test/unit: use spdk_ut_run_tests()

Replaced direct calls to the CUnit's functions to run the tests with
spdk_ut_run_tests(). That way, each test will have the ability to run
a specific test case.

test/unit: use spdk_ut_run_tests()

Replaced direct calls to the CUnit's functions to run the tests with
spdk_ut_run_tests(). That way, each test will have the ability to run
a specific test case.

The blob.c unit test wasn't changed, because it runs all tests multiple
times with different parameter combinations, so it cannot be easily
converted. In the future, each such combination could be split into a
separate test suite, which would make it compatible with
spdk_ut_run_tests().

Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I4463f808f89844e9bf32b5b31eda197c5d729d1d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/19288
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>

show more ...

test/unit: move spdk_cunit.h to include/spdk_internal

It'll make it easier to include this file outside of unit tests.

Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I171ddb864

test/unit: move spdk_cunit.h to include/spdk_internal

It'll make it easier to include this file outside of unit tests.

Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I171ddb8649f67b5786f08647560e2907603d0574
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/19284
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>

show more ...

update Intel copyright notices

per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.

git log --follow -C90% --format=%ad --date defa

update Intel copyright notices

per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.

git log --follow -C90% --format=%ad --date default <file> | tail -1

and then pull just the 4 digit year from the result.

Intel copyrights were not added to files where Intel either had
no contribution ot the contribution lacked substance (ie license
header updates, formatting changes, etc). Contribution date used
"--follow -C95%" to get the most accurate date.

Note that several files in this patch didn't end the license/(c)
block with a blank comment line so these were added as the vast
majority of files do have this last blank line. Simply there for
consistency.

Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id5b7ce4f658fe87132f14139ead58d6e285c04d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot

show more ...

print better errors when creating mempools from secondary process

Multiprocess is only supported by a few libraries (e.g. NVMe driver).
Other libraries that don't support it will often fail on mempo

print better errors when creating mempools from secondary process

Multiprocess is only supported by a few libraries (e.g. NVMe driver).
Other libraries that don't support it will often fail on mempool
initialization when running as a secondary process, as the mempools are
already created by the primary process. But the error messages are
vague and don't indicate why this happened. So, this patch adds a check
to see if a mempool exists after spdk_mempool_create() fails and prints
an error message informing users that multiprocess is unsupported.

Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I6f915a94266e64dda380e3b269424cc579372a10
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/14234
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>

show more ...

check_format: For C files only, fix return type breaks

In SPDK, declarations have the return type on the same line. Definitions
have the return type on a separate line. Astyle has an option for
enfo

check_format: For C files only, fix return type breaks

In SPDK, declarations have the return type on the same line. Definitions
have the return type on a separate line. Astyle has an option for
enforcing this. Unfortunately, it seems to have two bugs:

1) It doesn't work correctly at all on C++ files.
2) It often fails on functions that return enums, or long type names

Deal with 1) by adjusting the check_format.sh script to only tell astyle
to fix return type line breaks for C files and not C++. Deal with 2) by
adding a few typedefs to work around the problem.

Change-Id: Idf28281466cab8411ce252d5f02ab384166790c6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>

show more ...

Replace most BSD 3-clause license text with SPDX identifier.

Many open source projects have moved to using SPDX identifiers
to specify license information, reducing the amount of
boilerplate code in

Replace most BSD 3-clause license text with SPDX identifier.

Many open source projects have moved to using SPDX identifiers
to specify license information, reducing the amount of
boilerplate code in every source file. This patch replaces
the bulk of SPDK .c, .cpp and Makefiles with the BSD-3-Clause
identifier.

Almost all of these files share the exact same license text,
and this patch only modifies the files that contain the
most common license text. There can be slight variations
because the third clause contains company names - most say
"Intel Corporation", but there are instances for Nvidia,
Samsung, Eideticom and even "the copyright holder".

Used a bash script to automate replacement of the license text
with SPDX identifier which is checked into scripts/spdx.sh.

Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa88ab5e92ea471691dc298cfe41ebfb5d169780
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12904
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <qun.wan@intel.com>

show more ...

blob: Add readv/writev ext ops to spdk_bs_dev

Introduce spdk_blob_ext_io_opts structure which
is used in the new *_ext functions.
Zeroes dev is updated with implementation of
readv_ext which uses m

blob: Add readv/writev ext ops to spdk_bs_dev

Introduce spdk_blob_ext_io_opts structure which
is used in the new *_ext functions.
Zeroes dev is updated with implementation of
readv_ext which uses memory domains memzero
or regular memset().

Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Id94542196eff999827bf00591fd43804256fccb4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11369
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>

show more ...

thread: Make the definition of struct spdk_io_channel private

Move the definition of structure spdk_io_channel into
lib/thread/thread_internal.h, so we don't have to update SO_VER for
other librarie

thread: Make the definition of struct spdk_io_channel private

Move the definition of structure spdk_io_channel into
lib/thread/thread_internal.h, so we don't have to update SO_VER for
other libraries in future when we need to change the internal details on
the structure.

Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: I3d2ca7a8737972e0b33ce92e464da42c48f89dec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8189
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>

show more ...

mk/unit: link with trace library

Linking each unit test with spdk_trace allows for getting rid of lots of
stub definitions for the trace functions. The behavior stays the same,
as the trace calls r

mk/unit: link with trace library

Linking each unit test with spdk_trace allows for getting rid of lots of
stub definitions for the trace functions. The behavior stays the same,
as the trace calls result in no-op anyway because none of the unit test
apps enable tracing.

Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I904dac92205aadd644100af2c38989bb7979e47c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7231
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>

show more ...

remove unneeded spdk_internal/thread.h includes

Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I488d7c9441302847b170cd3b2a835ecad74cd031
Reviewed-on: https://review.spdk.io/gerrit/c

remove unneeded spdk_internal/thread.h includes

Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I488d7c9441302847b170cd3b2a835ecad74cd031
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4718
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>

show more ...

lib/blobfs: remove legacy config support

This patch removes legacy config support in blobfs library.
Mostly reverting patch:
(97f3104) blobfs: Add conf parse for blobfs.

CacheBufferShift option in

lib/blobfs: remove legacy config support

This patch removes legacy config support in blobfs library.
Mostly reverting patch:
(97f3104) blobfs: Add conf parse for blobfs.

CacheBufferShift option in legacy config is not tested in CI,
and never received corresponding RPC.
If required the RPC can always be added later on.

Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I54e39f069047a243b2186ae5ea225ed452180488
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4668
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>

show more ...

blobfs: refactor cache_free_buffers()

cache_free_buffers() was only used in the file deletion and unload, and
the file is also freed after that, so here we combine the cache free and
file free toget

blobfs: refactor cache_free_buffers()

cache_free_buffers() was only used in the file deletion and unload, and
the file is also freed after that, so here we combine the cache free and
file free together and do the cache free in the cache thread.

Change-Id: I57e9a27c9a6467bcf6c85cd277db3b57e06c98e5
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1795
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>

show more ...

blobfs: add the file with new cache buffer to cache list in cache thread

Also poll thread in the UT to cover the thread context switch.

Change-Id: I3dc765b66aa707c36eb3913b3e0d2c1c3986e282
Signed-o

blobfs: add the file with new cache buffer to cache list in cache thread

Also poll thread in the UT to cover the thread context switch.

Change-Id: I3dc765b66aa707c36eb3913b3e0d2c1c3986e282
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1793
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>

show more ...

lib/thread: Wait until thread_is_exited() is true by thread_poll() after thread_exit()

Following patches will require thread termination so that thread_exit()
will move thread to exiting, thread_pol

lib/thread: Wait until thread_is_exited() is true by thread_poll() after thread_exit()

Following patches will require thread termination so that thread_exit()
will move thread to exiting, thread_poll() will move thread from
exiting to exited, thread_is_exited() will detect the threadis exited,
and then call thread_destroy().

So change all places as a preparation.

Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b2e8aee5ed7cd160a88b4c9aaed7d90bd9dac07
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1640
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>

show more ...

ut: make use of CUnit macro to reduce duplications

CUnit provides a helper macro CU_ADD_TEST() that
simplifies usage of CU_add_test() function.
Test name no longer needs to be provided,
as it will b

ut: make use of CUnit macro to reduce duplications

CUnit provides a helper macro CU_ADD_TEST() that
simplifies usage of CU_add_test() function.
Test name no longer needs to be provided,
as it will be inherited from function name.

This is a follow up to
https://review.spdk.io/gerrit/c/spdk/spdk/+/931

Change-Id: I8078f02e08b14f12328ae022d7090ba13fbd64e4
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1239
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>

show more ...

ut: simplify error handling at initialization

This patch changes the way that unittests initialize.
The new way is shorter and simpler.
It assumes that error during initialization is a fatal error,

ut: simplify error handling at initialization

This patch changes the way that unittests initialize.
The new way is shorter and simpler.
It assumes that error during initialization is a fatal error,
but in our cases it always is.

This patch is a followp up to
https://review.spdk.io/gerrit/c/spdk/spdk/+/930

lvol_ut.c is the only test that skipped because
it runs same tests multiple times which is not allowed
by new method.

