bdev/compress: Supports the specified compression algorithm

compress bdev Indicates that compression uses the synchronization
mechanism and only deflate is supported. However, for some business
scen

bdev/compress: Supports the specified compression algorithm

compress bdev Indicates that compression uses the synchronization
mechanism and only deflate is supported. However, for some business
scenarios, it is more concerned with compression performance than
compression rate. So we provide extensions that support multiple
compression algorithms

Change-Id: I36b93875eed3069aa0c74843d98e4a0c90412b9e
Signed-off-by: Yankun Li <845245370@qq.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/24452
Reviewed-by: GangCao <gang.cao@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>

show more ...

bdev/compress: change comp bdev creation logic to asynchronous

Change-Id: Icb57244c2e0b52026ebdd73f9f42326ba8b96570
Signed-off-by: Yankun Li <845245370@qq.com>
Reviewed-on: https://review.spdk.io/ge

bdev/compress: change comp bdev creation logic to asynchronous

Change-Id: Icb57244c2e0b52026ebdd73f9f42326ba8b96570
Signed-off-by: Yankun Li <845245370@qq.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/24403
Reviewed-by: GangCao <gang.cao@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <jim.harris@samsung.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot

show more ...

module/bdev: Use error_response() rather than bool_response(false) for JSON RPCs

For JSON RPC, boolean response with false value may not be regarded as error.
Previously many cases were replaced to

module/bdev: Use error_response() rather than bool_response(false) for JSON RPCs

For JSON RPC, boolean response with false value may not be regarded as error.
Previously many cases were replaced to use
spdk_jsonrpc_send_error_response() explicitly. However, this pattern did
not become established and new bdev modules used
spdk_jsonrpc_send_bool_response() with false.

Once again, replace remaining cases in this patch.

Signed-off-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Change-Id: Ie8858bc8ff7c36bc3a829977044a91d459db76f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/16555
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>

show more ...

bdev/compress: Port to use accel_fw instead of compressdev
directly

This patch removes hardcoded compressdev code from the
vbdev module and instead uses the accel_fw. The port required
a few changes

bdev/compress: Port to use accel_fw instead of compressdev
directly

This patch removes hardcoded compressdev code from the
vbdev module and instead uses the accel_fw. The port required
a few changes based on how things are plumbed and accessed,
nothing that isn't be too obscure. CI tests were updated to
run ISAL accel_fw module as well as DPDK compressdev with QAT.

Unit tests for the new module will follow in a separate patch.

Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I769cbc888658fb846d89f6f0bfeeb1a2a820767e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13610
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>

show more ...

update Intel copyright notices

per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.

git log --follow -C90% --format=%ad --date defa

update Intel copyright notices

per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.

git log --follow -C90% --format=%ad --date default <file> | tail -1

and then pull just the 4 digit year from the result.

Intel copyrights were not added to files where Intel either had
no contribution ot the contribution lacked substance (ie license
header updates, formatting changes, etc). Contribution date used
"--follow -C95%" to get the most accurate date.

Note that several files in this patch didn't end the license/(c)
block with a blank comment line so these were added as the vast
majority of files do have this last blank line. Simply there for
consistency.

Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id5b7ce4f658fe87132f14139ead58d6e285c04d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot

show more ...

bdev/compress: make lb_size optional in bdev_compress_create

Treat it as zero if the user doesn't provide it. This will make it
consistent with other RPCs and the behavior of that command in
script

bdev/compress: make lb_size optional in bdev_compress_create

Treat it as zero if the user doesn't provide it. This will make it
consistent with other RPCs and the behavior of that command in
scripts/rpc.py.

Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ic5505f853bc203fb1144ba3f1f44c736563a3677
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13529
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>

show more ...

Replace most BSD 3-clause license text with SPDX identifier.

Many open source projects have moved to using SPDX identifiers
to specify license information, reducing the amount of
boilerplate code in

Replace most BSD 3-clause license text with SPDX identifier.

Many open source projects have moved to using SPDX identifiers
to specify license information, reducing the amount of
boilerplate code in every source file. This patch replaces
the bulk of SPDK .c, .cpp and Makefiles with the BSD-3-Clause
identifier.

Almost all of these files share the exact same license text,
and this patch only modifies the files that contain the
most common license text. There can be slight variations
because the third clause contains company names - most say
"Intel Corporation", but there are instances for Nvidia,
Samsung, Eideticom and even "the copyright holder".

Used a bash script to automate replacement of the license text
with SPDX identifier which is checked into scripts/spdx.sh.

Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa88ab5e92ea471691dc298cfe41ebfb5d169780
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12904
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <qun.wan@intel.com>

show more ...

bdev module: remove support for deprecated RPC names

These were deprecated in 2019, it's time to remove
support for them now.

Change-Id: I9e203a52877802127df8144e68090d7975f9d200
Signed-off-by: wan

bdev module: remove support for deprecated RPC names

These were deprecated in 2019, it's time to remove
support for them now.

Change-Id: I9e203a52877802127df8144e68090d7975f9d200
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12772
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>

show more ...

module/bdev/compress: print a reasonable message on create error

Specifically when a compress bdev already exists on the supplied
base. Before this you'd get a bunch of nasty messages providing
rea

module/bdev/compress: print a reasonable message on create error

Specifically when a compress bdev already exists on the supplied
base. Before this you'd get a bunch of nasty messages providing
really no clue as to what was wrong.

Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I8cce8902909659fba0e9613891c7ef8ebe4b06d0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/11806
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>

show more ...

lib/jsonrpc: Add a new API to send response for writing bool result.

There are many duplicated codes about sending response for writing bool result.
That we need a function to do this.
Then we can r

lib/jsonrpc: Add a new API to send response for writing bool result.

There are many duplicated codes about sending response for writing bool result.
That we need a function to do this.
Then we can reduce many codes.

Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ic439111b1e9ca1013f8c657ab925f0c27a7be699
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5033
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>

show more ...

log: remove internal log.h header

There is nothing left here, so remove it.

Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib947d42bc577dbebb4650b1be885e05a80f8f8cf
Reviewed-

log: remove internal log.h header

There is nothing left here, so remove it.

Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib947d42bc577dbebb4650b1be885e05a80f8f8cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI

show more ...

log: simplify SPDK_LOG_REGISTER_COMPONENT

This patch removes the string from register component.
Removed are all instances in libs or hardcoded in apps.

Starting with this patch literal passed to r

log: simplify SPDK_LOG_REGISTER_COMPONENT

This patch removes the string from register component.
Removed are all instances in libs or hardcoded in apps.

Starting with this patch literal passed to register,
serves as name for the flag.

All instances of SPDK_LOG_* were replaced with just *
in lowercase.
No actual name change for flags occur in this patch.

Affected are SPDK_LOG_REGISTER_COMPONENT() and
SPDK_*LOG() macros.

Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I002b232fde57ecf9c6777726b181fc0341f1bb17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI

show more ...

bdev/compress: rename RPC to match standard naming

Not sure how this one was missed back during the big rename party.

Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia00819a2c2e8c81ad0

bdev/compress: rename RPC to match standard naming

Not sure how this one was missed back during the big rename party.

Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia00819a2c2e8c81ad0499f4081667dde04fa726e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4140
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>

show more ...

module/compress: add new parm to RPC for create compress vol

To specify the desired logical block size. Must be 4K or 512.
If no block size is provided a default of 0 means to use the
underlying bde

module/compress: add new parm to RPC for create compress vol

To specify the desired logical block size. Must be 4K or 512.
If no block size is provided a default of 0 means to use the
underlying bdev block size. For cases where something other
than 4K or 512 is desired, format the underlying device
accordingly and don't specify a logical block size on creation
of the compress vol.

Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I58b71e210cfa77b3237c0c454585c734e2e22aea
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3177
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>

show more ...

module/bdev_compress: remove spdk prefix from static functions.

Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I7d3fd307a89592ed854e6d63852b895d44984644
Reviewed-on: https://review.sp

module/bdev_compress: remove spdk prefix from static functions.

Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I7d3fd307a89592ed854e6d63852b895d44984644
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2319
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>

show more ...

module/compress: rename set_compress_pmd RPC to match convention

set_compress_pmd -> compress_set_pmd

Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Icb1ecc7adfe10485c44f98ab9e31eaa685

module/compress: rename set_compress_pmd RPC to match convention

set_compress_pmd -> compress_set_pmd

Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Icb1ecc7adfe10485c44f98ab9e31eaa6857596e7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482597
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>

show more ...

mk: move the bdev modules under module directory.

This is more accurate to what they are, and will make defining library
dependencies much simpler. This change in directory does not affect the
final

mk: move the bdev modules under module directory.

This is more accurate to what they are, and will make defining library
dependencies much simpler. This change in directory does not affect the
final placement of naming of libraries at the end of time.

Change-Id: Ic48a9233dff564e39ce357a9ea0a111ea2b6414b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465454
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>

show more ...