eventdev: remove single event enqueue and dequeue

Remove the single event enqueue and dequeue, since they did not
provide any noticeable performance benefits.

This is a change of the ABI, previousl

eventdev: remove single event enqueue and dequeue

Remove the single event enqueue and dequeue, since they did not
provide any noticeable performance benefits.

This is a change of the ABI, previously announced as a deprecation
notice. These functions were not directly invoked by the application,
so the API remains unaffected.

Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>

show more ...

eventdev: add event pre-schedule hint

Add a new eventdev API to provide a hint to the eventdev PMD to
pre-schedule the next event into the event port, without releasing
the current flow context.
Eve

eventdev: add event pre-schedule hint

Add a new eventdev API to provide a hint to the eventdev PMD to
pre-schedule the next event into the event port, without releasing
the current flow context.
Event device that support this feature advertises the capability
using the RTE_EVENT_DEV_CAP_PRESCHEDULE_EXPLICIT capability flag.

Application can invoke `rte_event_port_preschedule` to hint the PMD,
if event device does not support this feature it is treated as a no-op.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

show more ...

eventdev: add event port pre-schedule modify

Some event devices allow pre-schedule types to be modified at
runtime on an event port.
Add `RTE_EVENT_DEV_CAP_PER_PORT_PRESCHEDULE` capability
to indica

eventdev: add event port pre-schedule modify

Some event devices allow pre-schedule types to be modified at
runtime on an event port.
Add `RTE_EVENT_DEV_CAP_PER_PORT_PRESCHEDULE` capability
to indicate that the event device supports this feature.

Add `rte_event_port_preschedule_modify()` API to modify the
pre-schedule type at runtime.
To avoid fastpath capability checks, the API reports -ENOTSUP
if the event device does not support this feature.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

show more ...

use C linkage where appropriate in headers

Assure that 'extern "C" { /../ }' do not cover files included from a
particular header file, and address minor issues resulting from this
change of order.

use C linkage where appropriate in headers

Assure that 'extern "C" { /../ }' do not cover files included from a
particular header file, and address minor issues resulting from this
change of order.

Dealing with C++ should delegate to the individual include file level,
rather than being imposed by the user of that file. For example,
forcing C linkage prevents __Generic macros being replaced with
overloaded static inline functions in C++ translation units.

Eliminate 'extern "C"' from files which do not declare any symbols
(e.g., only macros or struct types).

On the other hand, the headers check is too naive in assuming that all
headers must contain a 'extern "C"'. Such a check was added in commit
1ee492bdc4ff ("buildtools/chkincs: check missing C++ guards").
Since this current change results in many headers not containing such
a token, remove the check for 'extern "C"' until we have a better
implementation.

Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>

show more ...

lib: move alignment attribute on types for MSVC

The current location used for __rte_aligned(a) for alignment of types
is not compatible with MSVC. There is only a single location accepted
by both to

lib: move alignment attribute on types for MSVC

The current location used for __rte_aligned(a) for alignment of types
is not compatible with MSVC. There is only a single location accepted
by both toolchains.

The standard offers no alignment facility that compatibly interoperates
with C and C++ but it may be achieved by relocating the placement of
__rte_aligned(a) to the aforementioned location accepted by all currently
supported toolchains.

To allow alignment for both compilers, do the following:

* Expand __rte_aligned(a) to __declspec(align(a)) when building
with MSVC.

* Move __rte_aligned from the end of {struct,union} definitions to
be between {struct,union} and tag.

The placement between {struct,union} and the tag allows the desired
alignment to be imparted on the type regardless of the toolchain being
used for all of GCC, LLVM, MSVC compilers building both C and C++.

Note: this move has an additional benefit as Doxygen is not confused
anymore like for the rte_event_vector struct definition.

Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@huawei.com>
Acked-by: Chengwen Feng <fengchengwen@huawei.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>

show more ...

lib: use log helper with prefix

Use RTE_LOG_LINE_PREFIX instead of RTE_LOG_LINE in macro expansions
which allows a prefix and arguments to be inserted into the log line
without the need to use the #

lib: use log helper with prefix

Use RTE_LOG_LINE_PREFIX instead of RTE_LOG_LINE in macro expansions
which allows a prefix and arguments to be inserted into the log line
without the need to use the ## args variadic argument pack extension.

Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@huawei.com>

show more ...

eventdev: use a dynamic logtype

With a little setup in eventdev_pmd.h, the eventdev drivers
and API can be converted to dynamic log type.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.or

eventdev: use a dynamic logtype

With a little setup in eventdev_pmd.h, the eventdev drivers
and API can be converted to dynamic log type.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>

show more ...

lib: use per line logging in helpers

Use RTE_LOG_LINE in existing macros that append a \n.
This will help catching unwanted newline character or multilines
in log messages.

Signed-off-by: David Mar

lib: use per line logging in helpers

Use RTE_LOG_LINE in existing macros that append a \n.
This will help catching unwanted newline character or multilines
in log messages.

Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Chengwen Feng <fengchengwen@huawei.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>

show more ...

lib: remove redundant newline from logs

Fix places where two newline characters may be logged.

