net/thunderx: fix memory leak on rbdr desc ring failure

In nicvf_qset_rbdr_alloc(), we allocate memory for the 'rbdr'
structure but not released when allocate 'rbdr desc ring' fails.

Fixes: 7413fee

net/thunderx: fix memory leak on rbdr desc ring failure

In nicvf_qset_rbdr_alloc(), we allocate memory for the 'rbdr'
structure but not released when allocate 'rbdr desc ring' fails.

Fixes: 7413feee662d ("net/thunderx: add device start/stop and close")
Cc: stable@dpdk.org

Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

show more ...

ethdev: add device flag to bypass auto-filled queue xstats

Queue stats are stored in 'struct rte_eth_stats' as array and array size
is defined by 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag.

As

ethdev: add device flag to bypass auto-filled queue xstats

Queue stats are stored in 'struct rte_eth_stats' as array and array size
is defined by 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag.

As a result of technical board discussion, decided to remove the queue
statistics from 'struct rte_eth_stats' in the long term.

Instead PMDs should represent the queue statistics via xstats, this
gives more flexibility on the number of the queues supported.

Currently queue stats in the xstats are filled by ethdev layer, using
some basic stats, when queue stats removed from basic stats the
responsibility to fill the relevant xstats will be pushed to the PMDs.

During the switch period, temporary 'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS'
device flag is created. Initially all PMDs using xstats set this flag.
The PMDs implemented queue stats in the xstats should clear the flag.

When all PMDs switch to the xstats for the queue stats, queue stats
related fields from 'struct rte_eth_stats' will be removed, as well as
'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS' flag.
Later 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag also can be
removed.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>

show more ...

ethdev: change stop operation callback to return int

Change eth_dev_stop_t return value from void to int.
Make eth_dev_stop_t implementations across all drivers to return
negative errno values if ca

ethdev: change stop operation callback to return int

Change eth_dev_stop_t return value from void to int.
Make eth_dev_stop_t implementations across all drivers to return
negative errno values if case of error conditions.

Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

ethdev: remove forcing stopped state upon close

When closing a port, it is supposed to be already stopped,
and marked as such with "dev_started" state zeroed by the stop API.

Resetting "dev_started

ethdev: remove forcing stopped state upon close

When closing a port, it is supposed to be already stopped,
and marked as such with "dev_started" state zeroed by the stop API.

Resetting "dev_started" before calling the driver close operation
was hiding the case of not properly stopped port being closed.
The flag "dev_started" is not changed anymore in "rte_eth_dev_close()".

In case the "dev_stop" function is called from "dev_close",
bypassing "rte_eth_dev_stop()" API,
the "dev_started" state must be explicitly reset in the PMD
in order to keep the same behaviour.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>

show more ...

drivers/net: check process type in close operation

The secondary processes are not allowed to release shared resources.
Only process-private resources should be freed in a secondary process.
Most of

drivers/net: check process type in close operation

The secondary processes are not allowed to release shared resources.
Only process-private resources should be freed in a secondary process.
Most of the time, there is no process-private resource,
so the close operation is just forbidden in a secondary process.

After adding proper check in the port close functions,
some redundant checks in the device remove functions are dropped.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>

show more ...

ethdev: allow drivers to return error on close

The device operation .dev_close was returning void.
This driver interface is changed to return an int.

Note that the API rte_eth_dev_close() is still

ethdev: allow drivers to return error on close

The device operation .dev_close was returning void.
This driver interface is changed to return an int.

Note that the API rte_eth_dev_close() is still returning void,
although a deprecation notice is pending to change it as well.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>

show more ...

ethdev: remove underscore prefix from internal API

'_rte_eth_dev_callback_process()' & '_rte_eth_dev_reset()' internal APIs
has unconventional underscore ('_') prefix.
Although this is not documente

ethdev: remove underscore prefix from internal API

'_rte_eth_dev_callback_process()' & '_rte_eth_dev_reset()' internal APIs
has unconventional underscore ('_') prefix.
Although this is not documented most probably this is to mark them as
internal. Since we have '__rte_internal' flag to mark this, removing '_'
from API names.

