examples: use stdatomic API

Replace the use of gcc builtin __atomic_xxx intrinsics with
corresponding rte_atomic_xxx optional rte stdatomic API.

Signed-off-by: Tyler Retzlaff <roretzla@linux.micros

examples: use stdatomic API

Replace the use of gcc builtin __atomic_xxx intrinsics with
corresponding rte_atomic_xxx optional rte stdatomic API.

Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>

show more ...

examples: move alignment attribute on types for MSVC

Move location of __rte_aligned(a) to new conventional location. The new
placement between {struct,union} and the tag allows the desired
alignment

examples: move alignment attribute on types for MSVC

Move location of __rte_aligned(a) to new conventional location. The new
placement between {struct,union} and the tag allows the desired
alignment to be imparted on the type regardless of the toolchain being
used for both C and C++. Additionally, it avoids confusion by Doxygen
when generating documentation.

Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Reviewed-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

show more ...

use C11 alignof

Replace use of __alignof__(e) (resp. __alignof__(T) with C11
alignof(typeof(e)) (resp. alignof(T)) to improve portability
between toolchains.

Signed-off-by: Tyler Retzlaff <roretzla

use C11 alignof

Replace use of __alignof__(e) (resp. __alignof__(T) with C11
alignof(typeof(e)) (resp. alignof(T)) to improve portability
between toolchains.

Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

show more ...

use abstracted bit count functions

Now that DPDK provides such bit count functions, make use of them.

This patch was prepared with a "brutal" commandline:

$ old=__builtin_clzll; new=rte_clz64;
g

use abstracted bit count functions

Now that DPDK provides such bit count functions, make use of them.

This patch was prepared with a "brutal" commandline:

$ old=__builtin_clzll; new=rte_clz64;
git grep -lw $old :^lib/eal/include/rte_bitops.h |
xargs sed -i -e "s#\<$old\>#$new#g"
$ old=__builtin_clz; new=rte_clz32;
git grep -lw $old :^lib/eal/include/rte_bitops.h |
xargs sed -i -e "s#\<$old\>#$new#g"

$ old=__builtin_ctzll; new=rte_ctz64;
git grep -lw $old :^lib/eal/include/rte_bitops.h |
xargs sed -i -e "s#\<$old\>#$new#g"
$ old=__builtin_ctz; new=rte_ctz32;
git grep -lw $old :^lib/eal/include/rte_bitops.h |
xargs sed -i -e "s#\<$old\>#$new#g"

$ old=__builtin_popcountll; new=rte_popcount64;
git grep -lw $old :^lib/eal/include/rte_bitops.h |
xargs sed -i -e "s#\<$old\>#$new#g"
$ old=__builtin_popcount; new=rte_popcount32;
git grep -lw $old :^lib/eal/include/rte_bitops.h |
xargs sed -i -e "s#\<$old\>#$new#g"

Then inclusion of rte_bitops.h was added were necessary.

Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>

show more ...

bbdev: allow operation type enum for growth

Updated the enum for rte_bbdev_op_type
to allow to keep ABI compatible for enum insertion
while adding padded maximum value for array need.
Removing RTE_B

bbdev: allow operation type enum for growth

Updated the enum for rte_bbdev_op_type
to allow to keep ABI compatible for enum insertion
while adding padded maximum value for array need.
Removing RTE_BBDEV_OP_TYPE_COUNT and instead exposing
RTE_BBDEV_OP_TYPE_SIZE_MAX.

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

show more ...

ethdev: remove Rx header split port offload

As announced in the deprecation note, remove the Rx offload flag
'RTE_ETH_RX_OFFLOAD_HEADER_SPLIT' and 'split_hdr_size' field from
the structure 'rte_eth_

ethdev: remove Rx header split port offload

As announced in the deprecation note, remove the Rx offload flag
'RTE_ETH_RX_OFFLOAD_HEADER_SPLIT' and 'split_hdr_size' field from
the structure 'rte_eth_rxmode'. Meanwhile, the place where the examples
and apps initialize the 'split_hdr_size' field, and where the drivers
check if the 'split_hdr_size' value is 0 are also removed.

User can still use `RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT` for per-queue packet
split offload, which is configured by 'rte_eth_rxseg_split'.

Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>

show more ...

remove prefix to some local macros in apps and examples

RTE_TEST_[RT]X_DESC_DEFAULT and RTE_TEST_[RT]X_DESC_MAX macros have been
copied in a lot of app/ and examples/ code.
Those macros are local to

remove prefix to some local macros in apps and examples

RTE_TEST_[RT]X_DESC_DEFAULT and RTE_TEST_[RT]X_DESC_MAX macros have been
copied in a lot of app/ and examples/ code.
Those macros are local to each program.

