examples/vm_power_manager: remove use of EAL logtype

Be consistent for all the error printouts and use fprintf().
The EAL logtype is reserved for internal use by EAL.

Signed-off-by: Stephen Hemming

examples/vm_power_manager: remove use of EAL logtype

Be consistent for all the error printouts and use fprintf().
The EAL logtype is reserved for internal use by EAL.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Hunt <david.hunt@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>

show more ...

ethdev: add namespace

Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to

ethdev: add namespace

Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.

All internal components switched to using new names.

Syntax fixed on lines that this patch touches.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>

show more ...

ethdev: fix max Rx packet length

There is a confusion on setting max Rx packet length, this patch aims to
clarify it.

'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_p

ethdev: fix max Rx packet length

There is a confusion on setting max Rx packet length, this patch aims to
clarify it.

'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_pkt_len' field of the config struct 'struct
rte_eth_conf'.

Also 'rte_eth_dev_set_mtu()' API can be used to set the MTU, and result
stored into '(struct rte_eth_dev)->data->mtu'.

These two APIs are related but they work in a disconnected way, they
store the set values in different variables which makes hard to figure
out which one to use, also having two different method for a related
functionality is confusing for the users.

Other issues causing confusion is:
* maximum transmission unit (MTU) is payload of the Ethernet frame. And
'max_rx_pkt_len' is the size of the Ethernet frame. Difference is
Ethernet frame overhead, and this overhead may be different from
device to device based on what device supports, like VLAN and QinQ.
* 'max_rx_pkt_len' is only valid when application requested jumbo frame,
which adds additional confusion and some APIs and PMDs already
discards this documented behavior.
* For the jumbo frame enabled case, 'max_rx_pkt_len' is an mandatory
field, this adds configuration complexity for application.

As solution, both APIs gets MTU as parameter, and both saves the result
in same variable '(struct rte_eth_dev)->data->mtu'. For this
'max_rx_pkt_len' updated as 'mtu', and it is always valid independent
from jumbo frame.

For 'rte_eth_dev_configure()', 'dev->data->dev_conf.rxmode.mtu' is user
request and it should be used only within configure function and result
should be stored to '(struct rte_eth_dev)->data->mtu'. After that point
both application and PMD uses MTU from this variable.

When application doesn't provide an MTU during 'rte_eth_dev_configure()'
default 'RTE_ETHER_MTU' value is used.

Additional clarification done on scattered Rx configuration, in
relation to MTU and Rx buffer size.
MTU is used to configure the device for physical Rx/Tx size limitation,
Rx buffer is where to store Rx packets, many PMDs use mbuf data buffer
size as Rx buffer size.
PMDs compare MTU against Rx buffer size to decide enabling scattered Rx
or not. If scattered Rx is not supported by device, MTU bigger than Rx
buffer size should fail.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>

show more ...

net: add macro to extract MAC address bytes

Added macros to simplify print of MAC address.
The six bytes of a MAC address are extracted in
a macro here, to improve code readablity.

Signed-off-by: A

net: add macro to extract MAC address bytes

Added macros to simplify print of MAC address.
The six bytes of a MAC address are extracted in
a macro here, to improve code readablity.

Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

examples: add eal cleanup to examples

According to the programming guide, the rte_eal_init should be used pairs
with rte_eal_cleanup.

This patch add rte_eal_cleanup to examples to encourage new use

examples: add eal cleanup to examples

According to the programming guide, the rte_eal_init should be used pairs
with rte_eal_cleanup.

This patch add rte_eal_cleanup to examples to encourage new users of
DPDK to use it.

Fixes: aec9c13c5257 ("eal: add function to release internal resources")
Fixes: 3d0fad56b74a ("examples/fips_validation: add crypto FIPS application")
Fixes: c8e6ceecebc1 ("examples/ioat: add new sample app for ioat driver")
Fixes: 4ff457986f76 ("examples/l2fwd-event: add default poll mode routines")
Fixes: 08bd1a174461 ("examples/l3fwd-graph: add graph-based l3fwd skeleton")
Fixes: c5eebf85badc ("examples/ntb: add example for NTB")
Fixes: b77f66002812 ("examples/pipeline: add new example application")
Fixes: edbed86d1cc3 ("examples/vdpa: introduce a new sample for vDPA")
Fixes: c19beb3f38cd ("examples/vhost_blk: introduce vhost storage sample")
Fixes: f5188211c721 ("examples/vhost_crypto: add sample application")
Cc: stable@dpdk.org

Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>

show more ...

power: rename constants

Rename the #defines to have an RTE_POWER_ prefix

Fixes: 210c383e247b ("power: packet format for vm power management")
Fixes: cd0d5547e873 ("power: vm communication channels

power: rename constants

Rename the #defines to have an RTE_POWER_ prefix

Fixes: 210c383e247b ("power: packet format for vm power management")
Fixes: cd0d5547e873 ("power: vm communication channels in guest")
Cc: stable@dpdk.org

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>

show more ...

examples/vm_power: fix memory leak

Fix memory leak where variable oob_enable can go out of scope leaking
the storage it points to.

