[lldb] Rename Logging.h to LLDBLog.h and clean up includes

Most of our code was including Log.h even though that is not where the
"lldb" log channel is defined (Log.h defines the generic logging
inf

[lldb] Rename Logging.h to LLDBLog.h and clean up includes

Most of our code was including Log.h even though that is not where the
"lldb" log channel is defined (Log.h defines the generic logging
infrastructure). This worked because Log.h included Logging.h, even
though it should.

After the recent refactor, it became impossible the two files include
each other in this direction (the opposite inclusion is needed), so this
patch removes the workaround that was put in place and cleans up all
files to include the right thing. It also renames the file to LLDBLog to
better reflect its purpose.

show more ...

[lldb] Convert "LLDB" log channel to the new API

[lldb] Remove very old misleading comment (NFC)

Make ThreadPlans use TID and Process, rather than Thread *.

Differential Revision: https://reviews.llvm.org/D75711

[lldb][NFC] Fix all formatting errors in .cpp file headers

Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp ----------------------------------------

[lldb][NFC] Fix all formatting errors in .cpp file headers

Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp -------------------------------------------------===//
```
However in LLDB most of our source files have arbitrary changes to this format and
these changes are spreading through LLDB as folks usually just use the existing
source files as templates for their new files (most notably the unnecessary
editor language indicator `-*- C++ -*-` is spreading and in every review
someone is pointing out that this is wrong, resulting in people pointing out that this
is done in the same way in other files).

This patch removes most of these inconsistencies including the editor language indicators,
all the different missing/additional '-' characters, files that center the file name, missing
trailing `===//` (mostly caused by clang-format breaking the line).

Reviewers: aprantl, espindola, jfb, shafik, JDevlieghere

Reviewed By: JDevlieghere

Subscribers: dexonsmith, wuzish, emaste, sdardis, nemanjai, kbarton, MaskRay, atanasyan, arphaman, jfb, abidh, jsji, JDevlieghere, usaxena95, lldb-commits

Tags: #lldb

Differential Revision: https://reviews.llvm.org/D73258

show more ...

[lldb][NFC] Move Address and AddressRange functions out of Stream and let them take raw_ostream

Summary:
Yet another step on the long road towards getting rid of lldb's Stream class.

We probably sh

[lldb][NFC] Move Address and AddressRange functions out of Stream and let them take raw_ostream

Summary:
Yet another step on the long road towards getting rid of lldb's Stream class.

We probably should just make this some kind of member of Address/AddressRange, but it seems quite often we just push
in random integers in there and this is just about getting rid of Stream and not improving arbitrary APIs.

I had to rename another `DumpAddress` function in FormatEntity that is dumping the content of an address to make Clang happy.

Reviewers: labath

Reviewed By: labath

Subscribers: JDevlieghere, lldb-commits

Tags: #lldb

Differential Revision: https://reviews.llvm.org/D71052

show more ...

[Logging] Replace Log::Printf with LLDB_LOG macro (NFC)

This patch replaces explicit calls to log::Printf with the new LLDB_LOGF
macro. The macro is similar to LLDB_LOG but supports printf-style for

[Logging] Replace Log::Printf with LLDB_LOG macro (NFC)

This patch replaces explicit calls to log::Printf with the new LLDB_LOGF
macro. The macro is similar to LLDB_LOG but supports printf-style format
strings, instead of formatv-style format strings.

So instead of writing:

if (log)
log->Printf("%s\n", str);

You'd write:

LLDB_LOG(log, "%s\n", str);

This change was done mechanically with the command below. I replaced the
spurious if-checks with vim, since I know how to do multi-line
replacements with it.

find . -type f -name '*.cpp' -exec \
sed -i '' -E 's/log->Printf\(/LLDB_LOGF\(log, /g' "{}" +

Differential revision: https://reviews.llvm.org/D65128

llvm-svn: 366936

show more ...

[Target] Generalize language-specific behavior in ThreadPlanStepThrough

Summary:
When creating a ThreadPlan to step through a trampoline, we ask the
ObjC language runtime and the CPP language runtim

[Target] Generalize language-specific behavior in ThreadPlanStepThrough

Summary:
When creating a ThreadPlan to step through a trampoline, we ask the
ObjC language runtime and the CPP language runtime to come up with such a thread
plan if the dynamic loader fails to give us one. I don't see why this behavior
can't be language agnostic.

Differential Revision: https://reviews.llvm.org/D61921

llvm-svn: 362164

show more ...

[NFC] Remove ASCII lines from comments

A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.

Its use is not really consistent across the code base

[NFC] Remove ASCII lines from comments

A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.

Its use is not really consistent across the code base, sometimes the
lines are longer, sometimes they are shorter and sometimes they are
omitted. Furthermore, it looks kind of weird with the 80 column limit,
where the comment actually extends past the line, but not by much.
Furthermore, when /// is used for Doxygen comments, it looks
particularly odd. And when // is used, it incorrectly gives the
impression that it's actually a Doxygen comment.

I assume these lines were added to improve distinguishing between
comments and code. However, given that todays editors and IDEs do a
great job at highlighting comments, I think it's worth to drop this for
the sake of consistency. The alternative is fixing all the
inconsistencies, which would create a lot more churn.

Differential revision: https://reviews.llvm.org/D60508

llvm-svn: 358135

show more ...

Update the file headers across all of the LLVM projects in the monorepo
to reflect the new license.

We understand that people may be surprised that we're moving the header
entirely to discuss the ne

Update the file headers across all of the LLVM projects in the monorepo
to reflect the new license.

We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.

Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.

llvm-svn: 351636

show more ...

Add setting to require hardware breakpoints.

When debugging read-only memory we cannot use software breakpoint. We
already have support for hardware breakpoints and users can specify them
with `-H`.

