[RemoveDIs] Handle DPValues in FastISel (#76952)

The change is fairly mechanical:
1. Factor code from `FastISel::selectIntrinsicCall`, which converts
debug intrinsics into debug instructions, into

[RemoveDIs] Handle DPValues in FastISel (#76952)

The change is fairly mechanical:
1. Factor code from `FastISel::selectIntrinsicCall`, which converts
debug intrinsics into debug instructions, into functions (NFC).
2. Call those functions for DPValues attached to instructions too.

The test updates look the same as other RemoveDIs changes: re-run the
tests with `--try-experimental-debuginfo-iterators`, which checks the
output is identical using the new debug info format (if it has been
enabled in the cmake configuration).

Depends on #76941 (otherwise some modified tests spuriously fail).

show more ...

[DebugInfo] Convert most tests to opaque pointers (NFC)

[AIX] Bump DWARF versions to 3 because XCOFF64 requires DWARF64

DWARF64 was implemented at version 3, so if a DWARF version less than 3 is specified, DWARF64 does not get selected. Since XCOFF64 req

[AIX] Bump DWARF versions to 3 because XCOFF64 requires DWARF64

DWARF64 was implemented at version 3, so if a DWARF version less than 3 is specified, DWARF64 does not get selected. Since XCOFF64 requires DWARF64, the modified tests fail on 64-bit AIX. This patch bumps these tests to dwarf version 3 to maintain test coverage on 64-bit AIX.

Reviewed By: dblaikie

Differential Revision: https://reviews.llvm.org/D114110

show more ...

Revert "[DwarfDebug] Support emitting function-local declaration for a lexical block" & dependent patches

Try to revert D113741 once again.

This also reverts 0ac75e82fff93a80ca401d3db3541e8d1d9098f

Revert "[DwarfDebug] Support emitting function-local declaration for a lexical block" & dependent patches

Try to revert D113741 once again.

This also reverts 0ac75e82fff93a80ca401d3db3541e8d1d9098f9 (D114705)
as it causes LLDB's lldb-api.lang/cpp/nsimport.TestCppNsImport.py test
failure w/o D113741.

This reverts commit f9607d45f399e2afc39ec16222ea68b4e0831564.

Differential Revision: https://reviews.llvm.org/D116225

show more ...

Reland [DwarfDebug] Move emission of global vars, types and imports to endModule()

This patch proposes to move emission of global variables, types,
imported entities, etc from DwarfDebug::beginModul

Reland [DwarfDebug] Move emission of global vars, types and imports to endModule()

This patch proposes to move emission of global variables, types,
imported entities, etc from DwarfDebug::beginModule() to DwarfDebug::endModule().
Effectively, this changes nothing but the order of debug entities which
will be as follows:
* subprograms (including related context, local variables/labels,
local imported entities; related types can be created as a part of
the emission of local entities of an abstract subprogram);
* global variables (including related context and types);
* retained types and enums;
* non-local-scoped imported entities;
* basic types;
* other types left (as a part of local variables attributes emission).

Note that the order of emitted compile units may also be changed as now we emit
units that contain subprograms first and then all other non-empty units.

The motivation behind this change is the following:
(1) DwarfDebug::beginModule() is run at the very beginning of backend's pipeline,
from this time IR can be significantly changed by target-specific passes.
If it happens for debug metadata of global entities, those changes will not
be reflected in the emitted DWARF.
(2) imported subprogram names should refer to an abstract subprogram if it exists,
but it isn't known in DwarfDebug::beginModule() (it's possible to make some
guesses based on location info, but it's not quite reliable);
(3) aforementioned entities if they are scoped within a bracketed block
(subject of D113741) couldn't be emitted in DwarfDebug::beginModule()
(they need parent emitted first). Another problem is if to try to gather
some information about local entities and defer their emission
(till subprogram's processing or DwarfDebug::endModule()) all the gathered
details might be irrelevant / invalid by the time the entities are being
emitted (because of (1)).

Reviewed By: dblaikie

Differential Revision: https://reviews.llvm.org/D114705

show more ...