They are not related to a DPDK public header/API, drop the RTE_TEST_
prefix.

Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@amd.com>

show more ...

fix spelling in comments and strings

The tool comes from https://github.com/jsoref

Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>

ethdev: add namespace

Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to

ethdev: add namespace

Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.

All internal components switched to using new names.

Syntax fixed on lines that this patch touches.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>

show more ...

ethdev: fix max Rx packet length

There is a confusion on setting max Rx packet length, this patch aims to
clarify it.

'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_p

ethdev: fix max Rx packet length

There is a confusion on setting max Rx packet length, this patch aims to
clarify it.

'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_pkt_len' field of the config struct 'struct
rte_eth_conf'.

Also 'rte_eth_dev_set_mtu()' API can be used to set the MTU, and result
stored into '(struct rte_eth_dev)->data->mtu'.

These two APIs are related but they work in a disconnected way, they
store the set values in different variables which makes hard to figure
out which one to use, also having two different method for a related
functionality is confusing for the users.

Other issues causing confusion is:
* maximum transmission unit (MTU) is payload of the Ethernet frame. And
'max_rx_pkt_len' is the size of the Ethernet frame. Difference is
Ethernet frame overhead, and this overhead may be different from
device to device based on what device supports, like VLAN and QinQ.
* 'max_rx_pkt_len' is only valid when application requested jumbo frame,
which adds additional confusion and some APIs and PMDs already
discards this documented behavior.
* For the jumbo frame enabled case, 'max_rx_pkt_len' is an mandatory
field, this adds configuration complexity for application.

As solution, both APIs gets MTU as parameter, and both saves the result
in same variable '(struct rte_eth_dev)->data->mtu'. For this
'max_rx_pkt_len' updated as 'mtu', and it is always valid independent
from jumbo frame.

For 'rte_eth_dev_configure()', 'dev->data->dev_conf.rxmode.mtu' is user
request and it should be used only within configure function and result
should be stored to '(struct rte_eth_dev)->data->mtu'. After that point
both application and PMD uses MTU from this variable.

When application doesn't provide an MTU during 'rte_eth_dev_configure()'
default 'RTE_ETHER_MTU' value is used.

Additional clarification done on scattered Rx configuration, in
relation to MTU and Rx buffer size.
MTU is used to configure the device for physical Rx/Tx size limitation,
Rx buffer is where to store Rx packets, many PMDs use mbuf data buffer
size as Rx buffer size.
PMDs compare MTU against Rx buffer size to decide enabling scattered Rx
or not. If scattered Rx is not supported by device, MTU bigger than Rx
buffer size should fail.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>

show more ...

examples/bbdev: use compiler atomics for flag sync

Convert rte_atomic usages to compiler atomic built-ins
for global_exit_flag sync.

Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruif

examples/bbdev: use compiler atomics for flag sync

Convert rte_atomic usages to compiler atomic built-ins
for global_exit_flag sync.

Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>

show more ...

net: add macro to extract MAC address bytes

Added macros to simplify print of MAC address.
The six bytes of a MAC address are extracted in
a macro here, to improve code readablity.

Signed-off-by: A

net: add macro to extract MAC address bytes

Added macros to simplify print of MAC address.
The six bytes of a MAC address are extracted in
a macro here, to improve code readablity.

Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

net: add macro for MAC address print

Added macro to print six bytes of MAC address.
The MAC addresses will be printed in upper case
hexadecimal format.
In case there is a specific check for lower ca

net: add macro for MAC address print

Added macro to print six bytes of MAC address.
The MAC addresses will be printed in upper case
hexadecimal format.
In case there is a specific check for lower case
MAC address, the user may need to make a change in
such test case after this patch.

Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

examples: add eal cleanup to examples

According to the programming guide, the rte_eal_init should be used pairs
with rte_eal_cleanup.

This patch add rte_eal_cleanup to examples to encourage new use

examples: add eal cleanup to examples

According to the programming guide, the rte_eal_init should be used pairs
with rte_eal_cleanup.

This patch add rte_eal_cleanup to examples to encourage new users of
DPDK to use it.

