net/qede/base: add changes for debug data collection

This patch adds base driver APIs required for debug data collection.
It adds support for dumping internal lookup tables(ilt), reading nvram
image

net/qede/base: add changes for debug data collection

This patch adds base driver APIs required for debug data collection.
It adds support for dumping internal lookup tables(ilt), reading nvram
image, register definitions.

Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>

show more ...

net/qede/base: update FW to 8.40.33.0

In our testing we have identified a critical FW bug. Performance
is degraded significantly for certain packet sizes with 8.40.25.0 FW.

This patch updates the F

net/qede/base: update FW to 8.40.33.0

In our testing we have identified a critical FW bug. Performance
is degraded significantly for certain packet sizes with 8.40.25.0 FW.

This patch updates the FW to version 8.40.33.0. The updated FW has a
fix to performance issue.

The patch also adds initialization for FW overlay RAM as part of
hardware initialization which is required by the new FW.

Fixes: 3b307c55f2ac ("net/qede/base: update FW to 8.40.25.0")
Cc: stable@dpdk.org

Signed-off-by: Rasesh Mody <rmody@marvell.com>

show more ...

net/qede/base: update HSI

Update hardware software common base driver code in preparation to
update the firmware to version 8.40.25.0.

Signed-off-by: Rasesh Mody <rmody@marvell.com>

net/qede/base: rename HSI datatypes and functions

This patch changes code with E4/E5/e4/e5/BB_K2 prefixes and suffixes.
- HSI datatypes renaming - removed all e5 datatypes and renamed
all e4 dat

net/qede/base: rename HSI datatypes and functions

This patch changes code with E4/E5/e4/e5/BB_K2 prefixes and suffixes.
- HSI datatypes renaming - removed all e5 datatypes and renamed
all e4 datatypes to be prefix less/suffix less.
(s/_E4//; s/_e4//; s/E4_//).
- HSI functions - removed e4/e5 prefixes/suffixes.

Signed-off-by: Rasesh Mody <rmody@marvell.com>

show more ...

drivers/net: fix shifting 32-bit signed variable 31 times

Shifting signed 32-bit values by 31-bits has the potential for
unexpected outcomes as compiler can overwrite a bit.
Specified that values a

drivers/net: fix shifting 32-bit signed variable 31 times

Shifting signed 32-bit values by 31-bits has the potential for
unexpected outcomes as compiler can overwrite a bit.
Specified that values are unsigned.

Errors are observed from running cppcheck.

Bugzilla ID: 58
Fixes: 69e209be5464 ("net/axgbe: add register map and related macros")
Fixes: b5bf7719221d ("bnx2x: driver support routines")
Fixes: ed2ced6fe927 ("net/bnxt: check initialization before accessing stats")
Fixes: 6fda3f0ddda9 ("net/cxgbe: add API to program hardware MPS table")
Fixes: bdb244b96920 ("e1000: whitespace changes")
Fixes: 5a32a257f957 ("e1000: more NICs in base driver")
Fixes: 2fe669f4bcd2 ("net/nfp: support MAC address change")
Fixes: defb9a5dd156 ("nfp: introduce driver initialization")
Fixes: ec94dbc57362 ("qede: add base driver")
Fixes: d2e7d931d0ad ("net/qede/base: formatting changes")
Fixes: cdc07e83bb24 ("net/tap: add eBPF program file")
Cc: stable@dpdk.org

Signed-off-by: Andrius Sirvys <andrius.sirvys@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

net/qede/base: upgrade to FW 8.37.7.0

This patch adds changes to base driver for upgrading to 8.37.3.0 FW.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede: move SPDX tags to source files

We were using LICENSE.qede_pmd to reference inclusion of SPDX licensing
tag from all the source file. Remove the LICENSE.qede_pmd file and
directly include S

net/qede: move SPDX tags to source files

We were using LICENSE.qede_pmd to reference inclusion of SPDX licensing
tag from all the source file. Remove the LICENSE.qede_pmd file and
directly include SPDX tags in source files.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

show more ...

net/qede: change copyright info to Cavium

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: upgrade FW to 8.33.12.0

This patch adds changes to support new firmware 8.33.12.0. The changes
consist of FW bug fixes and enhancements.