Revert "[DwarfDebug] Support emitting function-local declaration for a lexical block"

This reverts commits
* ee691970a9a85470948ada623c31f0ab8773617c (D113741),
* 79d3132998b2828be8f7d2ec411f91fb11b

Revert "[DwarfDebug] Support emitting function-local declaration for a lexical block"

This reverts commits
* ee691970a9a85470948ada623c31f0ab8773617c (D113741),
* 79d3132998b2828be8f7d2ec411f91fb11b3e01f (D114705)

due to lldb and dexter test failures.

show more ...

[DwarfDebug] Move emission of global vars, types and imports to endModule()

This patch proposes to move emission of global variables, types,
imported entities, etc from DwarfDebug::beginModule() to

[DwarfDebug] Move emission of global vars, types and imports to endModule()

This patch proposes to move emission of global variables, types,
imported entities, etc from DwarfDebug::beginModule() to DwarfDebug::endModule().
Effectively, this changes nothing but the order of debug entities which
will be as follows:
* subprograms (including related context, local variables/labels,
local imported entities; related types can be created as a part of
the emission of local entities of an abstract subprogram);
* global variables (including related context and types);
* retained types and enums;
* non-local-scoped imported entities;
* basic types;
* other types left (as a part of local variables attributes emission).

Note that the order of emitted compile units may also be changed as now we emit
units that contain subprograms first and then all other non-empty units.

The motivation behind this change is the following:
(1) DwarfDebug::beginModule() is run at the very beginning of backend's pipeline,
from this time IR can be significantly changed by target-specific passes.
If it happens for debug metadata of global entities, those changes will not
be reflected in the emitted DWARF.
(2) imported subprogram names should refer to an abstract subprogram if it exists,
but it isn't known in DwarfDebug::beginModule() (it's possible to make some
guesses based on location info, but it's not quite reliable);
(3) aforementioned entities if they are scoped within a bracketed block
(subject of D113741) couldn't be emitted in DwarfDebug::beginModule()
(they need parent emitted first). Another problem is if to try to gather
some information about local entities and defer their emission
(till subprogram's processing or DwarfDebug::endModule()) all the gathered
details might be irrelevant / invalid by the time the entities are being
emitted (because of (1)).

Reviewed By: dblaikie

Differential Revision: https://reviews.llvm.org/D114705

show more ...

[DWARF] Standardize checks and remove verbose where possible in DWARF tests

This patch removes the verbose option from tests that do not need it and simplifies the checks. For tests that do have the

[DWARF] Standardize checks and remove verbose where possible in DWARF tests

This patch removes the verbose option from tests that do not need it and simplifies the checks. For tests that do have the verbose option, the checks were standardized to be more readable and consistent.

Reviewed By: shchenz, dblaikie

Differential Revision: https://reviews.llvm.org/D112636

show more ...

Revert "[NFC] remove explicit default value for strboolattr attribute in tests"

This reverts commit bda6e5bee04c75b1f1332b4fd1ac4e8ef6c3c247.

See https://lab.llvm.org/buildbot/#/builders/109/builds

Revert "[NFC] remove explicit default value for strboolattr attribute in tests"

This reverts commit bda6e5bee04c75b1f1332b4fd1ac4e8ef6c3c247.

See https://lab.llvm.org/buildbot/#/builders/109/builds/15424 for instance

show more ...

[NFC] remove explicit default value for strboolattr attribute in tests

Since d6de1e1a71406c75a4ea4d5a2fe84289f07ea3a1, no attributes is quivalent to
setting attribute to false.

This is a preliminar

[NFC] remove explicit default value for strboolattr attribute in tests

Since d6de1e1a71406c75a4ea4d5a2fe84289f07ea3a1, no attributes is quivalent to
setting attribute to false.

This is a preliminary commit for https://reviews.llvm.org/D99080

show more ...

Remove lit feature object-emission

Summary: The lit feature object-emission was added because Hexagon did not support the integrated assembler, so some tests needed to be turned off with a Hexagon t

Remove lit feature object-emission

Summary: The lit feature object-emission was added because Hexagon did not support the integrated assembler, so some tests needed to be turned off with a Hexagon target. Hexagon now supports the integrated assembler, so this feature can be removed.

Reviewers: bcain, kparzysz, jverma, whitequark, JDevlieghere

Reviewed By: JDevlieghere

Subscribers: mehdi_amini, hiraditya, steven_wu, dexonsmith, arphaman, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D73568

show more ...

Migrate function attribute "no-frame-pointer-elim" to "frame-pointer"="all" as cleanups after D56351

[DebugInfo] Add DILabel metadata and intrinsic llvm.dbg.label.