Change-Id: I0baf7ad09a35d5fca2dc4a03b4453c12c14f38a7
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1238
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>

show more ...

blobfs: start a poller to do cache buffer reclaim regularly

Currently we will free the cache buffers in the file R/W
data path, however we can start a thread to do the cache
buffer reclaim regulary,

blobfs: start a poller to do cache buffer reclaim regularly

Currently we will free the cache buffers in the file R/W
data path, however we can start a thread to do the cache
buffer reclaim regulary, so that we don't need to free
the cache buffer in the Rocksdb thread context. By
doing this, we can also remove the global cache buffer
lock in following patches.

Change-Id: Icb0fbc49baecd1e9d86a5fcfe400758dfc3c53a2
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/941
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>

show more ...

UT/blobfs: add a append write over blob boundary UT

Change-Id: Ifc50920ae316ba76719c14d40615a23930457fc8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.

UT/blobfs: add a append write over blob boundary UT

Change-Id: Ifc50920ae316ba76719c14d40615a23930457fc8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464083
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>

show more ...

ut/blobfs: fix blobfs_sync_ut hang issue when testing file_length

we use this statement:
while (g_file->length_flushed != buf_length) {} in
file_length function.

It means that in this test case, le

ut/blobfs: fix blobfs_sync_ut hang issue when testing file_length

we use this statement:
while (g_file->length_flushed != buf_length) {} in
file_length function.

It means that in this test case, length_flushed are
accessed by two different threads, so better to
use another new variable length_flused with volatile
before the variable definition. Then our ut will not hang.

Change-Id: I6152a4ba3f27f0fad1c8c2baa71324a36a2fb9e8
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456580
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>

show more ...

blobfs: don't flush a partial buffer with no sync pending

We flush a cache buffer once it's filled. When the write
for that cache buffer has completed, we look to see if
there's more data to flush.

blobfs: don't flush a partial buffer with no sync pending

We flush a cache buffer once it's filled. When the write
for that cache buffer has completed, we look to see if
there's more data to flush. Currently if there's *any*
more data to flush, we will flush it, even if it's not
a full buffer.

That can hurt performance though. Ideally we only want
to flush a partial buffer if there's been an explicit
sync operation that requires that partial buffer to be
flushed. Otherwise we will end up writing the partial
buffer to disk, and then come back and write that data
again later when the buffer is full.

Add a new unit test to test for this condition. This
patch breaks one of the existing unit tests which was
designed specifically around a RocksDB failure condition.
Change that file_length unit test to now write exactly
one CACHE_BUFFER, which still tests the general logic
making sure that we don't confuse the amount of data
flushed with the value written to the file's length
xattr.

Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I83795fb45afe854b38648d0e0c1a7928219307a2

Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455698
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>

show more ...

blobfs: ensure length xattr is written even if all data is flushed

Data can get implicitly flushed as cache buffers are filled. But
the length xattr is only written in response to a sync or close
o

blobfs: ensure length xattr is written even if all data is flushed

Data can get implicitly flushed as cache buffers are filled. But
the length xattr is only written in response to a sync or close
operation. So we cannot just look at the amount of data flushed,
and ignore the sync operation if all of the data written has been
flushed - we still need to write the length xattr.

This also adds a unit test which reproduces the original problem.

Fixes issue #297.

Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icca6ef4d1544f72e9bc31c4ee77d26b4b7f0cce4

Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455692
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>

show more ...

UT/blobfs: add rename UT to blobfs_sync_ut

Change-Id: I17c34a02cbffce4078ef82cfc191394a7440ba52
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk

UT/blobfs: add rename UT to blobfs_sync_ut

Change-Id: I17c34a02cbffce4078ef82cfc191394a7440ba52
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455151
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>

show more ...

UT/blobfs: add data verification test to blobfs_sync_ut

Change-Id: If61ea8fcc96b02e9b6af9c2bb5bc703d4e2f46bf
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrit

UT/blobfs: add data verification test to blobfs_sync_ut

Change-Id: If61ea8fcc96b02e9b6af9c2bb5bc703d4e2f46bf
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455145
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>

show more ...

thread: Add a mechanism to exit a lightweight thread

Lightweight threads may now be exited by calling
spdk_thread_exit() within the thread. The framework
polling the thread can release the resources

thread: Add a mechanism to exit a lightweight thread

Lightweight threads may now be exited by calling
spdk_thread_exit() within the thread. The framework
polling the thread can release the resources associated
with that lightweight thread by calling
spdk_thread_destroy().

Change-Id: I6586b9d22556b3874fb113ce5402c6b1f371786e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455319
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>

show more ...

blobfs: remove trace short names

They were removed from the trace API and BlobFS doesn't
compile right now.

Change-Id: Ie98339f19353e4db901af551c706f57c18b89fc5
Signed-off-by: Darek Stojaczyk <dari

blobfs: remove trace short names

They were removed from the trace API and BlobFS doesn't
compile right now.

Change-Id: Ie98339f19353e4db901af551c706f57c18b89fc5
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452863
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>

show more ...