raw/ifpga/base: update flash operation interface

In N6000 ADP platform, SPI protocol, master and QSPI flash are
transparent to host software. The SPI master implemented in PMCI
automatically convert

raw/ifpga/base: update flash operation interface

In N6000 ADP platform, SPI protocol, master and QSPI flash are
transparent to host software. The SPI master implemented in PMCI
automatically converts the mailbox commands to the SPI protocol
required by SPI slave.
That means flash operation is different from old platform, new
interfaces are introduced to adapt these changes.

Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>

show more ...

raw/ifpga: support OFS card probing

PAC N6000 is the first OFS platform, its device id is added to ifpga
device support list.

Previous FPGA platform like Intel PAC N3000 and N5000, FME DFL (Device

raw/ifpga: support OFS card probing

PAC N6000 is the first OFS platform, its device id is added to ifpga
device support list.

Previous FPGA platform like Intel PAC N3000 and N5000, FME DFL (Device
Feature List) starts from BAR0 by default, port DFL location is indicated
in PORTn_OFFSET register in FME. In OFS implementation, FME DFL and port
DFL location can be defined individually in PCIe VSEC (Vendor Specific
Extended Capabilities). In this patch, DFL definition is searched in VSEC,
the legacy DFL is used only when DFL VSEC is not present.

In original DFL enumeration process, AFU is expected to locate in port DFL,
but this is not the case in OFS implementation. In this patch, enumeration
can search AFU in any PF/VF which has no FME and port.

Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>

show more ...

raw/ifpga: add APIs to get FPGA information

There are some information data can be got from FPGA, they are
implemented in below APIs:
1. rte_pmd_ifpga_get_property() get properties of FPGA (include

raw/ifpga: add APIs to get FPGA information

There are some information data can be got from FPGA, they are
implemented in below APIs:
1. rte_pmd_ifpga_get_property() get properties of FPGA (include BMC).
2. rte_pmd_ifpga_get_phy_info() get information of PHY connect to FPGA.
3. rte_pmd_ifpga_get_rsu_status() get status of rsu process.

Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>

show more ...

raw/ifpga: add FPGA RSU APIs

RSU (Remote System Update) depends on secure manager which may be
different on various implementations, so a new secure manager device
is implemented for adapting such d

raw/ifpga: add FPGA RSU APIs

RSU (Remote System Update) depends on secure manager which may be
different on various implementations, so a new secure manager device
is implemented for adapting such difference.
There are five APIs added:
1. rte_pmd_ifpga_get_dev_id() get raw device ID of ifpga device from PCI
address like 'Domain:Bus:Dev.Func'.
2. rte_pmd_ifpga_update_flash() update flash with specific image file.
3. rte_pmd_ifpga_stop_update() abort flash update process.
4. rte_pmd_ifpga_reboot_try() check current ifpga status and change it
to reboot status if it is idle.
5. rte_pmd_ifpga_reload() trigger full reconfiguration of ifpga device.

Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>

show more ...

raw/ifpga/base: free resources when destroying device

Add two functions to complete the resource free work, one is
'ifpga_adapter_destroy()', the other is 'ifpga_bus_uinit()'.

Then call 'opae_adapt

raw/ifpga/base: free resources when destroying device

Add two functions to complete the resource free work, one is
'ifpga_adapter_destroy()', the other is 'ifpga_bus_uinit()'.

Then call 'opae_adapter_destroy()' and 'opae_adapter_data_free()'
in 'ifpga_rawdev_close()' to free resources.

Also 'opae_adapter_free()' is removed from 'ifpga_rawdev_destroy()',
because opae adapter is pointed by dev_private member in raw_dev,
it will be freed in 'rte_rawdev_pmd_release()'.

Signed-off-by: Wei Huang <wei.huang@intel.com>
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>

show more ...

raw/ifpga/base: get board info

Add new API to get the board info.
opae_mgr_get_board_info()

Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>

raw/ifpga/base: introduce sensor functions

Introducing sensor APIs to PMD driver for PAC N3000 card.

Those sensor APIs:
1. opae_mgr_for_each_sensor()
2. opae_mgr_get_sensor_by_name()
3. opae_mgr_ge

raw/ifpga/base: introduce sensor functions

Introducing sensor APIs to PMD driver for PAC N3000 card.

Those sensor APIs:
1. opae_mgr_for_each_sensor()
2. opae_mgr_get_sensor_by_name()
3. opae_mgr_get_sensor_by_id()
4. opae_mgr_get_sensor_value_by_name()
5. opae_mgr_get_sensor_value_by_id()
6. opae_mgr_get_sensor_value()

Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>

show more ...

drivers/raw: remove rawdev from directory names

The ifpga and skeleton rawdev drivers included "rawdev" in their directory
names, which was superfluous given that they were in the drivers/raw
direct

drivers/raw: remove rawdev from directory names

The ifpga and skeleton rawdev drivers included "rawdev" in their directory
names, which was superfluous given that they were in the drivers/raw
directory. Shorten the names via this patch.

For meson builds, this will rename the final library .so/.a files
produced, but those will be renamed again later via a patch to
standardize rawdev names.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>

show more ...