[AMDGPU] Occupancy w.r.t. workgroup size range is also a range (#123748)

Occupancy (i.e., the number of waves per EU) depends, in addition to
register usage, on per-workgroup LDS usage as well as on

[AMDGPU] Occupancy w.r.t. workgroup size range is also a range (#123748)

Occupancy (i.e., the number of waves per EU) depends, in addition to
register usage, on per-workgroup LDS usage as well as on the range of
possible workgroup sizes. Mirroring the latter, occupancy should
therefore be expressed as a range since different group sizes generally
yield different achievable occupancies.

`getOccupancyWithLocalMemSize` currently returns a scalar occupancy
based on the maximum workgroup size and LDS usage. With respect to the
workgroup size range, this scalar can be the minimum, the maximum, or
neither of the two of the range of achievable occupancies. This commit
fixes the function by making it compute and return the range of
achievable occupancies w.r.t. workgroup size and LDS usage; it also
renames it to `getOccupancyWithWorkGroupSizes` since it is the range of
workgroup sizes that produces the range of achievable occupancies.

Computing the achievable occupancy range is surprisingly involved.
Minimum/maximum workgroup sizes do not necessarily yield maximum/minimum
occupancies i.e., sometimes workgroup sizes inside the range yield the
occupancy bounds. The implementation finds these sizes in constant time;
heavy documentation explains the rationale behind the sometimes
relatively obscure calculations.

As a justifying example, consider a target with 10 waves / EU, 4 EUs/CU,
64-wide waves. Also consider a function with no LDS usage and a flat
workgroup size range of [513,1024].

- A group of 513 items requires 9 waves per group. Only 4 groups made up
of 9 waves each can fit fully on a CU at any given time, for a total of
36 waves on the CU, or 9 per EU. However, filling as much as possible
the remaining 40-36=4 wave slots without decreasing the number of groups
reveals that a larger group of 640 items yields 40 waves on the CU, or
10 per EU.
- Similarly, a group of 1024 items requires 16 waves per group. Only 2
groups made up of 16 waves each can fit fully on a CU ay any given time,
for a total of 32 waves on the CU, or 8 per EU. However, removing as
many waves as possible from the groups without being able to fit another
equal-sized group on the CU reveals that a smaller group of 896 items
yields 28 waves on the CU, or 7 per EU.

Therefore the achievable occupancy range for this function is not [8,9]
as the group size bounds directly yield, but [7,10].

Naturally this change causes a lot of test churn as instruction
scheduling is driven by achievable occupancy estimates. In most unit
tests the flat workgroup size range is the default [1,1024] which,
ignoring potential LDS limitations, would previously produce a scalar
occupancy of 8 (derived from 1024) on a lot of targets, whereas we now
consider the maximum occupancy to be 10 in such cases. Most tests are
updated automatically and checked manually for sanity. I also manually
changed some non-automatically generated assertions when necessary.

Fixes #118220.

show more ...

Reapply "[AMDGPU] Still set up the two SGPRs for queue ptr even it is COV5 (#112403)"

This reverts commit ca33649abe5fad93c57afef54e43ed9b3249cd86.

Revert "[AMDGPU] Still set up the two SGPRs for queue ptr even it is COV5 (#112403)"

This reverts commit e215a1e27d84adad2635a52393621eb4fa439dc9 as it broke both
hip and openmp buildbots.

[AMDGPU] Still set up the two SGPRs for queue ptr even it is COV5 (#112403)

[AMDGPU] Skip VGPR deallocation for waveslot limited kernels (#112765)

MSG_DEALLOC_VGPRS slows down very small waveslot limited kernels. It's
been identified this message is only really needed for

[AMDGPU] Skip VGPR deallocation for waveslot limited kernels (#112765)

MSG_DEALLOC_VGPRS slows down very small waveslot limited kernels. It's
been identified this message is only really needed for VGPR limited
kernels. A kernel becomes VGPR limited if a total number of VGPRs per
SIMD / number of used VGPRs is more than a number of wave slots.

show more ...

[AMDGPU] Promote uniform ops to I32 in DAGISel (#106383)

Promote uniform binops, selects and setcc between 2 and 16 bits to 32
bits in DAGISel

Solves #64591

[AMDGPU] Codegen support for constrained multi-dword sloads (#96163)

For targets that support xnack replay feature (gfx8+), the
multi-dword scalar loads shouldn't clobber any register that
holds the

[AMDGPU] Codegen support for constrained multi-dword sloads (#96163)

For targets that support xnack replay feature (gfx8+), the
multi-dword scalar loads shouldn't clobber any register that
holds the src address. The constrained version of the scalar
loads have the early clobber flag attached to the dst operand
to restrict RA from re-allocating any of the src regs for its
dst operand.

show more ...

