drm: Update to Linux 4.15.18

* Create /dev/dri/renderD* devices
Generally handle /dev entries creation as close to Linux as possible.

* Add drm master support
Sync authentification code with Li

drm: Update to Linux 4.15.18

* Create /dev/dri/renderD* devices
Generally handle /dev entries creation as close to Linux as possible.

* Add drm master support
Sync authentification code with Linux 4.15.18

* handle vm_mm->mmap_sem in ttm page fault operations

* Update dma-fence code from OpenBSD

* This commit contains sleep/wakeup and other changes
from Matthew Dillon <dillon@apollo.backplane.com>

show more ...

drm: Update to Linux 4.12.14

* Initial Geminilake support

* Support improvements and model-specific bug fixes for Broxton, Haswell,
Broadwell, Skylake and Kabylake hardware

* Various generic i91

drm: Update to Linux 4.12.14

* Initial Geminilake support

* Support improvements and model-specific bug fixes for Broxton, Haswell,
Broadwell, Skylake and Kabylake hardware

* Various generic i915 bug fixes, including page flipping and memory
corruption issues

* Minor radeon bug fixes

show more ...

drm: Update base driver to Linux 4.10.17

Thanks to Matthew Dillon <dillon@apollo.backplane.com>
for some VM fixes.

drm/i915: Update DRIVER_DATE to 20161024

drm/i915: Update base driver to 20160808

drm/i915: Update base driver to 20160725

drm/i915: Update to Linux 4.8.17

* Broxton, Valleyview and Cherryview support improvements

* Broadwell and Gen9/Skylake support improvements

* Broadwell brightness fixes from OpenBSD

* Atomic mod

drm/i915: Update to Linux 4.8.17

* Broxton, Valleyview and Cherryview support improvements

* Broadwell and Gen9/Skylake support improvements

* Broadwell brightness fixes from OpenBSD

* Atomic modesetting improvements

* Various bug fixes and performance enhancements

show more ...

drm/i915: Update to Linux commit b224c4dc70cdd5f42d24a7057148c6ace90e4f4e

"drm/i915: Unbreak interrupts on pre-gen6"

drm/i915: Update to Linux commit 1f15b76f1ec973d1eb5d21b6d98b21aebb9025f1

"Separate GPU hang waitqueue from advance"

drm: Update generic, ttm and radeon code to Linux 4.9

* Generally cleanup non driver-specific code and increase its
robustness

* DisplayPort support improvements

* Atomic modesetting improvement

drm: Update generic, ttm and radeon code to Linux 4.9

* Generally cleanup non driver-specific code and increase its
robustness

* DisplayPort support improvements

* Atomic modesetting improvements

* Radeon performance and stability improvements

* drm/i915 stays based on Linux 4.7.10 with Linux 4.19 changes
for now

Reviewed-by: Romick

show more ...

drm/i915: Update to Linux 4.7.10

* Various bugfixes, including GPU-specific ones on Ironlake and more
recent hardware.
Runtime power management and atomic modesetting have been specially
impro

drm/i915: Update to Linux 4.7.10

* Various bugfixes, including GPU-specific ones on Ironlake and more
recent hardware.
Runtime power management and atomic modesetting have been specially
improved.

* Fix Hardware hangs on Ironlake, Sandybridge, Ivybridge, Skylake and
Kabylake GPUs

* Fix various display flickering issues, including PSR, Broadwell and
Display-port specific ones

* Kabylake support is no longer considered experimental

* Color management has been added for Broadwell, Skylake, Kabylake as
well as Cherryview and Broxton GPUs. The intent is to obtain more
accurate color representation on various types of panel.

show more ...

drm/linux: u64 is unsigned long long

* Some basic Linux types were badly defined, causing unnecessary
differences in various lines of driver code such as kprintf
statements

* Make u64 and __u64

drm/linux: u64 is unsigned long long

* Some basic Linux types were badly defined, causing unnecessary
differences in various lines of driver code such as kprintf
statements

* Make u64 and __u64 unsigned long longs like in Linux

* Reduce differences with Linux 4.6 in the generic drm code as well
as drm/i915 and drm/radeon drivers

* While there, make the include/ directory hierarchy more similar
to the one in Linux 4.6

show more ...

drm/i915: Update to Linux 4.6

* Skylake and Kabylake support improvements

* FBC (FrameBuffer Compression) now enabled by default on Haswell and
Broadwell GPUs

* PSR (Panel Self Refresh) support

drm/i915: Update to Linux 4.6

* Skylake and Kabylake support improvements

* FBC (FrameBuffer Compression) now enabled by default on Haswell and
Broadwell GPUs

* PSR (Panel Self Refresh) support improved, now enabled by default on
Valleyview, CherryView, Haswell and Broadwell

* Improved DSI panel support

* HDMI hotplug fixes

* Various bugfixes everywhere

show more ...

drm/i915: Update to Linux 4.5

* Mostly bugfixes. Lots and lots of bugfixes.

