|
Revision tags: llvmorg-18.1.8, llvmorg-18.1.7, llvmorg-18.1.6, llvmorg-18.1.5, llvmorg-18.1.4, llvmorg-18.1.3, llvmorg-18.1.2, llvmorg-18.1.1, llvmorg-18.1.0, llvmorg-18.1.0-rc4, llvmorg-18.1.0-rc3 |
|
| #
b5a273a1 |
| 09-Feb-2024 |
Stephen Tozer <stephen.tozer@sony.com> |
[Polly][DebugInfo] Use getStableDebugLoc to avoid intrinsic-dependent behaviour (#81246)
Polly currently uses `getDebugLoc` in a few places to produce diagnostic
output; this is correct when intera
[Polly][DebugInfo] Use getStableDebugLoc to avoid intrinsic-dependent behaviour (#81246)
Polly currently uses `getDebugLoc` in a few places to produce diagnostic
output; this is correct when interacting with specific instructions, but
may be incorrect when dealing with instruction ranges if debug
intrinsics are included. As a general rule, the debug locations attached
to debug intrinsics may be misleading compared to the surrounding
instructions, and are not generally used for anything other than
determining variable scope info; the recommended approach is therefore
to use `getStableDebugLoc` instead, which skips over debug intrinsics.
This is necessary to fix test failures that occur when enabling
non-instruction debug info, which removes debug intrinsics from basic
blocks and thus alters the diagnostic output of Polly (despite causing
no functional change).
show more ...
|
|
Revision tags: llvmorg-18.1.0-rc2, llvmorg-18.1.0-rc1, llvmorg-19-init, llvmorg-17.0.6, llvmorg-17.0.5, llvmorg-17.0.4, llvmorg-17.0.3, llvmorg-17.0.2, llvmorg-17.0.1, llvmorg-17.0.0, llvmorg-17.0.0-rc4, llvmorg-17.0.0-rc3, llvmorg-17.0.0-rc2, llvmorg-17.0.0-rc1, llvmorg-18-init, llvmorg-16.0.6, llvmorg-16.0.5, llvmorg-16.0.4, llvmorg-16.0.3, llvmorg-16.0.2, llvmorg-16.0.1, llvmorg-16.0.0, llvmorg-16.0.0-rc4, llvmorg-16.0.0-rc3, llvmorg-16.0.0-rc2, llvmorg-16.0.0-rc1, llvmorg-17-init, llvmorg-15.0.7, llvmorg-15.0.6, llvmorg-15.0.5, llvmorg-15.0.4, llvmorg-15.0.3, working, llvmorg-15.0.2, llvmorg-15.0.1, llvmorg-15.0.0, llvmorg-15.0.0-rc3, llvmorg-15.0.0-rc2, llvmorg-15.0.0-rc1, llvmorg-16-init, llvmorg-14.0.6, llvmorg-14.0.5, llvmorg-14.0.4, llvmorg-14.0.3, llvmorg-14.0.2, llvmorg-14.0.1, llvmorg-14.0.0, llvmorg-14.0.0-rc4, llvmorg-14.0.0-rc3, llvmorg-14.0.0-rc2, llvmorg-14.0.0-rc1, llvmorg-15-init, llvmorg-13.0.1, llvmorg-13.0.1-rc3, llvmorg-13.0.1-rc2, llvmorg-13.0.1-rc1, llvmorg-13.0.0, llvmorg-13.0.0-rc4, llvmorg-13.0.0-rc3, llvmorg-13.0.0-rc2, llvmorg-13.0.0-rc1, llvmorg-14-init, llvmorg-12.0.1, llvmorg-12.0.1-rc4, llvmorg-12.0.1-rc3, llvmorg-12.0.1-rc2, llvmorg-12.0.1-rc1, llvmorg-12.0.0, llvmorg-12.0.0-rc5, llvmorg-12.0.0-rc4, llvmorg-12.0.0-rc3, llvmorg-12.0.0-rc2, llvmorg-11.1.0, llvmorg-11.1.0-rc3, llvmorg-12.0.0-rc1, llvmorg-13-init, llvmorg-11.1.0-rc2, llvmorg-11.1.0-rc1, llvmorg-11.0.1, llvmorg-11.0.1-rc2, llvmorg-11.0.1-rc1, llvmorg-11.0.0, llvmorg-11.0.0-rc6, llvmorg-11.0.0-rc5, llvmorg-11.0.0-rc4, llvmorg-11.0.0-rc3, llvmorg-11.0.0-rc2, llvmorg-11.0.0-rc1, llvmorg-12-init, llvmorg-10.0.1, llvmorg-10.0.1-rc4, llvmorg-10.0.1-rc3, llvmorg-10.0.1-rc2, llvmorg-10.0.1-rc1, llvmorg-10.0.0, llvmorg-10.0.0-rc6, llvmorg-10.0.0-rc5, llvmorg-10.0.0-rc4, llvmorg-10.0.0-rc3, llvmorg-10.0.0-rc2, llvmorg-10.0.0-rc1 |
|
| #
0257a921 |
| 29-Jan-2020 |
Eli Friedman <efriedma@quicinc.com> |
Fix polly build after StringRef change.