For '_rte_eth_dev_reset()', there is already a public API named
'rte_eth_dev_reset()', so renaming '_rte_eth_dev_reset()' to
'rte_eth_dev_internal_reset'.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>

show more ...

ethdev: move inline device operations

This patch is a preparation to hide the 'struct eth_dev_ops' from
applications by moving some device operations from 'struct eth_dev_ops'
to 'struct rte_eth_dev

ethdev: move inline device operations

This patch is a preparation to hide the 'struct eth_dev_ops' from
applications by moving some device operations from 'struct eth_dev_ops'
to 'struct rte_eth_dev'.

Mentioned ethdev APIs are in the data path and implemented as inline
because of performance reasons.

Exposing 'struct eth_dev_ops' to applications is bad because it is a
contract between ethdev and PMDs, not really needs to be known by
applications, also changes in the struct causing ABI breakages which
shouldn't.

To be able to both keep APIs inline and hide the 'struct eth_dev_ops',
moving device operations used in ethdev inline APIs to 'struct
rte_eth_dev' to the same level with Rx/Tx burst functions.

The list of dev_ops moved:
eth_rx_queue_count_t rx_queue_count;
eth_rx_descriptor_done_t rx_descriptor_done;
eth_rx_descriptor_status_t rx_descriptor_status;
eth_tx_descriptor_status_t tx_descriptor_status;

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>

show more ...

log: introduce logtype register macro

Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.

It is a wrapper macro for declaring the logtype, regist

log: introduce logtype register macro

Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.

It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.

Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

show more ...

net/thunderx: use dynamic log type

The PMD static logtype is original DPDK legacy and should not be used.

Fixes: 43362c6a7647 ("net/thunderx: support RSS and RETA query and update")
Cc: stable@dpdk

net/thunderx: use dynamic log type

The PMD static logtype is original DPDK legacy and should not be used.

Fixes: 43362c6a7647 ("net/thunderx: support RSS and RETA query and update")
Cc: stable@dpdk.org

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

net/thunderx: support link up and down

Add support for .set_link_up/down() eth ops to bring
link up and down.

Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.

net/thunderx: support link up and down

Add support for .set_link_up/down() eth ops to bring
link up and down.

Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

show more ...

drivers/net: fix RSS hash offload flag if no RSS

By default RSS hash delivery (offload) is bound to RSS mode and
it is incorrect to advertise it as enabled if Rx multi-queue mode
has no RSS.

Fixes:

drivers/net: fix RSS hash offload flag if no RSS

By default RSS hash delivery (offload) is bound to RSS mode and
it is incorrect to advertise it as enabled if Rx multi-queue mode
has no RSS.

Fixes: 8b945a7f7dcb ("drivers/net: update Rx RSS hash offload capabilities")

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

drivers/net: update Rx RSS hash offload capabilities

Add DEV_RX_OFFLOAD_RSS_HASH flag for all PMDs that support RSS hash
delivery.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed

drivers/net: update Rx RSS hash offload capabilities

Add DEV_RX_OFFLOAD_RSS_HASH flag for all PMDs that support RSS hash
delivery.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

ethdev: make stats and xstats reset callbacks return int

Change return value of the callbacks from void to int. Make
implementations across all drivers return negative errno
values in case of error

ethdev: make stats and xstats reset callbacks return int

Change return value of the callbacks from void to int. Make
implementations across all drivers return negative errno
values in case of error conditions.

Both callbacks are updated together because a large number of
drivers assign the same function to both callbacks.

Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

ethdev: change promiscuous callbacks to return status

Enabling/disabling of promiscuous mode is not always successful and
it should be taken into account to be able to handle it properly.

When corr

ethdev: change promiscuous callbacks to return status

Enabling/disabling of promiscuous mode is not always successful and
it should be taken into account to be able to handle it properly.

