History log of /netbsd-src/common/lib/libc/arch/mips/atomic/atomic_cas.S (Results 1 – 8 of 8)
Revision Date Author Comments
# 05a5e24c 27-Feb-2022 riastradh <riastradh@NetBSD.org>

mips: Membar audit.

This change should be safe because it doesn't remove or weaken any
memory barriers, but does add, clarify, or strengthen barriers.

Goals:

- Make sure mutex_enter/exit and mutex

mips: Membar audit.

This change should be safe because it doesn't remove or weaken any
memory barriers, but does add, clarify, or strengthen barriers.

Goals:

- Make sure mutex_enter/exit and mutex_spin_enter/exit have
acquire/release semantics.

- New macros make maintenance easier and purpose clearer:

. SYNC_ACQ is for load-before-load/store barrier, and BDSYNC_ACQ
for a branch delay slot -- currently defined as plain sync for MP
and nothing, or nop, for UP; thus it is no weaker than SYNC and
BDSYNC as currently defined, which is syncw on Octeon, plain sync
on non-Octeon MP, and nothing/nop on UP.

It is not clear to me whether load-then-syncw or ll/sc-then-syncw
or even bare load provides load-acquire semantics on Octeon -- if
no, this will fix bugs; if yes (like it is on SPARC PSO), we can
relax SYNC_ACQ to be syncw or nothing later.

. SYNC_REL is for load/store-before-store barrier -- currently
defined as plain sync for MP and nothing for UP.

It is not clear to me whether syncw-then-store is enough for
store-release on Octeon -- if no, we can leave this as is; if
yes, we can relax SYNC_REL to be syncw on Octeon.

. SYNC_PLUNGER is there to flush clogged Cavium store buffers, and
BDSYNC_PLUNGER for a branch delay slot -- syncw on Octeon,
nothing or nop on non-Octeon.

=> This is not necessary (or, as far as I'm aware, sufficient)
for acquire semantics -- it serves only to flush store buffers
where stores might otherwise linger for hundreds of thousands
of cycles, which would, e.g., cause spin locks to be held for
unreasonably long durations.

Newerish revisions of the MIPS ISA also have finer-grained sync
variants that could be plopped in here.

Mechanism:

Insert these barriers in the right places, replacing only those where
the definition is currently equivalent, so this change is safe.

- Replace #ifdef _MIPS_ARCH_OCTEONP / syncw / #endif at the end of
atomic_cas_* by SYNC_PLUNGER, which is `sync 4' (a.k.a. syncw) if
__OCTEON__ and empty otherwise.

=> From what I can tell, __OCTEON__ is defined in at least as many
contexts as _MIPS_ARCH_OCTEONP -- i.e., there are some Octeons
with no _MIPS_ARCH_OCTEONP, but I don't know if any of them are
relevant to us or ever saw the light of day outside Cavium; we
seem to buid with `-march=octeonp' so this is unlikely to make a
difference. If it turns out that we do care, well, now there's
a central place to make the distinction for sync instructions.

- Replace post-ll/sc SYNC by SYNC_ACQ in _atomic_cas_*, which are
internal kernel versions used in sys/arch/mips/include/lock.h where
it assumes they have load-acquire semantics. Should move this to
lock.h later, since we _don't_ define __HAVE_ATOMIC_AS_MEMBAR on
MIPS and so the extra barrier might be costly.

- Insert SYNC_REL before ll/sc, and replace post-ll/sc SYNC by
SYNC_ACQ, in _ucas_*, which is used without any barriers in futex
code and doesn't mention barriers in the man page so I have to
assume it is required to be a release/acquire barrier.

- Change BDSYNC to BDSYNC_ACQ in mutex_enter and mutex_spin_enter.
This is necessary to provide load-acquire semantics -- unclear if
it was provided already by syncw on Octeon, but it seems more
likely that either (a) no sync or syncw is needed at all, or (b)
syncw is not enough and sync is needed, since syncw is only a
store-before-store ordering barrier.

- Insert SYNC_REL before ll/sc in mutex_exit and mutex_spin_exit.
This is currently redundant with the SYNC already there, but
SYNC_REL more clearly identifies the necessary semantics in case we
want to define it differently on different systems, and having a
sync in the middle of an ll/sc is a bit weird and possibly not a
good idea, so I intend to (carefully) remove the redundant SYNC in
a later change.

- Change BDSYNC to BDSYNC_PLUNGER at the end of mutex_exit. This has
no semantic change right now -- it's syncw on Octeon, sync on
non-Octeon MP, nop on UP -- but we can relax it later to nop on
non-Cavium MP.

- Leave LLSCSYNC in for now -- it is apparently there for a Cavium
erratum, but I'm not sure what the erratum is, exactly, and I have
no reference for it. I suspect these can be safely removed, but we
might have to double up some other syncw instructions -- Linux uses
it only in store-release sequences, not at the head of every ll/sc.

show more ...


# bf8d907e 06-Aug-2020 skrll <skrll@NetBSD.org>

Centralise SYNC/BDSYNC in asm.h and introduce a new LLCSCSYNC and use it
before any ll/sc sequences.

Define LLSCSYNC as syncw; syncw for cnMIPS - issue two as early cnMIPS
has errat{um,a} that means

Centralise SYNC/BDSYNC in asm.h and introduce a new LLCSCSYNC and use it
before any ll/sc sequences.

Define LLSCSYNC as syncw; syncw for cnMIPS - issue two as early cnMIPS
has errat{um,a} that means the first can fail.

show more ...


# 6d4375e1 01-Aug-2020 skrll <skrll@NetBSD.org>

Trailing whitespace


# 8cef165a 20-Feb-2019 rin <rin@NetBSD.org>

Export atomic_cas_32_ni in a similar manner to its 64-bit counterpart.

Compile test only, but seems trivial enough for me.

Fix build error due to test/lib/libc/atomic/t_atomic_cas.

Note that mips3

Export atomic_cas_32_ni in a similar manner to its 64-bit counterpart.

Compile test only, but seems trivial enough for me.

Fix build error due to test/lib/libc/atomic/t_atomic_cas.

Note that mips32 does not use atomic_cas.S.

show more ...


# 6899bcac 19-Feb-2019 martin <martin@NetBSD.org>

Add atomic_cas_64_ni alias


# ac748598 01-Jun-2015 matt <matt@NetBSD.org>

Include OCTEON support for syncw and saa/saad (Store Atomic Add).


# 32c2c5c3 14-Mar-2012 christos <christos@NetBSD.org>

don't include <sys/cdefs.h> from assembly.


# 8daf714e 14-Dec-2009 matt <matt@NetBSD.org>

Merge from matt-nb5-mips64