In order to set breakpoints on labels and list source code around
labels, we need collect debug information for labels, i.e., label
nam

[DebugInfo] Add DILabel metadata and intrinsic llvm.dbg.label.

In order to set breakpoints on labels and list source code around
labels, we need collect debug information for labels, i.e., label
name, the function label belong, line number in the file, and the
address label located. In order to keep these information in LLVM
IR and to allow backend to generate debug information correctly.
We create a new kind of metadata for labels, DILabel. The format
of DILabel is

!DILabel(scope: !1, name: "foo", file: !2, line: 3)

We hope to keep debug information as much as possible even the
code is optimized. So, we create a new kind of intrinsic for label
metadata to avoid the metadata is eliminated with basic block.
The intrinsic will keep existing if we keep it from optimized out.
The format of the intrinsic is

llvm.dbg.label(metadata !1)

It has only one argument, that is the DILabel metadata. The
intrinsic will follow the label immediately. Backend could get the
label metadata through the intrinsic's parameter.

We also create DIBuilder API for labels to be used by Frontend.
Frontend could use createLabel() to allocate DILabel objects, and use
insertLabel() to insert llvm.dbg.label intrinsic in LLVM IR.

Differential Revision: https://reviews.llvm.org/D45024

Patch by Hsiangkai Wang.

llvm-svn: 331841

show more ...

Re-land "[llvm-dwarfdump] Print type names in DW_AT_type DIEs"

This patch adds printing for DW_AT_type DIEs like it is already the case
for DW_AT_specification DIEs. This is a rather naive approach

Re-land "[llvm-dwarfdump] Print type names in DW_AT_type DIEs"

This patch adds printing for DW_AT_type DIEs like it is already the case
for DW_AT_specification DIEs. This is a rather naive approach and only a
start. We should have pretty printers for different languages.

Recommit after being reverted in r315299.

Differential revision: https://reviews.llvm.org/D36993

llvm-svn: 315316

show more ...

Revert "[llvm-dwarfdump] Print type names in DW_AT_type DIEs"

This reverts commit r315297.

llvm-svn: 315299

[llvm-dwarfdump] Print type names in DW_AT_type DIEs

This patch adds printing for DW_AT_type DIEs like it is already the case
for DW_AT_specification DIEs. This is a rather naive approach and only a

[llvm-dwarfdump] Print type names in DW_AT_type DIEs

This patch adds printing for DW_AT_type DIEs like it is already the case
for DW_AT_specification DIEs. This is a rather naive approach and only a
start. We should have pretty printers for different languages.

Differential revision: https://reviews.llvm.org/D36993

llvm-svn: 315297

show more ...

llvm-dwarfdump: Make -brief the default and add a -verbose option instead.

Differential Revision: https://reviews.llvm.org/D37717

llvm-svn: 312972

llvm-dwarfdump: Replace -debug-dump=sect option with individual options.

As discussed on llvm-dev in
http://lists.llvm.org/pipermail/llvm-dev/2017-September/117301.html
this changes the command line

llvm-dwarfdump: Replace -debug-dump=sect option with individual options.

As discussed on llvm-dev in
http://lists.llvm.org/pipermail/llvm-dev/2017-September/117301.html
this changes the command line interface of llvm-dwarfdump to match the
one used by the dwarfdump utility shipping on macOS. In addition to
being shorter to type this format also has the advantage of allowing
more than one section to be specified at the same time.

In a nutshell, with this change

$ llvm-dwarfdump --debug-dump=info
$ llvm-dwarfdump --debug-dump=apple-objc

becomes

$ dwarfdump --debug-info --apple-objc

Differential Revision: https://reviews.llvm.org/D37714

llvm-svn: 312970

show more ...

DebugInfo: Remove MDString-based type references

Eliminate DITypeIdentifierMap and make DITypeRef a thin wrapper around
DIType*. It is no longer legal to refer to a DICompositeType by its
'identifi

DebugInfo: Remove MDString-based type references

Eliminate DITypeIdentifierMap and make DITypeRef a thin wrapper around
DIType*. It is no longer legal to refer to a DICompositeType by its
'identifier:', and DIBuilder no longer retains all types with an
'identifier:' automatically.

