bdev/compress: Supports the specified compression algorithm

compress bdev Indicates that compression uses the synchronization
mechanism and only deflate is supported. However, for some business
scen

bdev/compress: Supports the specified compression algorithm

compress bdev Indicates that compression uses the synchronization
mechanism and only deflate is supported. However, for some business
scenarios, it is more concerned with compression performance than
compression rate. So we provide extensions that support multiple
compression algorithms

Change-Id: I36b93875eed3069aa0c74843d98e4a0c90412b9e
Signed-off-by: Yankun Li <845245370@qq.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/24452
Reviewed-by: GangCao <gang.cao@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>

show more ...

bdev/compress: change comp bdev creation logic to asynchronous

Change-Id: Icb57244c2e0b52026ebdd73f9f42326ba8b96570
Signed-off-by: Yankun Li <845245370@qq.com>
Reviewed-on: https://review.spdk.io/ge

bdev/compress: change comp bdev creation logic to asynchronous

Change-Id: Icb57244c2e0b52026ebdd73f9f42326ba8b96570
Signed-off-by: Yankun Li <845245370@qq.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/24403
Reviewed-by: GangCao <gang.cao@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <jim.harris@samsung.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot

show more ...

bdev/compress: Port to use accel_fw instead of compressdev
directly

This patch removes hardcoded compressdev code from the
vbdev module and instead uses the accel_fw. The port required
a few changes

bdev/compress: Port to use accel_fw instead of compressdev
directly

This patch removes hardcoded compressdev code from the
vbdev module and instead uses the accel_fw. The port required
a few changes based on how things are plumbed and accessed,
nothing that isn't be too obscure. CI tests were updated to
run ISAL accel_fw module as well as DPDK compressdev with QAT.

Unit tests for the new module will follow in a separate patch.

Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I769cbc888658fb846d89f6f0bfeeb1a2a820767e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/13610
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>

show more ...

update Intel copyright notices

per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.

git log --follow -C90% --format=%ad --date defa

update Intel copyright notices

per Intel policy to include file commit date using git cmd
below. The policy does not apply to non-Intel (C) notices.

git log --follow -C90% --format=%ad --date default <file> | tail -1

and then pull just the 4 digit year from the result.

Intel copyrights were not added to files where Intel either had
no contribution ot the contribution lacked substance (ie license
header updates, formatting changes, etc). Contribution date used
"--follow -C95%" to get the most accurate date.

Note that several files in this patch didn't end the license/(c)
block with a blank comment line so these were added as the vast
majority of files do have this last blank line. Simply there for
consistency.

Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id5b7ce4f658fe87132f14139ead58d6e285c04d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/15192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot

show more ...

Replace most BSD 3-clause license text with SPDX identifier.

Many open source projects have moved to using SPDX identifiers
to specify license information, reducing the amount of
boilerplate code in

Replace most BSD 3-clause license text with SPDX identifier.

Many open source projects have moved to using SPDX identifiers
to specify license information, reducing the amount of
boilerplate code in every source file. This patch replaces
the bulk of SPDK .c, .cpp and Makefiles with the BSD-3-Clause
identifier.

Almost all of these files share the exact same license text,
and this patch only modifies the files that contain the
most common license text. There can be slight variations
because the third clause contains company names - most say
"Intel Corporation", but there are instances for Nvidia,
Samsung, Eideticom and even "the copyright holder".

Used a bash script to automate replacement of the license text
with SPDX identifier which is checked into scripts/spdx.sh.

Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaa88ab5e92ea471691dc298cfe41ebfb5d169780
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/12904
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@nvidia.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <qun.wan@intel.com>

show more ...

compress: Add RPC option to enable mlx5_pci PMD

Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I31efa2f9dd1aafdb87904083e56d693a699af526
Reviewed-on: https://review.spdk.io/gerrit

compress: Add RPC option to enable mlx5_pci PMD

Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I31efa2f9dd1aafdb87904083e56d693a699af526
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8781
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>

show more ...

module/compress: add new parm to RPC for create compress vol

To specify the desired logical block size. Must be 4K or 512.
If no block size is provided a default of 0 means to use the
underlying bde

module/compress: add new parm to RPC for create compress vol

To specify the desired logical block size. Must be 4K or 512.
If no block size is provided a default of 0 means to use the
underlying bdev block size. For cases where something other
than 4K or 512 is desired, format the underlying device
accordingly and don't specify a logical block size on creation
of the compress vol.

Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I58b71e210cfa77b3237c0c454585c734e2e22aea
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3177
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>

show more ...

module/compress: rename set_compress_pmd RPC to match convention

set_compress_pmd -> compress_set_pmd

Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Icb1ecc7adfe10485c44f98ab9e31eaa685

module/compress: rename set_compress_pmd RPC to match convention

set_compress_pmd -> compress_set_pmd

Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Icb1ecc7adfe10485c44f98ab9e31eaa6857596e7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482597
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>

show more ...

mk: move the bdev modules under module directory.

This is more accurate to what they are, and will make defining library
dependencies much simpler. This change in directory does not affect the
final

mk: move the bdev modules under module directory.

This is more accurate to what they are, and will make defining library
dependencies much simpler. This change in directory does not affect the
final placement of naming of libraries at the end of time.

Change-Id: Ic48a9233dff564e39ce357a9ea0a111ea2b6414b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465454
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>

show more ...