bdev/null: Make DIF PI format configurable at bdev creation

Make bdev's PI format configurable via the bdev_null_create RPC.
Add the same check as the NVMe specification, for example, metadata
size

bdev/null: Make DIF PI format configurable at bdev creation

Make bdev's PI format configurable via the bdev_null_create RPC.
Add the same check as the NVMe specification, for example, metadata
size should not be less than 16 bytes if format is 16/32b Guard PI.

Additionally, add dif_pi_format into write_json_config().

Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I64a53fd3d6dae4c85865c5174d86a55854d74d87
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/24110
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <jim.harris@samsung.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>

show more ...

bdev/null: Delegate or remove DIF config check of bdev_null_create RPC

NULL bdev module supports only interleaved metadata. opts->block_size is
data block size. Hence, comparing opts->block_size and

bdev/null: Delegate or remove DIF config check of bdev_null_create RPC

NULL bdev module supports only interleaved metadata. opts->block_size is
data block size. Hence, comparing opts->block_size and opts->md_size was
a long check. Remove it.

Checking if opts->num_blocks is non-zero was duplicated.

As same as malloc bdev, we can move opts->physical_block_size check to
bdev_null_create().

We can delegate DIF type check to spdk_dif_ctx_init().

Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ia2030d509db55f155121175694d5e82d45c49671
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/24208
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <jim.harris@samsung.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Community-CI: Mellanox Build Bot

show more ...

bdev/null: bdev_null_create RPC uses bdev_null_opts directly

The bdev_null_create RPC set rpc_construct_null structure and copied
it to null_bdev_opts structure. However, this was not efficient or
c

bdev/null: bdev_null_create RPC uses bdev_null_opts directly

The bdev_null_create RPC set rpc_construct_null structure and copied
it to null_bdev_opts structure. However, this was not efficient or
clean.

The difference of rpc_construct_null structure and null_bdev_opts
structure were:
1. null_bdev_opts::block_size was block size,
rpc_construct_null::block_size was data block size
2. null_bdev_opts::uuid was pointer, rpc_construct_null::uuid was
instance

For #1, as we do for malloc bdev, we can use null_bdev_opts::block_size
as data block size. If null_bdev_opts::block_size is data block size,
we do not have to compare opts::block_size and opts::md_size.

For #2, as we do for malloc bdev, null_bdev_opts::uuid can be instance
and we can copy null_bdev_opts::uuid to spdk_bdev::uuid.

Additionally, spdk_null_bdev_opts is not a public data structure. Hence,
it should not have "spdk_" prefix.

Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: If53702071cf02fe23d03f464a63c2495c70e1f12
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/24109
Reviewed-by: Jim Harris <jim.harris@samsung.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot

show more ...

bdev/null: Remove md_interleave from null_bdev_opts

Null bdev module supports only interleaved metadata. We can remove
md_interleave from null_bdev_opts and just set md_interleave to true at
bdev cr

bdev/null: Remove md_interleave from null_bdev_opts

Null bdev module supports only interleaved metadata. We can remove
md_interleave from null_bdev_opts and just set md_interleave to true at
bdev creation.

Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I60eb1769914d62a3e855d893b03199b395631100
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/24207
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <jim.harris@samsung.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>

show more ...

bdev/null: use the same way as Malloc to create device with metadata

When creating device with metadata, `block_size` means data block
size without including metadata size, this is the same as Mallo

bdev/null: use the same way as Malloc to create device with metadata

When creating device with metadata, `block_size` means data block
size without including metadata size, this is the same as Malloc
device. Also check the input metadata size.

Fix #3191.

Change-Id: I8b64e0605de2e42ee053e749720f74706b623835
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/20643
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Karol Latecki <karol.latecki@intel.com>

show more ...

rpc: use spdk_json_decode_uuid() to decode UUIDs

Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I99e5d44d2cea4d50219b44e4595379a3a17bd11f
Reviewed-on: https://review.spdk.io/ger

rpc: use spdk_json_decode_uuid() to decode UUIDs

Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I99e5d44d2cea4d50219b44e4595379a3a17bd11f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/20475
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <jim.harris@samsung.com>

show more ...

null_bdev: Add physical block size optional argument

In the past we didn't use the distinction between logical block size and physical block
size in null bdev. Now we can optionally set the physical

null_bdev: Add physical block size optional argument

In the past we didn't use the distinction between logical block size and physical block
size in null bdev. Now we can optionally set the physical block size to
be different then logical block size. It's useful for testing NVMe 512e
Advanced Format scenarios.