Add setting to require hardware breakpoints.

When debugging read-only memory we cannot use software breakpoint. We
already have support for hardware breakpoints and users can specify them
with `-H`. However, there's no option to force LLDB to use hardware
breakpoints internally, for example while stepping.

This patch adds a setting target.require-hardware-breakpoint that forces
LLDB to always use hardware breakpoints. Because hardware breakpoints
are a limited resource and can fail to resolve, this patch also extends
error handling in thread plans, where breakpoints are used for stepping.

Differential revision: https://reviews.llvm.org/D54221

llvm-svn: 346920

show more ...

Remove header grouping comments.

This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdate

Remove header grouping comments.

This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.

llvm-svn: 346626

show more ...

Adding support to step into the callable wrapped by libc++ std::function

rdar://problem/14365983

Differential Revision: https://reviews.llvm.org/D52851

llvm-svn: 344371

Reflow paragraphs in comments.

This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to r

Reflow paragraphs in comments.

This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to read.

FYI, the script I used was:

import textwrap
import commands
import os
import sys
import re
tmp = "%s.tmp"%sys.argv[1]
out = open(tmp, "w+")
with open(sys.argv[1], "r") as f:
header = ""
text = ""
comment = re.compile(r'^( *//) ([^ ].*)$')
special = re.compile(r'^((([A-Z]+[: ])|([0-9]+ )).*)|(.*;)$')
for line in f:
match = comment.match(line)
if match and not special.match(match.group(2)):
# skip intentionally short comments.
if not text and len(match.group(2)) < 40:
out.write(line)
continue

if text:
text += " " + match.group(2)
else:
header = match.group(1)
text = match.group(2)

continue

if text:
filled = textwrap.wrap(text, width=(78-len(header)),
break_long_words=False)
for l in filled:
out.write(header+" "+l+'\n')
text = ""

out.write(line)

os.rename(tmp, sys.argv[1])

Differential Revision: https://reviews.llvm.org/D46144

llvm-svn: 331197

show more ...

Move Log from Core -> Utility.

All references to Host and Core have been removed, so this
class can now safely be lowered into Utility.

Differential Revision: https://reviews.llvm.org/D30559

llvm-

Move Log from Core -> Utility.

All references to Host and Core have been removed, so this
class can now safely be lowered into Utility.

Differential Revision: https://reviews.llvm.org/D30559

llvm-svn: 296909

show more ...

Move classes from Core -> Utility.

This moves the following classes from Core -> Utility.

ConstString
Error
RegularExpression
Stream
StreamString

The goal here is to get lldbUtility into a state w

Move classes from Core -> Utility.

This moves the following classes from Core -> Utility.

ConstString
Error
RegularExpression
Stream
StreamString

The goal here is to get lldbUtility into a state where it has
no dependendencies except on itself and LLVM, so it can be the
starting point at which to start untangling LLDB's dependencies.
These are all low level and very widely used classes, and
previously lldbUtility had dependencies up to lldbCore in order
to use these classes. So moving then down to lldbUtility makes
sense from both the short term and long term perspective in
solving this problem.

Differential Revision: https://reviews.llvm.org/D29427

llvm-svn: 293941

show more ...

*** This commit represents a complete reformatting of the LLDB source code
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:

Firstly, merging t

*** This commit represents a complete reformatting of the LLDB source code
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:

Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):

find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;

The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.

Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.

llvm-svn: 280751

show more ...

LLDB help content has accumulated over time without a recent attempt to
review it for consistency, accuracy, and clarity. These changes attempt to
address all of the above while keeping the text rela

LLDB help content has accumulated over time without a recent attempt to
review it for consistency, accuracy, and clarity. These changes attempt to
address all of the above while keeping the text relatively terse.

<rdar://problem/24868841>

llvm-svn: 275485

show more ...

Fix Clang-tidy modernize-use-nullptr and readability-simplify-boolean-expr warnings in some files in source/Target/.

Simplify smart pointers checks in conditions. Other minor fixes.

llvm-svn: 255598

Move lldb-log.cpp to core/Logging.cpp

So that we don't have to update every single #include in the entire
codebase to #include this new header (which used to get included by
lldb-private-log.h, we a

Move lldb-log.cpp to core/Logging.cpp

So that we don't have to update every single #include in the entire
codebase to #include this new header (which used to get included by
lldb-private-log.h, we automatically #include "Logging.h" from
within "Log.h".

llvm-svn: 232653

show more ...

Not all processes have a Dynamic Loader. Be sure to check that it exists before using it.

<rdar://problem/18491391>

llvm-svn: 218699

Revert change I didn't mean to check in.

llvm-svn: 196956

Fix autocompletion for multi-word commands.

<rdar://problem/14183288>

llvm-svn: 196949

If the StepThrough plan makes it back to the frame in which it started, it should say
it succeeded, since the plan that was using it can figure out what to do from there.
It should only say it failed

If the StepThrough plan makes it back to the frame in which it started, it should say
it succeeded, since the plan that was using it can figure out what to do from there.
It should only say it failed if it truely went off into the weeds.

<rdar://problem/15597807>

llvm-svn: 196631

show more ...

Roll back the changes I made in r193907 which created a new Frame
pure virtual base class and made StackFrame a subclass of that. As
I started to build on top of that arrangement today, I found that

Roll back the changes I made in r193907 which created a new Frame
pure virtual base class and made StackFrame a subclass of that. As
I started to build on top of that arrangement today, I found that it
wasn't working out like I intended. Instead I'll try sticking with
the single StackFrame class -- there's too much code duplication to
make a more complicated class hierarchy sensible I think.

llvm-svn: 193983

show more ...