|
|
Revision tags: llvmorg-11-init, llvmorg-9.0.1, llvmorg-9.0.1-rc3, llvmorg-9.0.1-rc2, llvmorg-9.0.1-rc1, llvmorg-9.0.0, llvmorg-9.0.0-rc6, llvmorg-9.0.0-rc5, llvmorg-9.0.0-rc4, llvmorg-9.0.0-rc3, llvmorg-9.0.0-rc2, llvmorg-9.0.0-rc1, llvmorg-10-init, llvmorg-8.0.1, llvmorg-8.0.1-rc4, llvmorg-8.0.1-rc3, llvmorg-8.0.1-rc2, llvmorg-8.0.1-rc1 |
|
| #
031bb165 |
| 28-Mar-2019 |
Michael Kruse <llvm@meinersbur.de> |
Apply include-what-you-use #include removal suggestions. NFC.
This removes unused includes (and forward declarations) as
suggested by include-what-you-use. If a transitive include of a removed
inclu
Apply include-what-you-use #include removal suggestions. NFC.
This removes unused includes (and forward declarations) as
suggested by include-what-you-use. If a transitive include of a removed
include is required to compile a file, I added the required header (or
forward declaration if suggested by include-what-you-use).
This should reduce compilation time and reduce the number of iterative
recompilations when a header was changed.
llvm-svn: 357209
show more ...
|
|
Revision tags: llvmorg-8.0.0, llvmorg-8.0.0-rc5, llvmorg-8.0.0-rc4, llvmorg-8.0.0-rc3, llvmorg-7.1.0, llvmorg-7.1.0-rc1, llvmorg-8.0.0-rc2, llvmorg-8.0.0-rc1 |
|
| #
2946cd70 |
| 19-Jan-2019 |
Chandler Carruth <chandlerc@gmail.com> |
Update the file headers across all of the LLVM projects in the monorepo
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the ne
Update the file headers across all of the LLVM projects in the monorepo
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
show more ...
