sys: Remove $FreeBSD$: one-line .c comment pattern

Remove /^/[*/]\s*\$FreeBSD\$.*\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

Factor out repeated code in the USB controller drivers to avoid bugs
computing the same isochronous start frame number over and over again.

PR: 257082
MFC after: 1 week
Sponsored by: NVIDIA Network

Factor out repeated code in the USB controller drivers to avoid bugs
computing the same isochronous start frame number over and over again.

PR: 257082
MFC after: 1 week
Sponsored by: NVIDIA Networking

show more ...

Use __containerof() instead of home-rolled versions.

Reviewed by: imp, hselasky
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27582

usb: clean up empty lines in .c and .h files

Merge ^/head r357966 through r357999.

Mark more nodes as CTLFLAG_MPSAFE or CTLFLAG_NEEDGIANT (2 of many)

r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marke

Mark more nodes as CTLFLAG_MPSAFE or CTLFLAG_NEEDGIANT (2 of many)

r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked). Use it in
preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.

Reviewed by: hselasky, kib
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D23632

show more ...

Merge ^/head r327169 through r327340.

Do pass removing some write-only variables from the kernel.

This reduces noise when kernel is compiled by newer GCC versions,
such as one used by external toolchain ports.

Reviewed by: kib, andrew(

Do pass removing some write-only variables from the kernel.

This reduces noise when kernel is compiled by newer GCC versions,
such as one used by external toolchain ports.

Reviewed by: kib, andrew(sys/arm and sys/arm64), emaste(partial), erj(partial)
Reviewed by: jhb (sys/dev/pci/* sys/kern/vfs_aio.c and sys/kern/kern_synch.c)
Differential Revision: https://reviews.freebsd.org/D10385

show more ...

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

dev/usb: minor spelling fixes in comments.

No functional change.

Reviewed by: hselasky

sys/dev: extend use of the howmany() macro when available.

We have a howmany() macro in the <sys/param.h> header that is
convenient to re-use as it makes things easier to read.

Merge ^/head r294961 through r295350.

MfH @r295202

Expect to see panics in routing code at least now.

MFH

Sponsored by: The FreeBSD Foundation

EHCI: Make core reset and port speed reading more generic.

Use driver settable callbacks for handling of:
- core post reset
- reading actual port speed

Typically, OTG enabled EHCI cores wants setti

EHCI: Make core reset and port speed reading more generic.

Use driver settable callbacks for handling of:
- core post reset
- reading actual port speed

Typically, OTG enabled EHCI cores wants setting of USBMODE register,
but this register is not defined in EHCI specification and different
cores can have it on different offset.

Also, for cores with TT extension, actual port speed must be determinable.
But again, EHCI specification not covers this so this patch provides
function for two most common variant of speed bits layout.

Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D5088

show more ...

Merge from head@274682

IFC @r269962

Submitted by: Anish Gupta (akgupt3@gmail.com)

Merge head from 7/28

Sync to HEAD@r269943.

Remove unused defines.
Fix some device_printf's that were missing '\n' at the end or had
speling errors.

PR: 145319
Submitted by: rozhuk.im gmail.com

Pull in r267961 and r267973 again. Fix for issues reported will follow.

Revert r267961, r267973:

These changes prevent sysctl(8) from returning proper output,
such as:

1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1

Revert r267961, r267973:

These changes prevent sysctl(8) from returning proper output,
such as:

1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1)
truss: can not get etype: Cannot allocate memory

show more ...

Extend the meaning of the CTLFLAG_TUN flag to automatically check if
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statica

Extend the meaning of the CTLFLAG_TUN flag to automatically check if
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.

Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.

MFC after: 2 weeks
Sponsored by: Mellanox Technologies

show more ...

MFC @ r266724

An SVM update will follow this.