net/mlx5: fix tunneling support query

Currently, the PMD decides if the tunneling offload
can enable VXLAN/GRE/GENEVE tunneled TSO support by checking
config->tunnel_en (single bit) and config->tso.

net/mlx5: fix tunneling support query

Currently, the PMD decides if the tunneling offload
can enable VXLAN/GRE/GENEVE tunneled TSO support by checking
config->tunnel_en (single bit) and config->tso.

This is incorrect, the right way is to check the following
flags returned by the mlx5dv_query_device function:

MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_VXLAN - if supported the offload
DEV_TX_OFFLOAD_VXLAN_TNL_TSO can be enabled.
MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_GRE - if supported the offload
DEV_TX_OFFLOAD_GRE_TNL_TSO can be enabled.
MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_GENEVE - if supported the offload
DEV_TX_OFFLOAD_GENEVE_TNL_TSO can be enabled.

The fix enables the offloads according to the correct
flags returned by the kernel.

Fixes: dbccb4cddcd2 ("net/mlx5: convert to new Tx offloads API")
Cc: stable@dpdk.org

Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Tested-by: Idan Hackmon <idanhac@nvidia.com>

show more ...

net/mlx5: fix software parsing support query

Currently, the PMD decides if the software parsing
offload can enable outer IPv4 checksum and tunneled
TSO support by checking config->hw_csum and config

net/mlx5: fix software parsing support query

Currently, the PMD decides if the software parsing
offload can enable outer IPv4 checksum and tunneled
TSO support by checking config->hw_csum and config->tso
respectively.

This is incorrect, the right way is to check the following
flags returned by the mlx5dv_query_device function:

MLX5DV_SW_PARSING - check general swp support.
MLX5DV_SW_PARSING_CSUM - check swp checksum support.
MLX5DV_SW_PARSING_LSO - check swp LSO/TSO support.

The fix enables the offloads according to the correct
flags returned by the kernel.

Fixes: e46821e9fcdc ("net/mlx5: separate generic tunnel TSO from the standard one")
Cc: stable@dpdk.org

Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Tested-by: Idan Hackmon <idanhac@nvidia.com>

show more ...

net/mlx5: support Sub-Function

Introduce SF support.
Similar to VF, SF on auxiliary bus is a portion of hardware PF,
no representor or bonding parameters for SF.

Devargs to support SF:
-a auxiliary

net/mlx5: support Sub-Function

Introduce SF support.
Similar to VF, SF on auxiliary bus is a portion of hardware PF,
no representor or bonding parameters for SF.

Devargs to support SF:
-a auxiliary:mlx5_core.sf.8,dv_flow_en=1

New global syntax to support SF:
-a bus=auxiliary,name=mlx5_core.sf.8/class=eth/driver=mlx5,dv_flow_en=1

Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>

show more ...

net/mlx5: migrate to bus-agnostic common interface

To support SubFunction based on auxiliary bus, common driver supports
new bus-agnostic driver.

This patch migrates net driver to new common driver

net/mlx5: migrate to bus-agnostic common interface

To support SubFunction based on auxiliary bus, common driver supports
new bus-agnostic driver.

This patch migrates net driver to new common driver.

Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>

show more ...

net/mlx5: support single flow dump

Modify API mlx5_flow_dev_dump to support the feature.
Modify mlx5_socket since one extra arg flow_ptr is added.

The data structure sent to DPDK application from t

net/mlx5: support single flow dump

Modify API mlx5_flow_dev_dump to support the feature.
Modify mlx5_socket since one extra arg flow_ptr is added.

The data structure sent to DPDK application from the utility triggering
the flow dumps should be packed and endianness must be specified.
The native host endianness can be used, all exchange happens within
the same host (we use sendmsg aux data and share the file handle,
remote approach is not applicable, no inter-host communication happens).

The message structure to dump one/all flow(s):
struct mlx5_flow_dump_req {
uint32_t port_id;
uint64_t flow_ptr;
} __rte_packed;

If flow_ptr is 0, all flows for the specified port will be dumped.

Signed-off-by: Haifei Luo <haifeil@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>

show more ...

net/mlx5: fix device name size on Windows

Windows Devx interface name is the same as device name with
different size then IF_NAMESIZE. To support it MLX5_NAMESIZE
is defined with IF_NAMESIZE value f

net/mlx5: fix device name size on Windows

Windows Devx interface name is the same as device name with
different size then IF_NAMESIZE. To support it MLX5_NAMESIZE
is defined with IF_NAMESIZE value for Linux and MLX5_FS_NAME_MAX
value for Windows.

Fixes: e9c0b96e3526 ("net/mlx5: move Linux ifname function")
Cc: stable@dpdk.org

Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

show more ...

net/mlx5: add macros for file name and path

ibdev_name and ibdev_path sizes are defined in Windows DevX
differently from the sizes used in Linux with
IBV_SYSFS_NAME_MAX and IBV_SYSFS_PATH_MAX.

Adde

net/mlx5: add macros for file name and path

ibdev_name and ibdev_path sizes are defined in Windows DevX
differently from the sizes used in Linux with
IBV_SYSFS_NAME_MAX and IBV_SYSFS_PATH_MAX.

Added MLX5_FS_NAME_MAX and MLX5_FS_NAME_PATH in mlx5_os.h for both OSs.

Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

show more ...

net/mlx5: move Linux ifname function

mlx5_get_ifname() prototype includes 'IF_NAMESIZE' definition from Linux
file net/if.h. Since this API is only used under Linux and to enable
compilation under n

net/mlx5: move Linux ifname function

mlx5_get_ifname() prototype includes 'IF_NAMESIZE' definition from Linux
file net/if.h. Since this API is only used under Linux and to enable
compilation under non-Linux OS - move this prototype from shared file
mlx5.h to file linux/mlx5_os.h.

Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>

show more ...

common/mlx5: move some getter functions from net driver

Getter functions such as: 'mlx5_os_get_ctx_device_name',
'mlx5_os_get_ctx_device_path', 'mlx5_os_get_dev_device_name',
'mlx5_os_get_umem_id' a

common/mlx5: move some getter functions from net driver

Getter functions such as: 'mlx5_os_get_ctx_device_name',
'mlx5_os_get_ctx_device_path', 'mlx5_os_get_dev_device_name',
'mlx5_os_get_umem_id' are implemented under net directory. To enable
additional devices (e.g. regex, vdpa) to access these getter functions
they are moved under common directory.

As part of this commit string sizes DEV_SYSFS_NAME_MAX and
DEV_SYSFS_PATH_MAX are increased by 1 to make sure that the destination
string size in strncpy() function is bigger than the source string size.
This update will avoid GCC version 8 error -Werror=stringop-truncation.

Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>

show more ...

net/mlx5: add Linux-specific header file

File drivers/net/linux/mlx5_os.h is added. It includes specific
Linux definitions such as PCI driver flags, link state changes
interrupts, link removal inter

net/mlx5: add Linux-specific header file

File drivers/net/linux/mlx5_os.h is added. It includes specific
Linux definitions such as PCI driver flags, link state changes
interrupts, link removal interrupts, etc.

Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>

show more ...