Cc: stable@dpdk.org

Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Stephen Hemmi

lib: remove redundant newline from logs

Fix places where two newline characters may be logged.

Cc: stable@dpdk.org

Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>

show more ...

eventdev: introduce link profiles

A collection of event queues linked to an event port can be
associated with a unique identifier called as a link profile, multiple
such profiles can be created base

eventdev: introduce link profiles

A collection of event queues linked to an event port can be
associated with a unique identifier called as a link profile, multiple
such profiles can be created based on the event device capability
using the function `rte_event_port_profile_links_set` which takes
arguments similar to `rte_event_port_link` in addition to the profile
identifier.

The maximum link profiles that are supported by an event device
is advertised through the structure member
`rte_event_dev_info::max_profiles_per_port`.
By default, event ports are configured to use the link profile 0
on initialization.

Once multiple link profiles are set up and the event device is started,
the application can use the function `rte_event_port_profile_switch`
to change the currently active profile on an event port. This effects
the next `rte_event_dequeue_burst` call, where the event queues
associated with the newly active link profile will participate in
scheduling.

An unlink function `rte_event_port_profile_unlink` is provided
to modify the links associated to a profile, and
`rte_event_port_profile_links_get` can be used to retrieve the
links associated with a profile.

Using Link profiles can reduce the overhead of linking/unlinking and
waiting for unlinks in progress in fast-path and gives applications
the ability to switch between preset profiles on the fly.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

show more ...

eventdev/dma: introduce DMA adapter

Introduce event dma adapter interface to transfer packets between
dma device and event device.

Signed-off-by: Amit Prakash Shukla <amitprakashs@marvell.com>
Acke

eventdev/dma: introduce DMA adapter

Introduce event dma adapter interface to transfer packets between
dma device and event device.

Signed-off-by: Amit Prakash Shukla <amitprakashs@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

show more ...

remove C11 compatibility macro

C11 conformant compiler is documented as a minimum requirement to build
and consume DPDK.
Remove use of RTE_STD_C11 macro marking use of C11 features with
__extension_

remove C11 compatibility macro

C11 conformant compiler is documented as a minimum requirement to build
and consume DPDK.
Remove use of RTE_STD_C11 macro marking use of C11 features with
__extension__ since it is no longer necessary and then remove definition
of RTE_STD_C11 macro.

Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Morten Brørup <mb@smartsharesystems.com>

show more ...

lib: remove blank line ending comment blocks

At the end of a comment, no need for an extra line.

This pattern was fixed with the following command:
git ls lib | xargs sed -i '/^ *\* *$/{N;/ *\*\/ *

lib: remove blank line ending comment blocks

At the end of a comment, no need for an extra line.

This pattern was fixed with the following command:
git ls lib | xargs sed -i '/^ *\* *$/{N;/ *\*\/ *$/D;}'

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>

show more ...

eventdev: increase xstats ID width to 64 bits

Increase xstats ID width from 32 to 64 bits. This also
fixes the xstats ID datatype discrepancy between reset and
rest of the xstats family.

Signed-off

eventdev: increase xstats ID width to 64 bits

Increase xstats ID width from 32 to 64 bits. This also
fixes the xstats ID datatype discrepancy between reset and
rest of the xstats family.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

show more ...

eventdev: introduce event cryptodev vector type

Introduce ability to aggregate crypto operations processed by event
crypto adapter into single event containing rte_event_vector whose event
type is R

eventdev: introduce event cryptodev vector type

Introduce ability to aggregate crypto operations processed by event
crypto adapter into single event containing rte_event_vector whose event
type is RTE_EVENT_TYPE_CRYPTODEV_VECTOR.

Application should set RTE_EVENT_CRYPTO_ADAPTER_EVENT_VECTOR in
rte_event_crypto_adapter_queue_conf::flag and provide vector configuration
with respect of rte_event_crypto_adapter_vector_limits, which could be
obtained by calling rte_event_crypto_adapter_vector_limits_get, to enable
vectorization.

The event crypto adapter would be responsible for vectorizing the crypto
operations based on provided response information in
rte_event_crypto_metadata::response_info.

Updated drivers and tests accordingly to new API.

Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

show more ...

eventdev: add prefix to public symbol

Add `rte` prefix to stop flush callback function pointer
declaration to avoid conflicts with application functions,
``eventdev_stop_flush_t`` is renamed to
``rt

eventdev: add prefix to public symbol

Add `rte` prefix to stop flush callback function pointer
declaration to avoid conflicts with application functions,
``eventdev_stop_flush_t`` is renamed to
``rte_eventdev_stop_flush_t``.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

show more ...

eventdev/eth_tx: add queue start/stop API

Add support to start or stop a particular queue
that is associated with the adapter.

Start function enables the Tx adapter to start enqueueing
packets to t

eventdev/eth_tx: add queue start/stop API

Add support to start or stop a particular queue
that is associated with the adapter.

Start function enables the Tx adapter to start enqueueing
packets to the Tx queue.

Stop function stops the Tx adapter from enqueueing any
packets to the Tx queue. The stop API also frees any packets
that may have been buffered for this queue. All in-flight packets
destined to the queue are freed by the adapter runtime until the
queue is started again.

