doc: improve ordering and remove old titles in prog guide

Move the "source_org" page to after overview, where it fits
better to explain the source-code layout of DPDK, before getting
into details of

doc: improve ordering and remove old titles in prog guide

Move the "source_org" page to after overview, where it fits
better to explain the source-code layout of DPDK, before getting
into details of specific libraries such as EAL.

Also removes the older titles from the 3 documents which still had them.

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>

show more ...

doc: fix driver names

Since the built driver filenames have changed in DPDK 20.11, we need to
update the driver doc to match.

Most drivers start their section with the driver filename highlighted i

doc: fix driver names

Since the built driver filenames have changed in DPDK 20.11, we need to
update the driver doc to match.

Most drivers start their section with the driver filename highlighted in
bold, while a number were missing the highlight. When updating the names,
add the markers for bold text to any missing it, so as to have things more
consistent.

Fixes: a20b2c01a7a1 ("build: standardize component names and defines")

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>

show more ...

build: remove makefiles

A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by

build: remove makefiles

A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.

[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html

Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>

show more ...

doc: remove file listings

No need to keep those file listings, they are very likely to become
outdated.

Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.y

doc: remove file listings

No need to keep those file listings, they are very likely to become
outdated.

Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>

show more ...

ethdev: rename folder to library name

Library folder name and output library name are same except a few flaws
including librte_ether.

This library is network device abstraction layer, the name "eth

ethdev: rename folder to library name

Library folder name and output library name are same except a few flaws
including librte_ether.

This library is network device abstraction layer, the name "ethdev" fits
better than "ether", and library & header files already named as ethdev.

Also there is a rte_ether.h in the net library which can cause confusion.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

show more ...

mbuf: remove control mbuf

The rte_ctrlmbuf structure is not used by any example application
in dpdk. Remove it, as announced on the mailing list.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com

mbuf: remove control mbuf

The rte_ctrlmbuf structure is not used by any example application
in dpdk. Remove it, as announced on the mailing list.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

show more ...

doc: convert Intel license headers to SPDX tags

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>

eal: remove Xen dom0 support

We remove xen-specific code in EAL, including the option --xen-dom0,
memory initialization code, compiling dependency, etc.

Related documents are removed or updated, an

eal: remove Xen dom0 support

We remove xen-specific code in EAL, including the option --xen-dom0,
memory initialization code, compiling dependency, etc.

Related documents are removed or updated, and bump the eal library
version.

Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>

show more ...

examples/dpdk-qat: remove app

Remove DPDK QAT sample app, in favour of the newer applications
that use the cryptodev library: ipsec-gw and l2fwd-crypto,
which has support for Intel QuickAssist devic

examples/dpdk-qat: remove app

Remove DPDK QAT sample app, in favour of the newer applications
that use the cryptodev library: ipsec-gw and l2fwd-crypto,
which has support for Intel QuickAssist devices.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>

show more ...

ivshmem: remove library and its EAL integration

Following discussions on the mailing list [1] and since nobody stood up to
implement the necessary cleanups, here is the ivshmem integration removal.

ivshmem: remove library and its EAL integration

Following discussions on the mailing list [1] and since nobody stood up to
implement the necessary cleanups, here is the ivshmem integration removal.

There is not much to say about this patch, a lot of code is being removed.
The default configuration file for packet_ordering example is replaced with
the "native" x86 file.
The only tricky part is in eal_memory with the memseg index stuff.

More cleanups can be done after this but will come in subsequent patchsets.

[1]: http://dpdk.org/ml/archives/dev/2016-June/040844.html

Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>

show more ...

szedata2: add new poll mode driver

Add virtual PMD which communicates with COMBO cards through sze2
layer using libsze2 library.

Since link_speed is uint16_t, there can not be used number for 100G

szedata2: add new poll mode driver

Add virtual PMD which communicates with COMBO cards through sze2
layer using libsze2 library.

Since link_speed is uint16_t, there can not be used number for 100G
speed, therefore link_speed is set to ETH_LINK_SPEED_10G until the
type of link_speed is solved.