Coverity issue: 337674
Fixes: 95f648ff9ee ("examples/vm_power: mak

examples/vm_power: fix memory leak

Fix memory leak where variable oob_enable can go out of scope leaking
the storage it points to.

Coverity issue: 337674
Fixes: 95f648ff9ee ("examples/vm_power: make branch ratio threshold per core")

Signed-off-by: Rory Sexton <rory.sexton@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>

show more ...

build: replace use of old build macros

Use the newer macros defined by meson in all DPDK source code, to ensure
there are no errors when the old non-standard macros are removed.

Signed-off-by: Bruc

build: replace use of old build macros

Use the newer macros defined by meson in all DPDK source code, to ensure
there are no errors when the old non-standard macros are removed.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>

show more ...

examples: use new link status print format

Add usage of rte_eth_link_to_str function to example
applications.

Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Reviewed-by: Ferruh Yigit <ferruh.yig

examples: use new link status print format

Add usage of rte_eth_link_to_str function to example
applications.

Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

examples: fix port mask parsing failure handling

Giving invalid or zero portmask as command line option to
these applications will have an unexpected response.
The reason behind this is that the ret

examples: fix port mask parsing failure handling

Giving invalid or zero portmask as command line option to
these applications will have an unexpected response.
The reason behind this is that the return value of function
that parses portmask is stored in a variable whose datatype is
unsigned int, hence returning -1 in case of zero or
invalid portmask causes an unexpected behaviour.
If we return 0 instead of -1 this issue can be resolved.
The program already contains the functionality to print
"invalid portmask" and program usage if zero is returned.

Signed-off-by: Sarosh Arif <sarosh.arif@emumba.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>

show more ...

examples/vm_power: make branch ratio threshold per core

This modification allows for the branch ratio threshold to be set
per core rather than system wide. This gives greater flexibility to
the bran

examples/vm_power: make branch ratio threshold per core

This modification allows for the branch ratio threshold to be set
per core rather than system wide. This gives greater flexibility to
the branch ratio monitoring allowing it to manage different
workloads with different characteristics on the same system.

Signed-off-by: Rory Sexton <rory.sexton@intel.com>
Reviewed-by: David Hunt <david.hunt@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>

show more ...

examples: remove extra new line after link duplex

This patch removes extra 'new line' in few app examples.

Fixes: d3641ae863 ("examples: update link status checks")
Fixes: 387259bd6c ("examples/l2f

examples: remove extra new line after link duplex

This patch removes extra 'new line' in few app examples.

Fixes: d3641ae863 ("examples: update link status checks")
Fixes: 387259bd6c ("examples/l2fwd-crypto: add sample application")
Fixes: 4ff457986f ("examples/l2fwd-event: add default poll mode routines")
Fixes: e64833f227 ("examples/l2fwd-keepalive: add sample application")
Fixes: 204896f8d6 ("examples/l2fwd-jobstats: add new example")
Fixes: c8e6ceeceb ("examples/ioat: add new sample app for ioat driver")
Fixes: cc8f4d020c ("examples/ip_reassembly: initial import")
Fixes: d299106e8e ("examples/ipsec-secgw: add IPsec sample application")
Fixes: 39aad0e88c ("examples/flow_distributor: new example to demonstrate EFD")
Fixes: d48415e1fe ("examples/performance-thread: add l3fwd-thread app")
Fixes: 20c78ac9ee ("examples/vm_power_mgr: add port initialisation")
Fixes: 361b2e9559 ("acl: new sample l3fwd-acl")
Fixes: de3cfa2c98 ("sched: initial import")
Fixes: d7937e2e3d ("power: initial import")
Fixes: 3fc5ca2f63 ("kni: initial import")
Cc: stable@dpdk.org

Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>

show more ...

replace unused attributes

There is a common macro __rte_unused, avoiding warnings,
which is now used where appropriate for consistency.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>

examples: check status of getting MAC address

The return value of rte_eth_macaddr_get() was changed from void to int.
Update the usage of the functions according to the new return type.

