips-mhz = <535>; 196 capacity-dmips-mhz = <535>; 209 capacity-dmips-mhz = <535>; 222 capacity-dmips-mhz = <535>; 2165 interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
|
H A D | r8a77951.dtsi | 153 capacity-dmips-mhz = <1024>; 167 capacity-dmips-mhz = <1024>; 181 capacity-dmips-mhz = <1024>; 195 capacity-dmips-mhz = <1024>; 211 capacity-dmips-mhz = <535>; 224 capacity-dmips-mhz = <535>; 237 capacity-dmips-mhz = <535>; 250 capacity-dmips-mhz = <535>; 2414 interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
|
H A D | r8a77960.dtsi | 153 capacity-dmips-mhz = <1024>; 167 capacity-dmips-mhz = <1024>; 183 capacity-dmips-mhz = <535>; 196 capacity-dmips-mhz = <535>; 209 capacity-dmips-mhz = <535>; 222 capacity-dmips-mhz = <535>; 2285 interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
|
/freebsd-src/contrib/file/magic/Magdir/ |
H A D | audio | 513 # 24.576 MHz (video/fs=48kHz), 22.5792 (audio/fs=44.1kHz) and 530 >>17 belong&0xfffff0 0x5dc000 \b, 384 kHz 625 384 string LockStream LockStream Embedded file (mostly MP3 on old Nokia phones)
|
/freebsd-src/sys/dev/qlnx/qlnxe/ |
H A D | ecore_init_fw_funcs.c | 47 { 400, 336, 352, 304, 304, 384, 416, 352}, /* region 3 offsets */ 96 /* Period in 25MHz cycles */ 946 /* Period in 25MHz cycles */
|
/freebsd-src/sys/dev/sfxge/common/ |
H A D | efx_regs_mcdi.h | 1361 * Hz) is rounded to the nearest MHz (e.g. 666000000 for 666666666). 12580 /* System frequency, MHz */ 12583 /* DPCPU frequency, MHz */ 12598 /* Requested frequency in MHz for system clock domain */ 12603 /* Requested frequency in MHz for inter-core clock domain */ 12608 /* Requested frequency in MHz for DPCPU clock domain */ 12613 /* Requested frequency in MHz for PCS clock domain */ 12618 /* Requested frequency in MHz for MC clock domain */ 12623 /* Requested frequency in MHz for rmon clock domain */ 12628 /* Requested frequency in MHz for vswitch clock domain */ [all …]
|
/freebsd-src/sys/dev/msk/ |
H A D | if_mskreg.h | 314 #define PCI_OS_PCI66M BIT_27 /* PCI 66 MHz Bus */ 323 #define PCI_OS_SPD_X66 1 /* PCI-X 66MHz Bus */ 324 #define PCI_OS_SPD_X100 2 /* PCI-X 100MHz Bus */ 325 #define PCI_OS_SPD_X133 3 /* PCI-X 133MHz Bus */ 1489 /* 01X=0; 110=2.5; 111=25 (MHz) */ 2092 #define GPC_DIS_125 BIT_17 /* Disable 125 MHz clock */ 2328 #define MSK_TX_RING_CNT 384
|
/freebsd-src/sys/dev/arcmsr/ |
H A D | arcmsr.h | 48 #define ARCMSR_MAX_FREESRB_NUM 384 1098 ** 010: <= 0x0180 (384) 1669 … 1 66 MHz Capable Indication: Returns a 1b when read indicating that bridge … 1851 … 1b 66 MHz Capable (C66): Indicates the secondary interface of the … 2193 ** 05:04 11 (66 MHz) Preserved. 2194 ** 01 (100 MHz) 2195 ** 00 (133 MHz) 2196 ** 03:00 Fh (100 MHz & 66 MHz) 2197 ** 7h (133 MHz) 2202 ** �E Designs with 100 MHz (or lower) Secondary PCI c… [all …]
|