Signed-off-by: Rasesh Mody <rasesh.mody@caviu

net/qede/base: upgrade FW to 8.33.12.0

This patch adds changes to support new firmware 8.33.12.0. The changes
consist of FW bug fixes and enhancements.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

show more ...

net/qede/base: update firmware to 8.30.12.0

Upgrade QEDE PMD FW to version 8.30.12.0.

The firmware upgrade change details are as:
- Add support for steering by IP and UDP destination port.
- Add

net/qede/base: update firmware to 8.30.12.0

Upgrade QEDE PMD FW to version 8.30.12.0.

The firmware upgrade change details are as:
- Add support for steering by IP and UDP destination port.
- Add source QP field for GSI offload.
- Add UFP support.
- Add support for outer IPv4 TX CSO with unknown tunnel type (in addition
to inner header CSO).
- Support flow ID in accelerated RFS flow.
- Allow Doorbell on empty SPQ and LL2 TX queue (for doorbell recovery).
- Enable PCI Relaxed Ordering for L2 RX data placement.
- Additional enhancements and bug fixes

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

show more ...

net/qede/base: change verbosity

Change verbosity of events related to malicious VFs to DP_NOTICE
from DP_INFO. They are not just informational events.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium

net/qede/base: change verbosity

Change verbosity of events related to malicious VFs to DP_NOTICE
from DP_INFO. They are not just informational events.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

show more ...

net/qede/base: upgrade the FW to 8.20.0.0

This patch adds changes to upgrade to 8.20.0.0 FW.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede: upgrade the FW to 8.18.9.0

This patchset adds changes to upgrade to 8.18.9.0 FW.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: utilize FW 8.18.9.0

This change is in preparation to work with new FW 8.18.9.0.
Rename the defines to use E4_ and structs to use e4_. This renaming
is to add support for future chipse

net/qede/base: utilize FW 8.18.9.0

This change is in preparation to work with new FW 8.18.9.0.
Rename the defines to use E4_ and structs to use e4_. This renaming
is to add support for future chipsets.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

show more ...

net/qede/base: semantic/formatting changes

This patch consists of semantic/formatting changes. It also includes
comment additions.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

net/qede/base: add support for new firmware

Add support for 8.14.x.x firmware.

The new firmware adds support for external PHY BCM8485x; configures
fixed link speed with transceiver/cable not suppor

net/qede/base: add support for new firmware

Add support for 8.14.x.x firmware.

The new firmware adds support for external PHY BCM8485x; configures
fixed link speed with transceiver/cable not supporting negotiation;
supports engine swap; supports overriding PCIe preset equalization
value; checks pause too long for ports and reads die temperature
every second for shutdown threshold.
It includes change in FLR flow when there is a SW initiated FLR.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>

show more ...

net/qede/base: add HSI changes and register defines

- add the hardware software interface(HSI) changes
- add register definitions

These will be required for 8.10.9.0 FW upgrade.

Signed-off-by: Ras

net/qede/base: add HSI changes and register defines

- add the hardware software interface(HSI) changes
- add register definitions

These will be required for 8.10.9.0 FW upgrade.

Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>

show more ...

net/qede/base: formatting changes

Fixes white spaces and tabs.

Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>

qede: add base driver

The base driver is the backend module for the QLogic FastLinQ QL4xxxx
25G/40G CNA family of adapters as well as their virtual functions (VF)
in SR-IOV context.

The purpose of

qede: add base driver

The base driver is the backend module for the QLogic FastLinQ QL4xxxx
25G/40G CNA family of adapters as well as their virtual functions (VF)
in SR-IOV context.

The purpose of the base module is to:
- provide all the common code that will be shared between the various
drivers that would be used with said line of products. Flows such as
chip initialization and de-initialization fall under this category.
- abstract the protocol-specific HW & FW components, allowing the
protocol drivers to have clean APIs, which are detached in its
slowpath configuration from the actual Hardware Software Interface(HSI).

This patch adds a base module without any protocol-specific bits.
I.e., this adds a basic implementation that almost entirely falls under
the first category.

Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>

show more ...