Fixes: aec9c13c5257 ("eal: add function to release internal resources")
Fixes: 3d0fad56b74a ("examples/fips_validation: add crypto FIPS application")
Fixes: c8e6ceecebc1 ("examples/ioat: add new sample app for ioat driver")
Fixes: 4ff457986f76 ("examples/l2fwd-event: add default poll mode routines")
Fixes: 08bd1a174461 ("examples/l3fwd-graph: add graph-based l3fwd skeleton")
Fixes: c5eebf85badc ("examples/ntb: add example for NTB")
Fixes: b77f66002812 ("examples/pipeline: add new example application")
Fixes: edbed86d1cc3 ("examples/vdpa: introduce a new sample for vDPA")
Fixes: c19beb3f38cd ("examples/vhost_blk: introduce vhost storage sample")
Fixes: f5188211c721 ("examples/vhost_crypto: add sample application")
Cc: stable@dpdk.org

Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>

show more ...

examples/bbdev: fix header include for musl

The header file unistd.h should not be included from sys/ directory,
it is an error with musl libc.

Fixes: 1ffee690eaa1 ("examples/bbdev: add sample app"

examples/bbdev: fix header include for musl

The header file unistd.h should not be included from sys/ directory,
it is an error with musl libc.

Fixes: 1ffee690eaa1 ("examples/bbdev: add sample app")
Cc: stable@dpdk.org

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: David Marchand <david.marchand@redhat.com>

show more ...

examples/bbdev: switch to dynamic mbuf field

The example used the deprecated mbuf field udata64 as input mbuf pointer.
It is moved to a dynamic field in order to allow removal of udata64.

Signed-of

examples/bbdev: switch to dynamic mbuf field

The example used the deprecated mbuf field udata64 as input mbuf pointer.
It is moved to a dynamic field in order to allow removal of udata64.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>

show more ...

examples: enclose DPDK includes with angle brackets

In examples, DPDK header files are external,
so they must be enclosed with angle brackets, not quotes.

Signed-off-by: Thomas Monjalon <thomas@mon

examples: enclose DPDK includes with angle brackets

In examples, DPDK header files are external,
so they must be enclosed with angle brackets, not quotes.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>

show more ...

eal: rename lcore master and slave

Replace master lcore with main lcore and
replace slave lcore with worker lcore.

Keep the old functions and macros but mark them as deprecated
for this release.

T

eal: rename lcore master and slave

Replace master lcore with main lcore and
replace slave lcore with worker lcore.

Keep the old functions and macros but mark them as deprecated
for this release.

The "--master-lcore" command line option is also deprecated
and any usage will print a warning and use "--main-lcore"
as replacement.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>

show more ...

examples: use new link status print format

Add usage of rte_eth_link_to_str function to example
applications.

Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Reviewed-by: Ferruh Yigit <ferruh.yig

examples: use new link status print format

Add usage of rte_eth_link_to_str function to example
applications.

Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

examples: add flush after stats printing

When printf()'s stdout is line-buffered for terminal, it is fully
buffered for pipes. So, stdout listener can only get the output
when it is flushed (on prog

examples: add flush after stats printing

When printf()'s stdout is line-buffered for terminal, it is fully
buffered for pipes. So, stdout listener can only get the output
when it is flushed (on program termination, when buffer is filled or
manual flush).

stdout buffer might fill slowly since every stats report could be small.

Also when it is fully filled it might contain a part of the last stats
report which makes it very inconvenient for any automation which reads
and parses the output.

Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org

Signed-off-by: Georgiy Levashov <georgiy.levashov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>

show more ...

examples: check status of getting MAC address

The return value of rte_eth_macaddr_get() was changed from void to int.
Update the usage of the functions according to the new return type.

Signed-off-

examples: check status of getting MAC address

The return value of rte_eth_macaddr_get() was changed from void to int.
Update the usage of the functions according to the new return type.

Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>

show more ...

examples: check status of getting link info

The return value of rte_eth_link_get() and rte_eth_link_get_nowait()
was changed from void to int. Update the usage of the functions
according to the new

examples: check status of getting link info

The return value of rte_eth_link_get() and rte_eth_link_get_nowait()
was changed from void to int. Update the usage of the functions
according to the new return type.

Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>

show more ...

examples: take promiscuous mode switch result into account

rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these f

examples: take promiscuous mode switch result into account

rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across examples according to new return type.

Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>

show more ...

net: add rte prefix to ether defines

Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_C

net: add rte prefix to ether defines

Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.

Do not update the command line library to avoid adding a dependency to
librte_net.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

net: add rte prefix to ether structures

Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_

net: add rte prefix to ether structures

Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.

Do not update the command line library to avoid adding a dependency to
librte_net.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...