|
|
Revision tags: llvmorg-7.0.1, llvmorg-7.0.1-rc3, llvmorg-7.0.1-rc2, llvmorg-7.0.1-rc1, llvmorg-7.0.0, llvmorg-7.0.0-rc3, llvmorg-7.0.0-rc2, llvmorg-7.0.0-rc1, llvmorg-6.0.1, llvmorg-6.0.1-rc3, llvmorg-6.0.1-rc2, llvmorg-6.0.1-rc1, llvmorg-5.0.2, llvmorg-5.0.2-rc2, llvmorg-5.0.2-rc1, llvmorg-6.0.0, llvmorg-6.0.0-rc3, llvmorg-6.0.0-rc2, llvmorg-6.0.0-rc1, llvmorg-5.0.1, llvmorg-5.0.1-rc3, llvmorg-5.0.1-rc2, llvmorg-5.0.1-rc1, llvmorg-5.0.0, llvmorg-5.0.0-rc5, llvmorg-5.0.0-rc4, llvmorg-5.0.0-rc3, llvmorg-5.0.0-rc2, llvmorg-5.0.0-rc1, llvmorg-4.0.1, llvmorg-4.0.1-rc3, llvmorg-4.0.1-rc2, llvmorg-4.0.1-rc1, llvmorg-4.0.0, llvmorg-4.0.0-rc4, llvmorg-4.0.0-rc3, llvmorg-4.0.0-rc2, llvmorg-4.0.0-rc1, llvmorg-3.9.1, llvmorg-3.9.1-rc3, llvmorg-3.9.1-rc2, llvmorg-3.9.1-rc1, llvmorg-3.9.0, llvmorg-3.9.0-rc3, llvmorg-3.9.0-rc2, llvmorg-3.9.0-rc1 |
|
| #
522478d2 |
| 23-Jun-2016 |
Tobias Grosser <tobias@grosser.es> |
clang-tidy: Add llvm namespace comments
llvm commonly adds a comment to the closing brace of a namespace to indicate
which namespace is closed. clang-tidy provides with llvm-namespace-comment
a hand
clang-tidy: Add llvm namespace comments
llvm commonly adds a comment to the closing brace of a namespace to indicate
which namespace is closed. clang-tidy provides with llvm-namespace-comment
a handy tool to check for this habit. We use it to ensure we consitently use
namespace comments in Polly.
There are slightly different styles in how namespaces are closed in LLVM. As
there is no large difference between the different comment styles we go for the
style clang-tidy suggests by default.
To reproduce this fix run:
for i in `ls tools/polly/lib/*/*.cpp`; \
clang-tidy -checks='-*,llvm-namespace-comment' -p build $i -fix \
-header-filter=".*"; \
done
This cleanup was suggested by Eugene Zelenko <eugene.zelenko@gmail.com> in
http://reviews.llvm.org/D21488 and was split out to increase readability.
llvm-svn: 273621
show more ...
|
|
Revision tags: llvmorg-3.8.1, llvmorg-3.8.1-rc1, llvmorg-3.8.0, llvmorg-3.8.0-rc3, llvmorg-3.8.0-rc2, llvmorg-3.8.0-rc1, llvmorg-3.7.1, llvmorg-3.7.1-rc2, llvmorg-3.7.1-rc1, llvmorg-3.7.0, llvmorg-3.7.0-rc4, llvmorg-3.7.0-rc3, studio-1.4, llvmorg-3.7.0-rc2, llvmorg-3.7.0-rc1, llvmorg-3.6.2, llvmorg-3.6.2-rc1, llvmorg-3.6.1, llvmorg-3.6.1-rc1 |
|
| #
ba0d0922 |
| 09-May-2015 |
Tobias Grosser <tobias@grosser.es> |
Sort include directives
Upcoming revisions of isl require us to include header files explicitly, which
have previously been already transitively included. Before we add them, we sort
the existing in
Sort include directives
Upcoming revisions of isl require us to include header files explicitly, which
have previously been already transitively included. Before we add them, we sort
the existing includes.
Thanks to Chandler for sort_includes.py. A simple, but very convenient script.
llvm-svn: 236930
show more ...
|
| #
a63b7cee |
| 03-May-2015 |
Tobias Grosser <tobias@grosser.es> |
Adding debug location information to Polly's JSCOP and dot exports
This change adds location information for the detected regions in Polly when the
required debug information is available.
The JSCO
Adding debug location information to Polly's JSCOP and dot exports
This change adds location information for the detected regions in Polly when the
required debug information is available.
The JSCOP output format is extended with a "location" field which contains the
information in the format "source.c:start-end"
The dot output is extended to contain the location information for each nested
region in the analyzed function.
As part of this change, the existing getDebugLocation function has been moved
into lib/Support/ScopLocation.cpp to avoid having to include
polly/ScopDetectionDiagnostics.h.
Differential Revision: http://reviews.llvm.org/D9431
Contributed-by: Roal Jordans <r.jordans@tue.nl>
llvm-svn: 236393
show more ...
|