Reapply "AMDGPU: Move attributor into optimization pipeline (#83131)" and follow up commit "clang/AMDGPU: Defeat attribute optimization in attribute test" (#98851)

This reverts commit adaff46d087799

Reapply "AMDGPU: Move attributor into optimization pipeline (#83131)" and follow up commit "clang/AMDGPU: Defeat attribute optimization in attribute test" (#98851)

This reverts commit adaff46d087799072438dd744b038e6fd50a2d78.

Drop the -O3 checks from default-attributes.hip. I don't know why they
are different on some bots but reverting this is far too disruptive.

show more ...

Revert "AMDGPU: Move attributor into optimization pipeline (#83131)" and follow up commit "clang/AMDGPU: Defeat attribute optimization in attribute test" (#98851)

This reverts commits 677cc15e0ff2e0

Revert "AMDGPU: Move attributor into optimization pipeline (#83131)" and follow up commit "clang/AMDGPU: Defeat attribute optimization in attribute test" (#98851)

This reverts commits 677cc15e0ff2e0e6aa30538eb187990a6a8f53c0 and
78bc1b64a6dc3fb6191355a5e1b502be8b3668e7.

The test CodeGenHIP/default-attributes.hip is failing on multiple bots
even after the attempted fix including the following:
- https://lab.llvm.org/buildbot/#/builders/3/builds/1473
- https://lab.llvm.org/buildbot/#/builders/65/builds/1380
- https://lab.llvm.org/buildbot/#/builders/161/builds/595
- https://lab.llvm.org/buildbot/#/builders/154/builds/1372
- https://lab.llvm.org/buildbot/#/builders/133/builds/1547
- https://lab.llvm.org/buildbot/#/builders/81/builds/755
- https://lab.llvm.org/buildbot/#/builders/40/builds/570
- https://lab.llvm.org/buildbot/#/builders/13/builds/748
- https://lab.llvm.org/buildbot/#/builders/12/builds/1845
- https://lab.llvm.org/buildbot/#/builders/11/builds/1695
- https://lab.llvm.org/buildbot/#/builders/190/builds/1829
- https://lab.llvm.org/buildbot/#/builders/193/builds/962
- https://lab.llvm.org/buildbot/#/builders/23/builds/991
- https://lab.llvm.org/buildbot/#/builders/144/builds/2256
- https://lab.llvm.org/buildbot/#/builders/46/builds/1614

These bots have been broken for a day, so reverting to get everything
back to green.

show more ...

AMDGPU: Move attributor into optimization pipeline (#83131)

Removing it from the codegen pipeline induces a lot of test churn
because llc is no longer optimizing out implicit arguments to kernels.

AMDGPU: Move attributor into optimization pipeline (#83131)

Removing it from the codegen pipeline induces a lot of test churn
because llc is no longer optimizing out implicit arguments to kernels.

Mostly mechanical, but there are some creative test updates. I preferred
to take the changes as-is in tests where the ABI isn't relevant. In
cases where it's more relevant, or the optimize out logic was too
ingrained in the test, I pre-run the optimization. Some cases manually
add attributes to disable inputs.

show more ...

[SelectionDAG] Switch to LiveRegUnits (#84197)

[AMDGPU] CodeGen for GFX12 S_WAIT_* instructions (#77438)

Update SIMemoryLegalizer and SIInsertWaitcnts to use separate wait
instructions per counter (e.g. S_WAIT_LOADCNT) and split VMCNT into
sep

[AMDGPU] CodeGen for GFX12 S_WAIT_* instructions (#77438)

Update SIMemoryLegalizer and SIInsertWaitcnts to use separate wait
instructions per counter (e.g. S_WAIT_LOADCNT) and split VMCNT into
separate LOADCNT, SAMPLECNT and BVHCNT counters.

show more ...

[AMDGPU] Disable V_MAD_U64_U32/V_MAD_I64_I32 workaround for GFX12 (#77927)

[AMDGPU,test] Change llc -march= to -mtriple= (#75982)

Similar to 806761a7629df268c8aed49657aeccffa6bca449.

For IR files without a target triple, -mtriple= specifies the full
target triple while

[AMDGPU,test] Change llc -march= to -mtriple= (#75982)

Similar to 806761a7629df268c8aed49657aeccffa6bca449.

For IR files without a target triple, -mtriple= specifies the full
target triple while -march= merely sets the architecture part of the
default target triple, leaving a target triple which may not make sense,
e.g. amdgpu-apple-darwin.

Therefore, -march= is error-prone and not recommended for tests without
a target triple. The issue has been benign as we recognize
$unknown-apple-darwin as ELF instead of rejecting it outrightly.