Change-Id: Ib3713af9a4d0ce7fd322170b4d87100cfc91a103
Signed-off-by: Panfil, Wojciech <wojciech.panfil@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16792
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>

show more ...

update Intel copyright notices

per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.

git log --follow -C90% --format=%ad --date defa

update Intel copyright notices

per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.

git log --follow -C90% --format=%ad --date default <file> | tail -1

and then pull just the 4 digit year from the result.

Intel copyrights were not added to files where Intel either had
no contribution ot the contribution lacked substance (ie license
header updates, formatting changes, etc). Contribution date used
"--follow -C95%" to get the most accurate date.

Note that several files in this patch didn't end the license/(c)
block with a blank comment line so these were added as the vast
majority of files do have this last blank line. Simply there for
consistency.

Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id5b7ce4f658fe87132f14139ead58d6e285c04d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot

show more ...

Replace most BSD 3-clause license text with SPDX identifier.

Many open source projects have moved to using SPDX identifiers
to specify license information, reducing the amount of
boilerplate code in

Replace most BSD 3-clause license text with SPDX identifier.

Many open source projects have moved to using SPDX identifiers
to specify license information, reducing the amount of
boilerplate code in every source file. This patch replaces
the bulk of SPDK .c, .cpp and Makefiles with the BSD-3-Clause
identifier.

Almost all of these files share the exact same license text,
and this patch only modifies the files that contain the
most common license text. There can be slight variations
because the third clause contains company names - most say
"Intel Corporation", but there are instances for Nvidia,
Samsung, Eideticom and even "the copyright holder".

Used a bash script to automate replacement of the license text
with SPDX identifier which is checked into scripts/spdx.sh.

Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa88ab5e92ea471691dc298cfe41ebfb5d169780
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12904
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <qun.wan@intel.com>

show more ...

bdev_malloc and bdev_null : remove support for deprecated RPC names

These were deprecated in 2019, it's time to remove
support for them now.

Change-Id: Ic80ce74344b24814dad792cfff6a4791d0430527
Sig

bdev_malloc and bdev_null : remove support for deprecated RPC names

These were deprecated in 2019, it's time to remove
support for them now.

Change-Id: Ic80ce74344b24814dad792cfff6a4791d0430527
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12741
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>

show more ...

bdev/null: Use bdev_open_ext() for resize instead of bdev_get_by_name()

Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I9381aad017fae63b725deb21790bf4e3f717c88e
Reviewed-on: http

bdev/null: Use bdev_open_ext() for resize instead of bdev_get_by_name()

Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I9381aad017fae63b725deb21790bf4e3f717c88e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12072
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>

show more ...

module/bdev: Use spdk_bdev_unregister_by_name() if possible

Replace spdk_bdev_get_by_name() + spdk_bdev_unregister() by
spdk_bdev_unregister_by_name() wherever possible.

This simplifies the code an

module/bdev: Use spdk_bdev_unregister_by_name() if possible

Replace spdk_bdev_get_by_name() + spdk_bdev_unregister() by
spdk_bdev_unregister_by_name() wherever possible.

This simplifies the code and makes the code more reliable.

Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I91388c9d0b2e244cb745720a480803b03c42a226
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12066
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>

show more ...

module/bdev: Send not boolean false but error response for deletion RPCs

For deletion RPCs, a boolean false response had been sent rather than
a error response when they failed. However, boolean fal

module/bdev: Send not boolean false but error response for deletion RPCs

For deletion RPCs, a boolean false response had been sent rather than
a error response when they failed. However, boolean false resonse had
caused false negative, that is, test code had regarded as success by
mistake. For example, the following test code regards as success if
JSON RPC returns a boolean false response.

if $rpc_py bdev_pmem_delete $pmem_bdev_name; then
error "bdev_pmem_delete deleted pmem bdev for second time!"
fi

This patch fixes such false negative issue by explicitly returning a
error response if deletion RPCs fail.

Only the bdev_virtio_detach_controller RPC has implemented this.

Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: I5409a070cbd2364dbb63b42421b032534c6f9a0b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12077
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>

show more ...

bdev_null: add null bdev resize rpc

Usually null bdev is used in testing.
The resize function provides flexibility

Change-Id: I603db0b85ff13a86d38ccc8dd6f260807393df93
Signed-off-by: Jin Yu <jin.yu

bdev_null: add null bdev resize rpc

Usually null bdev is used in testing.
The resize function provides flexibility

Change-Id: I603db0b85ff13a86d38ccc8dd6f260807393df93
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5797
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>

show more ...

lib/jsonrpc: Add a new API to send response for writing bool result.

There are many duplicated codes about sending response for writing bool result.
That we need a function to do this.
Then we can r

lib/jsonrpc: Add a new API to send response for writing bool result.

There are many duplicated codes about sending response for writing bool result.
That we need a function to do this.
Then we can reduce many codes.

Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ic439111b1e9ca1013f8c657ab925f0c27a7be699
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5033
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>

show more ...

log: remove internal log.h header

There is nothing left here, so remove it.

Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib947d42bc577dbebb4650b1be885e05a80f8f8cf
Reviewed-

log: remove internal log.h header

There is nothing left here, so remove it.

Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib947d42bc577dbebb4650b1be885e05a80f8f8cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI

show more ...

log: simplify SPDK_LOG_REGISTER_COMPONENT

This patch removes the string from register component.
Removed are all instances in libs or hardcoded in apps.

Starting with this patch literal passed to r

log: simplify SPDK_LOG_REGISTER_COMPONENT

This patch removes the string from register component.
Removed are all instances in libs or hardcoded in apps.

Starting with this patch literal passed to register,
serves as name for the flag.

All instances of SPDK_LOG_* were replaced with just *
in lowercase.
No actual name change for flags occur in this patch.

Affected are SPDK_LOG_REGISTER_COMPONENT() and
SPDK_*LOG() macros.

Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I002b232fde57ecf9c6777726b181fc0341f1bb17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI

show more ...

bdev/null: make md_size inclusive for dif_type

When using --dif-type option --md-size should be
required as well.
Update & improve bdev_null_create rpc.py help
messages as well.

Change-Id: I6588a97

bdev/null: make md_size inclusive for dif_type

When using --dif-type option --md-size should be
required as well.
Update & improve bdev_null_create rpc.py help
messages as well.

Change-Id: I6588a97aef6c8792bab7a41ece17c0461bb36844
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3949
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>

show more ...

module/bdev_null: remove spdk prefix from static functions.

Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib4887b503149f207ca7196c4369a4315fa50c001
Reviewed-on: https://review.spdk.i

module/bdev_null: remove spdk prefix from static functions.

Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib4887b503149f207ca7196c4369a4315fa50c001
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2328
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>

show more ...

scripts/rpc: Rename rpc related to null bdev

Rename construct_null_bdev to bdev_null_create
Rename delete_null_bdev to bdev_null_delete

Change-Id: I2390b14ac62130eaf20b2c43ebd30c763eca34de
Signed-o

scripts/rpc: Rename rpc related to null bdev

Rename construct_null_bdev to bdev_null_create
Rename delete_null_bdev to bdev_null_delete

Change-Id: I2390b14ac62130eaf20b2c43ebd30c763eca34de
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465789
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>

show more ...

bdev/null: Add data protection options to construct_null_bdev RPC method

Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off

bdev/null: Add data protection options to construct_null_bdev RPC method

Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I9ba8370685630668a577f4ea79334f148d03b37f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464781
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>

show more ...

bdev/null: Add metadata size option to construct_null_bdev RPC method

Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by

bdev/null: Add metadata size option to construct_null_bdev RPC method

Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I31f40dd539a153a4f5ff1c3e78f49bd021154e39
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464778
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>

show more ...

mk: move the bdev modules under module directory.

This is more accurate to what they are, and will make defining library
dependencies much simpler. This change in directory does not affect the
final

mk: move the bdev modules under module directory.

This is more accurate to what they are, and will make defining library
dependencies much simpler. This change in directory does not affect the
final placement of naming of libraries at the end of time.

Change-Id: Ic48a9233dff564e39ce357a9ea0a111ea2b6414b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465454
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>

show more ...