* Skylake and Broxton support improvements

* Initial Kabylake support

drm/i915: Update to Linux 4.4

* Broxton and Skylake support improvements

* Cherryview specific fixes

* Atomic modesetting conversion progress

* Improved validation of video modes. Some low-power

drm/i915: Update to Linux 4.4

* Broxton and Skylake support improvements

* Cherryview specific fixes

* Atomic modesetting conversion progress

* Improved validation of video modes. Some low-power chips can't
drive all DP screens and this is now detected by the driver.

* PSR and FBC improvements and bug fixes

* Workarounds for some specific HDMI monitors needing more time than
allowed by the spec to handle hot-plug events

* As usual, various fixes for little issues here and there

show more ...

drm/i915: Update to Linux 4.3

* Generic stability improvements

* Stability fixes and support improvements for various GPU families, including
Broxton, Valleyview, Cherryview, Broadwell and Skylak

drm/i915: Update to Linux 4.3

* Generic stability improvements

* Stability fixes and support improvements for various GPU families, including
Broxton, Valleyview, Cherryview, Broadwell and Skylake

* Skylake support is no longer considered experimental

* HDMI now uses 12 bits per color component if the screen supports it.

* Power saving features improvements: many fixes have been made to the
PSR (panel self refresh) and FBC (framebuffer compression) code.
These features are not yet enabled by default though.

show more ...

drm/i915: Update to Linux 4.2

* Work in progress atomic modesetting support

* Broadwell support improvements

* Skylake support improvements, including runtime power management.
Starting from Lin

drm/i915: Update to Linux 4.2

* Work in progress atomic modesetting support

* Broadwell support improvements

* Skylake support improvements, including runtime power management.
Starting from Linux 4.2, a separate firmware blob is required to save
and restore the state of display engines in some low-power modes. These
low-power modes have been forcibly disabled in the DragonFly version of
this driver in order to keep it blob-free.

* Basic Broxton (BXT) support

* Various Displayport improvements including optimized link training,
increased robustness, and automated support for compliance testing

* Execlist overhead reduced

* Frequency boost tuning

* Plenty of bugfixes all around

show more ...

drm/i915: Update to Linux 4.1

* Valleyview support has been vastly improved and is no longer considered
preliminary

* Skylake support improvements: runtime power management, turbo and sleep
sta

drm/i915: Update to Linux 4.1

* Valleyview support has been vastly improved and is no longer considered
preliminary

* Skylake support improvements: runtime power management, turbo and sleep
states should now be fully operational.
Many workarounds have been added for Skylake specific issues

* Preliminary changes to prepare for Broxton (future Atom SOCs) support

* Distinguish hardware minimum and user minimum frequencies. Set the GPU
frequency to the hardware minimum on idle in order to reduce power usage

* DRRS (dynamic refresh rate switching) is now enabled where supported.
The idea is to reduce the refresh rate of the panel to save power when
nothing changes on the screen

* DP deadlock bugfixes and improved link rate computation. Intermediate
link rate support for eDP 1.4

* XenGT client-side support. This is paravirtualization to allow virtual
machines to tap into the render engines

* Plenty of internal work to prepare for atomic mode setting

* Lots of other smaller work all over such as added documentation, dead
UMS code removal, vblank interrupt cleanings, etc...

show more ...

drm/i915: Upgrade to Linux 4.0

* Basic Skylake support

* Panel Self-Refresh (PSR) now supported on Valleyview and Cherryview

* Preparations for atomic display updates

* Performance improvements o

drm/i915: Upgrade to Linux 4.0

* Basic Skylake support

* Panel Self-Refresh (PSR) now supported on Valleyview and Cherryview

* Preparations for atomic display updates

* Performance improvements on various GPU families, including Cherryview,
Broadwell and Haswell

* GPU frequencies are now kept at a minimum of 450MHz when possible
on Haswell and Broadwell, ensuring a minimum experience level for
various types of workloads

* Improved reset support for gen3/4 GPUs, which should fix some OpenGL
crashes on Core 2 and pre-2012 Atom machines

* Better sound/graphics driver synchronization for audio over hdmi support

* As usual, small bugfixes and stability improvements here and there

show more ...