app/eventdev: add pre-scheduling

Add support to configure pre-scheduling for eventdev
test application.
Option `--preschedule`
0 - Disable pre-scheduling.
1 - Enable pre-scheduling.
2 - Enable

app/eventdev: add pre-scheduling

Add support to configure pre-scheduling for eventdev
test application.
Option `--preschedule`
0 - Disable pre-scheduling.
1 - Enable pre-scheduling.
2 - Enable pre-schedule with adaptive mode (Default).

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

show more ...

app/eventdev: add DMA adapter performance test

Added performance test support for DMA adapter.

Signed-off-by: Amit Prakash Shukla <amitprakashs@marvell.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@

app/eventdev: add DMA adapter performance test

Added performance test support for DMA adapter.

Signed-off-by: Amit Prakash Shukla <amitprakashs@marvell.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>

show more ...

app/eventdev: use enqueue new event burst routine

Use the `rte_event_enqueue_new_burst` routine to enqueue events
with rte_event::op as RTE_EVENT_OP_NEW. This allows PMDs to use
optimized enqueue ro

app/eventdev: use enqueue new event burst routine

Use the `rte_event_enqueue_new_burst` routine to enqueue events
with rte_event::op as RTE_EVENT_OP_NEW. This allows PMDs to use
optimized enqueue routines.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Shijith Thotton <sthotton@marvell.com>

show more ...

app/eventdev: support non-null cipher algorithms

Testeventdev crypto adapter symmetric tests are only attempting
NULL cipher algorithm. This limits crypto adapter usage with only
PMDs that can suppo

app/eventdev: support non-null cipher algorithms

Testeventdev crypto adapter symmetric tests are only attempting
NULL cipher algorithm. This limits crypto adapter usage with only
PMDs that can support NULL cipher algorithm. Also, since NULL cipher
algorithm doesn't perform any crypto operation, the performance numbers
reported may not reflect the actual crypto capabilities of the device.
Extend the application to support non-NULL cipher algorithms.

Signed-off-by: Aakash Sasidharan <asasidharan@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

show more ...

eal: remove unneeded includes from a public header

Do not include <ctype.h>, <errno.h>, and <stdlib.h> from <rte_common.h>,
because they are not used by this file.
Include the needed headers directl

eal: remove unneeded includes from a public header

Do not include <ctype.h>, <errno.h>, and <stdlib.h> from <rte_common.h>,
because they are not used by this file.
Include the needed headers directly from the files that need them.

Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>

show more ...

app/eventdev: add Tx first option to pipeline mode

Add Tx first support to pipeline mode tests, the transmission is done
on all the ethernet ports. This helps in testing eventdev performance
with st

app/eventdev: add Tx first option to pipeline mode

Add Tx first support to pipeline mode tests, the transmission is done
on all the ethernet ports. This helps in testing eventdev performance
with standalone loopback interfaces.

Example:
./dpdk-test-eventdev ... -- ... --tx_first 512

512 defines the number of packets to transmit.
Add an option Tx packet size, the default packet size is 64.

Following example can change packet size value as 320.

Example:
./dpdk-test-eventdev ... -- ... --tx_first 512 --tx_pkt_sz 320

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

show more ...

app/eventdev: support asym ops for crypto adapter

Test eventdev app is updated to add new option for asymmetric
crypto ops for event crypto adapter.

Signed-off-by: Akhil Goyal <gakhil@marvell.com>

app/eventdev: support asym ops for crypto adapter

Test eventdev app is updated to add new option for asymmetric
crypto ops for event crypto adapter.

Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>

show more ...

app/eventdev: add crypto producer mode

In crypto producer mode, producer core enqueues cryptodev with software
generated crypto ops and worker core dequeues crypto completion events
from the eventde

app/eventdev: add crypto producer mode

In crypto producer mode, producer core enqueues cryptodev with software
generated crypto ops and worker core dequeues crypto completion events
from the eventdev. Event crypto metadata used for above processing is
pre-populated in each crypto session.