Signed-off-by: Naga Harish K S V <s.v.naga.harish.k@intel.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>

show more ...

eventdev: add weight and affinity attributes to queue conf

Added new fields to represent event queue weight and affinity in
rte_event_queue_conf structure. Internal op to get queue attribute is
remo

eventdev: add weight and affinity attributes to queue conf

Added new fields to represent event queue weight and affinity in
rte_event_queue_conf structure. Internal op to get queue attribute is
removed as it is no longer needed. Updated driver to use the new field.

Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

show more ...

eventdev/timer: support periodic event timer

Add support to configure and use periodic event timers in
software timer adapter.

The structure ``rte_event_timer_adapter_stats`` is extended
by adding

eventdev/timer: support periodic event timer

Add support to configure and use periodic event timers in
software timer adapter.

The structure ``rte_event_timer_adapter_stats`` is extended
by adding a new field, ``evtim_drop_count``. This stat
represents the number of times an event_timer expiry event
is dropped by the event timer adapter.

Updated the software eventdev pmd timer_adapter_caps_get
callback function to report the support of periodic
event timer capability.

Signed-off-by: Naga Harish K S V <s.v.naga.harish.k@intel.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>

show more ...

eventdev/eth_tx: add adapter instance get API

Added rte_event_eth_tx_adapter_instance_get() to get the
adapter instance id for specified ethernet device id and
tx queue index.

Added testcase for rt

eventdev/eth_tx: add adapter instance get API

Added rte_event_eth_tx_adapter_instance_get() to get the
adapter instance id for specified ethernet device id and
tx queue index.

Added testcase for rte_event_eth_tx_adapter_instance_get().

Added rte_event_eth_tx_adapter_instance_get() details in
prog_guide/event_ethernet_tx_adapter.rst

Signed-off-by: Ganapati Kundapura <ganapati.kundapura@intel.com>
Reviewed-by: Naga Harish K S V <s.v.naga.harish.k@intel.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

show more ...

eventdev/eth_rx: add adapter instance get API

Added rte_event_eth_rx_adapter_instance_get() to get
adapter instance id for specified ethernet device id and
rx queue index.

Added telemetry handler f

eventdev/eth_rx: add adapter instance get API

Added rte_event_eth_rx_adapter_instance_get() to get
adapter instance id for specified ethernet device id and
rx queue index.

Added telemetry handler for rte_event_eth_rx_adapter_instance_get().

Added test case for rte_event_eth_rx_adapter_instance_get()

Added rte_event_eth_rx_adapter_instance_get() details in
prog_guide/event_ethernet_rx_adapter.rst

Signed-off-by: Ganapati Kundapura <ganapati.kundapura@intel.com>
Reviewed-by: Naga Harish K S V <s.v.naga.harish.k@intel.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

show more ...

dev: hide driver object

Make rte_driver opaque for non internal users.
This will make extending this object possible without breaking the ABI.

Introduce a new driver header and move rte_driver defi

dev: hide driver object

Make rte_driver opaque for non internal users.
This will make extending this object possible without breaking the ABI.

Introduce a new driver header and move rte_driver definition.
Update drivers and library to use the internal header.

Some applications may have been dereferencing rte_driver objects, mark
this object's accessors as stable.

Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>

show more ...

eventdev: add weight and affinity to queue attributes

Extended eventdev queue QoS attributes to support weight and affinity.
If queues are of the same priority, events from the queue with highest
we

eventdev: add weight and affinity to queue attributes

Extended eventdev queue QoS attributes to support weight and affinity.
If queues are of the same priority, events from the queue with highest
weight will be scheduled first. Affinity indicates the number of times,
the subsequent schedule calls from an event port will use the same event
queue. Schedule call selects another queue if current queue goes empty
or schedule count reaches affinity count.

To avoid ABI break, weight and affinity attributes are not yet added to
queue config structure and rely on PMD for managing it. New eventdev op
queue_attr_get can be used to get it from the PMD.

Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

show more ...

eventdev: support setting queue attributes at runtime

Added a new eventdev API rte_event_queue_attr_set(), to set event queue
attributes at runtime from the values set during initialization using
rt

eventdev: support setting queue attributes at runtime

Added a new eventdev API rte_event_queue_attr_set(), to set event queue
attributes at runtime from the values set during initialization using
rte_event_queue_setup(). PMD's supporting this feature should expose the
capability RTE_EVENT_DEV_CAP_RUNTIME_QUEUE_ATTR.

Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

show more ...

eventdev: quiesce an event port

Add function to quiesce any core specific resources consumed by
the event port.

When the application decides to migrate the event port to another lcore
or teardown t

eventdev: quiesce an event port

Add function to quiesce any core specific resources consumed by
the event port.

When the application decides to migrate the event port to another lcore
or teardown the current lcore it may to call `rte_event_port_quiesce`
to make sure that all the data associated with the event port are released
from the lcore, this might also include any prefetched events.

While releasing the event port from the lcore, this function calls the
user-provided flush callback once per event.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

show more ...