6973638 NULL pointer panic in pmcs_tgt_event_recovery()

6973916 pmcs smp synchronization change causing livelocks

6972643 pmcs: attached-port-pm/target-port-pm not set correctly on hotplug.
6974601 scsi: probe/reset get chatty if lun-reset prop is not supported

6974282 pkt can get completed before timer gets set

6968895 only one path seen on JBOD after SAS cable pull/reinsert
6971809 target failing to reenumerate after being moved from one PHY to another

6956485 format command hangs after a few chassis poweroff/on operations on expansion chassis configuration
6957428 Max-maguro+SAS2: System crash while other head was upgrading from Q1.1.0 to Q1.2.0

6967233 target should be cleared in pmcs_clone_phy
6959995 onwire bit for work structures never gets cleared

6965204 pmcs mdb module queue dump by device_id

6957990 RCC hotplug causes panic - Deadlock: cycle in blocking chain
6962090 bad mutex panic in pmcs_update_phy_pm_props

6957598 fix for 6952400 needs fixing

6955322 Anago: i/o from FC client failed on LCC pull; appliance kit failed
6952400 assertion failed: phyp->ref_count != 0 pmcs_subr.c, line: 7815

6952363 pmcs_flush_nonio_cmds() flushes entire HBA rather than single target
6948108 lcc hot plug causes hang on expansion chassis configuration
6943143 assertion failed: 'phyp->dead'after cable pull

6952363 pmcs_flush_nonio_cmds() flushes entire HBA rather than single target
6948108 lcc hot plug causes hang on expansion chassis configuration
6943143 assertion failed: 'phyp->dead'after cable pull/plug on RCC0
6945660 device probe causes hang in expansion chassis configuration
6946033 pmcs_pwork() and pmcs_lock_phy() ordering needs to be fixed
6945627 page fault after pulling cable between T4 and Riverwalk2
6951517 pcms may send IOMB with invalid device handle
6951959 pmcs_abort() contains dead code

show more ...

6953065 pmcs_reset_phy is not actually resetting remote PHYs
6953215 scsi_device associated with a virtual phy should have 'bridge-port' property

6946938 SCSAv3: sometimes phymaps observations fail to activate
6950461 SCSAv3: should be able to modunload the pmcs driver
6951142 scsi_ifsetcap should always update dma_attr_granular when tran_setu

6946938 SCSAv3: sometimes phymaps observations fail to activate
6950461 SCSAv3: should be able to modunload the pmcs driver
6951142 scsi_ifsetcap should always update dma_attr_granular when tran_setup_pkt is defined
6951267 fix for 6948076 can still double-allocate a preassigned instance number
6951616 sunmdi.c should avoid unnecessary use of ct_dip

show more ...

6938818 SAS LZ latency increases dramatically after 30 minutes

6940745 work structures without a pmcs_cmd_t need to be cleaned up after hot reset
6945802 potential null dereference in pmcs_create_one_phy_stats()

6675356 multiple invocations of 'modunload -i 0' needed for maximum memory reduction
6944220 SCSAv3: tgtmap bus_config needs to coordinate attach/hotplug window

6938956 firmware upgrade occasionally fails the first time
6941402 receptacle-pm should be a string array
6941407 better synchronization between the driver debug log and firmware event log
6941862 In

6938956 firmware upgrade occasionally fails the first time
6941402 receptacle-pm should be a string array
6941407 better synchronization between the driver debug log and firmware event log
6941862 Increase default log buffer size

show more ...

6889153 Dubious check in pmcs_unattach
6936793 VTS diskmediatest causes system panic in pmcs_lock_phy
6855987 pmcs: need to revisit cv_timed_wait() and cv_wait() use
6937422 deadlock panic during sto

6889153 Dubious check in pmcs_unattach
6936793 VTS diskmediatest causes system panic in pmcs_lock_phy
6855987 pmcs: need to revisit cv_timed_wait() and cv_wait() use
6937422 deadlock panic during storage poweron

show more ...

6895299 No SAS_phy_stat kstat counters are created after moving cable from one SIM to another

6916341 FW87_ND: panic pmcs:pmcs_validate_vpd+33a
6935831 sorting work structures by serial number would be nice
6936826 pmcs: add "receptacle-label" and "receptacle-pm" properties to HBA node for FM

6916341 FW87_ND: panic pmcs:pmcs_validate_vpd+33a
6935831 sorting work structures by serial number would be nice
6936826 pmcs: add "receptacle-label" and "receptacle-pm" properties to HBA node for FMA
6936827 pmcs: add "target-port-depth" property to represent depth of device in fabric
6938625 Intermittent retryable OPEN REJECT timeouts Thebe / RW2 / Muskie 2T

show more ...

6928278 scsav3: scsi_hba_tgtmap_set_flush

6916195 Update Thebe to firmware 1.09.02
6929376 Add ila version info to sasinfo command and firmware update messages
6936954 ITNT should be set to 2 seconds

6929808 pmcs_check_forward_progress() is a bit reset-happy

6926075 hotplug operations on LCC cause lost of expanders
6925344 driver should validate SAS address before reporting into target map