Parameter --prod_type_cryptodev can be used to enable crypto producer
mode. Parameter --crypto_adptr_mode can be set to select the crypto
adapter mode, 0 for OP_NEW and 1 for OP_FORWARD.

This mode can be used to measure the performance of crypto adapter.

Example:
./dpdk-test-eventdev -l 0-2 -w <EVENTDEV> -w <CRYPTODEV> -- \
--prod_type_cryptodev --crypto_adptr_mode 1 --test=perf_atq \
--stlist=a --wlcores 1 --plcores 2

Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>

show more ...

fix spelling in comments and strings

The tool comes from https://github.com/jsoref

Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>

app/eventdev: support burst enqueue

Introduce a new command line option prod_enq_burst_sz
to set burst size for eventdev enqueue at producer in perf_queue
test. The newly added function perf_produce

app/eventdev: support burst enqueue

Introduce a new command line option prod_enq_burst_sz
to set burst size for eventdev enqueue at producer in perf_queue
test. The newly added function perf_producer_burst is called when
prod_enq_burst_sz is greater than 1.

Signed-off-by: Rashmi Shetty <rashmi.shetty@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

show more ...

app/eventdev: add option to enable per port pool

Add option to configure unique mempool for each ethernet device
port. The new option available with `pipeline_atq` and
`pipeline_queue` tests.

Signe

app/eventdev: add option to enable per port pool

Add option to configure unique mempool for each ethernet device
port. The new option available with `pipeline_atq` and
`pipeline_queue` tests.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

show more ...

app/eventdev: fix overflow in lcore list parsing

Tainted and unvalidated integer 'idx' used as an index, which may
lead to buffer overflow.

This patch fixed it.

Fixes: 89e5eb118017 ("app/testevent

app/eventdev: fix overflow in lcore list parsing

Tainted and unvalidated integer 'idx' used as an index, which may
lead to buffer overflow.

This patch fixed it.

Fixes: 89e5eb118017 ("app/testeventdev: add string parsing helpers")
Cc: stable@dpdk.org

Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>

show more ...

app/eventdev: add vector mode in pipeline test

Add event vector support in pipeline tests. By default this mode
is disabled, it can be enabled by using the option --enable_vector.
example:
dpdk-tes

app/eventdev: add vector mode in pipeline test

Add event vector support in pipeline tests. By default this mode
is disabled, it can be enabled by using the option --enable_vector.
example:
dpdk-test-eventdev -l 7-23 -s 0xff00 -- --prod_type_ethdev
--nb_pkts=0 --verbose 2 --test=pipeline_atq --stlist=a
--wlcores=20-23 --enable_vector

Additional options to configure vector size and vector timeout are
also implemented and can be used by specifying --vector_size and
--vector_tmo_ns

This patch also adds a new option to set the number of Rx queues
configured per event eth rx adapter.
example:
dpdk-test-eventdev -l 7-23 -s 0xff00 -- --prod_type_ethdev
--nb_pkts=0 --verbose 2 --test=pipeline_atq --stlist=a
--wlcores=20-23 --nb_eth_queues 4

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

show more ...

app/eventdev: check timer adadpters number

Fix SEGFAULT when nb_timer_adapters command line parameter is
set to 0.

Fixes: 98c6292105d4 ("app/eventdev: add options for event timer adapter")
Cc: stab

app/eventdev: check timer adadpters number

Fix SEGFAULT when nb_timer_adapters command line parameter is
set to 0.

Fixes: 98c6292105d4 ("app/eventdev: add options for event timer adapter")
Cc: stable@dpdk.org

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>

show more ...

eal: rename lcore master and slave

Replace master lcore with main lcore and
replace slave lcore with worker lcore.

Keep the old functions and macros but mark them as deprecated
for this release.

T

eal: rename lcore master and slave

Replace master lcore with main lcore and
replace slave lcore with worker lcore.

Keep the old functions and macros but mark them as deprecated
for this release.

