net/qede/base: rename HSI datatypes and functions

This patch changes code with E4/E5/e4/e5/BB_K2 prefixes and suffixes.
- HSI datatypes renaming - removed all e5 datatypes and renamed
all e4 dat

net/qede/base: rename HSI datatypes and functions

This patch changes code with E4/E5/e4/e5/BB_K2 prefixes and suffixes.
- HSI datatypes renaming - removed all e5 datatypes and renamed
all e4 datatypes to be prefix less/suffix less.
(s/_E4//; s/_e4//; s/E4_//).
- HSI functions - removed e4/e5 prefixes/suffixes.

Signed-off-by: Rasesh Mody <rmody@marvell.com>

show more ...

net/qede/base: fix MFW FLR flow

Management firmware does not properly clean IGU block in PF FLR flow
which may result in undelivered attentions for link events from
default status block.
Add a worka

net/qede/base: fix MFW FLR flow

Management firmware does not properly clean IGU block in PF FLR flow
which may result in undelivered attentions for link events from
default status block.
Add a workaround in PMD to execute extra IGU cleanup right after PF FLR
is done.

Fixes: 9e2f08a4ad5f ("net/qede/base: add request for PF FLR before load request")
Cc: stable@dpdk.org

Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>

show more ...

net/qede: move SPDX tags to source files

We were using LICENSE.qede_pmd to reference inclusion of SPDX licensing
tag from all the source file. Remove the LICENSE.qede_pmd file and
directly include S

net/qede: move SPDX tags to source files

We were using LICENSE.qede_pmd to reference inclusion of SPDX licensing
tag from all the source file. Remove the LICENSE.qede_pmd file and
directly include SPDX tags in source files.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

show more ...

net/qede: change copyright info to Cavium

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: reduce verbosity in HW init log

Reduce the verbosity in ecore_pglueb_rbc_attn_handler() while logging
errmsg during HW init. This could happen due to ungraceful exit of
previous drive

net/qede/base: reduce verbosity in HW init log

Reduce the verbosity in ecore_pglueb_rbc_attn_handler() while logging
errmsg during HW init. This could happen due to ungraceful exit of
previous driver instance.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

show more ...

net/qede/base: update firmware to 8.30.12.0

Upgrade QEDE PMD FW to version 8.30.12.0.

The firmware upgrade change details are as:
- Add support for steering by IP and UDP destination port.
- Add

net/qede/base: update firmware to 8.30.12.0

Upgrade QEDE PMD FW to version 8.30.12.0.

The firmware upgrade change details are as:
- Add support for steering by IP and UDP destination port.
- Add source QP field for GSI offload.
- Add UFP support.
- Add support for outer IPv4 TX CSO with unknown tunnel type (in addition
to inner header CSO).
- Support flow ID in accelerated RFS flow.
- Allow Doorbell on empty SPQ and LL2 TX queue (for doorbell recovery).
- Enable PCI Relaxed Ordering for L2 RX data placement.
- Additional enhancements and bug fixes

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

show more ...

net/qede/base: interchangeably use SB between PF and VF

Status Block reallocation - allow a PF and its child VF to change SB
between them using new base driver APIs.

The changes that are inside bas

net/qede/base: interchangeably use SB between PF and VF

Status Block reallocation - allow a PF and its child VF to change SB
between them using new base driver APIs.

The changes that are inside base driver flows are:

New APIs ecore_int_igu_reset_cam() and ecore_int_igu_reset_cam_default()
added to reset IGU CAM.
a. During hw_prepare(), driver would re-initialize the IGU CAM.
b. During hw_stop(), driver would initialize the IGU CAM to default.

Use igu_sb_id instead of sb_idx [protocol index] to allow setting of
the timer-resolution in CAU[coalescing algorithm unit] for all SBs,
sb_idx could limit SBs 0-11 only to be able change their timer-resolution.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

show more ...

net/qede/base: fix recovery from previous ungraceful exit

This patch modifies the recovery flow to allow ongoing PCIe
transactions to be completed. To achieve this, the load sequence is
changed such

net/qede/base: fix recovery from previous ungraceful exit

This patch modifies the recovery flow to allow ongoing PCIe
transactions to be completed. To achieve this, the load sequence is
changed such that the "final_cleanup" notification is sent while the
FID_enable is cleared.
This change ensures that the chip cleanup actions takes place from
previous driver instance if needed.

Fixes: ec94dbc57362 ("qede: add base driver")
Cc: stable@dpdk.org

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

show more ...

net/qede/base: make L2 queues handle based

L2 handler changes:

This is change to remove the queue-id/qzone difference for Tx queues.

It does that by mainly doing:

a. VFs queues are no longer dete

net/qede/base: make L2 queues handle based

L2 handler changes:

This is change to remove the queue-id/qzone difference for Tx queues.

It does that by mainly doing:

a. VFs queues are no longer determined by the SBs they're using.
Instead, the ecore-client needs to maintain those and choose the values
to be used by VF when initializing it.

b. Eliminate the HW-cid array in the hw-function.
To do that, have all the rx/tx functionality turn into 'handle' base -
when queue would be started the caller would get a (void*) handle,
which it would later use with ecore for configuring various
queue-related stop [update, close].

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

show more ...

net/qede/base: update

This patch updates the base driver and incorporates necessary changes
required to bring in the new firmware 8.10.9.0.

In addition, it would allow driver to add new functionali

net/qede/base: update

This patch updates the base driver and incorporates necessary changes
required to bring in the new firmware 8.10.9.0.

In addition, it would allow driver to add new functionalities that might
be needed in future.

Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>

show more ...

net/qede/base: formatting changes

Fixes white spaces and tabs.

Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>

qede: add base driver

The base driver is the backend module for the QLogic FastLinQ QL4xxxx
25G/40G CNA family of adapters as well as their virtual functions (VF)
in SR-IOV context.

The purpose of

qede: add base driver

The base driver is the backend module for the QLogic FastLinQ QL4xxxx
25G/40G CNA family of adapters as well as their virtual functions (VF)
in SR-IOV context.

The purpose of the base module is to:
- provide all the common code that will be shared between the various
drivers that would be used with said line of products. Flows such as
chip initialization and de-initialization fall under this category.
- abstract the protocol-specific HW & FW components, allowing the
protocol drivers to have clean APIs, which are detached in its
slowpath configuration from the actual Hardware Software Interface(HSI).

This patch adds a base module without any protocol-specific bits.
I.e., this adds a basic implementation that almost entirely falls under
the first category.

Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>

show more ...