Signed-off-

examples: check status of getting MAC address

The return value of rte_eth_macaddr_get() was changed from void to int.
Update the usage of the functions according to the new return type.

Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>

show more ...

examples: check status of getting link info

The return value of rte_eth_link_get() and rte_eth_link_get_nowait()
was changed from void to int. Update the usage of the functions
according to the new

examples: check status of getting link info

The return value of rte_eth_link_get() and rte_eth_link_get_nowait()
was changed from void to int. Update the usage of the functions
according to the new return type.

Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>

show more ...

examples: take promiscuous mode switch result into account

rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these f

examples: take promiscuous mode switch result into account

rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across examples according to new return type.

Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>

show more ...

examples: check status of getting ethdev info

rte_eth_dev_info_get() return value was changed from void to
int, so this patch modify rte_eth_dev_info_get() usage across
examples according to its new

examples: check status of getting ethdev info

rte_eth_dev_info_get() return value was changed from void to
int, so this patch modify rte_eth_dev_info_get() usage across
examples according to its new return type.

Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

examples/power: add FIFO per core for JSON interface

This patch implements a separate FIFO for each cpu core to improve the
previous functionality where anyone with access to the FIFO could affect
a

examples/power: add FIFO per core for JSON interface

This patch implements a separate FIFO for each cpu core to improve the
previous functionality where anyone with access to the FIFO could affect
any core on the system. By using appropriate permissions, FIFO interfaces
can be configured to only affect the particular cores.

Because each FIFO is per core, the following fields have been removed
from the command JSON format: core_list, resource_id, name.

Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Signed-off-by: Lukasz Gosiewski <lukaszx.gosiewski@intel.com>
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>

show more ...

net: add rte prefix to ether defines

Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_C

net: add rte prefix to ether defines

Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.

Do not update the command line library to avoid adding a dependency to
librte_net.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

net: add rte prefix to ether structures

Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_

net: add rte prefix to ether structures

Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.

Do not update the command line library to avoid adding a dependency to
librte_net.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

examples/power: fix build with some disabled PMDs

Running the devtools/test-build.sh script on IBM Power systems fails
because the IXGBE_PMD is explicity disabled for Power as an untested
driver, bu

examples/power: fix build with some disabled PMDs

Running the devtools/test-build.sh script on IBM Power systems fails
because the IXGBE_PMD is explicity disabled for Power as an untested
driver, but the examples/vm_power_manager application has a hard
dependency on a function call in the IXGBE_PMD.

Modify the example application so that all dependencies on PMD code
are conditionally compiled.

Bugzilla ID: 237
Fixes: c9a4779135c9 ("examples/vm_power_mgr: set MAC address of VF")

Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: David Hunt <david.hunt@intel.com>

show more ...

examples/power: fix unreachable VF MAC init

A for loop to MAX_VFS had a break as the last line, so the w++
would never get called, breaking out of the loop after the
first iteration. Remove the brea

examples/power: fix unreachable VF MAC init

A for loop to MAX_VFS had a break as the last line, so the w++
would never get called, breaking out of the loop after the
first iteration. Remove the break so that the loop can execute
properly.

Coverity issue: 337682
Fixes: ace158c4a821 ("examples/vm_power: add check for port count")
Cc: stable@dpdk.org

Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Rami Rosen <ramirose@gmail.com>

show more ...

examples/power: fix resource leak

Coverity issue: 337674
Fixes: 99a968fac0cf ("examples/vm_power: add core list parameter")
Cc: stable@dpdk.org

Signed-off-by: David Hunt <david.hunt@intel.com>

examples/power: add host channel to power manager

This patch adds a fifo channel to the vm_power_manager app through which
we can send commands and polices. Intended for sending JSON strings.
The fi

examples/power: add host channel to power manager

This patch adds a fifo channel to the vm_power_manager app through which
we can send commands and polices. Intended for sending JSON strings.
The fifo is at /tmp/powermonitor/fifo

Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>

show more ...

examples/vm_power: make branch ratio configurable

For different workloads and poll loops, the theshold
may be different for when you want to scale up and down.

This patch allows changing of the def

examples/vm_power: make branch ratio configurable

For different workloads and poll loops, the theshold
may be different for when you want to scale up and down.

This patch allows changing of the default branch ratio
by using the -b command line argument (or --branch-ratio=)

Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>

show more ...