The "--master-lcore" command line option is also deprecated
and any usage will print a warning and use "--main-lcore"
as replacement.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>

show more ...

app/eventdev: add options for mbuf and packet sizes

Add options to set mbuf size and max packet size which allow the user to
enable jumbo frames and Rx/Tx scatter gather.
Arrange `struct evt_options

app/eventdev: add options for mbuf and packet sizes

Add options to set mbuf size and max packet size which allow the user to
enable jumbo frames and Rx/Tx scatter gather.
Arrange `struct evt_options` based on ascending order of data type to
make it more readable.

Packet mbuf size can be modified by using `--mbuf_sz=N`.
Max packet size can be modified by using `--max_pkt_sz=N`.
These options are only applicable `pipeline_atq` and `pipeline_queue`
tests.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>

show more ...

replace snprintf with strlcpy

Do a global replace of snprintf(..."%s",...) with strlcpy, adding in the
rte_string_fns.h header if needed. The function changes in this patch were
auto-generated via

replace snprintf with strlcpy

Do a global replace of snprintf(..."%s",...) with strlcpy, adding in the
rte_string_fns.h header if needed. The function changes in this patch were
auto-generated via command:

spatch --sp-file devtools/cocci/strlcpy.cocci --dir . --in-place

and then the files edited using awk to add in the missing header:

gawk -i inplace '/include <rte_/ && ! seen { \
print "#include <rte_string_fns.h>"; seen=1} {print}'

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>

show more ...

app/eventdev: add option for global dequeue timeout

Add option to provide a global dequeue timeout that is used to create
the eventdev.
The dequeue timeout provided will be common across all the wor

app/eventdev: add option for global dequeue timeout

Add option to provide a global dequeue timeout that is used to create
the eventdev.
The dequeue timeout provided will be common across all the worker
ports. If the eventdev hardware supports power management through
dequeue timeout then this option can be used for verifying power
demands at various packet rates.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>

show more ...

app/eventdev: fix typos in timer adapter options

The options names in code and doc are not the same.

Fixes: 98c6292105d4 ("app/eventdev: add options for event timer adapter")

Suggested-by: Thomas

app/eventdev: fix typos in timer adapter options

The options names in code and doc are not the same.

Fixes: 98c6292105d4 ("app/eventdev: add options for event timer adapter")

Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>

show more ...

app/eventdev: add options for event timer adapter

Add options to configure expiry timeout, max number of timers and number
of event timer adapters through command line parameters.

Signed-off-by: Pa

app/eventdev: add options for event timer adapter

Add options to configure expiry timeout, max number of timers and number
of event timer adapters through command line parameters.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

show more ...

app/eventdev: add burst mode for event timer adapter

Add burst mode for event timer adapter that can be selected by passing
--prod_type_timerdev_burst.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@

app/eventdev: add burst mode for event timer adapter

Add burst mode for event timer adapter that can be selected by passing
--prod_type_timerdev_burst.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

show more ...

app/eventdev: add event timer adapter as a producer

Add event timer adapter as producer option that can be selected by
passing --prod_type_timerdev.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@cav

app/eventdev: add event timer adapter as a producer

Add event timer adapter as producer option that can be selected by
passing --prod_type_timerdev.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

show more ...

app/eventdev: add ethernet device producer option

Add command line option --prod_type_ethdev to specify that the events
are generated by ethernet device.

Signed-off-by: Pavan Nikhilesh <pbhagavatul

app/eventdev: add ethernet device producer option

Add command line option --prod_type_ethdev to specify that the events
are generated by ethernet device.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

show more ...

app: use SPDX tag for Cavium copyright files

Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>

app/testeventdev: use service cores

Use service cores for offloading event scheduling in case of
centralized scheduling instead of calling the schedule api directly.
This removes the dependency on d

app/testeventdev: use service cores

Use service cores for offloading event scheduling in case of
centralized scheduling instead of calling the schedule api directly.
This removes the dependency on dedicated scheduler core specified by
giving command line option --slcore.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

show more ...