This patch changes AMDGPU tests to not rely on the default
OS/environment components. Tests that need fixes are not changed:

```
LLVM :: CodeGen/AMDGPU/fabs.f64.ll
LLVM :: CodeGen/AMDGPU/fabs.ll
LLVM :: CodeGen/AMDGPU/floor.ll
LLVM :: CodeGen/AMDGPU/fneg-fabs.f64.ll
LLVM :: CodeGen/AMDGPU/fneg-fabs.ll
LLVM :: CodeGen/AMDGPU/r600-infinite-loop-bug-while-reorganizing-vector.ll
LLVM :: CodeGen/AMDGPU/schedule-if-2.ll
```

show more ...

[AMDGPU] Add CodeGen support for GFX12 s_mul_u64 (#75825)

[AMDGPU] Enable GCNRewritePartialRegUses pass by default. (#72975)

Let's try once again after #69957 has landed.

[AMDGPU] Select v_lshl_add_u32 instead of v_mul_lo_u32 by constant (#71035)

Instead of: v_mul_lo_u32 v0, v0, 5 we should generate: v_lshl_add_u32
v0, v0, 2, v0.

[AMDGPU] Add i1 mul patterns (#67291)

i1 muls can sometimes happen after SCEV. They resulted in ISel failures
because we were missing the patterns for them.

Solves SWDEV-423354

Revert "[CodeGen] Really renumber slot indexes before register allocation (#67038)"

This reverts commit 2501ae58e3bb9a70d279a56d7b3a0ed70a8a852c.

Reverted due to various buildbot failures.

[CodeGen] Really renumber slot indexes before register allocation (#67038)

PR #66334 tried to renumber slot indexes before register allocation, but
the numbering was still affected by list entries

[CodeGen] Really renumber slot indexes before register allocation (#67038)

PR #66334 tried to renumber slot indexes before register allocation, but
the numbering was still affected by list entries for instructions which
had been erased. Fix this to make the register allocator's live range
length heuristics even less dependent on the history of how instructions
have been added to and removed from SlotIndexes's maps.

show more ...

[CodeGen] Renumber slot indexes before register allocation (#66334)

RegAllocGreedy uses SlotIndexes::getApproxInstrDistance to approximate
the length of a live range for its heuristics. Renumbering

[CodeGen] Renumber slot indexes before register allocation (#66334)

RegAllocGreedy uses SlotIndexes::getApproxInstrDistance to approximate
the length of a live range for its heuristics. Renumbering all slot
indexes with the default instruction distance ensures that this estimate
will be as accurate as possible, and will not depend on the history of
how instructions have been added to and removed from SlotIndexes's maps.

This also means that enabling -early-live-intervals, which runs the
SlotIndexes analysis earlier, will not cause large amounts of churn due
to different register allocator decisions.

show more ...

[AMDGPU] Insert s_nop before s_sendmsg sendmsg(MSG_DEALLOC_VGPRS)

Differential Revision: https://reviews.llvm.org/D155681

[AMDGPU] Turn off pass to rewrite partially used virtual superregisters after RenameIndependentSubregs pass with registers of minimal size.

There is a failure with this pass in the case when target

[AMDGPU] Turn off pass to rewrite partially used virtual superregisters after RenameIndependentSubregs pass with registers of minimal size.

There is a failure with this pass in the case when target register class for a subregister isn't known from instruction description (for ex. COPY).
Currently in this situation the RC is obtained using TargetRegisterInfo::getSubRegisterClass but in general it's not working.

In order to fix this two things should be done:
1. Stop processing a subregister if the target register class is unknown (conservative approach)
2. Improve deduction of subregister' target register class (i.e by processing COPY chain)

I was going to implement point 1 but my tests use implicit operands for S_NOP and they don't have associated target register class and all tests fail.
Therefore I decided to turn off the pass now, implement point 1 and fix my tests.

Reviewed By: arsenm, #amdgpu

Differential Revision: https://reviews.llvm.org/D152291

show more ...

[AMDGPU] Add pass to rewrite partially used virtual superregisters after RenameIndependentSubregs pass with registers of minimal size.

The main purpose of this is to simplify register pressure track

[AMDGPU] Add pass to rewrite partially used virtual superregisters after RenameIndependentSubregs pass with registers of minimal size.

The main purpose of this is to simplify register pressure tracking as after the pass there is no need
to track subreg liveness anymore.

On the other hand this pass creates more possibilites for the subreg unaware code, as many of the subregs
becomes ordinary registers.

Intersting sideeffect: spill-vgpr.ll has lost a lot of spills.

Reviewed By: #amdgpu, arsenm

Differential Revision: https://reviews.llvm.org/D139732

show more ...

[AMDGPU] Introduce SIInstrWorklist to process instructions in moveToVALU

Reviewed By: arsenm

Differential Revision: https://reviews.llvm.org/D147168