When correct return status is unclear from driver code, -EAGAIN is used.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>

show more ...

ethdev: change device info get callback to return int

Change eth_dev_infos_get_t return value from void to int.
Make eth_dev_infos_get_t implementations across all drivers to return
negative errno v

ethdev: change device info get callback to return int

Change eth_dev_infos_get_t return value from void to int.
Make eth_dev_infos_get_t implementations across all drivers to return
negative errno values if case of error conditions.

Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

net/thunderx: fix crash on detach

Fix the PCIe detach segfault by releasing eth_dev resources
by adding nicvf cleanup support on PCI detach.

Fixes: fdf91e0f2fac ("drivers/net: do not use ethdev dri

net/thunderx: fix crash on detach

Fix the PCIe detach segfault by releasing eth_dev resources
by adding nicvf cleanup support on PCI detach.

Fixes: fdf91e0f2fac ("drivers/net: do not use ethdev driver")
Cc: stable@dpdk.org

Signed-off-by: Amit Gupta <agupta3@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

show more ...

drivers/net: fix double free on init failure

If we don't clear mac_addrs, ethdev will double free it on cleanup.

Fixes: e16adf08e54d ("ethdev: free all common data when releasing port")
Cc: stable@

drivers/net: fix double free on init failure

If we don't clear mac_addrs, ethdev will double free it on cleanup.

Fixes: e16adf08e54d ("ethdev: free all common data when releasing port")
Cc: stable@dpdk.org

Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

net: add rte prefix to ether defines

Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_C

net: add rte prefix to ether defines

Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.

Do not update the command line library to avoid adding a dependency to
librte_net.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

net: add rte prefix to ether functions

Add 'rte_' prefix to functions:
- rename is_same_ether_addr() as rte_is_same_ether_addr().
- rename is_zero_ether_addr() as rte_is_zero_ether_addr().
- rename

net: add rte prefix to ether functions

Add 'rte_' prefix to functions:
- rename is_same_ether_addr() as rte_is_same_ether_addr().
- rename is_zero_ether_addr() as rte_is_zero_ether_addr().
- rename is_unicast_ether_addr() as rte_is_unicast_ether_addr().
- rename is_multicast_ether_addr() as rte_is_multicast_ether_addr().
- rename is_broadcast_ether_addr() as rte_is_broadcast_ether_addr().
- rename is_universal_ether_addr() as rte_is_universal_ether_addr().
- rename is_local_admin_ether_addr() as rte_is_local_admin_ether_addr().
- rename is_valid_assigned_ether_addr() as rte_is_valid_assigned_ether_addr().
- rename eth_random_addr() as rte_eth_random_addr().
- rename ether_addr_copy() as rte_ether_addr_copy().
- rename ether_format_addr() as rte_ether_format_addr().

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

net: add rte prefix to ether structures

Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_

net: add rte prefix to ether structures

Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.

Do not update the command line library to avoid adding a dependency to
librte_net.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

ethdev: make default behavior CRC strip on Rx

Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.

PMDs that support keepin

ethdev: make default behavior CRC strip on Rx

Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.

PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.

Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>

show more ...

net/thunderx: support Rx VLAN offload

This feature is used to offload stripping of VLAN header from received
packets and update vlan_tci field in mbuf when
DEV_RX_OFFLOAD_VLAN_STRIP & ETH_VLAN_STRIP

net/thunderx: support Rx VLAN offload

This feature is used to offload stripping of VLAN header from received
packets and update vlan_tci field in mbuf when
DEV_RX_OFFLOAD_VLAN_STRIP & ETH_VLAN_STRIP_MASK flag is set.

Signed-off-by: Rakesh Kudurumalla <rkudurumalla@caviumnetworks.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

show more ...

net/thunderx: enable Rx checksum offload

Add L3/L4 Rx checksum offload and update capabilities.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@c

net/thunderx: enable Rx checksum offload

Add L3/L4 Rx checksum offload and update capabilities.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

show more ...

remove useless constructor headers

A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the fu

remove useless constructor headers

A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the function definition.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>

show more ...