Signed-off-by: Matej Vido <matejvido@gmail.com>

show more ...

mem: remove dummy malloc library

The malloc library is now part of the EAL.

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked

mem: remove dummy malloc library

The malloc library is now part of the EAL.

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>

show more ...

doc: add a prog guide note about driver base dirs

This patch updates the "Source Organisation" section of the
Programmers Guide to add an note that the code in the
drivers/net/pmd/base directories s

doc: add a prog guide note about driver base dirs

This patch updates the "Source Organisation" section of the
Programmers Guide to add an note that the code in the
drivers/net/pmd/base directories should not be modifed
by the user apart from the pmd_osdep.[ch] files.

Also fixes some grammar and rst issues in that section.

Signed-off-by: John McNamara <john.mcnamara@intel.com>

show more ...

cxgbe: add documentation

Adds cxgbe poll mode driver documentation under the usual doc/guides/nics/
directory with the rest of the drivers. The documentation covers cxgbe
implementation details, fe

cxgbe: add documentation

Adds cxgbe poll mode driver documentation under the usual doc/guides/nics/
directory with the rest of the drivers. The documentation covers cxgbe
implementation details, features and limitations, prerequisites,
configuration, and a sample application usage.

Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Acked-by: John McNamara <john.mcnamara@intel.com>

show more ...

xenvirt: move drivers/net/

Move xenvirt PMD to drivers/net directory

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas

xenvirt: move drivers/net/

Move xenvirt PMD to drivers/net directory

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>

show more ...

vmxnet3: move to drivers/net/

Move vmxnet3 PMD to drivers/net directory.
As part of the move, rename the "vmxnet3" subdirectory, containing the
original FreeBSD drivers, from "vmxnet3" to the more s

vmxnet3: move to drivers/net/

Move vmxnet3 PMD to drivers/net directory.
As part of the move, rename the "vmxnet3" subdirectory, containing the
original FreeBSD drivers, from "vmxnet3" to the more standard name
"base", to indicate it contains the base drivers used for the
implementation.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>

show more ...

virtio: move to drivers/net/

Move virtio PMD to drivers/net directory

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas

virtio: move to drivers/net/

Move virtio PMD to drivers/net directory

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>

show more ...

ring: move to drivers/net/

Move ring PMD to drivers directory

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalo

ring: move to drivers/net/

Move ring PMD to drivers directory

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>

show more ...

pcap: move drivers/net/

Move pcap pmd to drivers/net directory

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjal

pcap: move drivers/net/

Move pcap pmd to drivers/net directory

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>

show more ...

null: move to drivers/net/

Move null PMD to drivers/net directory

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Mon

null: move to drivers/net/

Move null PMD to drivers/net directory

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>

show more ...

mlx4: move to drivers/net/

move mlx4 PMD to drivers/net directory

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Mon

mlx4: move to drivers/net/

move mlx4 PMD to drivers/net directory

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>

show more ...

ixgbe: move to drivers/net/

move ixgbe PMD to drivers/net directory.
As part of the move, we rename the ixgbe directory, containing the
ixgbe "base driver" code, from "ixgbe" to "base".

Signed-off-

ixgbe: move to drivers/net/

move ixgbe PMD to drivers/net directory.
As part of the move, we rename the ixgbe directory, containing the
ixgbe "base driver" code, from "ixgbe" to "base".

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>

show more ...

i40e: move to drivers/net/

Move i40e PMD to drivers/net directory.
As part of the move, rename the "i40e" directory, containing the "base
driver" code, from "i40e" to "base".

Signed-off-by: Bruce R

i40e: move to drivers/net/

Move i40e PMD to drivers/net directory.
As part of the move, rename the "i40e" directory, containing the "base
driver" code, from "i40e" to "base".

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>

show more ...

fm10k: move to drivers/net/

move fm10k PMD to drivers/net directory

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas M

fm10k: move to drivers/net/

move fm10k PMD to drivers/net directory

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>

show more ...

enic: move to drivers/net/

move enic PMD to drivers/net directory

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
[Thomas: move vnic/

enic: move to drivers/net/

move enic PMD to drivers/net directory

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
[Thomas: move vnic/ to base/]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>

show more ...