Aside from the bitcode upgrade, this is mainly removing logic to resolve
an MDString-based reference to an actualy DIType. The commits leading
up to this have made the implicit type map in DICompileUnit's
'retainedTypes:' field superfluous.

This does not remove DITypeRef, DIScopeRef, DINodeRef, and
DITypeRefArray, or stop using them in DI-related metadata. Although as
of this commit they aren't serving a useful purpose, there are patchces
under review to reuse them for CodeView support.

The tests in LLVM were updated with deref-typerefs.sh, which is attached
to the thread "[RFC] Lazy-loading of debug info metadata":

http://lists.llvm.org/pipermail/llvm-dev/2016-April/098318.html

llvm-svn: 267296

show more ...

[DWARF] Force a linkage_name on an inlined subprogram's abstract origin.

When we suppress linkage names, for a non-inlined subprogram the name
can still be found in the object-file symbol table, bec

[DWARF] Force a linkage_name on an inlined subprogram's abstract origin.

When we suppress linkage names, for a non-inlined subprogram the name
can still be found in the object-file symbol table, because we have
the code address of the subprogram. This is not necessarily the case
for an inlined subprogram, so we still want to emit the linkage name
in the DWARF. Put this on the abstract-origin DIE because it's common
to all inlined instances.

Differential Revision: http://reviews.llvm.org/D18706

llvm-svn: 266692

show more ...

[PR27284] Reverse the ownership between DICompileUnit and DISubprogram.

Currently each Function points to a DISubprogram and DISubprogram has a
scope field. For member functions the scope is a DICom

[PR27284] Reverse the ownership between DICompileUnit and DISubprogram.

Currently each Function points to a DISubprogram and DISubprogram has a
scope field. For member functions the scope is a DICompositeType. DIScopes
point to the DICompileUnit to facilitate type uniquing.

Distinct DISubprograms (with isDefinition: true) are not part of the type
hierarchy and cannot be uniqued. This change removes the subprograms
list from DICompileUnit and instead adds a pointer to the owning compile
unit to distinct DISubprograms. This would make it easy for ThinLTO to
strip unneeded DISubprograms and their transitively referenced debug info.

Motivation
----------

Materializing DISubprograms is currently the most expensive operation when
doing a ThinLTO build of clang.

We want the DISubprogram to be stored in a separate Bitcode block (or the
same block as the function body) so we can avoid having to expensively
deserialize all DISubprograms together with the global metadata. If a
function has been inlined into another subprogram we need to store a
reference the block containing the inlined subprogram.

Attached to https://llvm.org/bugs/show_bug.cgi?id=27284 is a python script
that updates LLVM IR testcases to the new format.

http://reviews.llvm.org/D19034
<rdar://problem/25256815>

llvm-svn: 266446

show more ...

testcase gardening: update the emissionKind enum to the new syntax. (NFC)

llvm-svn: 265081

DI: Reverse direction of subprogram -> function edge.

Previously, subprograms contained a metadata reference to the function they
described. Because most clients need to get or set a subprogram for

DI: Reverse direction of subprogram -> function edge.

Previously, subprograms contained a metadata reference to the function they
described. Because most clients need to get or set a subprogram for a given
function rather than the other way around, this created unneeded inefficiency.

For example, many passes needed to call the function llvm::makeSubprogramMap()
to build a mapping from functions to subprograms, and the IR linker needed to
fix up function references in a way that caused quadratic complexity in the IR
linking phase of LTO.

This change reverses the direction of the edge by storing the subprogram as
function-level metadata and removing DISubprogram's function field.

Since this is an IR change, a bitcode upgrade has been provided.

Fixes PR23367. An upgrade script for textual IR for out-of-tree clients is
attached to the PR.

Differential Revision: http://reviews.llvm.org/D14265

llvm-svn: 252219

show more ...

Make the default triple optional by allowing an empty string

When building LLVM as a (potentially dynamic) library that can be linked against
by multiple compilers, the default triple is not really

Make the default triple optional by allowing an empty string

When building LLVM as a (potentially dynamic) library that can be linked against
by multiple compilers, the default triple is not really meaningful.
We allow to explicitely set it to an empty string when configuring LLVM.
In this case, said "target independent" tests in the test suite that are using
the default triple are disabled by matching the newly available feature
"default_triple".

Reviewers: probinson, echristo
Differential Revision: http://reviews.llvm.org/D12660

From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 247775

show more ...